pantheis

Members
  • Content count

    98
  • Joined

  • Last visited

Community Reputation

0 Neutral

About pantheis

  • Rank
    Rocketry Enthusiast

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Testing SCANSat? Count me in! Background Kethane scanning has been a dream of mine.
  2. I tried the new version but the test rocket is still having issues. I took a couple of screenshots. The first one shows the errors that happen right after separation when they collide with the tail of the main stage and the boosters explode. I'm not sure if the error generated in this one is related or starts a process that causes the NPE later. I know that not all of my rockets cause issues and I'm beginning to think it has something to do with parts being destroyed when they separate, then later get put on rails. This one shows the NPE spam that starts after their debris travels about 2.5KM away and gets put on rails.
  3. Just saw this (go go forum downtime). I'll be able to give this a try tomorrow and will let you know. Thanks! --edit-- Had a bit of time so tried this tonight, same issues. The craft file I'm having issues with has a bunch of mod parts. I tried to create a craft using only stock parts that would recreate this issue but I haven't had any success. http://www.kaijin.com/hosted/Kethane_ScanOreSat_3.zip This has ScanSat, Kethane, Ore detection (from Extraplanetary Launchpads), GoodSpeed science parts, GoodSpeed radial decouplers, uses Procedural fairings and some KW parts as well. To recreate the issue, load this craft up in the VAB, click launch, use MechJeb to handle the launch, 100KM orbit, 0 inclination, launch parameters, 0.9 start turn, 60km end, 0 end angle, 0.4 shape. Let MechJeb manage staging and limit it to the bottom couple of stages. During stage separation of the radial boosters, they'll collide into stuff and blow up, there are a couple errors generated in the debug log at that point, but I could still revert if I wanted. After they get > 2.3KM away, they get "saved for orbit" and the NPE spam starts. I hope this helps in some way.
  4. Reposting this here as well. The boosters on the side use the Kerbodyne KR-2L Advanced Engine, the main stage has The Matriarch (5 meter) from NP. -edit to add- It's shortly after the boosters separate off when the issue starts.
  5. pantheis

    HotRockets! Particle FX Replacement + Tutorial

    The boosters on the side use the Kerbodyne KR-2L Advanced Engine, the main stage has The Matriarch (5 meter) from NP. -edit to add- It's shortly after the boosters separate off when the issue starts.
  6. pantheis

    HotRockets! Particle FX Replacement + Tutorial

    As I'm launching my rocket, after my initial stage separation (already moving 750m/s+ and over 12km in altitude), the debug log in-game shows the following. Note, there are no errors being spammed in the log prior to the separation and packing events. Packing Kethane/ScanOreSat 3 Debris for orbit (Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53) Kethane/ScanOreSat 3 Debris Unloaded (Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53) Packing Kethane/ScanOreSat 3 Debris for orbit (Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53) NullReferenceException at (wrapper managed-to-native) UnityEngine.Object:get_name () at SmokeScreen.SmokeScreenUI.windowGUI (Int32 ID) [0x00000] in <filename unknown>:0 at UnityEngine.GUILayout+LayoutedWindow.DoWindow (Int32 windowID) [0x00000] in <filename unknown>:0 at UnityEngine.GUI.CallWindowDelegate (UnityEngine.WindowFunction func, Int32 id, UnityEngine.GUISkin _skin, Int32 forceRect, Single width, Single height, UnityEngine.GUIStyle style) [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.Object:get_name () at SmokeScreen.SmokeScreenUI.windowGUI (Int32 ID) [0x00000] in <filename unknown>:0 at UnityEngine.GUILayout+LayoutedWindow.DoWindow (Int32 windowID) [0x00000] in <filename unknown>:0 at UnityEngine.GUI.CallWindowDelegate (UnityEngine.WindowFunction func, Int32 id, UnityEngine.GUISkin _skin, Int32 forceRect, Single width, Single height, UnityEngine.GUIStyle style) [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.GameObject:get_transform () at PersistentEmitterManager.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_particles () at ModelMultiParticlePersistFX.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_particles () at ModelMultiParticlePersistFX.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_useWorldSpace () at EffectBehaviour.OffsetParticles (Vector3 offset) [0x00000] in <filename unknown>:0 at Krakensbane.setOffset (Vector3d offset) [0x00000] in <filename unknown>:0 at Krakensbane.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.GameObject:get_transform () at PersistentEmitterManager.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_particles () at ModelMultiParticlePersistFX.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_particles () at ModelMultiParticlePersistFX.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_useWorldSpace () at EffectBehaviour.OffsetParticles (Vector3 offset) [0x00000] in <filename unknown>:0 at Krakensbane.setOffset (Vector3d offset) [0x00000] in <filename unknown>:0 at Krakensbane.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.GameObject:get_transform () at ModelMultiParticlePersistFX.Update () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.GameObject:get_transform () at ModelMultiParticlePersistFX.Update () [0x00000] in <filename unknown>:0 (Filename: Line: -1) Kethane/ScanOreSat 3 Debris Unloaded (Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53) Packing Kethane/ScanOreSat 3 Debris for orbit (Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53) Kethane/ScanOreSat 3 Debris Unloaded (Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53) Packing Kethane/ScanOreSat 3 Debris for orbit (Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53) NullReferenceException at (wrapper managed-to-native) UnityEngine.Object:get_name () at SmokeScreen.SmokeScreenUI.windowGUI (Int32 ID) [0x00000] in <filename unknown>:0 at UnityEngine.GUILayout+LayoutedWindow.DoWindow (Int32 windowID) [0x00000] in <filename unknown>:0 at UnityEngine.GUI.CallWindowDelegate (UnityEngine.WindowFunction func, Int32 id, UnityEngine.GUISkin _skin, Int32 forceRect, Single width, Single height, UnityEngine.GUIStyle style) [0x00000] in <filename unknown>:0 (Filename: Line: -1) I have no issues when Hotrockets / Smokescreen is not installed. As soon as the errors start being generated, they are literally spammed in the log file at an extremely high rate. The log file will grow in size at 100-200 KB/sec. What do you need from me to help track down this issue? I am not using any custom created configuration files for Smokescreen, just the standard Hotrockets download.
  7. Does this fix the "unable to revert" error reported in the Hotrockets! thread as well or is that one still being looked into?
  8. pantheis

