MarkusF

Let me now tell you about the Vall landing: First, the still unmanned new Laythe Spaceplane had to meet with the old one for the crew transfer. Afterwards the old spaceplane met with the refueller, as it still had a lot of fuel, mainly oxidizer, left in it, which it transferred to the refueller for later use. Then the spaceplane made its transfer to Vall, in order to meet with the Vall lander. The crew transferred to the lander, and it was refuelled from the spaceplane. Let's go down to Vall: Woohoo! And lets get back into orbit: To meet with the spaceplane and get back to Laythe: Next task was to take care about our fuel production on Pol. Turns out, the amount of ore is just based on the biome and not on the specific location (or the surface scanner just doesn't show the difference...), so there was not much use for the scanner, and no need to relocate the outpost. So the next goal is to land the power upgrade. Landing on a planet is easy, landing on a docking port not so much. And I forgot to add any RCS thruster... Such a precise landing, with the need of tilting the vessel in order to change horizontal speed makes it extremely difficult. Luckily at somepoint I managed to "land" on the orange fuel tank and get closer and closer to the docking port with several small hops until the docking ports started to pull towards each other. - - - Updated - - - Okay, there's a problem with the Pol Mining operation... The fuel transporter, planned to pick up fuel on Pol and transport it to Laythe, has been destroyed by a kraken during descent. The vessel's fuel tank exploded, the flight log stated "crashed into Pol", even though I'Ve been well above the surface during the final descent right next to the outpost. Unfortunately the lander is also destroyed when loading my last quicksave made during the descent. Luckily I've send some fuel to Laythe directly from Kerbin.

Let me tell you now about my fuel deliver for Laythe orbit. I wanted to save as much fuel as possible, in order to have the maximum amount available for the Laythe spaceplane. In order to do this, I was going for a flyby at one of the inner planets before making the final encounter with Laythe. As it turned out, the refueller didn't even have a chance to get into a Jool orbit without a flyby at Tylo, as Tylo had been right in the path the refueller was going anyway. Altogether it took only 1600m/s from entering Jool's SOI to a 100km orbit around laythe. What you can't see in this screenshot, because it's already executed, is a small manouver I did upon entering the system, in order to get into the same plane as the inner moons. I first set-up the retrograde node at periapsis to get an encounter with Laythe after the Tylo fly-by and then adjusted the planechange. The Tylo fly-by has been setup in a way, that it gives me a new periapsis at Laythe's orbit, with an as low as possible apoapsis. After that it took only two small manouver nodes (blue and yellow) in order to get the final encounter with Laythe. When planning the trip, I thought that I would have to take some liquid fuel out of the main S3-14400 fuel tank to get to Laythe, however I didn't even touch that fuel and still had 2/3 of my last cruise stage's fuel left (~1000m/s). Tylo flyby: Encounter with Laythe and separation of the second to last stage: And finally meeting with the spaceplane:

Before I'm going on telling about the other vessels arrived at Jool, there's a different mission I've just started, as a launch window came up. No Kerbal has ever set foot onto Eeloo, so there's time for a manned (or kerbaled?) mission to go there. The preparations for this flight have been pretty simple, as we can just reuse the old design of the Moho mission, which should fit for Eeloo according to the delta-v chart. The only updates are: RTGs instead of solar panels and a docking port at the bottom of the lander module. I've missed that one on the Moho and Dres missions. It's not required for the mission itself, but without it we can't refuel the lander and reuse it at a later time. So here's the rocket: Stage 1: Stage 2: Stage 3: Stage 4: - - - Updated - - - Okay, so what's the overall progress? Right now, I've landed something on all bodies of the Kerbol system, except for Vall. And Kerbals have set foot on nearly all bodies, except for Eve, Eeloo, Vall, Tylo, Bop and Pol. A manned Eeloo operation is on its way and a lander for Bop and Pol as well as one for Vall are waiting in their target orbit. The lander for Pol is waiting in Pol orbit, already manned, ready to land. After visiting Pol it has to refuel in Pol orbit for the trip to Bop. The lander for vall is waiting empty and unmanned for the Laythe spaceplane to meet with it, refuel it, and bring two Kerbals for the landing. Taking into account the missions which are on the way, the only bodies waiting for a visit by a Kerbal are Eve and Tylo, which might be the two most difficult ones, especially if you don't want the Kerbals to get stranded on the surface.

