Jump to content

[1.12.x] NOT RO - Kerbal Construction Time - Unrapid Planned Assembly


linuxgurugamer
 Share

Recommended Posts

a suggestion that I don't know if they have already done: a button to be able to restore the parachutes, that it be done automatically or that the refill button does it.

Edited by jaunco325
Link to comment
Share on other sites

Does anyone know what sort of reasons might cause this?

ZU4gATX.png

This happens as soon as I enter the editor after clicking edit on a recovered craft. This is after I tried uninstalling Scrapyard - with Scrapyard the Edited percentage is always zero.

I build the craft, roll to launchpad, recover to VAB, wait for recovery, click edit, and immediately get the above -  I have to rebuild the whole vessel from almost scratch if I want to refuel it.

Link to comment
Share on other sites

On 3/29/2022 at 9:44 PM, Snoman314 said:

Does anyone know what sort of reasons might cause this?

ZU4gATX.png

This happens as soon as I enter the editor after clicking edit on a recovered craft. This is after I tried uninstalling Scrapyard - with Scrapyard the Edited percentage is always zero.

I build the craft, roll to launchpad, recover to VAB, wait for recovery, click edit, and immediately get the above -  I have to rebuild the whole vessel from almost scratch if I want to refuel it.

I think I've narrowed it down to Tweakscale. Which so many mods are dependant on going without is not really an option.

If anyone else is having the same problem, my new approach is to not worry about re-using parts (because it's no longer possible), and change the KCT settings to increase the build factor. That way I still get benefits from re-using parts I've used before, I just have to rely on the increased production speed, rather than being able to re-use anything.

Link to comment
Share on other sites

10 hours ago, Snoman314 said:

Which so many mods are dependant on going without is not really an option.

Ummm, really?  I play with 230 mods, and none of them depend on Tweakscale.

Not criticizing you, just pointing that that there are very few mods which depend on Tweakscale.  Looking at CKAN, I see the following:

  • Airplane Plus Things
  • All Tweak
  • Interstellar Fuel Switch Core
  • interstellar Technologies
  • KSP Interstellar Extended

 

Link to comment
Share on other sites

Is it possible to remove KCT's override of the Recover button?

I know there's an option to stop it overriding the vanilla Launch button, but I don't see anything (in Settings or actual config files) that might point to stopping it from overriding the Recover button. I'm sure there are use cases for recovering directly to the VAB or the SPH, but I'd prefer to just use the vanilla recovery method (saving a click and making recovery a touch less tedious).

I can mess with Module Manager configs, and I've done part creation, but this type of modding (where it's packaged into a .dll) is a bit beyond me. I can read the code enough to guess that it probably has something to do with the Start() function in KCT_Flight.cs but I wouldn't know how to insert a reference to a config setting that could disable the modded behavior..

Edited by jfjohnny5
Link to comment
Share on other sites

Hi! I have a problem: when I recover a craft to the VAB and then roll it back out, the elettric charge is at zero. Can I follow the same process as a module to modify? I have already found where the value needs to be changed but  it's a resurce and not a module. Any suggestions?

Link to comment
Share on other sites

I'm having an opposite sort of problem. I'll short fuel a rocket and save the design as such in the VAB. I then have KCT build it, and when it rolls out to the pad, the tanks get topped off - really throwing off my launch TWR plans.

Link to comment
Share on other sites

On 3/30/2022 at 11:37 PM, linuxgurugamer said:

Ummm, really?  I play with 230 mods, and none of them depend on Tweakscale.

 

I'm only running with ~180, but I'm having huge issues with performance, startup times and things which stop working.

I assume yours is running nicely. May I ask for a list of the mods you are using, @linuxgurugamer?

Edited by FasterThanFlourite
Link to comment
Share on other sites

  • 2 weeks later...

Hi, I needs some help fixing this error I keep getting from KCT.

I'm having this reicuring problem with my carrere save. 

