JadeOfMaar

[1.7.3] OPT Reconfig v1.6.1 & OPT Legacy 1.4.0 [August 08, 2019]

Recommended Posts

@Cochies Is this how the particles always are or is this your attempt to fix it?

Are you running KSP in DirectX11? If you are, it would be best that you remove the plume because it becomes very broken, and replacing it with nearly anything else makes the situation much worse.

@PART[opt_mk2_engine_short]:AFTER[OPT_Reconfig]
{
	@EFFECTS
	{
		@running_thrust
		{
			!MODEL_MULTI_PARTICLE[flamethrust] {}
		}
	}
}

 

Share this post


Link to post
Share on other sites
25 minutes ago, JadeOfMaar said:

@Cochies Is this how the particles always are or is this your attempt to fix it?

Are you running KSP in DirectX11? If you are, it would be best that you remove the plume because it becomes very broken, and replacing it with nearly anything else makes the situation much worse.


@PART[opt_mk2_engine_short]:AFTER[OPT_Reconfig]
{
	@EFFECTS
	{
		@running_thrust
		{
			!MODEL_MULTI_PARTICLE[flamethrust] {}
		}
	}
}

 

This is my attempt to fix it.
  Now it doesn’t look very good, but when I decrease "speed =" it will be better.
I think not a very good exhaust is better than no exhaust.
I'm not a modder, I do it for myself.

Share this post


Link to post
Share on other sites

jh0xGaA.jpg

OPT Legacy 1.4.0

  • Minor engine tuning. ARI engines assume they're in vacuum at 0.1% or 0.001 atm.
  • Fixed parts having obsolete category "Propulsion" to "FuelTank".
  • Fixed drag cubes in Avatar hollow parts. This made payload-bearing planes un-playable.
  • Fixed drag cubes for Humpback hollow parts.
  • Changed J-61 engine plume. It breaks in DirectX 11.
  • Fixed parts having invalid dragModelType = override setting. This causes horrific drag effects.
  • Changed the internal names of Avatar parts (formerly "Chimera") that had a "C" designation to "A" to be inline with all other Avatar parts. The Chimera instances are soft-deprecated to not break craft files.
  • Legacy wings: removed lift surface module (again); raised actuator speed.
  • Applied IVAs (either stock placeholder or closely-matching OPT IVA):
    • Avatar Chimera cockpit
    • K Oulette and K TAV cockpit
  • Adjusted and normalized heat tolerances. Many in the Avatar and Stail family had > 3000K. Some other parts (mainly some cockpits) had only 1500K.
  • Resurrected Avatar Shuttle/Freight cockpit. With working docking node and hatch and ladder collider in cargo bay area. (No surface/top hatches. Sorry.)
  • Updated CCK config to exclude non-OPT parts like Breaking Ground's helicOPTer blades.

OPT Reconfig 1.6.0

  • Minor engine tuning. ARI engines assume they're in vacuum at 0.1% or 0.001 atm.
  • Consolidated and compartmentalized Dark Goo ecosystem. It's now divided across less configs and is easier to delete and disable without breaking things, for players who don't like it.
  • Added Ioncross Crew Support (a life support mod favored by other maintainers of OPT Spaceplane). ( @Starwaster @Stone Blue )
  • Added buff for Kerbal Foundries: Adjustable Landing Gear. Enables them to endure the weights and heat loads of OPT spaceplanes.
  • Updated B9PS and WBI integration in accordance with release of Snacks: Air! and Stress!
  • Updated B9PS and WBI integration in accordance with internally renaming some Chimera parts and soft-deprecation to avoid breaking craft files. The only thing that can break is Tweakscale configs.
  • Fixed B9 tank types for NF Propulsion being declared regardless of NF Propulsion's presence.
  • Fixed tank volume balancing.
    • Avatar and K full tanks now hold double that of hollow tanks (9360 LF).
    • Avatar and K tanks.
    • Bicouplers and tricoupler(s).
    • Avatar, K and Humpback adapters.
    • J and Stail to 2.5m adapters.
  • Fixed (removed) potential for BARIS module to add twice to science labs.
  • Fixed CRP IntakeAtm-for-all patch not working when planet does not have Oxygen.
  • Fixed syntax errors that break the OPT Power Spheres under WBI integration.
  • Fixed broken fusion fuel selection for OPT Power Spheres under WBI: Classic Mode.
    • Added several fusion fuel options to OPT Power Spheres under WBI: CRP Mode.
    • Options: Boron, Lithium, Lithium6, LqdDeuterium, LqdHe3, LqdHydrogen, LqdTritium.
    • Xenon option now fully treated as a fallback. Expect to be unable to use it in most cases.

