linuxgurugamer 17,813 Posted August 28, 2016 Share Posted August 28, 2016 (edited) @PeteTimesSix has not been around since November, 2015. @RealTimeShepherd had been doing some maintenance and partially updated it to 1.1.3 I (@linuxgurugamer) fixed a problem on 1.1.3 related to the toolbar, and, after chatting with RealTimeSheperd, am taking over maintenance of this mod. Please note that for now, it's merely a maintenance mode, in which I'll fix bugs and keep it working for the current version of KSP. The new version for KSP 1.4.1 has new dependencies New Dependencies Click Through Blocker ToolbarController CKAN has been updated to install the dependencies, if needed. Download full version: https://github.com/linuxgurugamer/VesselViewer/releases Download RPM-only version: Go to the release and download the file VesselView-RPM-**** Download Toolbar-only version: Go to the release and download the file VesselView-toolbar-**** Source Code: https://github.com/linuxgurugamer/VesselViewer License: MIT Donations gratefully accepted https://www.patreon.com/linuxgurugamer (The following has been copied from the original OP) Introducing (again) Vessel Viewer Continued! Ever fly an IVA mission, happened to hear an explosion and wished you knew if it was antenna no. 54 or your main engine that just blew up? Like to fly without the GUI but also a fan of knowing how much fuel there is in your tanks? Wondering just how hot is Deadly Reentry making those wings? Perhaps you'd like a more visual way of telling whenever your wings are stalling when running Ferram Aerospace? Ever wished you could activate engines and take science reports without having to go into external view, but too lazy or forgetful to setup action groups? I've got you covered. Complete edition download (requires Toolbar, RasterPropMonitor) Available on Spacedock Comes with a User manual! Source code. License. Current list of extensions: DISCO MODE example plugin (included) Part Selector (included) Edited April 23, 2018 by linuxgurugamer Quote Link to post Share on other sites
Adentissa 19 Posted August 28, 2016 Share Posted August 28, 2016 Hooha! That's a very good news for this beautiful mod and for all the IVA fans! You seem to know what you're doing, so good luck folk! Quote Link to post Share on other sites
Azimech 7,709 Posted August 28, 2016 Share Posted August 28, 2016 You wizard! You did it, again! Quote Link to post Share on other sites
ISE 148 Posted August 28, 2016 Share Posted August 28, 2016 Yes honestly @linuxgurugamer your the best with this stuff! Thank You fro bringing it back to life! Quote Link to post Share on other sites
Mecripp 1,040 Posted August 28, 2016 Share Posted August 28, 2016 Thanks for helping keep some of this great mods alive Quote Link to post Share on other sites
V8jester 1,152 Posted August 28, 2016 Share Posted August 28, 2016 Thank you good sir! Us IVA fans really appreciate you keeping the cobwebs out of this amazing mod. Quote Link to post Share on other sites
Jack Wolfe 1,584 Posted August 28, 2016 Share Posted August 28, 2016 Thanks for reviving this mod! Quote Link to post Share on other sites
dlrk 205 Posted August 29, 2016 Share Posted August 29, 2016 Thank you very much! Quote Link to post Share on other sites
Bombaatu 341 Posted August 29, 2016 Share Posted August 29, 2016 I downloaded & installed this manually; when I loaded a craft, the log file got spammed with NREs: Quote [EXC 18:54:06.295] NullReferenceException: Object reference not set to an instance of an object VesselView.VesselViewPlugin.Update () Is there anything else you might need? Quote Link to post Share on other sites
linuxgurugamer 17,813 Posted August 30, 2016 Author Share Posted August 30, 2016 3 hours ago, Bombaatu said: I downloaded & installed this manually; when I loaded a craft, the log file got spammed with NREs: Is there anything else you might need? The whole log file. A description on how you installed it. And the craft files might be useful. Quote Link to post Share on other sites
