[1.12.3] Restock - Revamping KSP's art (Feb 25)

Drew Kerman · February 24, 2020

@Poodmund alright here is the full whitelist I had to compile for the mods I listed above to clear out any partloader errors in the log file. Not really all that bad.

Spoiler

// Ablative-Airbrake
Squad/Parts/Aero/HeatShield/heatshield.dds

// Deployable Batteries
Squad/Parts/Electrical/z-100Battery/
Squad/Parts/Electrical/z-400Battery/

// IFS
Squad/Parts/Utility/decouplerRadialTT-38K/model000.dds

// RemoteTech
Squad/Parts/Utility/commsDish16/

// AJE
Squad/Parts/Electrical/radialFlatSolarPanel/model

// Eve Optimized Engines
Squad/Parts/Engine/liquidEngine48-7S_v2/SparkV2
Squad/Parts/Engine/liquidEngineLV-T30/
Squad/Parts/Engine/liquidEngineLV-T45/
Squad/Parts/Engine/liquidEngineMainsail/
Squad/Parts/Engine/liquidEngineSkipper/

// Stock patches (https://forum.kerbalspaceprogram.com/index.php?/topic/139980-130-community-database-of-module-manager-patches-for-stock-ksp/)
Squad/Parts/Structural/stackAdapters/Assets/adapterLargeSmallBi
Squad/Parts/Structural/stackAdapters/Assets/adapterLargeSmallQuad
Squad/Parts/Structural/stackAdapters/Assets/adapterLargeSmallTri
Squad/Parts/Structural/stationHub/
Squad/Parts/Structural/structuralMicronode/
Squad/Parts/Structural/trussGirderAdapter/
Squad/Parts/Structural/trussGirderL/
Squad/Parts/Structural/trussGirderXL/
Squad/Parts/Utility/launchClamp1/
Squad/Parts/Utility/stackCouplers/Assets/stackQuadCoupler
Squad/Parts/Structural/stackAdapters/Assets/stackAdapters_diffuse.dds
Squad/Parts/Structural/stackAdapters/Assets/stackAdapters_normal.dds

// USI
Squad/Parts/Command/advancedSasModuleLarge/model
Squad/Parts/Utility/dockingPortSr/model

// WBI
Squad/Parts/Engine/rapierEngine/rapier
Squad/Parts/Resources/ISRU/ISRU

// boxsat
Squad/Parts/Utility/spotLightMk2/model

// Chop Shop
Squad/Parts/Command/probeRoverBody_v2/probeRoverBody_v2

// Kerballoon
Squad/Parts/Utility/ServiceBay/ServiceBay_125
Squad/Parts/Utility/ServiceBay/ServiceBay_250

// MagicSmokeIndustries
Squad/Parts/Utility/dockingPortJr/model

Nertea · February 25, 2020

On 2/24/2020 at 5:27 AM, dtoxic said:

hi all can some one help me with restock, i am trying to duplicate the"Launch Clamp" and resize it to half the size, i whitelisted the stock launch clamp in restock config file and used this patch

Hide contents

// Add additional launch clamp sizes
// Author: maculator
+PART[launchClamp1]
{
    @name = [launchClamp0]
    @title = TT18 Launch Stability Enhancer
    @rescaleFactor = 0.2 //1 = 100%
    @TechRequired = start
    @entryCost = 0
    @cost = 100
    @mass = 0.05
    @node_attach = 0.0, 1.354437, 0.8069194, 0.0, 0.0, -1.0, 0

Problem is i get the resized stock launchclamp witch is ok, but how would i go on to resize the Restock version? i am stuck

Make sure your patch runs after restock - that patch will run first!

dtoxic · February 25, 2020

17 minutes ago, Nertea said:

Make sure your patch runs after restock - that patch will run first!

Thank you!!!

Edit: Restock does not like resizing

https://imgur.com/wcX3WC1

Edited February 25, 2020 by dtoxic

New Horizons · March 1, 2020

What is the best reason to install Restock(Plus)? I am on a heavily modded install and thus I am wondering how much performance is traded against more beauty?

Poodmund · March 1, 2020

1 hour ago, New Horizons said:

What is the best reason to install Restock(Plus)? I am on a heavily modded install and thus I am wondering how much performance is traded against more beauty?

The best reason to install ReStock+ is because you want all the additional parts listed in the OP.

