sirkut

1.1.2 Magic Smoke Industries Infernal Robotics 2.0.2

Recommended Posts

On 6/13/2017 at 9:36 AM, V8jester said:

IR for 1.3 / KJR issues

List of IR download files to work with KSP 1.3

 

Remove "Active struts" as well as "strut" Folders" they are currently incompatible with KSP 1.3 - Unless you opt to use the unofficial Recompiled .dll linked below

 

Steps to install Infernal Robotics

1) Install Core Download which is the plugin and "core Files" of IR  (No parts are in this download)

2) Install Parts Pack (Legacy is the original parts, and Rework are the new white parts. You can have both installed if you wish)

3) Remove folders "IRActiveStruts" and "Struts" as they are currently incompatible

4) Optional -  If you wish to use the Surface sampler - Install the Surfacesampler.dll linked below into GameData/MagicSmokeIndustries/Parts/Rework_Utility/Plugins

5) Optional  - KJR unofficial recompile will work with KSP 1.3 and IR 2.0.12 - Linked below

6) Optional - KAS Magnet / Grasper Breaking? Increase "breakForce" under the KAS module in the part cfg to "= 999"

7) Optional - Unofficial recompile of Active Struts Plugin linked below. Curtesy of Whale_2

 

Core Download

Infernal Robotics (Ziw) 2.0.12

https://github.com/MagicSmokeIndustries/InfernalRobotics/releases

 

Parts / Plugin

Legacy Parts (Ziw)

https://github.com/MagicSmokeIndustries/InfernalRobotics/releases/download/2.0.0/IR-LegacyParts.zip

IR Rework Parts (Zodiusinfuser) - See Active Struts notes above

https://mega.nz/#!rdlHkLAJ!ZizDvd8s7zCIG529FtO8b7wM0avJ8yC3pldIaf6BGFw 

Surface Sampler dll (DMagic) - Place into "MagicSmokeIndustries/Parts/Rework_Utility/Plugins"

https://github.com/MagicSmokeIndustries/IR-Surface-Sampler/tree/master/GameData/MagicSmokeIndustries/Parts/Rework_Utility/Plugins

Active Struts Plugin Unofficial Recompile (Whale_2)

https://github.com/whale2/Active-Struts/releases/tag/1.1.0-1

I just tried to download these file but Windows Defender marked the IRSurfaceSampler.dll as - Trojan:Win32/Spursint.F!c

Edited by badfrogg

Share this post


Link to post
Share on other sites
1 hour ago, badfrogg said:

I just tried to download these file but Windows Defender marked the IRSurfaceSampler.dll as - Trojan:Win32/Spursint.F!c

That's because it is a .dll file. Most antivirus programs don't like it when you download a .dll. They typically flag them as a virus. I can tell you I am using the file from this download with no issues.

Share this post


Link to post
Share on other sites
On 13.6.2017 at 3:36 PM, V8jester said:

Kerbal Joint Reinforcement

Official GitHub Repository (Ferram4) - https://github.com/ferram4/Kerbal-Joint-Reinforcement/releases

Unofficial Recompile For 1.3 (siimav) - https://drive.google.com/file/d/0BxowaRaYHkjddHc2T28zWEdLcjQ/view

 

Please feel free to repost / update this list every so often to help a lot of the new comers

Edited July 13 by V8jester

Because of this

and this

I guess it's all working now?

Share this post


Link to post
Share on other sites

How do get things to mirror movement without placing them separately? For instance, I have a plane with rotating engine nozzles a la Harrier. The nozzles I placed in pairs, but when selecting next or previous preset, both sides move in different directions instead of the same direction.

Share this post


Link to post
Share on other sites
7 minutes ago, Cdodders said:

How do get things to mirror movement without placing them separately? For instance, I have a plane with rotating engine nozzles a la Harrier. The nozzles I placed in pairs, but when selecting next or previous preset, both sides move in different directions instead of the same direction.

You have option on each moving IR part to invert direction. Sorry, don't recall from top of my head exact name on part right click menu in SPH/VAB.

