Jump to content

[1.4.x-1.8.x] Airplane Plus - R26.4 (Fixed issues/Github is up to date) (Dec 21, 2019)


blackheart612

Recommended Posts

13 minutes ago, blackheart612 said:

@allista That's where my thoughts go to. The helicopter engines in Airplane Plus have FSengineBladed as modules for propulsion, not ModuleEngines/ModuleEnginesFX

And FSengineBladed inherits FSengine, which is not related to ModuleEngines at all, but uses IThrustProvider which is a stock(?) interface new to me. Though I doubt TCA can use IThrustProvider instead of ModuleEngines, because it has to tap into velocity and atmosphere curves, thrust limiters and so on.

Link to comment
Share on other sites

I forgot that TCA use engine thrust limitation on part right click menu instead of main throttle. Because of that simple MM patch might not be enough to add TCA module on Airplane Plus engine parts. Time to learn a bit more about PIDs and kOS for VTOL/Helicopter craft builders. I will try to update my old scripts to use advantage of new GUI and be more user friendly for users who are new to any kind of coding stuff. Meanwhile, old kOS script is still available along with other craft files made for KSP 1.0.5.

Nothing fancy, it just set main throttle trough PID to hover on zero vertical velocity or at certain altitude. You still need some skill to create stable craft and have to steer it in desired direction. But it is good start until something better become available.

Link to comment
Share on other sites

49 minutes ago, ZW03 said:

Can someone please give me a link to a working version of Procedural wings? I've been looking everywhere! Thanks!

 

If you're talking about B9 then I've been getting them from ckan by setting allowed versions to 1.3.

 

------------------------------------------------------------------------------
I've updated the AJE configs to include the new engine:
as the Wright R-3350-23 Duplex-Cyclone (2200hp used on the Stratofortress) and Wright R-3350-26W Duplex-Cyclone (2800hp used on the skyraider).

I've also added configs for the Bumblebee for various versions of the Bristol Centaurus:
Bristol Centaurus I (2000hp)
Bristol Centaurus VII (2520hp)
Bristol Centaurus Mk373 (3220hp)

 

I've been trying to write configs for the helicopter engines but hitting a bit of a brick wall. I delete the FSEngine- modules and replace them with AJE modules but the thrust isn't applied properly. Instead of the thrust going up it goes forward, which indicates that the AJE modules need a thrust transform orientated 90 degrees to FS. There's not a lot I can do about that, so I was hoping that, if I ask @blackheart612 really extra nicely he'd be willing to add a second thrust transform orientated front up for AJE configs to the models? So, erm, pretty please with a green Kerbal on top?

Edited by Citizen247
Link to comment
Share on other sites

1 minute ago, Citizen247 said:

If you're talking about B9 then I've been getting them from ckan by setting allowed versions to 1.3.

I've updated the AJE configs to include the new engine:
as the Wright R-3350-23 Duplex-Cyclone (2200hp used on the Stratofortress) and Wright R-3350-26W Duplex-Cyclone (2800hp used on the skyraider).

I've also added configs for the Bumblebee for various versions of the Bristol Centaurus:
Bristol Centaurus I (2000hp)
Bristol Centaurus VII (2520hp)
Bristol Centaurus Mk373 (3220hp)

 

I've been trying to write configs for the helicopter engines but hitting a bit of a brick wall. I delete the FSEngine- modules and replace them with AJE modules but the thrust isn't applied properly. Instead of the thrust going up it goes forward, which indicates that the AJE modules need a thrust transform orientated 90 degrees to FS. There's not a lot I can do about that, so I was hoping that, if I ask @blackheart612 really extra nicely he'd be willing to add a second thrust transform orientated front up for AJE configs to the models? So, erm, pretty please with a green Kerbal on top?

Can you give me a link? I haven't used CKAN.

 

Link to comment
Share on other sites

If you accept requests,You should add the "Rolls Royce Dart" and the "Rolls Royce Tyne" turboprop engines to the mod,these seem like good historical aircraft engines for this mod.:D

Examples:

Rolls Royce Dart:

P1050421-690x460.jpg

 

Rolls Royce Tyne:

23943564312_94cce29830_b.jpg

 

 

 

 

Edited by Audiobotguy03
To change and remove some things
Link to comment
Share on other sites

On 12/24/2017 at 10:01 PM, blackheart612 said:

I'll look into it, @Audiobotguy03, but bear in mind I temporarily have no plans to add engines after the next update that I will launch.

@Ninadragonborn This is not made for RSS.

Okay then,this is my only engine request for this mod,so no worries.:D 

(My apologies for editing this reply quite a lot. :P)

Edited by Audiobotguy03
To edit the post
Link to comment
Share on other sites

11 hours ago, Ninadragonborn said:

so i can't play in RSS system than right

Well, you can try to use @Citizen247's AJE patch to make things more realistic, but that is the closest thing you'll get to be able to use RSS with this mod.

Link to comment
Share on other sites

OP = Fire Post, aka the title page

1 hour ago, Ninadragonborn said:

sorry i do not come to forum often Nobody likes me here

Aww, don't worry bud. I'm kinda like you too :)

Link to comment
Share on other sites

1 hour ago, Ninadragonborn said:

but what is OP

Hang mous over underscored(with dots) acronims to find out. In this case, it is pointing to first post of this thread. Sometimes is just easier to post link for relevant part:

User Patches:

Tweakscale Compatibility          RPM Compatibility          AJE Compatibility

F-16 Cockpit RPM          Remotetech Config

Community Tech Tree

 

 

Link to comment
Share on other sites

12 hours ago, Murican_Jeb said:

OP = Fire Post, aka the title page

Aww, don't worry bud. I'm kinda like you too :)

at least some one is like me

 

12 hours ago, kcs123 said:

Hang mous over underscored(with dots) acronims to find out. In this case, it is pointing to first post of this thread. Sometimes is just easier to post link for relevant part:

User Patches:

Tweakscale Compatibility          RPM Compatibility          AJE Compatibility

F-16 Cockpit RPM          Remotetech Config

Community Tech Tree

 

 

thanks for this patch guide i try to use them and see what they do

12 hours ago, klgraham1013 said:

Original Post.

