Nhawks17

[1.6.1] RealPlume - Stock [v1.3.1 - 1/14/19] - Better Late than Never Update

Recommended Posts

22 hours ago, gamerscircle said:

@StahnAileron I do have a couple of MM patches helping with my new game setup, so I know they work.  However, this patch doesn't seem to be having any impact.  Is there any particular place that this patch should be put?

Anywhere inside the GameData folder should be enough. I did make this for KSP 1.2.x, so some stuff may have changed or it isn't affecting the particular thing you're trying to do. All this patch does is replace the activation sound for engines with the original stock sound. The activation sound was the loudest sound clip used by RealPlume (back then in KSP 1.2.x anyway).

Oh, and just to be sure: You did make sure the file extension on it is CFG and not TXT, right? If you're on Windows, it defaults to not displaying the file extension. And NotePad, if you used it, appends .TXT to new files by default unless you tell it to save as ALL FILES first. You may also want to make sure it's not labeled as FILENAME.CFG.TXT as well.

I apologize if you are already aware of the above, but I know Windows has many idiosyncrasies most users aren't aware of until they have trouble and ask someone for help.

Share this post


Link to post
Share on other sites
7 hours ago, StahnAileron said:

Anywhere inside the GameData folder should be enough. I did make this for KSP 1.2.x, so some stuff may have changed or it isn't affecting the particular thing you're trying to do. All this patch does is replace the activation sound for engines with the original stock sound. The activation sound was the loudest sound clip used by RealPlume (back then in KSP 1.2.x anyway).

Oh, and just to be sure: You did make sure the file extension on it is CFG and not TXT, right? If you're on Windows, it defaults to not displaying the file extension. And NotePad, if you used it, appends .TXT to new files by default unless you tell it to save as ALL FILES first. You may also want to make sure it's not labeled as FILENAME.CFG.TXT as well.

I apologize if you are already aware of the above, but I know Windows has many idiosyncrasies most users aren't aware of until they have trouble and ask someone for help.

Oh.. no apology needed, I have been playing and modding KSP for a few years, but just recently started to look at the patches and attempted to mold my game a little differently.

I have patches that are intended for my game in their own folder, vs just dropping them into GameData folder, would the root of the GameData be better?  I am using Notepad++

So, you think perhaps since things have changed since 1.2.x , that some of the sounds might not be impacted?

Share this post


Link to post
Share on other sites
On ‎11‎/‎18‎/‎2018 at 11:11 PM, gamerscircle said:

Oh.. no apology needed, I have been playing and modding KSP for a few years, but just recently started to look at the patches and attempted to mold my game a little differently.

I have patches that are intended for my game in their own folder, vs just dropping them into GameData folder, would the root of the GameData be better?  I am using Notepad++

So, you think perhaps since things have changed since 1.2.x , that some of the sounds might not be impacted?

Having your own personal folder for mod patches is fine.

Well, I'd have to verify that you are in fact saving the file as a CFG and not some other file type by accident. You know what...: https://www.dropbox.com/s/qcst62p1avgmhqz/RealPlumeAudio.cfg?dl=0

Try that link and download. That's the actual file I'm using and as far as I can tell, it works... I think. Honestly, I've been working with jets lately (usually), so I haven't actually been paying much attention to rocket engines and the sounds they make.

Lastly, if you could tell me just exactly what it is you want to do again in detail, maybe I'll be help you a bit more (or realize what I have been trying to do doesn't apply to your end goal...)

Share this post


Link to post
Share on other sites
On 11/21/2018 at 1:47 PM, StahnAileron said:

Having your own personal folder for mod patches is fine.

Well, I'd have to verify that you are in fact saving the file as a CFG and not some other file type by accident. You know what...: https://www.dropbox.com/s/qcst62p1avgmhqz/RealPlumeAudio.cfg?dl=0

Try that link and download. That's the actual file I'm using and as far as I can tell, it works... I think. Honestly, I've been working with jets lately (usually), so I haven't actually been paying much attention to rocket engines and the sounds they make.

Lastly, if you could tell me just exactly what it is you want to do again in detail, maybe I'll be help you a bit more (or realize what I have been trying to do doesn't apply to your end goal...)

Thank you.. I appreciate it.   I am running KSP 1.5.1 - I am curious if this might be impacting it as this file didn't seem to have any impact either.

Share this post


Link to post
Share on other sites

So...... just wondering if the latest update works with 1.4.5?

