N70

[literally every KSP version since 1.3] Kerbalism v2.1.2

Recommended Posts

On 4/2/2018 at 3:49 AM, Gordon Dry said:

I have set UnlinkedControl = full but I have no control after signal lost - in the middle of a maneuver burn and the engine stays on... :/

Me too. It's a bug?

Edit: Resolved. It's an option on difficult advanced options

Edited by Toranks

Share this post


Link to post
Share on other sites
7 hours ago, Toranks said:

Where is the hibernate/sleep option for satellites? It has been removed on kerbalism, but there are no alternatives...

I plan on bringing this back one day ;)

  • Like 2

Share this post


Link to post
Share on other sites

1.7.1 is out. I also released a 1.3.x backport.

Changelog:

### Changes since the last release

 * The Chemical Plant and External Life Support have had a repaint (PiezPiedPy)
 * Added Xenon Gas to the Radial Pressurized Tanks (PiezPiedPy)
 * Added Engines and RCS that use EC and/or LH2 when supported by a mod such as USI to the Planner (PiezPiedPy)
 * Added part specific tags (Gordon Dry)
 * A simple support patch for RealBattery - no final solution (Gordon Dry)
 * Recalculated pressure control EC consumption to be more realistic (PiezPiedPy)
 * Increase all crewable parts' EC because ECLSS uses EC constantly, you wanna survive in the Apollo LM, right? (Gordon Dry, PiezPiedPy)
 * Quick'n'dirty fix for GPOSpeedFuelPump to avoid shielding to be pumpable by default (Gordon Dry)
 * Reliability: mtbf depends mass;
     lighter parts last longer - max. ~16 years (~64 years in high quality),
     heavier parts last shorter - min. ~4 years (~16 years in high quality).
     Built in reliability modules don't take the whole part's mass into account, but their respective extra_mass (Gordon Dry)
 * Greenhouses now act like a scrubber and also will not use CO2 or produce O2 when in a breathable atmosphere (PiezPiedPy)
 * Reliability: mass and cost difference between standard and high quality is now relative to the part type (Gordon Dry)
 * Allow vessel config when there is no vessel signal (PiezPiedPy)
 * Fixed EVA Scrubber, ooops was broken by changes to Habitation (PiezPiedPy)
 * Fuel Cells are now configurable with H2+O2 and Monoprop+O2 processes (PiezPiedPy)
 * Added LH2+O2 processes to the Fuel Cells for USI and CryoTanks Support (PiezPiedPy)
 * Added Hydrogen Liquefaction and Liquid Hydrogen Evaporator processes to USI and CryoTanks Support (PiezPiedPy)
 * Fixed CryoTanks NRE in Planner and added LH2 to radial tanks for CryoTanks Support (PiezPiedPy)

 

Edited by N70
  • Like 3

Share this post


Link to post
Share on other sites

I have a couple of questions.

Is there a up to date chart on the usage and production of all resources and pretend resources like humidity? The planner is only useful for the current vessel being built and cannot plan for things like station building/expansion. I'm not opposed to doing my own math and I like charts. Does such a thing exist?

Does having 2 or more mobile processing labs increase the speed of research? I can't seem to get any data into a second lab so I can work on 2 things at once. Intended behavior or broken?

Is compatibility with multi-sample science parts from Dmagic orbital science on the radar to be fixed? currently only 1 sample can be collected before reset is required. Also compatibility with universal storage alkali fuel cell in the automation and background processes would be nice.

Are there any plans on making the chem plants and external life support parts in a radial mount(or making existing ones also radially mountable) and possibly compatible with tweakscale(more capacity with less part count)...and universal storage? US chem plants and external life support would be useful.

Share this post


Link to post
Share on other sites

ModuleManager show me this messages on log:

Spoiler

 


[....]

