Jump to content

[1.11.x] Endurance (from Interstellar) Continued... (V1.13) 20th Feb 2021


JPLRepo

Recommended Posts

1 hour ago, JPLRepo said:

Your enthusiasm is great. As I've stated several times the mod works in 1.2.2. What doesn't work so well is atmospheric flight because time needs to be spent balancing the parts CoM and CoT, etc. a fair bit of time (spare free time) that I currently don't have. I have asked for volunteers to assist with this several times. It requires just a bit of knowledge of how to adjust cfg files and trial and error. But as yet, I've had a couple volunteer only to fade away. Are you volunteering?, if so drop me a PM.

Hey,

I've provided the cfg changes for the Lander, apart from that, everything else seems to be working fine

Link to comment
Share on other sites

2 hours ago, Jasseji said:

Hey,

I've provided the cfg changes for the Lander, apart from that, everything else seems to be working fine

Oh thanks I must have missed/forgotten. I'll implement it tonight then and do an updated release.

Link to comment
Share on other sites

A small suggestion, if it is still in time to be considered: the lander problem I think is that the main engines are integrated, and thus have a single thrust vector, on or off is all the choice we have. We can tweak the body CoM and/or CoT as is to fly well without cargo, OR we can tweak it to fly well with cargo... but not both, because adding any significant cargo at all means the CoM will shift significantly down, and either one way or the other it moves it out of whack and causes uncontrollable torque in some flight situations. A single set of CoT/CoM settings for the body is not going to solve this issue for all flight profiles.

Now, if the main engines were to be separate (think three separate sets of engines/nozzles), allowing us to activate/toggle them through action groups for example, we could adapt the CoT on-the-fly to a good degree to the shifting CoM (disengage the 'lower' pair of engines when flying empty, engage them when flying with cargo). That and a certain allowance of gimbal should make it flexible enough to adapt to most reasonable flight conditions.

Just a suggestion of course, I'm well aware that it means more work than a one-time parameter change on the existing cfg/model.

Link to comment
Share on other sites

9 minutes ago, theaveragepxtseryu said:

There was a 1.2 version of it but it got deleted...why?

Because it wasn't an actual update. If you downloaded it, all it had was a single file called Endurance.snl sooooooo :huh:

Edited by TheRagingIrishman
Link to comment
Share on other sites

On 15.05.2017 at 2:00 AM, swjr-swis said:

A small suggestion, if it is still in time to be considered: the lander problem I think is that the main engines are integrated, and thus have a single thrust vector, on or off is all the choice we have. We can tweak the body CoM and/or CoT as is to fly well without cargo, OR we can tweak it to fly well with cargo... but not both, because adding any significant cargo at all means the CoM will shift significantly down, and either one way or the other it moves it out of whack and causes uncontrollable torque in some flight situations. A single set of CoT/CoM settings for the body is not going to solve this issue for all flight profiles.

Now, if the main engines were to be separate (think three separate sets of engines/nozzles), allowing us to activate/toggle them through action groups for example, we could adapt the CoT on-the-fly to a good degree to the shifting CoM (disengage the 'lower' pair of engines when flying empty, engage them when flying with cargo). That and a certain allowance of gimbal should make it flexible enough to adapt to most reasonable flight conditions.

Just a suggestion of course, I'm well aware that it means more work than a one-time parameter change on the existing cfg/model.

TBH i dont agree with your point of view.

As i see it, this would have to be used as a Drop-Ship so with cargo you only use the VTOL Engines to slow you down, after dropping the Cargo, Main Engines are used to Launch to Orbit, hence the CoM/CoT should be tuned for no-Cargo applications

Link to comment
Share on other sites

48 minutes ago, Jasseji said:

As i see it, this would have to be used as a Drop-Ship so with cargo you only use the VTOL Engines to slow you down, after dropping the Cargo, Main Engines are used to Launch to Orbit, hence the CoM/CoT should be tuned for no-Cargo applications

If you want to confine the lander to that single use case only, sure, go ahead. How much use is it going to see in that capacity?

I really like the model of the lander, it's obvious a lot of effort went into it and it looks great... feels like an awful waste to not give it a bit more flexibility of use. But hey, that's me.

Link to comment
Share on other sites

10 hours ago, Jasseji said:

TBH i dont agree with your point of view.