Share this post


Link to post
Share on other sites

Is there a list some where of all the parts in IR? I only seem to have a few rework parts and Legacy ones.

 

Edited by Kerbal Gamer

Share this post


Link to post
Share on other sites
2 hours ago, Kerbal Gamer said:

Is there a list some where of all the parts in IR? I only seem to have a few rework parts and Legacy ones.

 

2 posts above yours....

this is everything that is known to be compatible currently.

there are also a couple of niche parts in SM Marine as well.

Welcome to the forum by the way.

Edited by V8jester

Share this post


Link to post
Share on other sites
15 minutes ago, Trekkie148 said:

1.3 please???

One post above yours dude......

Share this post


Link to post
Share on other sites

I only have these reworked parts: grabber, grasper, landing foot, robotics control unit, the roboathlete trusses, Grappler, struts, and robostrut target. I looked at the Magic smoke files and there it shows the other parts but in game  I only see the those parts I listed. Help?

Share this post


Link to post
Share on other sites

Is there any chance of this being bundled into an actual single, working, release for 1.3.x?  what is stopping this from happening? This is pretty fragmented and hackish as it is.  Then again, that's the Kerbal way :wink:

 

Edited by Murdabenne

Share this post


Link to post
Share on other sites
8 hours ago, Murdabenne said:

Is there any chance of this being bundled into an actual single, working, release for 1.3.x?  what is stopping this from happening? This is pretty fragmented and hackish as it is.  Then again, that's the Kerbal way :wink:

 

The team of guys that built IR. Has become a bit thin. @Ziw and @ZodiusInfuser are really the two core guys that have stuck around. But even they have been scaling back over time. The only thing that usually breaks with an update is the plugin of a mod. Parts are typically unaffected (not completely the case with IR, an example would be RKE)

The closest we are all currently is my compiled list of downloads. But IR has honestly been a conglomerate of downlods for quite some time now.

16 hours ago, Kerbal Gamer said:

I only have these reworked parts: grabber, grasper, landing foot, robotics control unit, the roboathlete trusses, Grappler, struts, and robostrut target. I looked at the Magic smoke files and there it shows the other parts but in game  I only see the those parts I listed. Help?

Did you fallow all my instructions 3 posts above yours? - what version of MM do you have?

Share this post


Link to post
Share on other sites

Getting parts but no interface and have tried all the steps above. Not crashing because I've removed the active struts folder and struts folders as instructed, what am I missing? I get no interface for infernal robotics when either right clicking the parts or on the toolbars.

Edited by Maelstrom Vortex

Share this post


Link to post
Share on other sites
On 7/9/2017 at 11:07 PM, jrf said:

I have a slight problem. I have KSP 1.3 and I can place all of the parts from this mod but their is no tab for it in the parts menu and the tool bar icon is missing so I can't use any of the functions of this mod. All I can do is place the parts.

I can actually confirm this issue with current linked downloads.

Update:

Could someone with 1.3 working with IR simply upload a zip of their functional directory for us to use? Be much appreciated since the provided links for assembly appear to be incomplete or perhaps dlls are out of place? Not sure, just know there is 0 gui functionality.

Update: I appear to have it working, I'll upload later after I confirm in good condition.

Edited by Maelstrom Vortex

Share this post


Link to post
Share on other sites
23 hours ago, Kerbal Gamer said:

I had taken out active struts otherwise it would crash so instructions yes, but what is MM?

This is MM (Module Manager) You need this for almost every mod in KSP

 

9 hours ago, Maelstrom Vortex said:

I can actually confirm this issue with current linked downloads.

Update:

Could someone with 1.3 working with IR simply upload a zip of their functional directory for us to use? Be much appreciated since the provided links for assembly appear to be incomplete or perhaps dlls are out of place? Not sure, just know there is 0 gui functionality.

Update: I appear to have it working, I'll upload later after I confirm in good condition.