Share this post


Link to post
Share on other sites
11 hours ago, gamerscircle said:

Thank you.. I appreciate it.   I am running KSP 1.5.1 - I am curious if this might be impacting it as this file didn't seem to have any impact either.

Then you'll have to tell me exactly what you want accomplished because that patch changes only ONE sound. (Launch something with a KS-25 engine and toggle the engine on and off a few times with JUST RealPlume, my patch, and all necessary dependencies installed. The activation sound should be the quieter stock sound.)

4 hours ago, Mukita12 said:

So...... just wondering if the latest update works with 1.4.5?

This release of the mod is still technically still for KSP v1.4.x. (See title.) Minor updates to KSP have been less likely to break mods, it seems.

Share this post


Link to post
Share on other sites
11 hours ago, StahnAileron said:

This release of the mod is still technically still for KSP v1.4.x. (See title.) Minor updates to KSP have been less likely to break mods, it seems.

Owh.... thanks

Share this post


Link to post
Share on other sites
5 hours ago, HaydenTheKing said:

What is the difference between realplume stock and realplume in the zip file?

If I am not mistaken, RealPlume is a set of plume graphics/models/particles and plume definitions - resources that can be used to create new plumes for engines through MM patches. RealPlumeStock is a set of patches that apply those graphics to stock engines. Or something like that.

Share this post


Link to post
Share on other sites

The plume on the swivel for me comes out before the nozzle?

Im using Ksp 1.4.5. I’m curious if others are having a issue with that one. I don’t really  notice it on other rockets engines, possibly a little on the reliant 

Edited by HaydenTheKing

Share this post


Link to post
Share on other sites

What is the most common reason for plumes (aka. smoke puffs) going upwards instead of downwards?

I'm trying to fix the Sounding Rockets plumes.

This is what I actually got:
GameData\RealPlume-Stock\UmbraSpaceIndustries\Sounding_Rockets.cfg

//Sounding Rocket Configs by forum user Drew Kerman

// LF/O Engine
@PART[SR_Aerospike]
{
	%EFFECTS
	{
		Kerolox-Upper
		{
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.2
				fixedScale = 0.3
				name = flare
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				emission = 0.0 0
				emission = 0.01 0.2
				emission = 1.0 1
				speed = 0.0 1
				speed = 1.0 1
				offset = 0
				energy = 0.0 0.1
				energy = 1.0 0.1
				size = 0.0 0.6
				size = 1.0 0.6
				fixedEmissions = false
				randomInitalVelocityOffsetMaxRadius = 0.2
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.2
				fixedScale = 0.3
				energy = 0.5
				speed = 0.75
				emissionMult = 0.35
				name = plume
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				fixedEmissions = false
				sizeClamp = 50
				randomInitalVelocityOffsetMaxRadius = 2
				randConeEmit
				{
					density = 1.0 0
					density = 0.25 1
					density = 0.06 1.4
					density = 0 1.6
				}
				logGrow
				{
					density = 1.0 1
					density = 0.2 1
					density = 0.1 7
					density = 0.0 2
				}
				logGrowScale
				{
					density = 1.0 1
					density = 0.8 1
					density = 0.46 1.3
					density = 0.2 2
					density = 0.1 4
					density = 0.0 5
				}
				linGrow
				{
					density = 1.0 -0.2
					density = 0.25 0
					density = 0.07 4
					density = 0.035 12
					density = 0.0 25
				}
				speed
				{
					density = 1.0 5
					density = 0.46 5
					density = 0.2 5
					density = 0.1 8
					density = 0.05 8
					density = 0.01 6
					density = 0.0 4
				}
				xyForce
				{
					density = 1 0.4
					density = 0.25 0.6
					density = 0.06 0.75
					density = 0.01 0.85
					density = 0 1
				}
				zForce
				{
					density = 1 1
					density = 0.2 1.02
					density = 0 1.033
				}
				emission
				{
					density = 1.0 10
					density = 0.5 10
					density = 0.2 12
					density = 0.1 9
					density = 0.07 7
					density = 0.035 15
					density = 0.01 15
          density = 0.0  13
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 0.75
					density = 0.3 0.75
					density = 0.2 0.7
					density = 0.07 0.65
					density = 0.035 0.25
					density = 0.0 0.2
				}
				size
				{
					density = 1.0 1
					density = 0.8 0.9
					density = 0.2 0.85
					density = 0.06 0.7
					density = 0.01 0.6
					density = 0.0 0.4
				}
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.2
				fixedScale = 0.3
				emissionMult = 0.35
				name = plumeboundary
				modelName = RealPlume/Hoojiwana_FX/MPspike
				fixedEmissions = false
				sizeClamp = 50
				randomInitalVelocityOffsetMaxRadius = 5
				randConeEmit
				{
					density = 1.0 0
					density = 0.25 1
					density = 0.06 1.7
					density = 0 2
				}
				grow
				{
					density = 1.0 -0.99
					density = 0.8 0.0
					density = 0.2 0
					density = 0.1 0
					density = 0 0
				}
				xyForce
				{
					density = 1 0.05
					density = 0.25 0.1
					density = 0.06 0.45
					density = 0.01 0.75
					density = 0 1
				}
				logGrow
				{
					density = 1.0 1
					density = 0.2 2
					density = 0.1 7
					density = 0.0 10
				}
				logGrowScale
				{
					density = 1.0 1
					density = 0.8 1.5
					density = 0.46 2
					density = 0.2 3
					density = 0.1 4
					density = 0.0 6
				}
				linGrow
				{
					density = 1.0 -5
					density = 0.46 0.0
					density = 0.2 3
					density = 0.035 20
					density = 0.0 25
				}
				speed
				{
					density = 1.0 2
					density = 0.25 2.5
					density = 0.1 4
					density = 0.05 4.5
					density = 0.0 4
				}
				zForce
				{
					density = 1 1
					density = 0.2 1.02
					density = 0 1.04
				}
				emission
				{
					density = 1.0 2.0
					density = 0.8 2
					density = 0.5 3
					density = 0.2 4
					density = 0.1 4
					density = 0.05
					density = 0.01 6
					density = 0.0 7
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 2
					density = 0.3 2
					density = 0.2 1.7
					density = 0.05 1.6
					density = 0.01 1
					density = 0.0 0.4
				}
				size
				{
					density = 1.0 1
					density = 0.8 0.85
					density = 0.2 0.8
					density = 0.06 0.55
					density = 0.0 0.4
				}
			}
		}
	}