As i see it, this would have to be used as a Drop-Ship so with cargo you only use the VTOL Engines to slow you down, after dropping the Cargo, Main Engines are used to Launch to Orbit, hence the CoM/CoT should be tuned for no-Cargo applications

For the most part, I agree.  Though I find that using the main engines, for orbital maneuvers of any type, to be superior to the VTOL engines, at least with the many types of vehicles that I have tested.  I think that MechJeb prefers engines to be in the back.

Also, optimizing the Lander for this function will define it from the Ranger which is more of a recon ship.  BTW, I also think that the Lander should have a lot more inventory space than the Ranger.

Edited by thomash
Link to comment
Share on other sites

6 hours ago, JPLRepo said:

Gimbal and separate nozzles? So you mean 6 module engines? That's a fair bit of work.

Like I said, I recognise this. It's always easy to spout ideas when one is not the one to do the work. So never mind, it seems to be just me anyway daydreaming about the potential of this model.

If I ever decide to use it, I can clone and modify a vector to suit, slap six over the main engine nozzles, disable the main engine, maybe clip one or two ore tanks in to shift the CoM, and make the thing do exactly what I envision. More part heavy and losing some of the aesthetics and efficiency, but it'll work for me.

Link to comment
Share on other sites

17 hours ago, swjr-swis said:

If you want to confine the lander to that single use case only, sure, go ahead. How much use is it going to see in that capacity?

I really like the model of the lander, it's obvious a lot of effort went into it and it looks great... feels like an awful waste to not give it a bit more flexibility of use. But hey, that's me.

I dont want to, question, what purpose what it designed to perform - as i see it from the shape and engine placement, it's for shipping containers TO planet, they don't seem to be meant to be reused so the lander would reOrbit empty

Link to comment
Share on other sites

On 5/15/2017 at 8:46 PM, theaveragepxtseryu said:

There was a 1.2 version of it but it got deleted...why?

Is it just me or is this how flat earthers sound when they realize there stuff is wrong? "Noo, that stuff has been deleted, its fake news"

(No offense intended but this sounds kinda funny)]

Also I am seriously wondering if theres a 1.2.2 version for this mod.

Link to comment
Share on other sites

2 hours ago, Starslinger999 said:

Is it just me or is this how flat earthers sound when they realize there stuff is wrong? "Noo, that stuff has been deleted, its fake news"

(No offense intended but this sounds kinda funny)]

Also I am seriously wondering if theres a 1.2.2 version for this mod.

1 page back

On 5/14/2017 at 3:28 PM, JPLRepo said:

Your enthusiasm is great. As I've stated several times the mod works in 1.2.2. What doesn't work so well is atmospheric flight because time needs to be spent balancing the parts CoM and CoT, etc. a fair bit of time (spare free time) that I currently don't have. I have asked for volunteers to assist with this several times. It requires just a bit of knowledge of how to adjust cfg files and trial and error. But as yet, I've had a couple volunteer only to fade away. Are you volunteering?, if so drop me a PM.

Link to comment
Share on other sites

4 hours ago, dresoccer4 said:

so just tried installing this mod and loading up KSP, but it consistently crashes during loading. when i take the mod out of GameData, KSP loads up fine. Anyone else having this issue?

Under what version of KSP? Working fine for me under 1.3.  Logs please.

Link to comment
Share on other sites

23 minutes ago, Starslinger999 said:

This mod + Kargantua mod = Kerbal Interstellar Movie

kerbalstellar_by_link3r-d8pz1up.jpg

NOW IN THEATERS NOWHERE NEAR YOU!!!!

I can see both you and I have been waiting a very long time for a full Interstellar suite of mods :wink:

Edited by themaster401
Link to comment
Share on other sites

love the look of the but the landers thrust is set way too high and just spins out of control, i wasent sure if thats what was mentioned above so i thougth id drop it in again. aside from that tis a great laugh....

 

Link to comment
Share on other sites

Just now, Space Kadet said:

love the look of the but the landers thrust is set way too high and just spins out of control, i wasent sure if thats what was mentioned above so i thougth id drop it in again. aside from that tis a great laugh....

 

Yes that is correct... still looking for volunteers.. or time myself to fix it.

Link to comment
Share on other sites

2 hours ago, JPLRepo said:

Yes that is correct... still looking for volunteers.. or time myself to fix it.

Challenge accepted!
so i changes these lines in to landerbody confing
 

Quote

CoMOffset = 0, -3, 0
   
    CoLOffset = 0, -3.5, 0    

and added fins to the back of the lander, and heres how it flew

   

 

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...