Spoiler

New Engine parts
- KR-1 'Boar' Liquid Fuel Engine (Nertea): A single version of the Twin Boar engine
- KR-10A 'Corgi' Liquid Fuel Engine Cluster (Nertea): A 3.75m upper stage LF/O engine
- LV-303 'Pug' Liquid Fuel Engine (Nertea/Porkjet):
- LV-T15 'Valiant' Liquid Fuel Engine (Nertea/Porkjet):
- Mk-1H 'Torch' Liquid Fuel Engine (Nertea): 0.625m lifter engine
- RK-1 'Trash Panda' Vernier Engine (Nertea): 1.875m radial soyuz-like vernier engine, with Basic, Wide and Bare variants. Disabled if Making History is installed
- RK-107 'Ursa' Liquid Fueled Engine (Nertea): 1.875m booster engine, with 1.875m, 1.875m (boattail), 1.25m, 1.25m (boattail) and compact variants. Disabled if Making History is installed
- RE-137 'Schnauzer' Liquid Fuel Engine AJ10 (Nertea): 1.875m vacuum engine, with 2.5m, 1.875m, 1.25m and compact variants. Disabled if Making History is installed
- RE-I2 'Caravel' Liquid Fuel Engine (Nertea): 1.875m sustainer engine, with 2.5m, 1.875m, 1.25m and compact variants. Disabled if Making History is installed
- LV-N410 'Cherenkov' Atomic Rocket Motor (Nertea): 2.5m atomic engine with 2.5m and compact variants
- TCK-1 'Castor' SRB: Reworked 1.875m SRB that aligns with new stock Pollux. Disabled if Making History is installed
New Fuel Tank parts
- Kerbodyne S3-3600 Nosecone Tank (Nertea): A 3.75m fuelled nosecone
- Kerbodyne S3-1800 Tank (Nertea): A compact size 3.75m tank
- Oscar-C Fuel Tank (Nertea): A 2x Oscar-B size tank
- Oscar-D Fuel Tank (Nertea): A 4x Oscar-B size tank
- Oscar-E Fuel Tank (Nertea): A 8x Oscar-B size tank
- Stratus-V Miniature Monopropellant Tank (Nertea): A probe-sized RCS tank. Replaces MH tiny RCS tank if installed
- FL-S1 RCS Fuel Tank (Nertea): 3.75m monopropellant tank
- FL-R4 RCS Fuel Tank (Nertea): 1.875m monopropellant tank. Disabled if Making History is installed
- FL-X1800 Liquid Fuel Tank (Nertea): 1.875m long LFO tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-X900 Liquid Fuel Tank (Nertea): 1.875m medium LFO tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-X440 Liquid Fuel Tank (Nertea): 1.875m short LFO tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-X200 Liquid Fuel Tank (Nertea): 1.875m tiny tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-S1200 Liquid Fuel Tank (Nertea): 1.875m soyuz-style LFO tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-XA1200 Fuel Tank Adapter (Nertea): 1.875m to 2.5m LFO adapter tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-XA600 Fuel Tank Adapter (Nertea): 1.875m to 1.25m LFO long adapter tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-XA160 Fuel Tank Adapter (Nertea): 1.875m to 1.25m LFO adapter tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- FL-XA160-S Fuel Tank Adapter (Nertea): 1.875m to 0.625m LFO adapter tank (White, Black and White, Dark Grey/Orange variants). Disabled if Making History is installed
- Oscar-A Liquid Fuel Tank (Nertea): 0.625m half Oscar-B tank (White and Metallic variants)
- PRBE-9 Liquid Fuel Tank (Nertea): 0.625m exposed probe-style tank (long)
- PRBE-4 Liquid Fuel Tank (Nertea): 0.625m exposed probe-style tank
- Oscar-O Hemispherical Liquid Fuel Tank (Nertea): 0.625m hemispherical fuel tank (White and Metallic variants)
- FL-T100-R Hemispherical Liquid Fuel Tank (Nertea): 1.25m hemispherical fuel tank (White, Dark, Dark Grey/Orange and Metallic variants)
- FL-TX220-R Hemispherical Liquid Fuel Tank (Nertea): 1.875m hemispherical fuel tank (White, Dark Grey/Orange and Metallic variants)
- Rockomax X-200-R Hemispherical Liquid Fuel Tank (Nertea): 2.5m hemispherical fuel tank (White, Orange and Metallic variants)
- Kerbodyne S3-1800R Hemispherical Liquid Fuel Tank (Nertea): 3.75m hemispherical fuel tank (White and Orange variants)
New Aerodynamic parts
- Protective Rocket Nose Mk18 (Nertea): 1.875m nosecone