I currently have no opinion of you.

OK got it thanks

Link to comment
Share on other sites

On 3/5/2017 at 2:38 AM, Citizen247 said:

If anyone is interested, I've written some configs for AJE, converting the engines to real world equivalents:

  • 8A "Spud" = Hispano-Suiza 8Aa
  • 9J "Baron" Rotary = Oberursel U.II
  • WMB VI "Vortex" = BMW VI
  • RR "Count" K.XI = Rolls-Royce Kestral V
  • K-25V "Cyclone" Radial =  Shvetsov ASh-25V
  • KB 601 "Tornado" = Daimler-Benz DB 601
  • KB 601 "Tornado"  = Daimler-Benz DB 605A
  • K-2800 "Bumblebee" Radial = R-2800-18W Double Wasp
  • K-2800 "Bumblebee" Radial = Pratt & Whitney R1830-86 Twin Wasp
  • K-2800 "Bumblebee" Radial = Bristol Centaurus I
  • K-2800 "Bumblebee" Radial = Bristol Centaurus VII
  • K-2800 "Bumblebee" Radial = Bristol Centaurus Mk373
  • K-3350 "Tempest" Radial Engine = Wright R-3350-23 Duplex-Cyclone
  • K-3350 "Tempest" Radial Engine = Wright R-3350-26W Duplex-Cyclone
  • K-14 "Divine Wind" Radial = Nakajima Sakae
  • K1710 "Whirlwind" = Allison V-1710-89
  • RR "Marlin" = Rolls-Royce Merlin 46
  • RR "Marlin" = Packard Merlin V-1650-7
  • RR "Kraken" = Rolls-Royce Griffon 65 
  • KM-105P "Silver Crow" = Klimov M-105
  • KP-12 "Bear" Kontraprop = Kuznetsov NK-12MV
  • RR K56 "Titan" Turboprop = Rolls-Royce T56 Turboprop
  • KT6A "Kitty" Turboprop = Pratt & Whitney PT6 Turboprop
  • K76 "Predator" Turboprop = Garrett TPE331-10
  • KT6C "Kitty" Turboshaft Engine = Pratt & Whitney Canada PT6C-67C
  • J-56 "Lotus" High-Bypass Turbofan = CFM56-7B18 Turbofan
  • J-85 "Tiger" Afterburning Turbofan =  General Electric Afterburning J85
  • J-119 "Cheetah" Afterburning Turbofan = Pratt & Whitney F119

 

If anyone wants them the module manager patch is added below:

  • 
     /////////////////////////////////////////////////////////////////
     //								//
     //			Airplane Plus AJE configs		//
     //			      by Citizen247			//
     //								//
     /////////////////////////////////////////////////////////////////	
    
     // EARLY ENGINES:
     //Based on the Hispano-Suiza 8Aa powering the Spad S.VII
    @PART[spadprop]:FOR[AJE]
    {
    	@title= Hispano-Suiza 8Aa
    	@manufacturer = Hispano-Suiza
    	@description = A WW1-era water-cooled V8 engine used extensively in Entente Aircraft.
    	@mass= 0.215
    
    	@rescaleFactor = 0.72 //Should be ~0.9m with cowling
    	
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		
    		%useOxygen = true
    		
    		%displacement = 717.77
    		%compression = 4.7
    		%minRPM = 1000
    		%maxRPM = 2000
    		%power = 150
    		%gearratio = 0.593
    		%BSFC = 7.435E-8
    		%ramAir = 0.2
    		%exhaustThrust = 0.0
    		%meredithEffect = 0.0
    		%boost0 = 0
    		%rated0 = 0
    		%boost1 = 0
    		%rated1 = 0
    		%switchAlt = -1
    		%turbo = false
    		%propName = 81in2CS
    	}
    }
    
     //Based on the Oberursel UR.II that powered the Fokker "Red Baron" Triplane
    @PART[fokkerprop]:FOR[AJE]
    {
    	@title= Oberursel U.II
    	@manufacturer = Motorenfabrik Oberursel
    	@description = A nine cylinder Rotary engine powering the Fokker Dr.I Triplane
    	@mass= 0.1465
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		
    		%useOxygen = true
    		
    		%displacement = 915.35
    		%compression = 5
    		%minRPM = 800
    		%maxRPM = 1400
    		%power = 110
    		%gearratio = 1.0
    		%BSFC = 7.435E-8
    		%ramAir = 0.2
    		%exhaustThrust = 0.0
    		%meredithEffect = 0.0
    		%boost0 = 0
    		%rated0 = 0
    		%boost1 = 0
    		%rated1 = 0
    		%switchAlt = -1
    		%turbo = false
    		%propName = 81in2CS
    	}
    }
    
     //Based on the BMW VI interwar engine
    @PART[51prop]:FOR[AJE]
    {
    	@title= BMW VI
    	@manufacturer = Bayerische Motoren Werke (BMW) AG
    	@description = BMW's first water-cooled V12 engine, built in the 1920s.
    	@mass= 0.510
    
    	@MODULE[ModuleEngines*]
    	{
    		@name = ModuleEnginesAJEPropeller
    		%useOxygen = True
    		
