Jump to content

[1.1.3] Pulsejet Argus As 014 / As 044 and other WWII german engines


Pagan_Scorpion

Recommended Posts

14 hours ago, Pagan_Scorpion said:

Understood, this is easy to change.
Does it need to slowly decrease in efficacity, or just stop working at 2.7/2.9 ?

Maximum thrust and efficiency is at mach 1.2, but it goes down by very little, until about mach 2.5, where it would decrease in a very large curve, as the pressure gets too high for the amount it's expanding, and the flame holder starts to go out.

Link to comment
Share on other sites

  • 2 weeks later...

Here's a small update based on what we were discussing about flam out at 2.5 mach for lorin ramjets.

Just to show you the new atmosphere curve (if it needs more tweaks, it will be easier with this) : 

1452253541-machthrust.png

And here is a WIP of the next part, I'm currently making the texture !
1452253833-jumo004.png

 

Link to comment
Share on other sites

4 minutes ago, Pagan_Scorpion said:

Here's a small update based on what we were discussing about flam out at 2.5 mach for lorin ramjets.

Just to show you the new atmosphere curve (if it needs more tweaks, it will be easier with this) : 

1452253541-machthrust.png

And here is a WIP of the next part, I'm currently making the texture !
 

 

Nice!

 

I can make charts if you need them, just ask, and I will do it when I can.

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 months later...

Any chance of 1.1 support? Never knew this mod existed. Glad I found it! :D

 

 

EDIT: I tested the engines in 1.1 and they all seem to function normally. No weird bugs, pulsejets shutdown after Mach 1, and nothing seems glitchy. I haven't tried it with AJE or FAR yet but totally stock 1.1 seems to work.

Edited by Ryanja99
Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

Sorry guys for the long silence. It was not intended. My babyboy was born a bit earlier, letting me no time to continue the mod until now. I'll do my best !

To give you some more information, the Jumo is on its way, just some problem to tweak (not the trust I want nor the top speed... Maybe because of a faulty hitbox messing with aerodynamics). I also want to produce a better texture for it. It's too blank for my own taste !

On 25/01/2016 at 0:41 AM, halo fan 117 said:

would you be willing to post the craft files for the vehicles in the first post images ?

=> I'll do that, I just need to rework some of those, since Adjustable Landing Gear doesn't appear to work properly since 1.1

On 20/05/2016 at 1:06 AM, Ryanja99 said:

Any chance of 1.1 support? Never knew this mod existed. Glad I found it! :D

EDIT: I tested the engines in 1.1 and they all seem to function normally. No weird bugs, pulsejets shutdown after Mach 1, and nothing seems glitchy. I haven't tried it with AJE or FAR yet but totally stock 1.1 seems to work.

Yeah, I didn't have problem with them either.

On 10/06/2016 at 3:09 PM, He_162 said:

The pulsejet as-014 could not work past mach 0.95 the air forced the intakes open all the time.

The As-044 could stand up to mach 1.3 Im sure.

Yup for the As-014. Didn't remember if it's also the case for the 044. Need to check this !

Edited by Pagan_Scorpion
More information
Link to comment
Share on other sites

7 hours ago, Pagan_Scorpion said:

Sorry guys for the long silence. It was not intended. My babyboy was born a bit earlier, letting me no time to continue the mod until now. I'll do my best !

To give you some more information, the Jumo is on its way, just some problem to tweak (not the trust I want nor the top speed... Maybe because of a faulty hitbox messing with aerodynamics). I also want to produce a better texture for it. It's too blank for my own taste !

=> I'll do that, I just need to rework some of those, since Adjustable Landing Gear doesn't appear to work properly since 1.1

Yeah, I didn't have problem with them either.

Yup for the As-014. Didn't remember if it's also the case for the 044. Need to check this !

The As-044 had a little equipment piece on the front that sucked in more air, and also slowed it down, so that the air could compress more into the combustion chamber in between bursts, and it helped force open the valves when they were forced shut by the pulse of the jet. :D

Link to comment
Share on other sites

any chance we could get some sneaky new pics :wink:

 

edit

also, if youre still working on the mod, could i suggest some engines?

1. BMW 028, turboprop version of BMW 018

2. DB 021, turboprop HeS-011

3. Jumo 022, turboprop Jumo 012

4. DB 007, turbofan

 

Edited by halowraith1
Link to comment
Share on other sites

  • 2 months later...
  • 2 months later...
On 11/28/2016 at 1:02 PM, Pagan_Scorpion said:

I have currently less time to work on this mod, nonetheless I still work on it when I can !
I've some problems with the jumo, they're not working as intended !
And afaik the mod is compatible with latest ksp version ! If any bug, please let me know :)

Thanks for that confirmation Pagan! Much appreciated, and all your hard work. I would love to see a upcoming update, and reach out to me if you want texture help for revigoration. I have a history of fiddling with game engines.

Link to comment
Share on other sites

  • 2 months later...
  • 1 year later...
  • 3 years later...

small necro...

