Jump to content

FahmiRBLX

Members
  • Posts

    335
  • Joined

  • Last visited

Everything posted by FahmiRBLX

  1. Granted, the new season will feature all the characters weating wrong sizes of costumes & outfits. I wish British Airways's 747-400s remained in service.
  2. How To Train Your Dragon trilogy is just a carbon copy of Skyrim - Dragonborn
  3. Pliers, then... Top 10 pictures you can hear
  4. Forgot to mention this, OP said only a maximum of 3 engines fully clipped into each other (i.e that it seems like 1) is allowed, with a reasonable excuse. Which means, if you've built something on @Servo's level (i.e exploiting fairings or using structural panels and such to build the fuselage based on a real-life aircraft), that should be allowed. If it's and original design, I'm not gonna allow that, but maybe @HolidayTheLeek allow it. Basically to be safe, don't clip the parts that you think is, well, moving. Example, the Goliath engine. You can clip the pylon deep inside the wing, but not partially or fully blocking the bypass duct or the hot stream exhaust on the engine. The same should apply to the Wheesley and every other jet engines, albeit some of them lacking any built-in pylon.
  5. Trust me even internal combustion engines are supposedly dead in Frozen 2
  6. Yes, you can. Post it however you like; two difrerent planes in one post, two identical planes (variant) in one post, or two different planes in two different posts; it's how you'd like to post it. In my opinion, as long as you kept part of the wings exposed (i.e not completely clipped into each other) that should be good. Take my L-50 airliner on Page 5 as an example (it has clipped wings too). Part-clipping for fuel tanks shouls be fine if you're doing it in the name of aesthetics, not in the name of cheating. So yes and no. Basically as long as you keep all the clipped parts exposed and you're clipping parts for aesthetics, that should be fine. In your case, you're making a bigger main wing using multiple clipped FAT wings. Take note however, ease of maintenance will be taken into account, and clipping parts could be bad for technicians. Remember, excessive clipping (e.g clipping two FAT main wings into one that it appeared to be only one instead of two) is prohihited. @FahmiRBLX, Challenge Judge
  7. But how? It appeared on my side, 4 Uno Reverse cards of 4 different colours. EDIT: Fixed it.
  8. Perfectly balanced, as all things should be. (But considering no one really cared about building NMAs until this guy, whatever [smh what the hack I've been talking about?]) Everything aside, this should be able to beat any submission. But remember, it's not as easy as you may think.
  9. If you right-click on your KSP shortcut (Every Steam game installs should have a desktop shortcut), select "Open File Location". Then you'll get lots of folders, such as "KSP_Data", "GameData" (where all your mods reside), "saves", "Screenshots", "Thumbs" and whatnot. Click on the "Screenshots". All screenshots should be sorted from Oldest to Newest, unless you change it to let's say, File Size. [snip]
  10. Have you checked your settings and see on which key is for your screenshot? Have you tried refreshing the "Screenshots" folder? Is it even the correct KSP folder? IIRC Steam games's file directory is a mess (from my own experience of trying to run War Thunder using GPU). You can just use the "Screenshot Mode" (the F2 while pausing one), then take a screenshot using Steam after changing the FOV.
  11. I hope no one give me more rep for now, until like mid- or late-August. It's 550 and I'm gonna go back to making a few siren replicas.

    For those who are wondering, inrroducing Federal Signal 550. Or Federal Signal 500-DHTT if that makes more sense among siren enthusiasts.

    maxresdefault.jpg

    The two-horned version of the 500-SHTT.

    5d349ac18baca1cfa23076c6209e3685.jpg

    Decommissioned Cold War era unit in Los Angeles, California.

    hqdefault.jpg

    4-bar unit in Reedsburg, Wisconsin. Both the Thunderbolt 1003 (same manufacturer as the 500) & 500 has been replaced by a model 2001 from the same manufacturer as of 2020.

    3907633370_c777c64ba2_z.jpg

    6-bar unit in... I don't know, I'm no American.

    latest?cb=201801110525524017912243_40da58a4b7_b.jpg

    Narrow-horn unit, second pictuee in Dundee Township, Michigan. First picture, I believe is the same unit taken more recently. Now is inactive and moved somewhere as a decoration as of 2019.