	@MODULE[ModuleEngines*]
	{
		@name = ModuleEnginesFX
		%powerEffectName = Kerolox-Upper
	}
}

// SRM-L
@PART[SR_Rocket_35_02]
{
	%EFFECTS
	{
		%Solid-Lower
		{
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				//Get the inputs from the other config.
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.05
				fixedScale	= 0.25
				name = flare
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				emission = 0.0 0
				emission = 0.01 0.2
				emission = 1.0 2
				speed = 0.0 1
				speed = 1.0 1.5
				offset = 0
				energy = 0.0 0.1
				energy = 1.0 0.1
				size = 0.0 0.6
				size = 1.0 0.6
				fixedEmissions = false
				randomInitalVelocityOffsetMaxRadius = 0.2
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				//Get the inputs from the other config.
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-.05
				fixedScale	= .2
				energy		= 0.65
				speed		 = 1.25
				name = plume
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				fixedEmissions = false
				sizeClamp = 50
				randomInitalVelocityOffsetMaxRadius = 0.2
				randConeEmit
				{
					density = 1 0.1
					density = 0 1
				}
				logGrow
				{
					density = 1.0 1
					density = 0.1 3
					density = 0.0 2
				}
				logGrowScale
				{
					density = 1.0 0.0
					density = 0.8 0.5
					density = 0.46 0.75
					density = 0.2 1
					density = 0.1 2
					density = 0.0 3
				}
				linGrow
				{
					density = 1.0 1
					density = 0.46 1
					density = 0.2 3
					density = 0.05 7
					density = 0.0 7
				}
				speed
				{
					density = 1.0 2
					density = 0.46 2.5
					density = 0.2 2.5
					density = 0.05 3
					density = 0.0 3
				}
				xyForce
				{
					density = 1 0.95
					density = 0.24 0.9
					density = 0.0 1
				}
				emission
				{
					density = 1.0 4.0
					density = 0.8 3.5
					density = 0.2 3.5
					density = 0.1 2.9
					density = 0.05 2.3
					density = 0.0 2.25
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 2
					density = 0.3 2
					density = 0.05 0.5
					density = 0.0 0.5
				}
				size
				{
					density = 1.0 0.8
					density = 0.8 0.65
					density = 0.2 0.55
				}
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,2
				fixedScale	= 0.25
				name = smoke
				modelName = RealPlume/MP_Nazari_FX/smokebooster
				speed = 0.5
				grow = 0.0 0
				grow = 1.0 0.1
				renderMode = "Billboard"
				collide = true
				physical = true
				collideRatio = 0
				stickiness = 0.5
				sizeClamp = 100
				angle = 0.0 1.0
				angle = 45.0 1.0
				angle = 50.0 1.0
				distance = 0.0 1.0
				distance = 100.0 1.0
				distance = 110.0 1.0
				logGrow
				{
					density = 1.0 20
					density = 0.1 25
					density = 0.0 2
				}
				logGrowScale
				{
					density = 1.0 2
					density = 0.8 2.5
					density = 0.46 3
					density = 0.2 3
					density = 0.1 3
					density = 0.0 5
				}
				linGrow
				{
					density = 1.0 0
					density = 0.46 0
					density = 0.2 0
					density = 0.05 5
					density = 0.0 10
				}
				emission
				{
					density = 1.0 5.0
					density = 0.05 4
					density = 0.0 0
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 3
					density = 0.3 3
					density = 0.05 0.1
					density = 0.0 0.0
				}
				size
				{
					density = 1.0 1
					density = 0.8 1.2
					density = 0.6 2
					density = 0.2 3
					density = 0.0 7
				}
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.5
				fixedScale	= 0.1
				name = slag
				modelName = Squad/FX/SRB_Large
				emission = 0.0 0
				emission = 0.01 0.05
				emission = 1.0 0.2
				speed = 0.0 1
				speed = 1.0 1
				offset = 1
				size = 0.0 0.2
				size = 1.0 0.2
				fixedEmissions = false
				randomInitalVelocityOffsetMaxRadius = 0.2
				randConeEmit
				{
					density = 1 0.4
					density = 0.5 0.8
					density = 0.1 1
					density = 0 1
				}
				xyForce
				{
					density = 1 0.9
					density = 0.35 0.93
					density = 0.0 1
				}
				energy
				{
					density = 1.0 6
					density = 0.3 5
					density = 0.05 2
					density = 0.0 1.5
				}
			}
		}
	}

