Jump to content

Claytsuk

Members
  • Posts

    38
  • Joined

  • Last visited

Posts posted by Claytsuk

  1. 44 minutes ago, EventHorizion said:

    Currently I am on cursor, but I have tried the other two with the same issue. I can use my liquid engines below 75,000 meters and time acceleration with no issue, I can repeatedly turn on and off my engines, I can stop them, throttle them up or down with no problems, the moment I go higher then 75,000 meters and use time acceleration I am screwed. If I turn off my engines they will not restart, or if I haven't even gotten to that stage yet, when I do and try to activate my engines they will not work. So my problem (which does not seem to have an easy fix) is that I am unable to successful utilize time acceleration above 75,000 meters. :(

    Are you sure you’ve not just run out of battery power?  That will also result in loss of control like this.  Usually after time warping so you don’t notice the power is gone.

  2. Just to add to this conversation.  It’s not my job after paying £30 for this game to have to spend hours reproducing, analysing and writing up detailed bug reports. I buy the game to spend my time playing it not working around functional bugs that really should and easily could have been found by any professional tester employed to create a test plan and write and execute test cases.

    There are multiple stages these bugs should have been found, just taking the save issue alone; any decent functional, system and integration testing would have found this.  Failing that any kind of UAT (User Acceptance Testing) would have found this.  

    If it was just the odd minor bug, then Yes I would probably inform the Devs but this is a broken game with multiple game breaking bugs and missing fundamental features (physics warp is one example). Its a disgrace the game got released in this state and that people are still spending their money on it.

     I just called Microsoft support and  got my money back. I’ll stick to playing the PC version.

  3. This console version of KSP is totally broken for me.  Saving the game is a complete lottery.  Sometimes it works sometimes not, you have to save often because there's a big chance that you do a load of work and then lose it all.  You can't save, you can't go back to the space centre or do anything.

    That and the lack of a phyics warp (no one can tell me where it is anyway) - you can warp time but not when you are accelerating. 

     

     

  4. I think I may have overdone it a little in a fairly early career mode (not unlocked RCS yet) trip to the Mun. Here's the story, what could I do differently to make this easier? Particualry to understand how much DV I need to get there an back again.

    Built two ships to go to the Mun apollo style, a lander and tug both with docking ports. Docked in orbit all fine. Some of the tanks were emptied to get me to orbit so sent up a refuller, docked that, transferred fuel, all good. Went to the Mun and got into orbit then send my lander down. First Kerbal on the Mun, great acheivement felt amazing. A little concerned that my tug didnt have much fuel left but was going to use what was left in the loadner to transfer back to the tug after re-docking in orbit to get us home.

    Lander Lift off from the Mun went well (~loads of science on board) but no where near enough fuel to re-dock, stuck in a similar orbit. So the situation is tug stuck in mun orbit with a tiny amount of fuel, lander stucking in mun orbit with no fuel, no RCS and 3 kerbals in total stranded. SIGH...

    Rescue mission - sent an automated refueller to the mun. Docked with lander and then tug and refuelled and brought them all back home safely.

    Now don't get me wrong I'm pleased with the achievement, I'm now an expert at docking my Kerbals are all safe and I got loads of science. But there must be an easier way right?! Probably with one stage to land and come back, probably a lot lighter and uses less fuel. How can I tell if I have aneough DV to make back from somewhere?

  5. Like everyone else I'm trying to relearn how to get into orbit while going through the early career mode. I've read all the posts on the new gravity turns and watched a few videos (thanks Manley) and here's where I've got to. I've created some simple early sub orbital rockets to take the tourists up and can pretty much nail a sub orbital flight taking 2-3 of the hardcore kerbals up with Val, easy right. Gravity turn works well, no flipping, up to around 80-90k gets a bit hot coming down and a little unstable but nothing major an early parachute wont sort out. So I think I'm ready to go to orbit, upgrade the pad and hanger to use more parts.

    From there I build a much more powerful rocket (2 to 3 stages depending on the particular test) but basically the same rough design as my sub orbital Kerbal Galactic using the same new gravity turn, drop the solids off. Flips every time. Every time. I can just about cartwheel it into orbit with a little flip control but its anything but controlled. Then I went to bed.

    So now I'm thinking perhaps I'm going about this wrong. I think my first stage may be too powerful and is getting up too much speed so when i drop the solid rockets it causes a flip. So perhaps i try limiting the thrust of the solid rockets on the pad? It could be this along with being too top heavy with the full fuel tanks on top. But I need those tanks and engines in the 2nd and maybe 3rd stages to get to orbit and certainly if I'm going to go to the Mun. So i can't skimp on them.

    But overall I'm loving it. Great fun and a real challenge. Frustrating yes, but fun...

    More generally I've experienced a few bugs and crashes with 1.0 but all in all not bad. I like the new features and contracts but understand the furstation with some of the new air effects and deadly reentry withg parachutes being a little off balance for preventing flipping on reentry. I don't use steam so hopefully future updates will allow me to retain my career mode, was kind of expcting some kind of installer to upgrade for me rather than just launches an exe.

  6. My expertly planned mission to Jool with a manned landing on Laythe has not gone well… I’m playing stock 0.23.

    Have already been to the Mun, Minmus and Duna (and back ) multiple times so I do get this docking, intercept, landing etc.