[LOG 06:07:57.493] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Command/command-pods/command-mk3-9/PART
[WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Command/command-pods/command-mk4-1/PART
[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Command/command-pods/command-ppd-1/PART
[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Utility/utility-pod-25/utility-pod-25/PART
[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Command/CentralHub/Central_Hub/PART
[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Command/Control/Control_g/PART
[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Command/Control/Cupola_g/PART
[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Science/ScienceLab_g/PART
[WRN 06:07:57.531] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.533] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Structural/Corridors/corridor_airlock/PART
[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.533] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Airlocks/airlock_end_g/PART
[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.533] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Airlocks/airlock_mid_g/PART
[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Garages/garage_adapter_g/PART
[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Habitats/Habitat_MK1_g/PART
[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Habitats/Habitat_MK2_g/PART
[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/cupola/cupola/PART
[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/hitchhikerStorageContainer/hitchikerStorageContainer/PART
[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/Mk1-2Pod/mk1-2CommandPod/PART
[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/Mk1-3Pod/mk1-3/PART
[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1Cockpits/mk1Cockpit/PART
[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1Cockpits/mk1CrewCabin/PART
[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1Cockpits/mk1InlineCockpit/PART
[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1LanderCan/mk1LanderCan/PART
[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1pod/mk1Pod/PART
[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk2CockpitInline/mk2CockpitInline/PART
[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk2CockpitStandard/mk2CockpitStandard/PART
[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk2LanderCan/mk2LanderCan/PART
[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk3CockpitShuttle/mk3CockpitShuttle/PART
[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/FuelTank/mk3Fuselage/CREW/PART
[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Science/LargeCrewedLab/largeCrewedLab/PART
[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Utility/mk2CrewCabin/mk2CrewCabin/PART
[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.537] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/KV1Pod/PART
[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.537] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/KV2Pod/PART
[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.537] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/KV3Pod/PART
[WRN 06:07:57.573] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.574] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/Mk2Pod/PART
[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.574] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/Size1_5_Lander/PART
[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$

[WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.575] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.575] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.575] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[WRN 06:07:57.575] [ModuleManager] Cannot find key CrewCapacity in SETUP
[ERR 06:07:57.575] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$

[LOG 06:07:57.575] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[mk3Cockpit_Shuttle] to Squad/Parts/Command/mk3CockpitShuttle/mk3CockpitShuttle/PART

[....]

[LOG 06:08:03.336] [ModuleManager] Done patching
[WRN 06:08:03.342] [ModuleManager] Errors in patch prevents the creation of the cache
[LOG 06:08:03.346] [ModuleManager] ModuleManager: 2542 patches applied, found <color=orange>140 errors</color>
140 errors related to GameData/Kerbalism/Profiles/Default.cfg

 

 

 



What is this?
Possible bug: Now command pods and similar no longer have stored nitrogen
I cant activate humidifier on pods

ZZFLNmK.jpg

Edited by Toranks
New data

Share this post


Link to post
Share on other sites

ATTENTION MODULE MANAGER REPORTED 256 ERRORS ON KERBALISM DEFAULT CONFIG!!!

after the last update

 

Edited by tonimark

Share this post


Link to post
Share on other sites

1.7.1.1 is out for KSP 1.4.x and 1.3.1. It fixes the MM bugs.

  • Like 5

Share this post


Link to post
Share on other sites

Hi, my container does not show any food or water (fresh install of KSP1.4.4 and Kerbalism 1.7.1.1), am I missing something ?

Spoiler

 

screenshot2000-1530696923113_m.png

screenshot1999-1530696922486_m.png

edit : Humm same stuff with 1.6, I need to clean on my side first.

edit2 : After clearing all mods, just Kerbalism, I cannot found Container anymore. what?

Edited by ecaheti

Share this post


Link to post
Share on other sites

Thanks so much for the backport, great work. Where/who should I talk to to get the ckan copy updated?

Edit. Still got the same problems with SSPXR inflatables though :/

Edited by oslowa

Share this post


Link to post
Share on other sites

Does anyone if KERBALISM work with  Capsule Corp. Exploration ( Moon Village ) ?

 

 

Share this post


Link to post
Share on other sites
6 hours ago, Nathangun said:

Does anyone if KERBALISM work with  Capsule Corp. Exploration ( Moon Village ) ?

 

 

Not sure. But it would be an interesting tweak/patch to use nitrogen/O2 to inflate and have heavy shielding like the electric radiation shield that takes no power but is permanently on - however kerbalism will still think that you are on EVA if you are  walking in around in the done.   I'm not sure that  Kerbalism takes the occlusion of parts into account in regards to radiation.  

I have always wanted a mechanic that would treat an eva kerbal within a closed cargo bay (or a fairing if you can get in there) as if it was in an atmosphere.  Perhaps somehow using the aerodynamic occulsion model.  I had thought this would be used to be mainly to allow TextureReplacer to be okay with taking helmets off on the Mün or in orbit but the module could be applied the Capsule Corp parts as well. Unfortunately this dosen't exist.

Intersesting idea though!  How much does kerbalism calculate volume and surface area for the domes?

  • Like 2

Share this post


Link to post
Share on other sites
16 hours ago, theJesuit said:

How much does kerbalism calculate volume and surface area for the domes?

 

Jeez, that's a good question and above my technical skill. 

