JH4C Posted April 24, 2018 Share Posted April 24, 2018 Is there any way to have the lens remain colour when changing the brightness of the lens? It feels unrealistic to see a bright white lens with a coloured light pool, and turning the brightness of the lens down to 0.3 or 0.4 also feels "wrong." If not, no biggie; I'm mostly using this mod for the three (fantastic) lights you're adding, it'd just be nice for consistency. Quote Link to comment Share on other sites More sharing options...
IgorZ Posted April 24, 2018 Author Share Posted April 24, 2018 2 hours ago, JH4C said: Is there any way to have the lens remain colour when changing the brightness of the lens? It's tricky and won't work as expected in all the cases. Unity uses the RGB scheme to set a color, and if you're familiar with this model, you should know that the light intensity depends on the color components. E.g. "red" (1,0,0) is only 33% of intensity of the white light (1,1,1). In the professional engines the color definition has a special component - intensity, which let's the renderers to mix the lights correctly, but in Unity we have what we have. I think there can be some formula invented to keep the lens intensity looking realistically most of the time, but I chose to simply let people defining what they want. This thing isn't worth the efforts. That said: 2 hours ago, JH4C said: and turning the brightness of the lens down to 0.3 or 0.4 also feels "wrong." ...is a wrong statement. You're free to setup any values which you feel are good, and it won't be a cheat Quote Link to comment Share on other sites More sharing options...
sibaar Posted May 21, 2018 Share Posted May 21, 2018 It would be nice if you could add your mods to spacedock. Quote Link to comment Share on other sites More sharing options...
Brigadier Posted May 21, 2018 Share Posted May 21, 2018 14 hours ago, sibaar said: It would be nice if you could add your mods to spacedock. This is on github and available through CKAN. Quote Link to comment Share on other sites More sharing options...
LlamasAreNeat_ Posted June 5, 2018 Share Posted June 5, 2018 How do I access the lights? I looked for them but I couldn't find them. Quote Link to comment Share on other sites More sharing options...
IgorZ Posted June 5, 2018 Author Share Posted June 5, 2018 1 hour ago, LlamasAreNeat_ said: How do I access the lights? I looked for them but I couldn't find them. Do you mean how to install the mod or how to use the lights in flight? The installation process is explained in the OP. Quote Link to comment Share on other sites More sharing options...
LlamasAreNeat_ Posted June 5, 2018 Share Posted June 5, 2018 (edited) Quote Do you mean how to install the mod or how to use the lights in flight? The installation process is explained in the OP. Thanks for responding. I meant how do I use the lights? Edited June 5, 2018 by LlamasAreNeat_ First edit is because I forgot the "T". 2nd edit is because I forgot to quote IgorZ Quote Link to comment Share on other sites More sharing options...
IgorZ Posted June 5, 2018 Author Share Posted June 5, 2018 44 minutes ago, LlamasAreNeat_ said: Thanks for responding. I meant how do I use the lights? You use them the same way as you would use the stock lights. Attach them to a vessel in the editor, launch, and activate either thru the part's menu or by pressing "L" (turn on/off all the lights on the vessel). Keep in mind, that if you have more than 4 light parts on the vessel, you need to adjust your game video settings to let the video card properly rendering them (see notes in OP). Quote Link to comment Share on other sites More sharing options...
LlamasAreNeat_ Posted June 6, 2018 Share Posted June 6, 2018 5 hours ago, IgorZ said: You use them the same way as you would use the stock lights. Attach them to a vessel in the editor, launch, and activate either thru the part's menu or by pressing "L" (turn on/off all the lights on the vessel). Keep in mind, that if you have more than 4 light parts on the vessel, you need to adjust your game video settings to let the video card properly rendering them (see notes in OP). Nvm, I'm blind. I found them, Thanks for the attention though. Quote Link to comment Share on other sites More sharing options...
IgorZ Posted July 9, 2018 Author Share Posted July 9, 2018 1.8 (July 8th, 2018) [Change] Upgrade the ModuleManager dependency version. [Enhancement] Add Italian localization (IT_it). [Enhancement] Add Spanish localization (ES_es). Quote Link to comment Share on other sites More sharing options...
IgorZ Posted July 21, 2018 Author Share Posted July 21, 2018 This mod is now also available at: GitHub as a release ZIP. Spacedock. Quote Link to comment Share on other sites More sharing options...
IgorZ Posted October 17, 2018 Author Share Posted October 17, 2018 1.9 (OCtober 16th, 2018) [Change] KSP 1.5 compatibility. Quote Link to comment Share on other sites More sharing options...
Cubivore Posted October 20, 2018 Share Posted October 20, 2018 Just wanted to say thanks for maintaining this mod, I never play without it. Quote Link to comment Share on other sites More sharing options...
IgorZ Posted October 21, 2018 Author Share Posted October 21, 2018 8 hours ago, Cubivore said: Just wanted to say thanks for maintaining this mod, I never play without it. You're welcome! Quote Link to comment Share on other sites More sharing options...
IgorZ Posted December 27, 2018 Author Share Posted December 27, 2018 1.10 (December 22nd, 2018) [Change] KSP 1.6 compatibility. Quote Link to comment Share on other sites More sharing options...