Okay, all my vessels have arrived at Jool, and reach their target bodies. I will tell about all of them later, except for the unmanned Tylo lander. I'm gonna tell about this one right now. I won't tell about getting into Tylo orbit, as it has been the same as always. For the descent, I've lowered periapsis to about 1km. At periapsis I've started burning horizontal, in order to decrease the horizontal surface speed. With dropping horizontal speed I increased pitch, in order to to keep the vertical speed at about 0. When the horizontal speed reached zero, I waited for the right time for the suicide burn.

So as all my vessels for Jool are on their long journey, I accepted a contract, asking me to catch a class A asteroid and bring it into Kerbin's SOI. Even though the asteroid was going to fly through Kerbin's SOI on its own, I couldn't figure out anything about its path through the Kerbin system while inside the tracking station. Therefore I've just built a vessel which hopefully has enough delta-V to bring the asteroid into an orbit. Turns out, the vessel had way more fuel than required... As soon as the vessel was on the launchpad, I've been able to select the asteroid as target and could see its path through the Kerbin system, so I tried to launch into the correct orbit for a later rendezvouz. And finally I've put it into a nice orbit, 100km above Kerbin.

I've just accepted another contract, asking me to test the launch escape system while landed on Tylo. Yeah, even an unmanned lander prooved to be pretty hard to design, let's just hope it works as expected. The lander itself should be able to launch back into Tylo's orbit after landing, so this will be a nice trial run for a later manned mission to Tylo's surface.

I had set all chutes to open at 5km above the surface, so I've had plenty of time to cut some chutes. I actually had to cut three chutes on the right side (with the orange fuel tank), as the outpost was descending like a dart towards the ground at a vertical speed of about 13m/s. I first cut the two on the outer end (monoprop tank), which helped a lot, but the outpost had still been slightly lower on the side with the refinery. I didn't want it to touch down only on the two outermost landing legs, so I've cut one of the innermost chutes on the orange tank, which turned out to be just enough to make it level.

As my new vessels for Jool's moons are waiting in Kerbin orbits for the launch window to Jool, I took care of the refinery designated for Duna's surface. There's also a contract waiting to be completed, asking to mine 1000 units of ore on Duna. First I had to split up the cruise configuration and assemble the outpost into its final configuration, while in orbit around Duna: Finally I had to reattach the cruise stage, to transfer some fuel into the outpost for the deorbit burn. I had to manually cut some chutes, in order to make a level landing. Touchdown speed was about 12m/s.

And here's the power upgrade module for the Pol Refinery. It contains 4 RTGs, as well as 12 large Solar Panels and will be docked on top of the refinery.

Just in case my upgrades to the Pol refinery don't work as expected, and in order to not have to wait for the refining, I'm gonna send an additional S3-14400 fuel tank into Laythe orbit, in order to refuel the Laythe Spaceplane. The amount of oxidizer has been reduced to 3000, which is enough to refuel the Laythe Spaceplane twice. While the tanks liquid fuel is full at launch, I estimate it to contain about 4500kg upon arrival at Laythe. I'm gonna to use a flyby at one of the inner Jool's moons, in order to save some fuel when going to intercept Laythe, like I did with the Jool-6-Challenge probe. Stage 1: Stage 2: Stage 3: Stage 4: - - - Updated - - - Next is the Narrow-Band scanner for Pol. It's a small payload, so there are no difficulties in designing a rocket to bring it to Jool. Stage 1: Stage 2: Stage 3:

I've just landed my Pol Miner/Refinery, and realized, that I forgot to install a narrow band scanner and a surface scanning module, so I can't really find a good spot to land on. I only have the basic ore information from the survey scanner. I've landed it anyway, but I have to send a small scanner craft at the next launch window (+68 days) in order to find a good landing spot. Another problem is the energy consumption, so I guess I should also send a small module with some RTGs up there. Let me tell you about the landung of the refinery: During the burn to reduce horizontal speed, I had to reduce thhe maximum thrrust of single engines, as the vessel started to rotate due to tthe shifting center of mass. - - - Updated - - - Unfortunately, all my other vessels around Jool's moons depend on the fuel created on Pol, so there's nothing to do right now, until we improve the refinery.