	@MODULE[ModuleEngines*]
	{
		@name = ModuleEnginesFX
		%powerEffectName = Solid-Lower
	}
}

// SRM-S
@PART[SR_Rocket_35_01]
{
	%EFFECTS
	{
		%Solid-Upper
		{
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.05
				fixedScale	= 0.23
				name = flare
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				emission = 0.0 0
				emission = 0.01 0.2
				emission = 1.0 2
				speed = 0.0 1
				speed = 1.0 1
				offset = 0
				energy = 0.0 0.1
				energy = 1.0 0.1
				size = 0.0 0.6
				size = 1.0 0.6
				fixedEmissions = false
				randomInitalVelocityOffsetMaxRadius = 0.2
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,0
				fixedScale	= 0.2
				energy		= 0.35
				speed		 = 1.25
				name = plume
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				fixedEmissions = false
				sizeClamp = 50
				randomInitalVelocityOffsetMaxRadius = 0.2
				randConeEmit
				{
					density = 1 0.4
					density = 0 1
				}
				logGrow
				{
					density = 1.0 2
					density = 0.1 3
					density = 0.0 2
				}
				logGrowScale
				{
					density = 1.0 0.0
					density = 0.8 1.5
					density = 0.46 2
					density = 0.2 2
					density = 0.1 2
					density = 0.0 5
				}
				linGrow
				{
					density = 1.0 1
					density = 0.46 1
					density = 0.2 3
					density = 0.05 7
					density = 0.0 7
				}
				speed
				{
					density = 1.0 2
					density = 0.46 2.5
					density = 0.2 2.5
					density = 0.05 3
					density = 0.0 3
				}
				xyForce
				{
					density = 1 0.95
					density = 0.24 0.9
					density = 0.0 1
				}
				emission
				{
					density = 1.0 4.0
					density = 0.8 3.5
					density = 0.2 3.5
					density = 0.1 2.9
					density = 0.05 2.3
					density = 0.0 2.25
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 2
					density = 0.3 2
					density = 0.05 0.5
					density = 0.0 0.5
				}
				size
				{
					density = 1.0 0.8
					density = 0.8 0.65
					density = 0.2 0.55
				}
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,0.5
				fixedScale	= 0.13
				name = smoke
				modelName = RealPlume/MP_Nazari_FX/smokebooster
				speed = 0.25
				grow = 0.0 0
				grow = 1.0 0.1
				renderMode = "Billboard"
				collide = true
				physical = true
				collideRatio = 0
				stickiness = 0.5
				sizeClamp = 100
				angle = 0.0 1.0
				angle = 45.0 1.0
				angle = 50.0 1.0
				distance = 0.0 1.0
				distance = 100.0 1.0
				distance = 110.0 1.0
				logGrow
				{
					density = 1.0 10
					density = 0.1 15
					density = 0.0 2
				}
				logGrowScale
				{
					density = 1.0 2
					density = 0.8 2.5
					density = 0.46 3
					density = 0.2 3
					density = 0.1 3
					density = 0.0 5
				}
				linGrow
				{
					density = 1.0 0
					density = 0.46 0
					density = 0.2 0
					density = 0.05 5
					density = 0.0 10
				}
				emission
				{
					density = 1.0 5.0
					density = 0.05 4
					density = 0.0 0
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 3
					density = 0.3 3
					density = 0.05 0.1
					density = 0.0 0.0
				}
				size
				{
					density = 1.0 1
					density = 0.8 1.2
					density = 0.6 2
					density = 0.2 3
					density = 0.0 7
				}
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				//Get the inputs from the other config.
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.1
				fixedScale	= 0.1
				name = slag
				modelName = Squad/FX/SRB_Large
				emission = 0.0 0
				emission = 0.01 0.05
				emission = 1.0 0.2
				speed = 0.0 1
				speed = 1.0 1
				offset = 1
				size = 0.0 0.2
				size = 1.0 0.2
				fixedEmissions = false
				randomInitalVelocityOffsetMaxRadius = 0.2
				randConeEmit
				{
					density = 1 0.4
					density = 0.5 0.8
					density = 0.1 1
					density = 0 1
				}
				xyForce
				{
					density = 1 0.9
					density = 0.35 0.93
					density = 0.0 1
				}
				energy
				{
					density = 1.0 6
					density = 0.3 5
					density = 0.05 2
					density = 0.0 1.5
				}
			}
		}
	}