New Thermal parts
- Heat Shield (1.875m) (Nertea): 1.875m heat shield (Classic, Unpainted, Black variants)
New Resource parts
- Jumbo Holding Tank (Andrew Cassidy): 3.75m ore tank
- Medium Holding Tank (Andrew Cassidy): 1.875m ore tank
New Command parts
- RC-XL001 Remote Guidance Unit (Nertea): 3.75m RGU
- RC-XS1 Remote Guidance Unit (Nertea): 0.625m drone core
  - RC-M001 Remote Guidance Unit (Nertea): 1.875m drone core
New Coupling parts
- TD-18 Stack Decoupler (Nertea): 1.875m decoupler. Replaces MH decoupler if installed
- TS-18 Stack Separator (Nertea): 1.875m separator. Replaces MH separator if installed
- TT-14 Decoupler (Nertes): Tiny radial decoupler suitable for 0.625m boosters
- Clamp-O-Tron Docking Port 'Grande' (Nertea): 3.75m docking port
- Advanced Grabbing Unit Junior (Andrew Cassidy): 0.625m klaw
- TD-18-T Truss Decoupler (Nertea): 1.875m decoupler suitable for hot staging. Grey and Soviet Grey variants. Disabled if Making History is installed
New Structural parts
- Kerbodyne ADTP-2-3A (Nertea): A hollow version of the fuelled 3.75 to 2.5m adapter
- Kerbodyne SKLE-2-3 (Nertea): A skeletal 3.75 to 2.5m adapter
- FL-XA30 Adapter (Nertea): 1.875m to 2.5m flat adapter (White, Black and White, Dark Grey/Orange and Metallic variants)
- FL-XA15 Adapter (Nertea): 1.25m to 1.875m flat adapter (White, Black and White, Dark Grey/Orange and Metallic variants)
- Modular Girder Segment XXL (Nertea): double length XL Girder (Basic and Insulated variants)
- Modular Girder Segment Hub (Nertea): Girder style 6-way hub
- Modular Girder Small Adapter (Nertea): Girder to 0.625m adapter
New Payload parts
- AE-FF0 Airstream Protective Shell (0.625m) (Nertea): a 0.625m fairing base
- AE-FF1-L Airstream Protective Shell (1.875m) (Nertea): a 1.875m fairing base. Replaces MH 1.875m fairing base if installed
- Service Bay (1.875m) (Nertea): 1.875m service bay (Open, Opaque, Transparent variants)
New Science parts
- SC-9001R Radial Science Jr (Andrew Cassidy): A radial version of the materials bay
- Mystery Goo™ Inline Containment Unit (Andrew Cassidy): An inline version of the goo canister
- Experiment Return Unit (Andrew Cassidy): Small 0.625m to 1.25m conical experiment storage unit
New Electrical parts
- Z-10K Rechargeable Battery Bank (Nertea): 3.75m stack battery
- Z-2500 Rechargeable Battery Bank (Nertea): 1.875m battery bank
- Monopropellant APU (Andrew Cassidy): fuel cell powered by monopropellant
New Communications parts
- HG-20 High Gain Antenna (Andrew Cassidy): A version of the HG-5 with 4 dishes and 4x the range
- Communotron DTS-J1 (Andrew Cassidy): Stack mount equivalent to the DTS-M1, based on Juno's high gain antenna
- Communotron HG-61 (Andrew Cassidy) Stack mount equivalent to the HG-55, based on the Galileo main antenna
New Control parts:
- RV-102 RCS Thruster Block (Nertea): Dual axis RCS block
- RV-103 RCS Thruster Block (Nertea): Triple RCS block
- RV-105-A RCS Thruster Block (Nertea): Quad angled RCS block
- RV-105-XL RCS Thruster Block (Nertea): Five way RCS block
- RC-12 RCS Thruster Block (Nertea): Dual axis RCS block, mini size
- RC-13 RCS Thruster Block (Nertea): Triple RCS block, mini size
- RC-14 RCS Thruster Block (Nertea): Quad RCS block, mini size
- RC-14-A RCS Thruster Block (Nertea): Quad angled RCS block, mini size
- RC-15 RCS Thruster Block (Nertea): Five way RCS block, mini size
- Small Radial Gyroscope (Andrew Cassidy): radial mount gyroscope with a small amount of torque
- Medium Reaction Wheel Assembly (Nertea): 1.875m reaction wheel
New Utility parts
- Pegasus II Mobility Enhancer (Nertea): 2x size static ladder
- Pegasus III Mobility Enhancer (Nertea): 4x size static ladder

New Horizons · March 1, 2020

The part list is impressive. I will test this mod out in a pure stock install. Maybe I will only use the engines - when supported by RF Stockalike.