Here is my mods list:

Spoiler

AtmosphereAutopilot (Fly-By-Wire) (AtmosphereAutopilot v1.5.18)
B9 Part Switch (B9PartSwitch v2.20.0)
Better Load Save Game Renewed (BetterLoadSaveGame 2.5.3.4)
Better SR Bs (BetterSRBs 1.2.6)
BetterTimeWarpContinued (BetterTimeWarpCont 2.3.13)
Breaking Ground (BreakingGround-DLC 1.7.1)
ClickThrough Blocker (ClickThroughBlocker 1:0.1.10.17)
CommNet Antennas Extension (CommNetAntennasExtension 2.1.7)
Community Resource Pack (CommunityResourcePack 1.4.2)
Community Tech Tree (CommunityTechTree 1:3.4.4)
Community Terrain Texture Pack (CommunityTerrainTexturePack 1:1.0.4)
Contract Configurator (ContractConfigurator 1.30.5)
Crowd Sourced Science (CrowdSourcedScience v6.0)
Cryo Tanks (CryoTanks 1.6.4)
Cryo Tanks Core (CryoTanks-Core 1.6.4)
Cryogenic Engines (CryoEngines 1:2.0.6)
Cryogenic Engines - Near Future Aeronautics (CryoEngines-NFAero 2.0.6)
Custom Barn Kit (CustomBarnKit 1.1.22.0)
Deployable Engines Plugin (DeployableEngines 1.3.1)
Distant Object Enhancement Continued (DistantObject v2.0.3.1)
Distant Object Enhancement Continued default config (DistantObject-default v2.0.3.1)
Dynamic Battery Storage (DynamicBatteryStorage 2:2.2.5.0)
Easy Vessel Switch (EVS) (EasyVesselSwitch 2.3)
Environmental Visual Enhancements Redux (EnvironmentalVisualEnhancements 3:1.11.6.1)
Far Future Technologies (FarFutureTechnologies 1.2.0)
Ferram Aerospace Research Continued (FerramAerospaceResearchContinued 3:0.16.0.5)
Harmony 2 (Harmony2 2.0.4.0)
Heat Control (HeatControl 0.6.1)
Kerbal Actuators (KerbalActuators v1.8.4)
Kerbal Atomics (KerbalAtomics 1:1.3.3)
Kerbal Changelog (KerbalChangelog v1.4.2)
Kerbal Engineer Redux (KerbalEngineerRedux 1.1.9.0)
Kerbalism (Kerbalism 3.14)
Kerbalism - Default Config (Kerbalism-Config-Default 3.14)
Kopernicus Planetary System Modifier (Kopernicus 2:release-1.12.1-87)
Making History (MakingHistory-DLC 1.12.1)
ModularFlightIntegrator (ModularFlightIntegrator 1.2.10.0)
Module Manager (ModuleManager 4.2.1)
Near Future Aeronautics (NearFutureAeronautics 2.1.1)
Near Future Electrical (NearFutureElectrical 1.2.3)
Near Future Electrical - Decaying RTGs (NearFutureElectrical-DecayingRTGs 1.2.3)
Near Future Electrical Core (NearFutureElectrical-Core 1.2.3)
Near Future Exploration (NearFutureExploration 1.1.2)
Near Future IVA Props (NearFutureProps 1:0.7.1)
Near Future Launch Vehicles (NearFutureLaunchVehicles 2.2.0)
Near Future Propulsion (NearFuturePropulsion 1.3.5)
Near Future Solar (NearFutureSolar 1.3.2)
Near Future Solar Core (NearFutureSolar-Core 1.3.2)
Near Future Spacecraft (NearFutureSpacecraft 1.4.3)
Outer Planets Mod (OuterPlanetsMod 2:2.2.10)
Planes With Purposes (ContractConfigurator-PlanesWithPurposes 1.5)
PlanetInfoPlus (PlanetInfoPlus 1.4)
PlanetShine (PlanetShine 0.2.6.6)
PlanetShine - Default configuration (PlanetShine-Config-Default 0.2.6.6)
Procedural Fairings (ProceduralFairings 1:v6.2)
Real Plume (RealPlume 2:v13.3.2)
Real Plume - Stock Configs (RealPlume-StockConfigs v4.0.8)
Realistic Atmospheres (RealisticAtmospheres 1.3.2)
RemoteTech Redev Antennas (RemoteTechRedevAntennas 0.1.1)
ReStock (ReStock 1.4.3)
ReStock+ (ReStockPlus 1.4.3)
Scatterer (Scatterer 3:v0.0831)
Scatterer Default Config (Scatterer-config 3:v0.0831)
Scatterer Sunflare (Scatterer-sunflare 3:v0.0831)
SmokeScreen - Extended FX Plugin (SmokeScreen 2.8.14.0)
Space Dust (SpaceDust 0.4.3)
SpaceTux Library (SpaceTuxLibrary 0.0.8.4)
SRB Waterfall Effects (SWE) (SRBWaterfallEffects 1.3)
Stockalike Station Parts Expansion Redux (StationPartsExpansionRedux 2.0.6)
System Heat (SystemHeat 0.5.6)
System Heat - Nuclear Engine Configuration (SystemHeat-FissionEngines 0.5.6)
System Heat - Nuclear Reactor Configuration (SystemHeat-FissionReactors 0.5.6)
System Heat - Resource Converter Configuration (SystemHeat-Converters 0.5.6)
System Heat - Resource Harvester Configuration (SystemHeat-Harvesters 0.5.6)
Toolbar Controller (ToolbarController 1:0.1.9.6)
Trajectories (Trajectories v2.4.3)
Waterfall - Restock (WaterfallRestock 0.2.3)
Waterfall Core (Waterfall 0.8.1)
Waypoint Manager (WaypointManager 2.8.3.3)
Zero MiniAVC (ZeroMiniAVC 1:1.1.2.4)