    		%displacement = 2864
    		%compression = 5.5
    		%minRPM = 1000
    		%maxRPM = 2000
    		%power = 650
    		%gearratio = 0.5
    		%BSFC = 2.000E-7
    		%coolerEffic = 0
    		%coolerMin = -200
    		%ramAir = 0
    		%exhaustThrust = 0
    		%meredithEffect = 0
    		%boost0 = 0
    		%rated0 = 0
    		%boost1 = 0
    		%rated1 = 0
    		%cost1 = 0
    		%switchAlt = 40000
    		%turbo = false
    		%propName = 10ftFP
    	}
    }
    
     //Based on the Rolls-Royce Kestral
    @PART[hawkerprop]:FOR[AJE]
    {
    	@title= Rolls-Royce Kestral V
    	@manufacturer = Rolls-Royce
    	@description = A major 685hp V12 British aviation engine of the interwar period. The Kestral Powered many RAF aircraft including the Hawker Fury, Britain's first 200mph+ fighter.
    	@mass= 0.434
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    	
    		 //Settings based on R-1830, couldn't find anything solid so hoping that is close enough.
    		displacement = 1300
    		compression = 6.7
    		minRPM = 1400
    		maxRPM = 2900
    		power = 685
    		gearratio = 0.553
    		BSFC = 1.1E-7
    		coolerEffic = -0.35
    		coolerMin = 0
    		ramAir = 0.15
    		exhaustThrust = 0.0		
    		meredithEffect = 0.0
    		boost0 = 48
    		rated0 = 4800
    		boost1 = 0
    		rated1 = 0
    		cost1 = 0
    		switchAlt = 40000
    		wastegateMP = 48
    		propName = Wildcat
    	}
    }
    
     //Based on the Shvetsov ASh-25V
    @PART[chaikaprop]:FOR[AJE]
    {
    	@title= Shvetsov ASh-25V
    	@manufacturer = Shvetsov
    	@description = A nine cylinder radial aircraft engine produced in the Soviet Union as a licenced reproduction of the Wright R-1820 Cyclone.
    	@mass= 0.560
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    	
    		 //Settings based on R-1830, couldn't find anything solid so hoping that is close enough.
    		displacement = 1829.4
    		compression = 6.7
    		minRPM = 1350
    		maxRPM = 2700
    		power = 800
    		gearratio = 0.666666666666667
    		BSFC = 1.1E-7
    		coolerEffic = -0.35
    		coolerMin = 0
    		ramAir = 0.15
    		exhaustThrust = 0.0		
    		meredithEffect = 0.0
    		boost0 = 48
    		rated0 = 4800
    		boost1 = 0
    		rated1 = 0
    		cost1 = 0
    		switchAlt = 40000
    		wastegateMP = 48
    		propName = Wildcat
    	}
    }
    
     // PRE-MODERN ENGINES:
     //The Daimler-Benz 605a engine used in ME109 from 1942 onwards.
    +PART[109Prop]:FOR[AJE]
    {
    	@name=AJP_109_605Prop
    	@title=Daimler-Benz DB 605A
    	@manufacturer=Daimler-Benz
    	@description= WWII-era V-12 liquid-cooled piston engine, the DB-605A as produced by Daimler-Benz (GER). Used on the Messerschmitt Bf 109 fighter.
    	@mass=0.976
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  DB 605 A
    		%displacement = 2176
    		%compression = 6.9
    		%minRPM = 1670
    		%maxRPM = 2800
    		%power = 1700
    		%gearratio = 0.594
    		%BSFC = 1.2747E-7
    		%coolerEffic = 0.325
    		%coolerMin = 0
    		%ramAir = 0
    		%exhaustThrust = 1
    		%meredithEffect = 0.015
    		%boost0 = 39.3
    		%rated0 = 2300
    		%boost1 = 39.3
    		%rated1 = 5650
    		%cost1 = 165
    		%switchAlt = 3500
    		%turbo = false
    		%wastegateMP = 38.9
    		%propName = RotolRX5
    		
    		%propDiam = 3
    	}
    	
    	@MODULE[ModuleEngines]
    	{
    		!PROPELLANT[IntakeAir]{}
    	}
    }
    
     //The Daimler-Benz 601 engine used in ME109 from 1942 onwards.
    @PART[109Prop]:FOR[AJE]
    {
    	@title=Daimler-Benz DB 601
    	@manufacturer=Daimler-Benz
    	@description= WWII-era V-12 liquid-cooled piston engine, the DB-601 as produced by Daimler-Benz (GER). Used on early model Messerschmitt Bf 109 fighters.
    	@mass=0.760
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  DB 601
    		%displacement = 2070
    		%compression = 6.9
    		%minRPM = 1670
    		%maxRPM = 2500
    		%power = 1175
    		%gearratio = 0.594
    		%BSFC = 1.2747E-7
    		%coolerEffic = 0.325
    		%coolerMin = 0
    		%ramAir = 0
    		%exhaustThrust = 1
    		%meredithEffect = 0.015
    		%boost0 = 39.3
    		%rated0 = 2300
    		%boost1 = 39.3
    		%rated1 = 5650
    		%cost1 = 165
    		%switchAlt = 3500
    		%turbo = false
    		%wastegateMP = 38.9
    		%propName = RotolRX5
    		