Maniacal · March 2, 2020

Hey I've noticed that the new RestockPlus 2.5m atomic engine doesn't have any patches for Kerbal Atomics/Cryo Engines. Can we have a patch for that eventually and possibly add it to an appropriate CTT node (if not other restockplus parts that might be better placed in such nodes)? While I hate having non-stock-alike parts I do enjoy having just that bit of extra fuel mechanics.

theJesuit · March 2, 2020

42 minutes ago, Maniacal said:

Hey I've noticed that the new RestockPlus 2.5m atomic engine doesn't have any patches for Kerbal Atomics/Cryo Engines. Can we have a patch for that eventually and possibly add it to an appropriate CTT node (if not other restockplus parts that might be better placed in such nodes)? While I hate having non-stock-alike parts I do enjoy having just that bit of extra fuel mechanics.

I was about to suggest that you ask the Kerbal Atomics author... then it hit me.

Lol. Peace.

Rodger · March 2, 2020

There’s already an issue for that on KA’s GitHub, so Nertea is aware, and he says it will be addressed after the next Restock update

steve_v · March 4, 2020

I'll just leave this here...

Spoiler


--- restock-engine-caravel.cfg.orig     2020-01-12 23:16:46.000000000 +1300
+++ restock-engine-caravel.cfg  2020-03-03 20:45:06.000000000 +1300
@@ -194,7 +194,7 @@
       NODES
       {
         node_stack_top = 0.0, 1.80521, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.46, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.46, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
     VARIANT
@@ -225,7 +225,7 @@
       NODES
       {
         node_stack_top = 0.0,  1.08738, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
     VARIANT
@@ -256,7 +256,7 @@
       NODES
       {
         node_stack_top = 0.0,  1.08738, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
     VARIANT
@@ -288,7 +288,7 @@
       NODES
       {
         node_stack_top = 0.0, 1.08738, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
     VARIANT
@@ -321,7 +321,7 @@
       NODES
       {
         node_stack_top = 0.0, 1.80521, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.46, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.46, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
     VARIANT
@@ -352,7 +352,7 @@
       NODES
       {
         node_stack_top = 0.0,  1.08738, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
     VARIANT
@@ -383,7 +383,7 @@
       NODES
       {
         node_stack_top = 0.0,  1.08738, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
     VARIANT
@@ -415,7 +415,7 @@
       NODES
       {
         node_stack_top = 0.0, 1.08738, 0.0, 0.0, 1.0, 0.0, 2
-        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, 1.0, 0.0, 2
+        node_stack_bottom = 0.0, -1.413, 0.0, 0.0, -1.0, 0.0, 2
       }
     }
   }

Wyzard · March 5, 2020

I noticed that the ReStock+ "disabled if Making History is installed" parts aren't fully disabled when MH is installed — they still appear in the tech tree. For example, both the FL-TX900 (MH) and FL-X900 (RS+) appear in the "Fuel Systems" tech node.

The reason is that ReStockPlus/Patches/MakingHistoryPartHiding.cfg has the line "@TechHidden = True" for those parts, but the "@" operator only modifies an existing attribute; it won't add it if it's not already there. Since the MH parts don't already have TechHidden attributes, that line doesn't do anything.

Changing it to "%TechHidden" — which edits an existing attribute if there is one, but creates a new one if not — fixes the bug.

Poodmund · March 5, 2020

@Wyzard, thanks for the feedback... this issue has actually already been fixed and will be incorporated into the next release: https://github.com/PorktoberRevolution/ReStocked/pull/799

WarriorSabe · March 6, 2020

Is restock plus going to get bigger, and maybe also spaceplane, xenon tanks?

Satellitefanatic · March 6, 2020

Suggestions for restock

3.75m Service bays

A stockalike engine mount (Pretty much custom mammoths)

Optoelectric Nuclear Batteries as more efficient alternative to RTGs (This may belong on NFT)

Nertea · March 6, 2020

11 hours ago, WarriorSabe said:

Is restock plus going to get bigger, and maybe also spaceplane, xenon tanks?

Nah I made some other mod for xenon stuff. Not very popular though.

