Jump to content

[1.4.x-1.8.x] Airplane Plus - R26.4 (Fixed issues/Github is up to date) (Dec 21, 2019)


blackheart612

Recommended Posts

1 hour ago, NeoFatalis said:

So how does it work in SXT?

I may have an idea, there's a mesh outside and inside, just like mine. The outside mesh is facing outside when viewed from IVA, therefore it's completely transparent (back of meshes are transparent). The inside mesh of the glass faces the IVA and has to be transparent to see outside.
Was an idea I wanted to try but didn't proceed because lighting animation will only occur in cockpit lights since it has the lights in IVA, therefore, the visor glass won't light up, which kinda ticks me off. So I made the visor completely transparent. I'm still not sure if that would work, but I'm guessing it will. If people want it to be non-transparent outside, I can try making it like that.

Link to comment
Share on other sites

After the success of my little Bell 47 I've started building bigger choppers and found the Beluga engine seriously lacking.
The 'engine' fits nicely on a 2.5m or mk2 fuselage or tank. But anything that even remotely resembles a helicopter quickly outweighs the Beluga's lifting capabilities. The bare bone passenger chopper below doesn't even have fuel yet, the tanks are dry, and it's already seriously overweight. And the blades look too short.
I would really like to see the the engine power increased to 100 and the blade diameter extended by about 50%. A larger tail rotor would be an added bonus.

screenshot46.png

Using the Gemini is only a partial solution. The blades and housing don't fit the 2.5m/mk2 that well and it is WAAAAAAAY too powerful for a craft this size.

Edit: I manually edited the Beluga to produce a max thrust of 100 and it makes it oodles more useful. But it remains small.

Edited by Tex_NL
Link to comment
Share on other sites

You're gonna implement A320 engines? Damn! Now i can finally make a real airliner... But do you have any idea when the release date is gonna be? 

1 hour ago, blackheart612 said:

Has anybody seen the CFM56's reverse thrust? It's absolutely fantastic (looks like a flower). Now I have to try and make it. I'll use stock animation modules for this one, just like Goliath but sized as 1.25m.

NVJm8sD.pngyaHVey2.png

 

Link to comment
Share on other sites

7 minutes ago, FlyHighAviator said:

You're gonna implement A320 engines? Damn! Now i can finally make a real airliner... But do you have any idea when the release date is gonna be? 

 

Based on regular release date, in more or less two weeks. Depends on how much work I'll get done and how fast I can do em :P 

By the way, this is 1.25m sized. It's planned to go with the Airliner parts.

Link to comment
Share on other sites

Just now, blackheart612 said:

Based on regular release date, in more or less two weeks. Depends on how much work I'll get done and how fast I can do em :P 

Ehrmagherd... :o but take enough time, rather a long wait but an awesome finished product than a quicker release date with an unfinished product. :wink: 

Link to comment
Share on other sites

10 hours ago, blackheart612 said:

@Tex_NL Yes, the solution will be the plan to add the Mi-8 rotors. I've started to develop rotors again, and I know it will be a pain with all these small parts. :P But it's gonna be awesome. I've developed the coaxial rotors first.

[picsnip]

By the way, most rotors are intended to be Mk-1 anyway.

Sweet. Engines like that will fit nicely on 2.5m/mk2 parts. They would even look good on a Sikorsky S-64 Skycrane replica.

Link to comment
Share on other sites

@FlyHighAviator It's about my regular pace. I just fail sometimes at testing stuff but things often get patched on next release if I missed anything.

@XOC2008 Can't say that didn't cross my mind. Definitely possible :) I'd like to see it.

@Tex_NL The Coaxial is for Mk1 as well. I just think helicopters should mostly be Mk-1 for some reason. But the Mi-8 will surely be sized for Size 2.

Link to comment
Share on other sites

10 minutes ago, blackheart612 said:

@FlyHighAviator It's about my regular pace. I just fail sometimes at testing stuff but things often get patched on next release if I missed anything.

@XOC2008 Can't say that didn't cross my mind. Definitely possible :) I'd like to see it.

@Tex_NL The Coaxial is for Mk1 as well. I just think helicopters should mostly be Mk-1 for some reason. But the Mi-8 will surely be sized for Size 2.

Would you be doing the older rounded version or the newer MATSh version with the longer nose? And can't wait to see it either way!

Link to comment
Share on other sites

@XOC2008 Probably the regular one for a clear view Size 2 cockpit, if I were to choose.