	@MODULE[ModuleEngines*]
	{
		@name = ModuleEnginesFX
		%powerEffectName = Solid-Upper
	}
}

// SRM-XL
@PART[SR_Rocket_625_01]
{
	%EFFECTS
	{
		%Solid-Lower
		{
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				//Get the inputs from the other config.
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.2
				fixedScale	= 0.4
				name = flare
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				emission = 0.0 0
				emission = 0.01 0.2
				emission = 1.0 2
				speed = 0.0 1
				speed = 1.0 1.5
				offset = 0
				energy = 0.0 0.1
				energy = 1.0 0.1
				size = 0.0 0.6
				size = 1.0 0.6
				fixedEmissions = false
				randomInitalVelocityOffsetMaxRadius = 0.2
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				//Get the inputs from the other config.
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.1
				fixedScale	= .45
				energy		= 0.8
				speed		 = 1.5
				name = plume
				modelName = RealPlume/MP_Nazari_FX/KWbooster
				fixedEmissions = false
				sizeClamp = 50
				randomInitalVelocityOffsetMaxRadius = 0.2
				randConeEmit
				{
					density = 1 0.1
					density = 0 1
				}
				logGrow
				{
					density = 1.0 1
					density = 0.1 3
					density = 0.0 2
				}
				logGrowScale
				{
					density = 1.0 0.0
					density = 0.8 0.5
					density = 0.46 0.75
					density = 0.2 1
					density = 0.1 2
					density = 0.0 3
				}
				linGrow
				{
					density = 1.0 1
					density = 0.46 1
					density = 0.2 3
					density = 0.05 7
					density = 0.0 7
				}
				speed
				{
					density = 1.0 2
					density = 0.46 2.5
					density = 0.2 2.5
					density = 0.05 3
					density = 0.0 3
				}
				xyForce
				{
					density = 1 0.95
					density = 0.24 0.9
					density = 0.0 1
				}
				emission
				{
					density = 1.0 4.0
					density = 0.8 3.5
					density = 0.2 3.5
					density = 0.1 2.9
					density = 0.05 2.3
					density = 0.0 2.25
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 2
					density = 0.3 2
					density = 0.05 0.5
					density = 0.0 0.5
				}
				size
				{
					density = 1.0 0.8
					density = 0.8 0.65
					density = 0.2 0.55
				}
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,8
				fixedScale	= 0.35
				name = smoke
				modelName = RealPlume/MP_Nazari_FX/smokebooster
				speed = 1.75
				grow = 0.0 0
				grow = 1.0 0.1
				renderMode = "Billboard"
				collide = true
				physical = true
				collideRatio = 0
				stickiness = 0.5
				sizeClamp = 100
				angle = 0.0 1.0
				angle = 45.0 1.0
				angle = 50.0 1.0
				distance = 0.0 1.0
				distance = 100.0 1.0
				distance = 110.0 1.0
				logGrow
				{
					density = 1.0 20
					density = 0.1 25
					density = 0.0 2
				}
				logGrowScale
				{
					density = 1.0 2
					density = 0.8 2.5
					density = 0.46 3
					density = 0.2 3
					density = 0.1 3
					density = 0.0 5
				}
				linGrow
				{
					density = 1.0 0
					density = 0.46 0
					density = 0.2 0
					density = 0.05 5
					density = 0.0 10
				}
				emission
				{
					density = 1.0 5.0
					density = 0.05 4
					density = 0.0 0
					power = 1 1
					power = 0.01 0.2
					power = 0 0
				}
				energy
				{
					density = 1.0 3
					density = 0.3 3