 

Great mod, looks nice! I will se if I can get these working in RSS/RO/RP1

 

I found this info:

I am trying to add the PSSI mod from:

https://forum.kerbalspaceprogram.com/index.php?/topic/124078-113-pulsejet-argus-as-014-as-044-and-other-wwii-german-engines/

Featuring is late 40's/early 50's pulse jets like that on the Fieseler Fi 103, AKA the V1 Buzz Bomb. Ford/Chelomey produced their own versions, as the 10Kh & JB-2 cruise missiles, and stock existed into the mid 1950s. SFC 0.513 lb/lbf-hr static. Thrust limited at mach 0.75, Temperature limit Mach 1.0.

source: https://en.wikipedia.org/wiki/Argus_As_014, A single Argus As 109-044 pulse jet engine that developed 500 kg (1102 lbs)or 4.902kN: http://www.luft46.com/junkers/juef126.html// Type: pulse jet Length: 3,350 mm (132 in) Diameter: 813 mm (32.0079 in) Dry weight: 170 kg (375 lb) Thrust: 4.902kN (1102 lbf)"

I have found the parts browser, the cfg's and the various RO/RP1 files I believe I need.

Would someone be able to proof read my cfg and point out the errors, as I am not very experienced at this.

so far:

@PART[as014]:FOR[RealismOverhaul|RP-0]
{
    %RSSROConfig = True
    %RP0Conf = True
    @name = as014 Pulsejet
    @TechRequired = unlockParts
    @entryCost = 0
    @cost = 9
    @title = Pulsejet Argus As 014
    @manufacturer = Argus
    @description = Original design by Argus for use the Fieseler Fi 103, AKA the V1 Buzz Bomb. From captured stock into the 1950s. SFC 0.513 lb/lbf-hr static. Thrust limited at Mach 0.75 Temperature limit of Mach 0.9.
    @mass = 0.17
    @crashTolerance = 7
    @maxTemp = 500 // Mach 1.0
    
    @MODULE[ModuleEngines*]
    {
        @name = ModuleEnginesAJEJet
        %maxThrust = 3.53
        %Area = 0.094
        %BPR = 0
        %CPR = 1.35 // 1.1 effective
        %FPR = 0
        %TPR = 1
        %Mdes = 0.5
        %Tdes = 250
        %eta_c = 0.95
        %eta_t = 0.95
        %eta_n = 0.8
        %FHV = 22500000
        %bird = 1168
        %TAB = 0
        %exhaustMixer = False
        %thrustUpperLimit = 9
        %maxT3 = 500
        %isCentrifugalFlow = False
        
        // Engine fitting params
        %dryThrust = 3.53
        %wetThrust = 0
        %drySFC = 0.513
        
        %flameoutEffectName = flameout
        %powerEffectName = running_thrust
        %engageEffectName = engage
        %disengageEffectName = disengage
        %spoolEffectName = running_turbine
        %engineSpoolIdle = 0.05
        %engineSpoolTime = 1.5
        %EngineType = Turbine // Pulsejet
        
        @PROPELLANT[LiquidFuel]
        {
            @name = Kerosene
        }
    }
    @MODULE[AJEInlet]
    {
        @Area *= 0.51
    }
}


@PART[as044]:FOR[RealismOverhaul|RP-0]
{
    %RSSROConfig = True
    %RP0Conf = True
    @name = as044 Pulsejet
    @TechRequired = supersonicDev
    @entryCost = 1000
    @cost = 17
    @title = Pulsejet Argus As 044
    @manufacturer = Argus
    @description = Originally designed by Argus for use the Fieseler Fi 103, AKA the V1 Buzz Bomb. Rather than being an Argus project, Ford/Chelomey (in a straight-through-flow development of the W.2) produced their own versions. It powered the 10Kh & JB-2 cruise missiles, and stock existed into the mid 1950s. SFC 0.513 lb/lbf-hr static. Temperature limit Mach 1.0.
    @mass = 0.17
    @crashTolerance = 7
    @maxTemp = 500 // Mach 1.0
    
    @MODULE[ModuleEngines*]
    {
        @name = ModuleEnginesAJEJet
        %maxThrust = 4.902
        %Area = 0.094
        %BPR = 0
        %CPR = 1.5 // 1.2 effective
        %FPR = 0
        %TPR = 1
        %Mdes = 0.5
        %Tdes = 250
        %eta_c = 0.95
        %eta_t = 0.95
        %eta_n = 0.8
        %FHV = 22500000
        %bird = 1168
        %TAB = 0
        %exhaustMixer = False
        %thrustUpperLimit = 11
        %maxT3 = 500
        %isCentrifugalFlow = False
        
        // Engine fitting params
        %dryThrust = 4.902
        %wetThrust = 0
        %drySFC = 0.513
        
        %flameoutEffectName = flameout
        %powerEffectName = running_thrust
        %engageEffectName = engage
        %disengageEffectName = disengage
        %spoolEffectName = running_turbine
        %engineSpoolIdle = 0.05
        %engineSpoolTime = 1.5
        %EngineType = Turbine // Pulsejet
        
        @PROPELLANT[LiquidFuel]
        {
            @name = Kerosene
        }
    }
    @MODULE[AJEInlet]
    {
        @Area *= 0.51
    }
}
@PART[as014]:FOR[RealismOverhaul|RP-0]
{
    %RSSROConfig = True
    %RP0Conf = True
}
@PART[as044]:FOR[RealismOverhaul|RP-0]
{
    %RSSROConfig = True
    %RP0Conf = True
}
@PART[as014]:FOR[RealismOverhaul|RP-0]
{
    %RSSROConfig = True
    %RP0Conf = True
}
@PART[as044]:FOR[RealismOverhaul|RP-0]
{
    %RSSROConfig = True
    %RP0Conf = True
}

 

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...