    		%propDiam = 3
    	}
    }
    
    
    @PART[zeroprop]:FOR[AJE]
    {
    	@title= Nakajima Sakae
    	@manufacturer= Nakajima Aircraft Company
    	@description= 14 Cylinder air-cooled radial engine used by the Empire of Japan from 1939. Notably used by the Mitsubishi A6M "Zero".
    	@mass= 0.756
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    	
    		 //Settings based on R-1830, couldn't find anything solid so hoping that is close enough.
    		displacement = 1700
    		compression = 7.1
    		minRPM = 1350
    		maxRPM = 2700
    		power = 1150
    		gearratio = 0.5833
    		BSFC = 1.1E-7
    		coolerEffic = -0.35
    		coolerMin = 0
    		ramAir = 0.4
    		exhaustThrust = 0.0
    		meredithEffect = 0.0
    		boost0 = 48
    		rated0 = 3000
    		boost1 = 52
    		rated1 = 5000
    		cost1 = 52
    		switchAlt = 3400
    		wastegateMP = 52
    		propName = Wildcat
    	}
    }
    
     //Wright R-3350-26W Duplex-Cyclone.
    +PART[duplexcyclone]:FOR[AJE]
    {
    	@name = APP_R3350
    	@title = Wright R-3350-23 Duplex-Cyclone
    	@manufacturer= Wright
    	@description= 2200HP radial with two-speed two-stage supercharger. Powered the B29 Stratofortress.
    	@mass=1.593 // 1.3 + .293
    
    	@rescaleFactor = 1.2
    	
    	@MODULE[ModuleEngines*]
    	{
    		@name = ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  R-3350-26W
    		%displacement = 3347
    		%compression = 6.85
    		%minRPM = 2200
    		%maxRPM = 2800
    		%power = 2200
    		%gearratio = 0.4375
    		%BSFC = 1.300E-7
    		%coolerEffic = 0.4
    		%coolerMin = 5
    		%ramAir = 1
    		%exhaustThrust = 1.2
    		%meredithEffect = 0.003
    		%boost0 = 59.5
    		%rated0 = 1100
    		%boost1 = 59.5
    		%rated1 = 4500
    		%cost1 = 415
    		%switchAlt = 2900
    		%turbo = false
    		%wastegateMP = 59.5
    		%propName = HS6501A-0x4
    	}
    }
    
     //Wright R-3350-26W Duplex-Cyclone.
    @PART[duplexcyclone]:FOR[AJE]
    {
    	//@name = APP_R3350
    	@title = Wright R-3350-26W Duplex-Cyclone
    	@manufacturer= Wright
    	@description= 2700HP radial with two-speed two-stage supercharger and water injection, rated at 2340HP at 4.5km static. Used by AD-1 (A-1) Skyraider.
    	@mass=1.593 // 1.3 + .293
    
    	@rescaleFactor = 1.2
    	
    	@MODULE[ModuleEngines*]
    	{
    		@name = ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  R-3350-26W
    		%displacement = 3347
    		%compression = 6.7
    		%minRPM = 2200
    		%maxRPM = 2800
    		%power = 2800
    		%gearratio = 0.4375
    		%BSFC = 1.300E-7
    		%coolerEffic = 0.4
    		%coolerMin = 5
    		%ramAir = 1
    		%exhaustThrust = 1.2
    		%meredithEffect = 0.003
    		%boost0 = 59.5
    		%rated0 = 1100
    		%boost1 = 59.5
    		%rated1 = 4500
    		%cost1 = 415
    		%switchAlt = 2900
    		%turbo = false
    		%wastegateMP = 59.5
    		%propName = HS6501A-0x4
    	}
    }
    
    @PART[corsairprop]:FOR[AJE]
    {
    	//@name = APP_R1830
    	@title = Pratt & Whitney R1830-86 Twin Wasp
    	@manufacturer=Pratt & Whitney
    	@description= 1200HP maximum, 1100HP rated at 5.25km. Used on F4F-4 Wildcat.
    	@mass=0.64
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  R-1830-86
    		%displacement = 1829.4
    		%compression = 6.7
    		%minRPM = 1350
    		%maxRPM = 2700
    		%power = 1200
    		%gearratio = 0.666666666666667
    		%BSFC = 1.100E-7
    		%coolerEffic = 0.25
    		%coolerMin = 0
    		%ramAir = 0.3
    		%exhaustThrust = 0
    		%meredithEffect = 0
    		%boost0 = 48
    		%rated0 = 400
    		%boost1 = 48
    		%rated1 = 4800
    		%cost1 = 50
    		%switchAlt = 800
    		%turbo = false
    		%wastegateMP = 48
    		%propName = Wildcat
    	}	
    }
     //SXT provides a series of R-2800 engines already, and Airplane plus now has a dedicated R3350 model. So this can be a neglected British engine, the Bristol Centaurus.
     //Bristol Centaurus I - 2000hp
    +PART[corsairprop]:FOR[AJE]
    {
    	@name = APP_BCentaurus_I
    	@title = Centaurus I
    	@manufacturer=Bristol Airplane Company
    	@description= First version of a long running British radial engine that would go on to power aircraft as diverse as Hawker Fury, Fairey Spearfish and Blackburn Beverley.
    	@mass= 1.22
    	
    	@rescaleFactor = 1.2
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//
    		%displacement = 3270
    		%compression = 6.7
    		%minRPM = 1800
    		%maxRPM = 2700
    		%power = 2000
    		%gearratio = 0.4
    		%BSFC = 1.100E-7
    		%coolerEffic = 0.25
    		%coolerMin = 0
    		%ramAir = 0.3
    		%exhaustThrust = 0
    		%meredithEffect = 0
    		%boost0 = 60
    		%rated0 = 10
    		%boost1 = 52.5
    		%rated1 = 7950
    		%cost1 = 300
    		%switchAlt = 800
    		%turbo = true
    		%wastegateMP = 48
    		%propName = Curtiss12-2x3
    	}	
    }
     //Bristol Centaurus VII - 2520hp
    +PART[corsairprop]:FOR[AJE]
    {
    	@name = APP_BCentaurus_VII
    	@title = Centaurus VII
    	@manufacturer=Bristol Airplane Company
    	@description= Definitive WW2 version of the Bristol Centaurus. Powering British Aircraft such as the Hawker Fury and the Short Shetland.
    	@mass= 1.22
    	