@FlyHighAviator It's been asked before, It's not compatible. And so far, I'm not planning to make it as well. But people can post configs here if they want, or just ask for permission if they want to make a patch in a different thread. I'm gonna be up for it either way.

Link to comment
Share on other sites

@blackheart612 First of all i just want to thank you for all your hard work...i have been using this mod extensively and i very much enjoy building aircraft. I have a small request ....IF possible  could you please implement TweakScale to your parts so i can resize them to my needs. I have very many aircraft that would greatly benefit from your part selection, but the down side it that they do not fit the size criteria i need. So if you would have time in your future releases, I would greatly appreciate it. Thank you again very much.  

Link to comment
Share on other sites

3 minutes ago, mechanicH said:

@blackheart612 First of all i just want to thank you for all your hard work...i have been using this mod extensively and i very much enjoy building aircraft. I have a small request ....IF possible  could you please implement TweakScale to your parts so i can resize them to my needs. I have very many aircraft that would greatly benefit from your part selection, but the down side it that they do not fit the size criteria i need. So if you would have time in your future releases, I would greatly appreciate it. Thank you again very much.  

 

1 hour ago, blackheart612 said:

 

@FlyHighAviator It's been asked before, It's not compatible. And so far, I'm not planning to make it as well. But people can post configs here if they want, or just ask for permission if they want to make a patch in a different thread. I'm gonna be up for it either way.

Replace @FlyHighAviator with @mechanicH and we have an answer.

Quite literally combining the three posts above yours.

Edited by Tex_NL
Link to comment
Share on other sites

It's not hard to make the parts Tweakscale compatible, or make a custom Tweakscale patch for the parts themselves. Either go into the cfg file for the part and add at the bottom, BEFORE the closing bracket:

MODULE

{

name = TweakScale

type = stack (or free)

}

 

OR you can create a custom tweakscale cfg to put in the main Airplane+ folder, name it for example APlus_Tweakscale.cfg and add in the following lines per part you want compatible:

@PART[partname found in each part's cfg]
{
    %MODULE[TweakScale]
    {
        type = stack (or free)
    }
}
 

Link to comment
Share on other sites

7 minutes ago, XOC2008 said:

It's not hard to make the parts Tweakscale compatible, or make a custom Tweakscale patch for the parts themselves. Either go into the cfg file for the part and add at the bottom, BEFORE the closing bracket:

MODULE

{

name = TweakScale

type = stack (or free)

}

 

OR you can create a custom tweakscale cfg to put in the main Airplane+ folder, name it for example APlus_Tweakscale.cfg and add in the following lines per part you want compatible:

@PART[partname found in each part's cfg]
{
    %MODULE[TweakScale]
    {
        type = stack (or free)
    }
}
 

Almost all APP part names end with the word 'prop'. That could be your way in.

Edited by Tex_NL
Link to comment
Share on other sites

Spoiler

@PART[bigwing]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[elevon2b]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[smallwingConnector1]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[smallwingConnector2]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[smallwingConnector3]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[smallwingConnector4]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[smallwingConnector5]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[smallwingConnector6]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[smallwingConnectortip]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[stubbytinynose]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[airbuscockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[bellcockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[citationcockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[concordecockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[falconcockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[fightercockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[fighterinlinecockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[mk1DroneCore]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[oh6cockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[oldfightercockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[zerocockpit]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[51prop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[chaikaprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[fokkerprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[hawkerprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[spadprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[herculesprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[KP12]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[predatorprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[tbmProp]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[109Prop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[corsairprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[fighterProp]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[merlin]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[spitfiremerlin]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[yakprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[bellprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[belltail]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[blackhawkprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[chinookprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[powerprop]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[powertail]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[airramp]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[mk1cargodoor]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[mk1dronedoor]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[passengeroor]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[JuniorFuselage]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[Mk1JuniorStructural]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[mk2hAdapter]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[mk2hLiquid]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[mk2hboom]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[mk2mk2h]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[shortboom]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[shortboomb]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[size2CrewCabin]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[size2Fuselage]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[S2Structural]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[navlight]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

@PART[landingskid]
{
    %MODULE[TweakScale]
    {
        type = free
    }
}

For anyone who want TweakScale for all parts.... here you go .....TY to @XOC2008 and @Tex_NL

You guys are AWESOME!!!!

 

Edited by mechanicH
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...