					density = 0.05 0.1
					density = 0.0 0.0
				}
				size
				{
					density = 1.0 1
					density = 0.8 1.2
					density = 0.6 2
					density = 0.2 3
					density = 0.0 7
				}
			}
			MODEL_MULTI_SHURIKEN_PERSIST
			{
				transformName = ThrustTransform
				localRotation = 0,0,0
				localPosition = 0,0,-0.5
				fixedScale	= 0.1
				name = slag
				modelName = Squad/FX/SRB_Large
				emission = 0.0 0
				emission = 0.01 0.05
				emission = 1.0 0.2
				speed = 0.0 1
				speed = 1.0 1
				offset = 1
				size = 0.0 0.2
				size = 1.0 0.2
				fixedEmissions = false
				randomInitalVelocityOffsetMaxRadius = 0.2
				randConeEmit
				{
					density = 1 0.4
					density = 0.5 0.8
					density = 0.1 1
					density = 0 1
				}
				xyForce
				{
					density = 1 0.9
					density = 0.35 0.93
					density = 0.0 1
				}
				energy
				{
					density = 1.0 6
					density = 0.3 5
					density = 0.05 2
					density = 0.0 1.5
				}
			}
		}
	}

	@MODULE[ModuleEngines*]
	{
		@name = ModuleEnginesFX
		%powerEffectName = Solid-Lower
		useThrustCurve = True
		thrustCurve
		{
			key = 1 0.754
			key = 0.66 1
			key = 0.33 0.66
			key = 0 0.1
		}
	}
}

 

Share this post


Link to post
Share on other sites
On 11/29/2018 at 8:56 PM, Gordon Dry said:

What is the most common reason for plumes (aka. smoke puffs) going upwards instead of downwards?

IME, a TWR of less than one is definitely the most common reason.

Share this post


Link to post
Share on other sites

Aye. Just cracking wise. I mean, even given that, it's still true that the most common reason for smoke plumes going up is a TWR of less than one. :D You know, like when you've completely screwed the pooch on your lifter and you fire off the nukes way too low because they're all that you've got and it's just not enough....

That said, I've noticed that the plume has become wrong for the swivel; it starts at the top of the bell now. I'm guessing there are some configs that need to be updated because of the parts facelift in the latest update, and figuring that you can chalk it up to that.

Share this post


Link to post
Share on other sites

I love this mod, but How can I edit the LV-N PLume to be less bright and burning into my eyes.

This is seriously burning my eyes out, send help.

Share this post


Link to post
Share on other sites
1 hour ago, HLSA30 said:

hi please, can actualize to 1.5.x?

It works great, no need to update.

Share this post


Link to post
Share on other sites
2 hours ago, HLSA30 said:

is not compatible with ckan

Just set CKAN to look for 1.4 mods too...

Share this post


Link to post
Share on other sites
9 hours ago, Natokerbal said:

Sooooo, who's gonna update this for 1.6 new engines?

+1

Share this post


Link to post
Share on other sites
4 hours ago, Natokerbal said:

I honestly doubt anyone will update it.

Does 1.6 even add new engines? I thought they were just reskined.

Share this post


Link to post
Share on other sites
1 hour ago, Nightside said:

Does 1.6 even add new engines? I thought they were just reskined.

The poodle may need a two-over...

I'll see myself out.

Peace.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.