    	@rescaleFactor = 1.2
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//
    		%displacement = 3270
    		%compression = 7.2
    		%minRPM = 2000
    		%maxRPM = 2800
    		%power = 2520
    		%gearratio = 0.4
    		%BSFC = 1.100E-7
    		%coolerEffic = 0.25
    		%coolerMin = 0
    		%ramAir = 0.3
    		%exhaustThrust = 0
    		%meredithEffect = 0
    		%boost0 = 60
    		%rated0 = 10
    		%boost1 = 52.5
    		%rated1 = 7950
    		%cost1 = 300
    		%switchAlt = 800
    		%turbo = true
    		%wastegateMP = 48
    		%propName = Curtiss12-2x3
    	}	
    }
     //Bristol Centaurus mk373 - 3220hp
    +PART[corsairprop]:FOR[AJE]
    {
    	@name = APP_BCentaurus_373
    	@title = Centaurus Mk373
    	@manufacturer=Bristol Airplane Company
    	@description= The most powerful version of the Centaurus engine producing 3220hp with direct fuel injection and water injection, developed for the Bristol Beverley.
    	@mass= 1.542
    	
    	@rescaleFactor = 1.2
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//
    		%displacement = 3270
    		%compression = 7.2
    		%minRPM = 2000
    		%maxRPM = 2800
    		%power = 3220
    		%gearratio = 0.6
    		%BSFC = 1.100E-7
    		%coolerEffic = 0.25
    		%coolerMin = 0
    		%ramAir = 0.3
    		%exhaustThrust = 0
    		%meredithEffect = 0
    		%boost0 = 60
    		%rated0 = 10
    		%boost1 = 52.5
    		%rated1 = 7950
    		%cost1 = 300
    		%switchAlt = 800
    		%turbo = true
    		%wastegateMP = 48
    		%propName = HS6501A-0x4
    	}	
    }
    
     //Pratt & Whitney R-2800-18W Double Wasp
    +PART[corsairprop]:NEEDS[!SXT]:FOR[AJE]
    {
    	@name=APP_R2800Prop
    	@title= Pratt & Whitney R-2800-18W Double Wasp
    	@manufacturer=Pratt & Whitney 
    	@description=WWII-era 2100HP (2450HP wet) twin-row 18-cylinder water-injected radial with a strong three-speed (only 2 modeled) two-stage supercharger. Note, due to modeling issues, will only develop rated altitude horsepower (high blower) when at maximum speed. Used on F4U-4 Corsair, XF6F-6 Hellcat, DC-6B.
    	@mass = 1.381
    
    	@rescaleFactor = 1.2
    	
    	@MODULE[ModuleEngines*]
    	{
    		@name = ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  R-2800-18W
    		%displacement = 2804.5
    		%compression = 6.75
    		%minRPM = 2200
    		%maxRPM = 2800
    		%power = 2380
    		%gearratio = 0.45
    		%BSFC = 1.104E-7
    		%coolerEffic = 0.35
    		%coolerMin = 5
    		%ramAir = 0.5
    		%exhaustThrust = 1
    		%meredithEffect = 0.005
    		%boost0 = 60
    		%rated0 = 10
    		%boost1 = 52.5
    		%rated1 = 7950
    		%cost1 = 347
    		%switchAlt = 1500
    		%turbo = false
    		%wastegateMP = 60
    		%propName = HS6501A-0x4
    	}
    }
    
    @PART[fighterProp]:FOR[AJE]
    {
    	@title = Allison V-1710-89
    	@manufacturer= Allison
    	@description= WWII-era V-12 liquid-cooled turbosupercharged piston engine. Provides 1520HP at sea level at 60inHg, holding 1500HP to approx 6.1km. 11ft 10in 3-blade constant speed propeller. Used on P-38H/J Lightning. In that installation, sea level limit is 1425HP.
    	@mass=0.91
    	
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  V-1710-89
    		%displacement = 1710
    		%compression = 6.65
    		%minRPM = 2300
    		%maxRPM = 3000
    		%power = 1520
    		%gearratio = 0.5
    		%BSFC = 1.196E-7
    		%coolerEffic = 0.13
    		%coolerMin = -15
    		%ramAir = 0.15
    		%exhaustThrust = 0
    		%meredithEffect = 0.004
    		%boost0 = 60
    		%rated0 = 6100
    		%boost1 = 40
    		%rated1 = 0
    		%cost1 = 0
    		%switchAlt = 40000
    		%turbo = true
    		%wastegateMP = 60
    		%propName = JSBJug
    		
    		%propDiam = 3.6068
    		%CpTweak = 0.46
    		%CtTweak = 0.46
    	}
    }
    
     //SXT already provides a Merlin 46 so this can be the American Licenced built V-1650-7 variant
    @PART[merlin]:FOR[AJE]
    {
    	@title=Packard Merlin V-1650-7
    	@manufacturer=Packard
    	@description= WWII-era V-12 liquid-cooled piston engine, the Merlin as produced by Packard (US). 1620HP at sea level with ram air with a very strong two-speed two-stage supercharger (1710 max with ram air at just over 3km, second peak 1410HP at 7.9km). 67inHG max boost. Used on the P-51B/C/D Mustang. 11ft 2in 4 blade constant speed propeller.
    	@mass=0.917 // 746kg engine
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  V-1650-7
    		%displacement = 1647
    		%compression = 6
    		%minRPM = 1670
    		%maxRPM = 3000
    		%power = 1601
    		%gearratio = 0.479
    		%BSFC = 1.2747-07
    		%coolerEffic = 0.77
    		%coolerMin = 15
    		%ramAir = 1
    		%exhaustThrust = 1
    		%meredithEffect = 0.015
    		%boost0 = 67
    		%rated0 = 1400
    		%boost1 = 67
    		%rated1 = 6200
    		%cost1 = 340
    		%switchAlt = 3200
    		%turbo = false
    		%wastegateMP = 67
    		%propName = MustangHProp
    		