    Plan

    - Launch a refuelling station in advance of the manned mission to Jool and get into Orbit

    - Launch a manned Jool engine module to refuel in Kerbin Orbit – 2 nuclear engines.

    - Launch a manned Laythe lander to doc with the engine module for the trip to Jool

    - Aerobrake into Jool orbit and into a stable orbit

    - Drop a probe into Jool atmosphere and beam back science and leave a sat in orbit.

    - Refuel the engine mod in Jool Orbit and then transfer to Lathye

    - Land on Lathye, redock in Laythe orbit and then ditch everything but the engine and capsules for the trip back to Kerbin.

    - Get loads of Science. Boom…

    Here’s what actually happened, lots of lessons learned here…

    - I actually got everything into Jool orbit fine, journey was uneventful and aerobraking worked well for both the refuel station and lander into about a circular 250k orbit. That was the first mistake, way too close to Jool and would take far too much fuel to push out to Laythe’s orbit.

    - Also found that in my low circular Jool orbit the inclination of the fuel station and landing module was very different. Would again take a lot of fuel to match up orbits and dock negating the point for refuelling in the first place.

    - So I still dropped the probes and sats and got some science but predicted I would not have enough fuel to get to Laythe and then back home.

    - So I got impatient and went straight home and burned to Kerbin using all the lander fuel but missed my intercept and my 3 Kerbals are now destined to orbit the sun for ever.

    What I would do next time

    - When getting into Jool orbit don’t circularise too low. Aerobrake so the orbits intersect Lathye’s orbit and wait for a Laythe intercept. Would save a lot of delta V.

    - Is it possible to aim for a equatorial orbit (or other planned orbit) with consistency? How? I need to do this…

    - I might not bother with the refuel station but try to take enough fuel in the engine module to get there and back again.

    - Stronger/more docking ports so I could time accelerate in a burn with less wobble.

    - Slightly redesigned ships.

    Questions

    - Was I right to aerobrake at Jool and then go to Laythe, should I try to just go direct to Laythe?

    - Is it possible to aim for a equatorial orbit with consistency? How? I need to do this… I can to a mid-course burn to hit the right height in the atmosphere fine but not it seems get my inclination matching up.

    Sigh, feel despondent…

  7. Really enjoying having a play around with career mode and getting science. Have got loads of science from the various biomes on kerbin via shirt hops into a low orbit to research the goo. Done enough to get batteries and basic solar panels.

    My next task was to put a satellite in low kerbin orbit less than 200k and the high kerbin orbit, not bring them home but to transmit science back. Firstly once you've spammed the science in irbat via a sat to effectively zero is there any point leaving the sat in orbit? It's still got power but is no use as far as I can see.

    Secondly i spam the science to zero via the science module but then take another module up and try to bring the science back to kerbin is that a valid strategy? I'm concerned the next returnable sat won't be able to collect more science under 200k to bring back because my first sat has researched but lost 80% of the science transmitting it back??

    Thanks

    Paul

  8. Is it possible to achieve an escape velocity from Kerbin (I think that's right (the sun)) and simulate a Voyager type scenario. Where the probe eventually will pass into interstellar space?

    Would Solar Panels stop working at some point?

    ??

  9. My laptop does not do a great job at KSP, it gets very laggy. Have docked a few 200 part crafts together and don't get my FPS.. Is there a general rule to keep struts down and therefore parts down to a minimum???

    Also does having 1000 part stations around lag other parts of the game? Eg space station around kerbin lag a mission around Duna?

    Thanks...

  10. Has anyone done any research into parachute deployment at speed? I ask because I'm trying to get to duna and back and do not want to waste fuel slowing down too much if my chutes are going to slow me down enough ant the end... M along with a little burn to touch down.

    I'm guessing I will have to slow down enough to be around 200 m/s ??? And then let the chutes do the rest? Will they rip off? THanks for the help...

  11. Thanks for the replies guys. This story does not end too well.

    I managed to burn my engines and enter Duna orbit but used a lot of fuel... I managed to land on Duna and lift back off again using my lander craft but didn't have enough fuel to dock in ordbit with my mother ship, which also now does not have enough fuel to get back to Kerbin.... Sign :o) was a fun 4 hours trying though...

    Think i need to figure out a way to get more fuel more efficiently to Duna so i can land and get back safely... Also need a rescue mission now for my 6 guys in Duna orbit :) should be easier since i dont need to land.

    will start out by dumping some weight before lift off will dump 2 of the nuc engines i think which wil save fuel, also will add a few more tanks...

    Can you lift off from duna with nuc engines? I don't think they would have slowed me down fast enough to land though, i used a lot more fuel than i had planned slowing down for landing so i could deploy my parachutes...

  12. On my way to duna with 6 kerbals of which 3 will attempt a landing. The rest will stay in orbit for science stuff and then I plan to get them all back home. I have 4 nuc engines on my mother ship and am currently doing a 20 min burn real time to get into duna orbit. My question is .... Is it better to burn 2 nuc engines for 20 mins or all 4 engines for 10 mins to get the best fuel efficiency or does it make no difference what so ever...

    13 mins left....

×
×
  • Create New...