    HotRockets! Particle FX Replacement + Tutorial

    I believe this is what you're looking for: NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_particles () at ModelMultiParticlePersistFX.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.GameObject:get_transform () at ModelMultiParticlePersistFX.Update () [0x00000] in <filename unknown>:0 (Filename: Line: -1) NullReferenceException at (wrapper managed-to-native) UnityEngine.ParticleEmitter:get_useWorldSpace () at EffectBehaviour.OffsetParticles (Vector3 offset) [0x00000] in <filename unknown>:0 at Krakensbane.setOffset (Vector3d offset) [0x00000] in <filename unknown>:0 at Krakensbane.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) That is spammed in my output_log.txt file, which you can download here (24.6MB) https://www.dropbox.com/s/sdx99escpt5loef/output_log.txt
  9. Can also confirm the above issue with Smokescreen 2.0 and the current Hotrockets update posted on 5/6/2014.
  10. pantheis

    HotRockets! Particle FX Replacement + Tutorial

    I can confirm the same issue. I am not using Proot's Renaissance, I am using better atmosphere, not sure that matters. And I'm still getting my error log spammed with "[Exception]: NullReferenceException" whenever I have HotRockets installed, causing me to be unable to revert a flight or go back to the space center.
  11. Reporting a bug: The Squad part "batteryBank" (Z-1k Rechargeable Battery Bank) throws an error in the log, the right-click on the part in the VAB shows the following and when you head to the launchpad any of these fall to the ground and explode, leaving gaps in your rocket. log error [EXC 21:18:11.586] InvalidOperationException: Operation is not valid due to the current state of the object image:
  12. pantheis

    HotRockets! Particle FX Replacement + Tutorial

    So it makes sense why the config worked for you and not for me. I'm using B9 SRB sepratrons, which don't have an updated config to fix whatever is causing the issue. -edit- I don't think it's the B9 stuff. I think it's the NASA LFO boosters. I don't know enough about the configs to test this theory though.
  13. Thank you!!! This is stellar!
  14. pantheis

    HotRockets! Particle FX Replacement + Tutorial

    I'm experiencing the same bug as the above, only I have no SRB's attached to my craft. The craft file that does it is using the new Squad 3.75m parts. Four of the 2.5m LFO Tank + Engine side boosters, plus a three stack of the largest 3.75m tanks and the biggest 3.75m Squad engine. It isn't happening immediately, but sometime after getting into orbit. I'll try the config file above and report back. --edit-- The above config did not resolve the issue. Watching the debug log, I started getting spammed with "[Exception]: NullReferenceException". Checking the output_log.txt file, it's spammed with the following: NullReferenceException at (wrapper managed-to-native) UnityEngine.GameObject:get_transform () at PersistentEmitterManager.FixedUpdate () [0x00000] in <filename unknown>:0 (Filename: Line: -1) This is happening right after the B9 SRBS sepratrons are firing, so technically I have SRB's on the craft I suppose.
  15. I don't care if it looks like a kethane grid or not. Personally I find the kethane overlay on the map view hard to use, except when targeting a landing with mechjeb.