    		%propDiam = 3.4036
    	}
    	
    	@MODULE[ModuleEngines]
    	{
    		!PROPELLANT[IntakeAir]{}
    	}
    }
    
     //If SXT isn't installed though...
    +PART[merlin]:NEEDS[!SXT]:FOR[AJE]
    {
    	@name=AJP_MERLIN
    	@title = Rolls-Royce Merlin 46
    	@description= WWII-era V-12 liquid-cooled piston engine. Provides 1260HP at sea level, rising to 1440HP at 4.42km (full throttle height). Single-speed single-stage supercharger. 10ft 11in 3-blade constant speed propeller.
    	@mass=0.752 //623kgengine
    	
    	@MODULE[ModuleEngine*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  Merlin46
    		%displacement = 1647
    		%compression = 6
    		%minRPM = 1793
    		%maxRPM = 3000
    		%power = 1260
    		%gearratio = 0.477
    		%BSFC = 1.260E-7
    		%coolerEffic = 1
    		%coolerMin = -30
    		%ramAir = 0.35
    		%exhaustThrust = 0.75
    		%meredithEffect = 0.007
    		%boost0 = 60.5
    		%rated0 = 4420
    		%boost1 = 0
    		%rated1 = 0
    		%cost1 = 0
    		%switchAlt = 40000
    		%turbo = false
    		%wastegateMP = 60.5
    		%propName = RotolRX5
    	}
    }
    
     //Rolls-Royce Griffon65 used in late model Spitwires
    @PART[spitfiremerlin]:FOR[AJE]
    {
    	@title=Rolls-Royce Griffon 65 piston engine
    	@manufacturer=Rolls-Royce
    	@description= Rolls-Royce Griffon 65. 2035HP sea level with a two stage two speed supercharger. Used on late model Spitfires.
    	@mass=1.237
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  Griffon65
    		%displacement = 2239
    		%compression = 6
    		%minRPM = 2000
    		%maxRPM = 2750
    		%power = 2035
    		%gearratio = 0.51
    		%BSFC = 1.162E-7
    		%coolerEffic = 1
    		%coolerMin = -200
    		%ramAir = 0.9
    		%exhaustThrust = 1
    		%meredithEffect = 0.011
    		%boost0 = 80.8
    		%rated0 = 500
    		%boost1 = 80.8
    		%rated1 = 3800
    		%cost1 = 390
    		%switchAlt = -1
    		%turbo = false
    		%wastegateMP = 80.8
    		%propName = GriffonProp
    	}
    	
    	@MODULE[ModuleEngines]
    	{
    		!PROPELLANT[IntakeAir]{}
    	}
    }
    
     //Soviet VK-105
    @PART[yakprop]:FOR[AJE]
    {
    	
    	@title = Klimov M-105
    	@manufacturer = Klimov
    	@description= WW2-era Soviet V12 Liquid-cooled piston engine, powering a number of Soviet aircraft.
    	@mass=0.752 //623kg engine
    	
    	@MODULE[ModuleEngine*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		%IspMultiplier = 1
    		%useOxygen = true
    		
    		//  MerlinXII
    		%displacement = 1647
    		%compression = 6
    		%minRPM = 1600
    		%maxRPM = 2700
    		%power = 1100
    		%gearratio = 0.666
    		%BSFC = 3.13E-7
    		%coolerEffic = 0.91
    		%coolerMin = -20
    		%ramAir = 0.3
    		%exhaustThrust = 0.7
    		%meredithEffect = 0.005
    		%boost0 = 55.3715
    		%rated0 = 3440
    		%boost1 = 0
    		%rated1 = 0
    		%cost1 = 0
    		%switchAlt = 40000
    		%turbo = false
    		%wastegateMP = 55.3715
    		%propName = RotolRX5
    	}
    }
    
     //MODERN ENGINES:
     //SXT has one of these too, but there's nothing else this could be... Kuznetsov NK-12 (Bear Bomber)
    +PART[KP12]:NEEDS[!SXT]:FOR[AJE]
    {
    	@name = AJP_NK12MV
    	@title= Kuznetsov NK-12MV
    	@manufacturer= Kuznetsov
    	@description= The world's most powerfull turboprop, powering the Soviet TU-95 "Bear" Bomber.
    	@mass=2.9
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    
    		minRPM = 2000
    		maxRPM = 5000
    		power = 14795
    		gearratio = 0.5
    		BSFC = 8.47E-8
    		ramAir = 1
    		exhaustThrust = 0.6
    		meredithEffect = 0.002
    		boost0 = 0
    		rated0 = 0
    		boost1 = 0
    		rated1 = 0
    		switchAlt = -1
    		turbo = false
    		wastegateMP = 52.5
    		propName = HS6501A-0x4
    	}
    }
    
     //Removes the part entirely is SXT is installed.
    -PART[KP12]:NEEDS[SXT]:FOR[AJE] {}
    
     //Allison T40 Contra-Rotating Turboprop
    @PART[KP12]:FOR[AJE]
    {
    	@title = Allison T40
    	@manufacturer= Allison
    	@description= A 1950's Turboprop with contra-rotating propellors. 5100hp powering a number of a prototype aircraft.
    