So there's another update: First I've brought the refinery for Duna into a stable orbit around it. However, I haven't assembled and landed it yet. Then Valentina & Co returned to Kerbin after visiting the surface of Dres. Unfortunately, they arrived on the night-side of Kerbin, so there was no opportunity for a good screenshot: Then I timewarped quite a bit, so all my vessels headed for Jool finally arrived. First the manouver planning for the new Laythe Spaceplane and the arrival at Laythe: All vessels have been parked into stable orbits around their target bodies, however I haven't taken screenshots of them. I will do so, when I' going to fullfill their tasks, like landing on Pol. Now the whole Jool-6-Challenge. The contract states, that I have to fly-by all bodies and finally end up in a sub-orbital orbit on Tylo: Arrival at Jool: Due to the limited storage for electricity in combination with an ion engine, I can only make burns in chunks of about 270m/s. Initially I burned the full 270m/s at Jool's periapsis, to get into a stable orbit and drop the apoapsis as far as possible. Next, I burned at apoapsis, to get an encounter with Laythe, which also drops the apoapsis due to the fly-by: Fly-By Laythe: Completed After visiting Laythe, I burned at the apoapsis, in order to get an encounter with Vall. Fly-By Vall: Completed Next I planned for another Fly-By at Laythe, flollowed by a Fly-By at Pol: Fly-By Pol: Completed Next I planned for an encounter with Bop, at the point, where Bop's orbital plane intersects the inner planets' orbital plane, so I won't have to change my plane in order for the final encounter with Tylo. Fly-By Bop: Completed Unfortunately, I have a high orbital energy now, due to the high apoapsis, therefor I planned to use a first fly-by at Tylo in order to decrease the apoapsis, and will burn into a stable orbit and finally go into sub-orbital flight on the second encounter. And finally the burn to get into a stable orbit. Sub-Orbital flight on Tylo: Completed Reward 2,500,000 credits! Unfortunately, it was night when the probe crashed onto the surface of Tylo. And finally my unmanned Eeloo probe arrived at its destination, after a very long journey.

Yay, Cookies :-) Okay, so I've launched three additional vessels to Jool. First a small ion-powered probe for the Jool-6-Challenge. Second is a scanner-probe for Vall: And last but not least, a lander to bring two Kerbals to Vall's surface and back into orbit. The plan is, that Jeb + 1 are gonna use the Laythe spaceplane to make a transfer to Vall, board the Lander, get down and back up, and return to Laythe using the spaceplane. Now there are 7 vessels heading for Jool, 1 for Duna, 1 for Eeloo and one is returning to Kerbin from Dres.

Okay, here's a bit more progress, I've launched a fuel-transporter in order to transport fuel from Pol's surface to Laythe orbit as well as a small lander, to land a single Kerbal on Pol and Bop. Oh, and I just realized, that there's an open "Jool 6 challenge" contract, asking me to fly by every body in the Jool system, so I have to design a probe for that task, too, as long as the transfer window Jool is still open.

I'm still going through the stuff I've already done few months ago, but haven't reported about it, yet. Okay, here's the next thing: As the old "Laythe Flyer", the one which is with Jeb in Laythe orbit at the moment, proofed difficult to fly (especially difficult to land), I designed a new one in order to send it to Laythe as a replacement. This time it features two nuclear engines in addition to the ramjet and rapier engines. In order to make it to Laythe, it has to refuel in Kerbin orbit after the ascent. After the refueling, I've set the refueler on a reentry course to be destroyed. This was not planned for, but I nearly hit KSC on the return. That was pretty close! And the last thing I did before I took a break from reporting in this thread was to launch a refinery outpost, supposed to land on Pol: As we're still at the launch window to Jool, I have to design a fuel-transport vessel, in order to pick up fuel on Pol and transport it to Laythe orbit.