Jesusthebird Posted December 27, 2018 Share Posted December 27, 2018 15 hours ago, IgorZ said: 1.10 (December 22nd, 2018) [Change] KSP 1.6 compatibility. Previous version is 1.9. So I would suggest changing the version number to something else as to squash any confusion that could arise. If its just a ksp version change perhaps something like 1.91 or 1.9.1 would be better. Ckan normally does pretty good with versioning but it likes to act weird with some mods that have strange version numbers(example: it thinks 0.12 is an updated version over 0.2, or..1.8.06 is an updated version over 1.8.3.4) I think it has something to do with the extra numeric values. I only know this shows a correct update because I check ckan regularly after a ksp update, and then came here to confirm(thanks to your update post) but others might be a bit confused to see the version go from 1.9 to 1.1 especally when they dont check ckan often. Cheers! Quote Link to comment Share on other sites More sharing options...
IgorZ Posted December 27, 2018 Author Share Posted December 27, 2018 43 minutes ago, Jesusthebird said: Previous version is 1.9. So I would suggest changing the version number to something else as to squash any confusion that could arise. If its just a ksp version change perhaps something like 1.91 or 1.9.1 would be better. Ckan normally does pretty good with versioning but it likes to act weird with some mods that have strange version numbers(example: it thinks 0.12 is an updated version over 0.2, or..1.8.06 is an updated version over 1.8.3.4) I think it has something to do with the extra numeric values. I only know this shows a correct update because I check ckan regularly after a ksp update, and then came here to confirm(thanks to your update post) but others might be a bit confused to see the version go from 1.9 to 1.1 especally when they dont check ckan often. Cheers! Not sure what do you mean. 1.10 (one-ten) is a logical increase to 1.9 (one-nine). There is no rule to have the minor number of the version to be in a range of [0; 9]. And I never seen any issues with CKAN in this matter. Quote Link to comment Share on other sites More sharing options...
rfelipe200 Posted December 27, 2018 Share Posted December 27, 2018 16 hours ago, IgorZ said: 1.10 (December 22nd, 2018) [Change] KSP 1.6 compatibility. I have a problem... The lights in my vessels lost their color after installing your mod. Do you know if there's a way around it? Quote Link to comment Share on other sites More sharing options...
JH4C Posted December 27, 2018 Share Posted December 27, 2018 1 hour ago, Jesusthebird said: it thinks 0.12 is an updated version over 0.2, or..1.8.06 is an updated version over 1.8.3.4 0.12 would be an update over 0.2 though, and 1.8.06 - or rather 1.8.6 (because the 0 is implied) - would be an update over 1.8.3.4, so that shows that CKAN is working as intended. It also shows that it should cope just fine with 1.10 coming after 1.9. Quote Link to comment Share on other sites More sharing options...
IgorZ Posted December 27, 2018 Author Share Posted December 27, 2018 2 hours ago, rfelipe200 said: I have a problem... The lights in my vessels lost their color after installing your mod. Do you know if there's a way around it? Are you playing KSP 1.6.0? Have you updated ModuleManager to the latest version? Which parts specifically have lost their colors and how does it look now? Have their light color reverted to white or it's just the lens color that changed? Quote Link to comment Share on other sites More sharing options...
rfelipe200 Posted December 27, 2018 Share Posted December 27, 2018 21 minutes ago, IgorZ said: Are you playing KSP 1.6.0? Have you updated ModuleManager to the latest version? Which parts specifically have lost their colors and how does it look now? Have their light color reverted to white or it's just the lens color that changed? Yes, yes, both stock lights and they looks as default, and the light color reverted to a hot-white... It seems to have reverted to the mods default, come to think of it. This is how it looks like right now: Spoiler That's how it did before: Spoiler Quote Link to comment Share on other sites More sharing options...
IgorZ Posted December 27, 2018 Author Share Posted December 27, 2018 11 minutes ago, rfelipe200 said: Yes, yes, both stock lights and they looks as default, and the light color reverted to a hot-white... It seems to have reverted to the mods default, come to think of it. Hmm, it looks something has changed in 1.6.0. The stock lights adjustment was always a hack, not a big surprise it eventually stopped working. Please, share the log too. I'll take a look when at home. Quote Link to comment Share on other sites More sharing options...
rfelipe200 Posted December 28, 2018 Share Posted December 28, 2018 3 hours ago, IgorZ said: Hmm, it looks something has changed in 1.6.0. The stock lights adjustment was always a hack, not a big surprise it eventually stopped working. Please, share the log too. I'll take a look when at home. Here you go: https://drive.google.com/open?id=1tO6y7JY_Tg1ZiL0Gm5tt4q26ERvrhAWv Quote Link to comment Share on other sites More sharing options...
IgorZ Posted December 28, 2018 Author Share Posted December 28, 2018 Just now, rfelipe200 said: Here you go: https://drive.google.com/open?id=1tO6y7JY_Tg1ZiL0Gm5tt4q26ERvrhAWv Wrong log file. I gave a link to the troubleshooting Wiki with purpose Please, give me the right one. Btw, Just checked in my setup - no issues found. The light color and the lens works fine for me. I have only a few mods in my game, though. Quote Link to comment Share on other sites More sharing options...
rfelipe200 Posted December 28, 2018 Share Posted December 28, 2018 1 minute ago, IgorZ said: Wrong log file. I gave a link to the troubleshooting Wiki with purpose Please, give me the right one. Btw, Just checked in my setup - no issues found. The light color and the lens works fine for me. I have only a few mods in my game, though. I'm trying to find it, but there's no log file in my KSP_Data folder. How do I generate it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.