Trust me, If you fallowed "all" my instructions. all the links are current as well as functional in 1.3

 

 

IR for 1.3 / KJR issues

List of IR download files to work with KSP 1.3

 

Remove "Active struts" as well as "strut" Folders" they are currently incompatible with KSP 1.3 - Unless you opt to use the unofficial Recompiled .dll linked below

 

Steps to install Infernal Robotics

1) Install Core Download which is the plugin and "core Files" of IR  (No parts are in this download)

2) Install Parts Pack (Legacy is the original parts, and Rework are the new white parts. You can have both installed if you wish)

3) Remove folders "IRActiveStruts" and "Struts" as they are currently incompatible

4) Optional -  If you wish to use the Surface sampler - Install the Surfacesampler.dll linked below into GameData/MagicSmokeIndustries/Parts/Rework_Utility/Plugins

5) Optional  - KJR unofficial recompile will work with KSP 1.3 and IR 2.0.12 - Linked below

6) Optional - KAS Magnet / Grasper Breaking? Increase "breakForce" under the KAS module in the part cfg to "= 999"

7) Optional - Unofficial recompile of Active Struts Plugin linked below. Curtesy of Whale_2

 

Core Download

Infernal Robotics (Ziw) 2.0.12

https://github.com/MagicSmokeIndustries/InfernalRobotics/releases

 

Parts / Plugin

Legacy Parts (Ziw)

https://github.com/MagicSmokeIndustries/InfernalRobotics/releases/download/2.0.0/IR-LegacyParts.zip

IR Rework Parts (Zodiusinfuser) - See Active Struts notes above

https://mega.nz/#!rdlHkLAJ!ZizDvd8s7zCIG529FtO8b7wM0avJ8yC3pldIaf6BGFw 

Surface Sampler dll (DMagic) - Place into "MagicSmokeIndustries/Parts/Rework_Utility/Plugins"

https://github.com/MagicSmokeIndustries/IR-Surface-Sampler/tree/master/GameData/MagicSmokeIndustries/Parts/Rework_Utility/Plugins

Active Struts Plugin Unofficial Recompile (Whale_2)

https://github.com/whale2/Active-Struts/releases/tag/1.1.0-1

 

Utility

Thread Link For IR Sequencer (Ziw) 

Kerbal Joint Reinforcement

Official GitHub Repository (Ferram4) - https://github.com/ferram4/Kerbal-Joint-Reinforcement/releases

Unofficial Recompile For 1.3 (siimav) - https://drive.google.com/file/d/0BxowaRaYHkjddHc2T28zWEdLcjQ/view

 

Please feel free to repost / update this list every so often to help a lot of the new comers

Share this post


Link to post
Share on other sites
1 hour ago, V8jester said:

This is MM (Module Manager) You need this for almost every mod in KSP

 

Trust me, If you fallowed "all" my instructions. all the links are current as well as functional in 1.3

 

 

IR for 1.3 / KJR issues

List of IR download files to work with KSP 1.3

 

Remove "Active struts" as well as "strut" Folders" they are currently incompatible with KSP 1.3 - Unless you opt to use the unofficial Recompiled .dll linked below

 

Steps to install Infernal Robotics

1) Install Core Download which is the plugin and "core Files" of IR  (No parts are in this download)

2) Install Parts Pack (Legacy is the original parts, and Rework are the new white parts. You can have both installed if you wish)

3) Remove folders "IRActiveStruts" and "Struts" as they are currently incompatible

4) Optional -  If you wish to use the Surface sampler - Install the Surfacesampler.dll linked below into GameData/MagicSmokeIndustries/Parts/Rework_Utility/Plugins

5) Optional  - KJR unofficial recompile will work with KSP 1.3 and IR 2.0.12 - Linked below

6) Optional - KAS Magnet / Grasper Breaking? Increase "breakForce" under the KAS module in the part cfg to "= 999"

7) Optional - Unofficial recompile of Active Struts Plugin linked below. Curtesy of Whale_2

 

Core Download

Infernal Robotics (Ziw) 2.0.12

https://github.com/MagicSmokeIndustries/InfernalRobotics/releases

 

Parts / Plugin

Legacy Parts (Ziw)

https://github.com/MagicSmokeIndustries/InfernalRobotics/releases/download/2.0.0/IR-LegacyParts.zip