Bombaatu 341 Posted August 30, 2016 Share Posted August 30, 2016 1 hour ago, linuxgurugamer said: The whole log file. A description on how you installed it. And the craft files might be useful. Here's the log file: https://www.dropbox.com/s/4a1lvva6vdsaq1x/VesselView problem KSP.log?dl=0 I downloaded the updated package from Spacedock, extracted the zip & copied the GameData/VesselView folder into my own GameData folder. Side note: I had just updated RPM via CKAN. After I had posted the issue, I restored my previous version of VV but I still got the NREs. I suspect the issue is not with VV but my CKAN install of RMP - Mea Culpa on reporting the issue; I should have done more due diligence. Quote Link to post Share on other sites
linuxgurugamer 17,813 Posted August 30, 2016 Author Share Posted August 30, 2016 I would also suggest that you install VV via CKAN as well. CKAN will make sure everything is installed properly, and in most cases is fine for installs. That being said, I see where it is happening, and will add a check to avoid the error message. Quote Link to post Share on other sites
linuxgurugamer 17,813 Posted August 30, 2016 Author Share Posted August 30, 2016 While I don't understand why it was happening, (shouldn't have happened), I suppose a bad RPM install might cause issues. So I've added a simple check to avoid the errors and uploaded a new release. Quote Link to post Share on other sites
*MajorTom* 218 Posted August 30, 2016 Share Posted August 30, 2016 (edited) 2 hours ago, linuxgurugamer said: While I don't understand why it was happening, (shouldn't have happened), I suppose a bad RPM install might cause issues. So I've added a simple check to avoid the errors and uploaded a new release. NRE in 0.8.1 and it totally not work Sorry it work great with latest RPM 0.27.1 Edited August 30, 2016 by *MajorTom* Quote Link to post Share on other sites
martinezfg11 321 Posted August 30, 2016 Share Posted August 30, 2016 How do you do it... Thanks for keeping this alive. Quote Link to post Share on other sites
Qwarkk 52 Posted August 30, 2016 Share Posted August 30, 2016 are there any awesome mods you aren't maintaining @linuxgurugamer? You're everywhere at the moment - thank you. Quote Link to post Share on other sites
Tybot 36 Posted September 6, 2016 Share Posted September 6, 2016 (edited) I never realized how much fun controlling everything via IVA is! I have noticed some small issues, if anyone else can corroborate. For me the Heat and Drag Lift modes just show a static model, and custom display modes repeats Disco Mode and Part Selector all the way down the RPM screen. Has anyone noticed anything like this before I start tearing apart my local install? Correction edit: Drag actually does show the color model, it was Lift that's not rendering, and display mode thing seems to have been a fluke. Edited September 9, 2016 by Tybot Quote Link to post Share on other sites
Enceos 1,763 Posted September 9, 2016 Share Posted September 9, 2016 @linuxgurugamer You sure know how to fix stuff Quote Link to post Share on other sites
theonegalen 1,091 Posted September 9, 2016 Share Posted September 9, 2016 You know, lgg, if you ever leave KSP, we're going to lose a lot of great mods. Thanks for everything you do. Quote Link to post Share on other sites
BadRocketsCo. 23 Posted September 18, 2016 Share Posted September 18, 2016 Can I use this for getting the VAB view too like the old version? Quote Link to post Share on other sites
ChickenBot448 13 Posted September 22, 2016 Share Posted September 22, 2016 Does this require RasterPropMonitor to work? Quote Link to post Share on other sites
linuxgurugamer 17,813 Posted September 23, 2016 Author Share Posted September 23, 2016 On 9/22/2016 at 7:23 AM, ChickenBot448 said: Does this require RasterPropMonitor to work? It doesn't require it, but does work with it and is recommended Quote Link to post Share on other sites
*MajorTom* 218 Posted October 13, 2016 Share Posted October 13, 2016 any news about version for 1.2? Quote Link to post Share on other sites
MonkeyLunch 9 Posted October 13, 2016 Share Posted October 13, 2016 Kudo's for all your work maintaining all these abandoned mods. They are all gems and deserve it, and the game is better for it. Thumbs up! Quote Link to post Share on other sites
linuxgurugamer 17,813 Posted October 13, 2016 Author Share Posted October 13, 2016 20 minutes ago, *MajorTom* said: any news about version for 1.2? Not yet. I'm waiting for RPM to get updated before starting on it. I also have a lot of other mods in process. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.