DOWNLOAD - OPT Reconfig

DOWNLOAD - OPT Legacy

Share this post


Link to post
Share on other sites
Posted (edited)

I'm on KSP 1.7.3 and have just installed the above latest code. How do I remove the hard dependency of having SnacksFreshAir? I'm getting the following MM error:

Module ModuleB9PartSwitch threw during OnLoad: System.Exception: Fatal exception while loading fields on module ModuleB9PartSwitch on part  ---> System.Exception: Exception while loading field subtypes on type B9PartSwitch.ModuleB9PartSwitch ---> System.Exception: Exception while loading fields on subtype PartSubtype OPTSnacksAir ---> System.Exception: Exception while loading field tankType on type B9PartSwitch.PartSubtype ---> System.Collections.Generic.KeyNotFoundException: No tank type named 'OPTSnacksAir' exists

 

I have Snacks installed but haven't enabled the Air.CFG (the cfg that sets up the FreshAir/StaleAir resources).

Edited by bcqJC
typo

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, bcqJC said:

I have Snacks installed but haven't enabled the Air.CFG (the cfg that sets up the FreshAir/StaleAir resources).

Hey, thanks for noticing that. That's a serious oversight, sorry. It's easily fixed by adding this :NEEDS[SnacksFreshAir] at lines 102, 127 and 151 in GameData/OPT_Reconfig/OPT_B9PS_Snacks.cfg

I'll have an update posted in a moment.

SUBTYPE // change this
{
	name = OPTSnacksAir
	tankType = OPTSnacksAir
	title = FreshAir
	switchInFlight = true
}

SUBTYPE:NEEDS[SnacksFreshAir] //to this
{
	name = OPTSnacksAir
	tankType = OPTSnacksAir
	title = FreshAir
	switchInFlight = true
}

Edit: Update is up.

Edited by JadeOfMaar
Update is up

Share this post


Link to post
Share on other sites

@JadeOfMaar Custom or specific support for crewed parts shouldn't generally be needed for Ioncross; it configures every part that can contain crew.

Share this post


Link to post
Share on other sites

@Starwaster I remembered. The included config only takes care of OPT's intakes (most of which are a feature of the cockpits) and provides B9PS tank options.

Share this post


Link to post
Share on other sites
On 4/13/2018 at 12:51 PM, Rawenwarcrow said:

Hey @JadeOfMaar First of all, thanks for maintaining those mods :) I have a problem with the game telling me that:

"B9PartSwitch has encountered a fatal error and KSP needs to close

 No tank type named 'OPTOX' exists"

There's no log, all my mods are the latest version, including both OPT and OPT legacy, and of course B9PartSwitch itself... Any idea from where it can come from? Thanks again :)  (and sorry for my clumsy english...)

To get past things like this, you can just press "escape", although I find that this only occurs without KSP Interstellar Fuel Switch Core.

Share this post


Link to post
Share on other sites

That's really neat!
Also @JadeOfMaar Are you planning on converting OPT to KSP2?  As having these amazing spaceplane parts in KSP 2 would be fantastic even if it takes a while for them to show up.

Share this post


Link to post
Share on other sites

@JadeOfMaar

It's been a -really- long since I had KSP Installed, and I've been goofing around with FAR since it's apparently updated to 1.7 - out of curiosity is OPT Reconfig using it's own integration of FAR? So I don't need FAR by itself? Or do I have to use it alongside FAR?

Share this post


Link to post
Share on other sites
5 hours ago, ToastyOats said:

@JadeOfMaar

It's been a -really- long since I had KSP Installed, and I've been goofing around with FAR since it's apparently updated to 1.7 - out of curiosity is OPT Reconfig using it's own integration of FAR? So I don't need FAR by itself? Or do I have to use it alongside FAR?

OPT Reconfig contains its own FAR config which will cause problems if another FAR config exists for OPT parts. I do not include FAR itself so you must download it separately.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.