    	@mass = 1.1
    
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    
    		minRPM = 2000
    		maxRPM = 5000
    		power = 5100
    		gearratio = 0.5
    		BSFC = 8.47E-8
    		ramAir = 1
    		exhaustThrust = 0.6
    		meredithEffect = 0.002
    		boost0 = 0
    		rated0 = 0
    		boost1 = 0
    		rated1 = 0
    		switchAlt = -1
    		turbo = false
    		wastegateMP = 52.5
    		propName = HS6501A-0x4
    	}
    }
    
     //Rolls-Royce T56
    @PART[herculesprop]:FOR[AJE]
    {
    	@title= Rolls-Royce T56 Turboprop
    	@manufacturer= Rolls-Royce
    	@description= 4350 horsepower at takeoff
    	@mass=0.95
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    		
    		minRPM = 2200
    		maxRPM = 2800
    		power = 4350
    		gearratio = 0.5
    		BSFC = 8.47E-8
    		ramAir = 1
    		exhaustThrust = 0.5
    		meredithEffect = 0.001
    		boost0 = 0
    		rated0 = 0
    		boost1 = 0
    		rated1 = 0
    		switchAlt = -1
    		turbo = false
    		wastegateMP = 52.5
    		propName = HS6501A-0x4
    	}
    }
    
     //Pratt & Whitney PT6 Turboprop
    @PART[tbmProp]:FOR[AJE]
    {
    	@title= Pratt & Whitney PT6 Turboprop
    	@manufacturer= Pratt & Whitney
    	@description= Modern turboprop, 675 HP at takeoff
    	@mass=0.35
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    		
    		minRPM = 2000
    		maxRPM = 3000
    		power = 680
    		gearratio = 0.5
    		BSFC = 8.47E-8
    		ramAir = 1
    		exhaustThrust = 0.5
    		meredithEffect = 0.001
    		boost0 = 0
    		rated0 = 0
    		boost1 = 0
    		rated1 = 0
    		switchAlt = -1
    		turbo = false
    		wastegateMP = 52.5
    		propName = RotolRX5
    	}
    }
    
     //Garrett TPE331-10
    @PART[predatorprop]:FOR[AJE]
    {
    	@title= Garrett TPE331-10
    	@manufacturer= Garrett/Honeywell
    	@description= A small and light turboprop
    	@mass=0.25
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    		
    		minRPM = 2000
    		maxRPM = 3000
    		power = 940
    		gearratio = 0.5
    		BSFC = 8.47E-8
    		ramAir = 1
    		exhaustThrust = 0.5
    		meredithEffect = 0.001
    		boost0 = 0
    		rated0 = 0
    		boost1 = 0
    		rated1 = 0
    		switchAlt = -1
    		turbo = false
    		wastegateMP = 52.5
    		propName = RotolRX5
    	}
    }
    
     //Pratt & Whitney Canada PT6C-67C
    @PART[609prop]:FOR[AJE]
    {
    	@title= PT6C-67C
    	@manufacturer= Pratt & Whitney
    	@description= The PT6 is one of the most popular turboprop aircraft engines in history. This variant is designed for tilt-rotor aircraft.
    	@mass=0.188
    	@MODULE[ModuleEngines*]
    	{
    		@name=ModuleEnginesAJEPropeller
    		IspMultiplier = 1
    		useOxygen = true
    		
    		minRPM = 2000
    		maxRPM = 3000
    		power = 1679
    		gearratio = 0.5
    		BSFC = 8.47E-8
    		ramAir = 1
    		exhaustThrust = 0.5
    		meredithEffect = 0.001
    		boost0 = 0
    		rated0 = 0
    		boost1 = 0
    		rated1 = 0
    		switchAlt = -1
    		turbo = false
    		wastegateMP = 52.5
    		propName = RotolRX5
    	}
    }
    
     //General Electric J85
    @PART[f5jet]:FOR[AJE]
    {
    	@title= General Electric J85
    	@description= A small afterburning turbojet. One of the most successful military Jet engines in history. Powering aircraft from the Northrop F5 to the White Knight carrier aircraft that carried SpaceShipOne.
    	@manufacturer= General Electric 
    	@mass= 0.191
    
    	
    	CoMOffset = 0.0, 0.8, 0.0
    
    	 //AJE has afterburner as a throttle setting so we don't want to have a mode switch.
    	-MODULE[MultiModeEngine] {}
    	-MODULE[ModuleEngines*] {}
    	-MODULE[ModuleEngines*] {}
    
    	MODULE	//[ModuleEngines*]::HAS[#engineID[Dry]]
    	{
    		name = ModuleEnginesAJEJet
    		maxThrust = 22
    		useEngineResponseTime = False
    		
    		Area = 0.085
    		BPR = 0
    		CPR = 8.3
    		FPR = 0
    		Mdes = 0.7
    		Tdes = 250
    		eta_c = 0.95
    		eta_t = 0.98
    		eta_n = 0.8
    		FHV = 28E6
    		bird = 1250
    		TAB = 3140
    		exhaustMixer = False
    		thrustUpperLimit = 44
    		adjustableNozzle = False
    		maxT3 = 977
    
    		defaultTPR = 0.95
    		drySFC = 0.97
    		dryThrust = 13.1
    		wetThrust = 22
    	}
    	
    	//-MODULE[ModuleEngines*]::HAS[#engineID[Wet]] {}
    }
     
     //Pratt & Whitney F119 (raptorjet)
    @PART[raptorjet]:FOR[AJE] //Turboramjet
    {
    	@title = Pratt & Whitney F119
    	@manufacturer = Pratt & Whitney
    	@mass = 1.8
    	@description = 2D Thrust vectored supercruise capable turbofan engine used by the F22 Raptor.
    	