IR Rework Parts (Zodiusinfuser) - See Active Struts notes above

https://mega.nz/#!rdlHkLAJ!ZizDvd8s7zCIG529FtO8b7wM0avJ8yC3pldIaf6BGFw 

Surface Sampler dll (DMagic) - Place into "MagicSmokeIndustries/Parts/Rework_Utility/Plugins"

https://github.com/MagicSmokeIndustries/IR-Surface-Sampler/tree/master/GameData/MagicSmokeIndustries/Parts/Rework_Utility/Plugins

Active Struts Plugin Unofficial Recompile (Whale_2)

https://github.com/whale2/Active-Struts/releases/tag/1.1.0-1

 

Utility

Thread Link For IR Sequencer (Ziw) 

Kerbal Joint Reinforcement

Official GitHub Repository (Ferram4) - https://github.com/ferram4/Kerbal-Joint-Reinforcement/releases

Unofficial Recompile For 1.3 (siimav) - https://drive.google.com/file/d/0BxowaRaYHkjddHc2T28zWEdLcjQ/view

 

Please feel free to repost / update this list every so often to help a lot of the new comers

Ok I think I need to update MM. Is Struts the folder in Legacy parts? Also, is KJR a requirement for IR?

Edited by Kerbal Gamer

Share this post


Link to post
Share on other sites
34 minutes ago, Kerbal Gamer said:

Ok I think I need to update MM. Is Struts the folder in Legacy parts? Also, is KJR a requirement for IR?

If you do not wish to use Active Struts. All you need to do is delete the folder "MagicSmokeIndustries/IRActiveStruts"

If you do wish to use Active Struts. Update the plugin "ActiveStruts.dll" in "MagicSmokeIndustries/IRActiveStruts/Plugins" with the one linked in my post from Whale_2.

Also the current version of Module Manager is 2.8.1

Share this post


Link to post
Share on other sites
7 hours ago, V8jester said:

If you do not wish to use Active Struts. All you need to do is delete the folder "MagicSmokeIndustries/IRActiveStruts"

If you do wish to use Active Struts. Update the plugin "ActiveStruts.dll" in "MagicSmokeIndustries/IRActiveStruts/Plugins" with the one linked in my post from Whale_2.

Also the current version of Module Manager is 2.8.1

Ok ill try tommorrow, thanks alot for the help!

Share this post


Link to post
Share on other sites
On 7/30/2017 at 9:35 AM, V8jester said:

If you do not wish to use Active Struts. All you need to do is delete the folder "MagicSmokeIndustries/IRActiveStruts"

If you do wish to use Active Struts. Update the plugin "ActiveStruts.dll" in "MagicSmokeIndustries/IRActiveStruts/Plugins" with the one linked in my post from Whale_2.

Also the current version of Module Manager is 2.8.1

Still shows the small amount of parts i listed, but now has robotubes/trusses.

Share this post


Link to post
Share on other sites
1 hour ago, Kerbal Gamer said:

Still shows the small amount of parts i listed, but now has robotubes/trusses.

You are missing something. Please outline the steps you fallowed to install. You did fallow "all" my instructions correct? And this is indeed IR 2.0.12 on KSP 1.3.

Share this post


Link to post
Share on other sites
18 hours ago, V8jester said:

You are missing something. Please outline the steps you fallowed to install. You did fallow "all" my instructions correct? And this is indeed IR 2.0.12 on KSP 1.3.

I downloaded the Core, put in Gamedata, the rework and put it in, the took out active struts.

Share this post


Link to post
Share on other sites
39 minutes ago, Kerbal Gamer said:

I downloaded the Core, put in Gamedata, the rework and put it in, the took out active struts.

And you are looking under the robotics tab in game for all IR parts?

Share this post


Link to post
Share on other sites
1 hour ago, V8jester said:

And you are looking under the robotics tab in game for all IR parts?

I don't have a robo tab. Most of the parts are in utility and structural.

Share this post


Link to post
Share on other sites
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.