Share this post


Link to post
Share on other sites
On ‎7‎/‎4‎/‎2018 at 10:35 AM, ecaheti said:

Hi, my container does not show any food or water (fresh install of KSP1.4.4 and Kerbalism 1.7.1.1), am I missing something ?

Try deleting the Kerbalism folder and the MM files except the MM dll then reinstall Kerbalism

 

On ‎7‎/‎4‎/‎2018 at 11:47 AM, oslowa said:

Still got the same problems with SSPXR inflatables though :/

For the Habitats to inflate you will need a pressure controller, and enough nitrogen and O2 to fill them, don't forget EC too, then just wait for them to expand, adding extra pressure controllers will expand them quicker, it can take a while with just one, for example Kerbalisms Gravity ring will take approx. 3 days to inflate with a single Mk1 pod pressure controller.

 

On ‎7‎/‎7‎/‎2018 at 8:15 PM, theJesuit said:

How much does kerbalism calculate volume and surface area for the domes?

Kerbalism uses the parts bounding box to calculate volume if the part has no Habitat module

Edited by PiezPiedPy
  • Like 1

Share this post


Link to post
Share on other sites

thx for new update and backport. i have one bugs in backport 1.7.1.1.

in VAB/SPH, i can't open kerbalism menu like image below.

screenshot0.png?type=w773

ksp 1.3.1, kerbalism 1.7.1.1-bp, MM 3.0.4, CRP 0.10.0.0

Edited by BlackDragon Korean

Share this post


Link to post
Share on other sites
On ‎7‎/‎10‎/‎2018 at 7:46 AM, BlackDragon Korean said:

thx for new update and backport. i have one bugs in backport 1.7.1.1.

in VAB/SPH, i can't open kerbalism menu like image below.

ksp 1.3.1, kerbalism 1.7.1.1-bp, MM 3.0.4, CRP 0.10.0.0

Try the usual deleting the Kerbalism folder and the MM files except the MM dll then reinstall Kerbalism. Also if you have a Steam install validate it

For those who are not aware that there is a Discord server for Kerbalism, here you go https://discord.gg/NgFawe4

Edited by PiezPiedPy

Share this post


Link to post
Share on other sites

DMagic BioDrill can take 3 subsurface samples. In Kerbalism can take just 1 sample. Is this bug or feature?

Share this post


Link to post
Share on other sites
7 hours ago, -MadMan- said:

DMagic BioDrill can take 3 subsurface samples. In Kerbalism can take just 1 sample. Is this bug or feature?

Known bug.  Kerbalism replaces science modules with its own, and doesn't handle DMagic's custom multi-sample.

Share this post


Link to post
Share on other sites

Is there an option to reset the critical failure? I mean, I have a station in orbit and one of the reaction wheels got critically damaged. I don't care about it, as I have other, but there is this red icon in the Kerbalism window that is bugging me.

Share this post


Link to post
Share on other sites
6 hours ago, Darkherring said:

Is there an option to reset the critical failure? I mean, I have a station in orbit and one of the reaction wheels got critically damaged. I don't care about it, as I have other, but there is this red icon in the Kerbalism window that is bugging me.

An Kerbal on EVA can fix some failures and an engineer on EVA can fix all failures.

Share this post


Link to post
Share on other sites
On 7/8/2018 at 10:55 PM, PiezPiedPy said:

Try deleting the Kerbalism folder and the MM files except the MM dll then reinstall Kerbalism

Unfortunately it is not working. I've also tested to wipe KSP from everywhere on the PC (users & co), reinstall just Kerbal without Making History ext, wipe all MM files except dll...
Still got the problem.
 
for the record, i've downloaded Kerbalism from spacedock.
 

Share this post


Link to post
Share on other sites

Good new, there is now a ReadTheDocs for Kerbalism. It's a WIP, but better than nothing! https://kerbalism.readthedocs.io/en/latest/index.html

  • Like 6

Share this post


Link to post
Share on other sites
18 hours ago, ecaheti said:
Unfortunately it is not working. I've also tested to wipe KSP from everywhere on the PC (users & co), reinstall just Kerbal without Making History ext, wipe all MM files except dll...
Still got the problem.
 
for the record, i've downloaded Kerbalism from spacedock.
 

Did you install Community Resource Pack (CRP) Kerbalism requires it

Share this post


Link to post
Share on other sites
5 hours ago, PiezPiedPy said:

Did you install Community Resource Pack (CRP) Kerbalism requires it

Hey ! My bad, here is the point. 

Many thanks !

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now