    	-MODULE[MultiModeEngine] {}
    	
    	@MODULE[ModuleEngines*]::HAS[#engineID[Dry]]
    	{
    		@name = ModuleEnginesAJEJet
    		@maxThrust=160
    
    		Area = 0.58
    		BPR = 0
    		CPR = 8.5
    		FPR = 0
    		Mdes = 0.3
    		Tdes = 280
    		eta_c = 0.95
    		eta_t = 0.98
    		eta_n = 0.9
    		FHV = 32000000
    		bird = 1360
    		TAB = 3800
    		exhaustMixer = True
    		thrustUpperLimit = 400
    		maxT3 = 1200
    
    		defaultTPR = 0.85
    		drySFC = 0.8
    		dryThrust = 120
    		wetThrust = 160
    	}
    	
    	-MODULE[ModuleEngines*]::HAS[#engineID[Wet]] {}
    }
    
     //CFM56-7B18 Turbofan Jet
    @PART[cfm56]:FOR[AJE]
    {	
    	@title = CFM56-7B18 turbofan
    	@manufacturer = CFM International
    	@description = An efficient Turbofan used on civilian and military aircraft.
    	@mass= 2.5
    	@rescaleFactor= 1.24 //1.55 meters
    
    	@MODULE[ModuleEngines*]
    	{
    		@name = ModuleEnginesAJEJet
    		@maxThrust = 233.5
    		
    		Area = 1.55
    		BPR = 4.24
    		CPR = 30
    		FPR = 1.7
    		Mdes = 0.8
    		Tdes = 250
    		eta_c = 0.95
    		eta_t = 0.98
    		eta_n = 0.9
    		FHV = 32000000
    		bird = 1600
    		TAB = 0
    		exhaustMixer = False
    		adjustableNozzle = False
    		thrustUpperLimit = 280
    		maxT3 = 900
    		intakeMatchArea = True
    		
    		defaultTPR = 0.95
    		drySFC = 0.357
    		dryThrust = 86.7
    	}
    
    	@MODULE[ModuleResourceIntake]
    	{
    		@name = AJEInlet
    		Area = 3.0
    		#@AJE_TPR_CURVE_DEFAULTS/PilotTube/TPRCurve {}
    		
    		inletTitle = #$@AJE_TPR_CURVE_DEFAULTS/PilotTube/title$
    		inletDescription = #$@AJE_TPR_CURVE_DEFAULTS/PilotTube/description$
    	}
    	
    	@MODULE[ModuleAnimateHeat]
    	{
    		@name = ModuleAJEJetAnimateExhaustHeat
    		animationName = #$ThermalAnim$
    		!ThermalAnim = delete
    		
    		responseSpeed = 0.0002
    	}
    }
    
    
     //Rotors
     //Bellprop - Based on Allison Model 250
    //@PART[bellprop]:FOR[AJE]
    {
    	@title = Rolls Royce 250-C30P Turboshaft
    	@manufacturer = Rolls Royce
    	@description = 
    	@mass = 0.265 //Engine = 114kg, Rotor Guesstimate = ~150kg
    
    	//%CoMOffset = 0, 0, -1
    	//%rescaleFactor=0.5
    
    	!MODULE[FSpropellerAtmosphericNerf]{}
    	!MODULE[FSengineBladed]{}
    	
    	MODULE
    	{
    		thrustVectorTransformName = baseReference
    		heatProduction = 0
    		
    		ignitionThreshold = 0.1
    		minThrust = 0
    		maxThrust = 45
    
    		name = ModuleEnginesAJERotor
    		IspMultiplier = 1
    		useOxygen = true
    		rpm = 310		//I think this is rotor speed, and this is my best guess for an average.
    		r = 6			//Gear ratio? Something else?
    		weight = 1500		//Max take-off weight?
    		power = 650		//Horse power presumably
    		BSFC = 8.47e-8		//0.468 kg/kW-h.
    		
    		useEngineResponseTime = False
    
    		PROPELLANT
    		{
    			name = Kerosene
    			ratio = 1
    			DrawGauge = True
    			
    			resourceFlowMode = STACK_PRIORITY_SEARCH
    		}
    	}
    	
    	!MODULE[ModuleReactionWheel] {}
    	MODULE
    	{
    		name = ModuleReactionWheel
    		
    		PitchTorque = 10
    		YawTorque = 10
    		RollTorque = 5
    	}
    }
    
    
     //AIR INTAKES
    @PART[mk1intake]:FOR[AJE]
    {
    	@MODULE[ModuleResourceIntake]
    	{
    		@name = AJEInlet
    		%Area = 0.6
    		#@AJE_TPR_CURVE_DEFAULTS/PilotTube/TPRCurve {}
    		
    		inletTitle = #$@AJE_TPR_CURVE_DEFAULTS/PilotTube/title$
    		inletDescription = #$@AJE_TPR_CURVE_DEFAULTS/PilotTube/description$
    	}
    }

    I rescale engines to be similar to their real size, as does AJE for most of it's configs. If you don't want that just comment out or delete any "@rescaleFactor = [value]" lines.

hi i have problem with engines not in full thrust and i am playing in RSS where do i put this configurations and thanks

Link to comment
Share on other sites

unfortunately this is the result i am getting out of this

xyTnrJp.jpg

it now show right thrust in hanger ( i am using Kerbal engineer to show me all important data ) but

when i go into game its seriously dropped and for example instead of 65 kn thrust i get only 8 kn

i can't understand the reason for this and also i am playing in RSS and using AJE but not using FAR for it makes my elevon inverted

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...