    So Federal made lots of design changes to the 500 siren (while the 500-DHTT or 550 is a different variant, but doesn't fall under the "design changes" category). All types of horns came in with two options; one with a single-tone chopper & stator[1], and one with a dual-tone chopper & stator[2]

     

    Footnote:

    [1] This is what 'true' sirens (i.e Mechanical Sirens, aka "air raid siren", "old siren") make sound with. A motor spins the Chopper really fast, air gets forces through the chopper and escapes once the holes on the Chopper & Stator line up, hence making a sound. The faster it spins the louder the sound & higher the pitch.

    [2] Two sets of chopper & stator with different number of holes the more the holes the higher the pitch, but sometimes the quieter the sound due to less air getting through.

    [3] There are two types of sirens; Mechanival & Electronic. I've explained the Mechanical one earlier, now the Electronic one. The Electronic one should be the easiest to understand; it's a loudspeaker that plays siren tones.

    [4] Any type of siren can be an air raid (or war in general), nuclear (both power plant & fallout), tornado or tsunami siren. It depends on which emergency does that siren warns of.

    [5] Ever heard about the Chicago's sirens? It's not broken at all, it's a signal called "Alternate Wail". It's essentially the "Wail" everyone's familiar with typical air raid sirens, but with the "Hi-Lo" of a British police siren mixed into it. The result, a High-and-Low tone that is also a Wail in the same time.

    EDIT: Photos aren't mine, credits to the original owners.

  12. Next time, please post the direct link to your image. Like this. Instead of copying the "Image Link", copy the "Direct Link". It has the image's format extension (e.g .png or .jpg) and it'll automatically appear as an image in your post. [Snip] In Desktop, you're supposed to head to your Profile on the Top Right corner of the homepage (The circle where the profile picture supposed to be). Click it, and a drop-down menu appears. Click "Images" in the drop-down menu. That brings you to all the pictures you've uploaded on Imgur. Select a picture you'd like to put in your post (yes, click it). The enlarged picture appears. See the list of links on the right of the picture? Find "Direct Link" (This is what we want), and click on the Blue "Copy" button at the end of the line. Now paste it in your post. Most importantly (sorry if this sounds strict), do not just leave the post, and the thread in general as it is (this is a common problem I've seen with new users). Look up your "Notifications" section (It's the Bell icon) and see if there's any important stuff coming in, such as reviews on your craft, post corrections and thread announcement (You need to follow the thread in case of the announcement). You might alsk need to tweak your notification settings so you don't necessarily get emails for; just a notification under the bell and if you turned it on, Desktop Notifications. Other than that, some advise for screenshots. Take a beautiful one by pressing "Esc" (Or "Escape" for Macs but I'm a Windows user so...) (yes it pauses the game), press F2 (some keyboards require you to press Fn as well) to hide the GUI, bring the camera yo wherever you want, hold Alt & scroll using the mousewheel to change the FOV. Use the lowest FOV (mousewheel down while Alt) for best results. Then take a screenshot. Reset it using "End" key. EDIT 2: Use KerbalX to upload your craft instead of the Steam Workshop. Why, not everyone here uses the Steam version of KSP (plot twist, I must be the unluckiest among all). Two, in the craft page (if you uploaded your own), there'll be some important details about your craft which you may need to type in manually in Steam Workshop. Three, it's made by the member of the forums (All hail @katateochi, the forum member's Odin for his KerbalX), so using a 'homegrown' product will give some support. Even @HolidayTheLeek advised us to use KerbalX to upload craft here.
  13. I get the joke (I'm also a Swiss001 viewer), but there's a better term for that.
  14. Well yes but actually no. Waiter, there's an Escobar bootleg of iPhone 11
  15. Apple wants to grab cash from Android users and move on from Samsung and Android in general
  16. Do you mean "VR"? Just to get everyone noted here. Refer the "V-Speeds" here so everyone can use a better term.
  17. Can you change mine to FahmiRBLX? Was trying to get it uniform.
  18. Welp, I'm ready to create Rikardo Kerman complete with the outift. No full suit however. EDIT: Also maybe no bandana.
  19. Undank but the grass in the background tho
  20. Free Fire is Fortnite but a lot worse (it even has no bullet drop)
  21. Was about to be a judge back in KEA, and when it comes to math that's where I'm struggling with. Flight characteristics & else, I'm good at talking about.
×
×
  • Create New...