7 hours ago, Satellitefanatic said:

Suggestions for restock

3.75m Service bays

A stockalike engine mount (Pretty much custom mammoths)

Optoelectric Nuclear Batteries as more efficient alternative to RTGs (This may belong on NFT)

First one is on the list, second one might be filled by the engine plates. Last one is a no...

KeaKaka · March 6, 2020

I am so sorry for being annoying, but is there any rough date for a 1.9.X restock/restock+ update?

WarriorSabe · March 6, 2020

5 hours ago, Nertea said:

Nah I made some other mod for xenon stuff. Not very popular though.

What's it called? I might check it out, since I really would like more options for xenon.

Edited March 6, 2020 by WarriorSabe
Misselected quote

claustro · March 7, 2020

35 minutes ago, WarriorSabe said:

What's it called? I might check it out, since I really would like more options for xenon.

Near Future Propulsion (engines and tanks) and Near Future Construction (truss elements with switchable xenon tanks)

Satellitefanatic · March 7, 2020

@NerteaI forgot that NFT is feature complete

Sorry for the inconvenience

adm-frb · March 7, 2020

Happy Birthday Restock and Restock+ One year on since it's release on 6th March 2019

On a slightly more normal note, I was wondering, if on the procedural fairings we could get a black option, as some Russian fairings are that colour?. Likewise a black option for the KV-Series Reentry Modules would be perfect for when trying to recreate Soyuz spacecraft. (I was having a nosy around Restock's GitHub and noticed the three pods were on the to do list. )

Also, I'm currently working on a Welded Parts Pack in the Add On Development Area, and need a little help. I really want it to use the Restock models and textures, as it currently uses the stock ones. After using Restock and Restock+ for the past year, the those parts just looks kinda crude...

Edited March 7, 2020 by adm-frb

Maniacal · March 8, 2020

Has... anyone else experienced the LH Skiff's engine effects breaking completely when they have CryoEngines 1.1.0 with the included restock extras folder, Making History expansion, and restock 1.0.3 (with restockplus 1.0.3) running in KSP 1.8.1? It has no sound and, graphically speaking, is constantly at full thrust no matter it actual status (on/off/actually providing thrust/just sitting there). This should be true of at least it's tank butt config. I don't see this in issues or in any patch notes and haven found anything when using Skiff as the search term in these two forum topics. I assume I am dumb and broke it somehow, correct?

Nertea · March 10, 2020

On 3/7/2020 at 6:44 PM, Maniacal said:

Has... anyone else experienced the LH Skiff's engine effects breaking completely when they have CryoEngines 1.1.0 with the included restock extras folder, Making History expansion, and restock 1.0.3 (with restockplus 1.0.3) running in KSP 1.8.1? It has no sound and, graphically speaking, is constantly at full thrust no matter it actual status (on/off/actually providing thrust/just sitting there). This should be true of at least it's tank butt config. I don't see this in issues or in any patch notes and haven found anything when using Skiff as the search term in these two forum topics. I assume I am dumb and broke it somehow, correct?

I'll look into it, probably a cryoengines issue .

On 3/6/2020 at 9:17 PM, adm-frb said:

On a slightly more normal note, I was wondering, if on the procedural fairings we could get a black option, as some Russian fairings are that colour?. Likewise a black option for the KV-Series Reentry Modules would be perfect for when trying to recreate Soyuz spacecraft.

Variants are completely up to author discretion - so probably not.

adm-frb · March 10, 2020

8 minutes ago, Nertea said:

I'll look into it, probably a cryoengines issue .

Variants are completely up to author discretion - so probably not.

Wyzard · March 11, 2020

BTW, is it intentional that the ReStock+ "Experiment Return Unit" (the round one) is in the "Start" tech node? It seems strange since the stock "Experiment Storage Unit" (the boxy one) is several tiers above it, in "Basic Science" for 45 science points, and the ERU is pretty much just the ESU with a different shape.

Poodmund · March 11, 2020

6 hours ago, Wyzard said:

BTW, is it intentional that the ReStock+ "Experiment Return Unit" (the round one) is in the "Start" tech node? It seems strange since the stock "Experiment Storage Unit" (the boxy one) is several tiers above it, in "Basic Science" for 45 science points, and the ERU is pretty much just the ESU with a different shape.

Thanks for spotting this, almost definitely an oversight and will be adjusted for the next release.

[1.12.3] Restock - Revamping KSP's art (Feb 25)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation