faraon

I got a funny situation with a camp contract came with one of the tourists being named the same as one of my existing Kerbonats, it didn't spawn another Kerbal tourists of the same name so I will probably have to retrieve the my guy from my Mun Station an bring him back together with the tourists. Also the visit asteroid contract is really OP. The 500k is enough to get an asteroid and bring it to Kerbin, but for subsequent contracts I can take my SSTO and do it for 8K in fuel. Maybe the contract should have both a docked to asteroid while in Kerbin Orbit and docked to asteroid while in Kerbol orbit. This way the reward makes sense since You have to either go get a new asteroid or fly the one You have in Kerbin orbit outside it's SOI.

https://github.com/toadicus/AntennaRange/wiki/Compatibility-Patches if You forget later It's easy to find just go to github (through the source link on space dock or CKAN) and click wiki

I've had a the same problem as @jwenting after 2 days of installing and testing mods it seems I've found the culprit. In the ORIGAMI antenna pack there is an old compatibility patch for RemoteTech(tested with just AR installed). It's existence is what breaks AntennaRange. Removing it or using the version of the antenna pack posted in the forum by rasta013 (with patches for AntennaRange and RemoteTech using :NEEDS instead of :FOR like the older patches did) works for me.

tried that but it really didn't help so I removed the config for now, thanks for the help

From my understanding of the config it already is 0 at 0 density emission = 0.0 0.0 // Curve for emission like stock emission = 0.05 0.0 // Curve for emission like stock emission = 0.2 0.5 // Curve for emission like stock emission = 1.0 1.8 // Curve for emission like stock

If anybody is interested You can temporarily fix Your broken contract to allow for completion. paste this code is into "GameData\CrowdSourcedScience\planets\000_default\S tockScienceProbeTweaks.cfg" it will make the failed experiment work. The source is taken from the Stock Science Tweaks ProbeReport.cfg (I just switched telemtryReport to probeReport) @PART [*]:HAS[@MODULE[ModuleCommand],#vesselType[Probe]] { MODULE { name = ModuleScienceExperiment experimentID = probeReport experimentActionName = Probe Report resetActionName = Discard Telemetry reviewActionName = Review Telemetry useStaging = False useActionGroups = True hideUIwhenUnavailable = True rerunnable = True xmitDataScalar = 1.0 } } After that it's probably best to remove the offending file.

Hey I think have the same problem, and it happens exactly as You said, after going from the flight center to the ship it works for 10-30 s after that nothing, happened to me in KSC in orbit of Kerbin, Mun and Minmus. Started between 3 weeks ago and 3 days ago ( I haven't played between that time).

big map works ok on the dev build with orbits and without the small map on the other hand either I don't know how to use or is a bit broken, it show the swaths when I start scanning but after I complete the MULTI scan it shows only grey, I need to get more scanners going to check it as now I only used the MULTI one on my first satellites EDIT: Checked more scanners and the HI and LO scanners and they work on the small map, have no time to do the BTDT scans

Great work, SCANsat work my maps are transmitting. Good job on quick patching.

hey I had the same thing happen to me an managed to reproduce it same situation Kerbal in rover on command chair and disconnected from a ship with a capsule, the clone exits the capsule only one ERR found [LOG 10:29:29.757] [EVAPartResource] Caught OnCrewOnEva event to part () containing this resource (ElectricCharge) [LOG 10:29:29.758] [00:00:00]: Jebediah Kerman from rover bay went on EVA. [LOG 10:29:29.785] FF: vessel situation change for kerbalEVA (Jebediah Kerman), situation changed from FLYING to ESCAPING [ERR 10:29:29.823] ScienceAlert, StorageCache: Active vessel is not monitored vessel. [LOG 10:29:29.846] FF: vessel situation change for kerbalEVA (Jebediah Kerman), situation changed from ESCAPING to FLYING [LOG 10:29:29.889] [FLIGHT GLOBALS]: Switching To Vessel Jebediah Kerman Also there is a negative interaction with ScanSat when science allert is uninstalled ScanSat works ok, when it is installed the data collection goes as planned but when I try to send the data it shows starting and then straight to done without the actual transmission going through the log says that's because there was zero science to transmit but when I do that With ScienceAlert uninstalled everything goes through as planned [LOG 11:00:28.671] [SCANsat] Coverage: 100.0, Science cap: 30.0, Subject value: 1.50, Scientific value: 1.00, Science: 0.00 [LOG 11:00:28.672] [SCANsat] Remaining science: 30.0, Base value: 20.0 [LOG 11:00:28.672] [SCANsat] Resulting science value: 20.00 [LOG 11:00:34.175] ScienceAlert, Projected biome map in 35.21 seconds [LOG 11:00:34.246] [SCANsat] Coverage: 100.0, Science cap: 30.0, Subject value: 1.50, Scientific value: 1.00, Science: 0.00 [LOG 11:00:34.247] [SCANsat] Remaining science: 30.0, Base value: 20.0 [LOG 11:00:34.247] [SCANsat] Resulting science value: 20.00 [LOG 11:00:34.250] Score for transmitter: 0.000 - Data Rate: 340282300000000000000000000000000000000.000 - Data Cost: 0.000 [LOG 11:00:34.251] Score for transmitter: 0.313 - Data Rate: 8.000 - Data Cost: 1.500 [LOG 11:00:34.251] Score for transmitter: 0.313 - Data Rate: 8.000 - Data Cost: 1.500 [LOG 11:00:34.252] Score for transmitter: 0.313 - Data Rate: 8.000 - Data Cost: 1.500 [LOG 11:00:34.252] Score for transmitter: 0.313 - Data Rate: 8.000 - Data Cost: 1.500 my modlist "version": "provided by EnvironmentalVisualEnhancements-HR" "name": "PlanetShine-Config", "version": "provided by AstronomersPack-PlanetShine" "name": "ActiveTextureManagement", "version": "provided by ActiveTextureManagement-x86-Aggressive" "name": "DockingPortAlignmentIndicator", "version": "4.0" "name": "KerbalAlarmClock", "version": "v3.3.0.1" "name": "KerbalEngineerRedux", "version": "1.0.16.6" "name": "ModuleManager", "version": "2.6.2" "name": "EnvironmentalVisualEnhancements-HR", "version": "7-4" "name": "EnvironmentalVisualEnhancements", "version": "7-4" "name": "Toolbar", "version": "1.7.9" "name": "FinalFrontier", "version": "0.7.15-1047" "name": "EditorExtensions", "version": "2.7" "name": "ProceduralFairings", "version": "v3.13" "name": "ToadicusTools", "version": "8a" "name": "KerbalJointReinforcement", "version": "v3.1.3" "name": "PlanetShine", "version": "0.2.2.3" "name": "AstronomersPack-PlanetShine", "version": "Interstellar.V2" "name": "KronalVesselViewer", "version": "0.0.4-1.0" "name": "ScienceAlert", "version": "1.8.6" "name": "SolarScience", "version": "v1.03" "name": "AntennaRange", "version": "1.8a" "name": "EVAManager", "version": "3" "name": "PreciseNode", "version": "1.1.3" "name": "ActiveTextureManagement-x86-Aggressive", "version": "5-0" "name": "AlternateResourcePanel", "version": "2.7.0.0" "name": "Chatterer", "version": "0.9.1" "name": "CrowdSourcedScience", "version": "v3.0" "name": "UniversalStorage", "version": "1.1.0.2" "name": "CommunityResourcePack", "version": "0.4.0" "name": "DMagicOrbitalScience", "version": "1.0.3" "name": "ContractsWindowPlus", "version": "5.1" "name": "HotRockets", "version": "1.0" "name": "SmokeScreen", "version": "2.6.0" "name": "xScience", "version": "4.2" and not from CKAN SCANSAT v11 rc6 the same behavior was for SCANSat v10 "name": "EnvironmentalVisualEnhancements-Config",