Here is my Player.log file:

https://drive.google.com/file/d/1s6YUG4y6Oew45_1nPJRkkyAla9Z3oKJv/view?usp=sharing


When I load a vessel, like a rover for example, everything seems to be normal except that the trajectories window is stuck open and the trajectoris target indicator is stuck on. 

Image: 

 

https://imgur.com/dXsmTQ3


When I return to the space center I get this message, which I also get if I quit to main menue and load the save:

 

Image:

https://imgur.com/TXd6H79

The debug consule is also being spammed with argument null exceptions if that is usefull infomation. When this happens the frame rate drops to single digets and I am unable to do anything except close ksp.

I am only expirencing this problem on the latest save of my carreer mode save, my next latest save doesn't have this problem.

Save from april 16th: https://drive.google.com/file/d/1KFSow5YDUTwE0CUUqY-6rCQJZYgZv4N1/view?usp=sharing

save from april 15th: https://drive.google.com/file/d/1NQ7ym-QwEDcdzvgu9Z_ksD8r1d5oWiBd/view?usp=sharing

I would include steps to reproduce this problem on a fresh save but I can't because don't what is causing the problem in the first place.

I need help figuring out what is causing this problem.

Link to comment
Share on other sites

20 hours ago, Ozzy.R said:

Hi, I needs some help fixing this error I keep getting from KCT.

I'm having this reicuring problem with my carrere save. 

Here is my mods list:

  Reveal hidden contents

AtmosphereAutopilot (Fly-By-Wire) (AtmosphereAutopilot v1.5.18)
B9 Part Switch (B9PartSwitch v2.20.0)
Better Load Save Game Renewed (BetterLoadSaveGame 2.5.3.4)
Better SR Bs (BetterSRBs 1.2.6)
BetterTimeWarpContinued (BetterTimeWarpCont 2.3.13)
Breaking Ground (BreakingGround-DLC 1.7.1)
ClickThrough Blocker (ClickThroughBlocker 1:0.1.10.17)
CommNet Antennas Extension (CommNetAntennasExtension 2.1.7)
Community Resource Pack (CommunityResourcePack 1.4.2)
Community Tech Tree (CommunityTechTree 1:3.4.4)
Community Terrain Texture Pack (CommunityTerrainTexturePack 1:1.0.4)
Contract Configurator (ContractConfigurator 1.30.5)
Crowd Sourced Science (CrowdSourcedScience v6.0)
Cryo Tanks (CryoTanks 1.6.4)
Cryo Tanks Core (CryoTanks-Core 1.6.4)
Cryogenic Engines (CryoEngines 1:2.0.6)
Cryogenic Engines - Near Future Aeronautics (CryoEngines-NFAero 2.0.6)
Custom Barn Kit (CustomBarnKit 1.1.22.0)
Deployable Engines Plugin (DeployableEngines 1.3.1)
Distant Object Enhancement Continued (DistantObject v2.0.3.1)
Distant Object Enhancement Continued default config (DistantObject-default v2.0.3.1)
Dynamic Battery Storage (DynamicBatteryStorage 2:2.2.5.0)
Easy Vessel Switch (EVS) (EasyVesselSwitch 2.3)
Environmental Visual Enhancements Redux (EnvironmentalVisualEnhancements 3:1.11.6.1)
Far Future Technologies (FarFutureTechnologies 1.2.0)
Ferram Aerospace Research Continued (FerramAerospaceResearchContinued 3:0.16.0.5)
Harmony 2 (Harmony2 2.0.4.0)
Heat Control (HeatControl 0.6.1)
Kerbal Actuators (KerbalActuators v1.8.4)
Kerbal Atomics (KerbalAtomics 1:1.3.3)
Kerbal Changelog (KerbalChangelog v1.4.2)
Kerbal Engineer Redux (KerbalEngineerRedux 1.1.9.0)
Kerbalism (Kerbalism 3.14)
Kerbalism - Default Config (Kerbalism-Config-Default 3.14)
Kopernicus Planetary System Modifier (Kopernicus 2:release-1.12.1-87)
Making History (MakingHistory-DLC 1.12.1)
ModularFlightIntegrator (ModularFlightIntegrator 1.2.10.0)
Module Manager (ModuleManager 4.2.1)
Near Future Aeronautics (NearFutureAeronautics 2.1.1)
Near Future Electrical (NearFutureElectrical 1.2.3)
Near Future Electrical - Decaying RTGs (NearFutureElectrical-DecayingRTGs 1.2.3)
Near Future Electrical Core (NearFutureElectrical-Core 1.2.3)
Near Future Exploration (NearFutureExploration 1.1.2)
Near Future IVA Props (NearFutureProps 1:0.7.1)
Near Future Launch Vehicles (NearFutureLaunchVehicles 2.2.0)
Near Future Propulsion (NearFuturePropulsion 1.3.5)
Near Future Solar (NearFutureSolar 1.3.2)
Near Future Solar Core (NearFutureSolar-Core 1.3.2)
Near Future Spacecraft (NearFutureSpacecraft 1.4.3)
Outer Planets Mod (OuterPlanetsMod 2:2.2.10)
Planes With Purposes (ContractConfigurator-PlanesWithPurposes 1.5)
PlanetInfoPlus (PlanetInfoPlus 1.4)
PlanetShine (PlanetShine 0.2.6.6)
PlanetShine - Default configuration (PlanetShine-Config-Default 0.2.6.6)
Procedural Fairings (ProceduralFairings 1:v6.2)
Real Plume (RealPlume 2:v13.3.2)
Real Plume - Stock Configs (RealPlume-StockConfigs v4.0.8)
Realistic Atmospheres (RealisticAtmospheres 1.3.2)
RemoteTech Redev Antennas (RemoteTechRedevAntennas 0.1.1)
ReStock (ReStock 1.4.3)
ReStock+ (ReStockPlus 1.4.3)
Scatterer (Scatterer 3:v0.0831)
Scatterer Default Config (Scatterer-config 3:v0.0831)
Scatterer Sunflare (Scatterer-sunflare 3:v0.0831)
SmokeScreen - Extended FX Plugin (SmokeScreen 2.8.14.0)
Space Dust (SpaceDust 0.4.3)
SpaceTux Library (SpaceTuxLibrary 0.0.8.4)
SRB Waterfall Effects (SWE) (SRBWaterfallEffects 1.3)
Stockalike Station Parts Expansion Redux (StationPartsExpansionRedux 2.0.6)
System Heat (SystemHeat 0.5.6)
System Heat - Nuclear Engine Configuration (SystemHeat-FissionEngines 0.5.6)
System Heat - Nuclear Reactor Configuration (SystemHeat-FissionReactors 0.5.6)
System Heat - Resource Converter Configuration (SystemHeat-Converters 0.5.6)
System Heat - Resource Harvester Configuration (SystemHeat-Harvesters 0.5.6)
Toolbar Controller (ToolbarController 1:0.1.9.6)
Trajectories (Trajectories v2.4.3)
Waterfall - Restock (WaterfallRestock 0.2.3)
Waterfall Core (Waterfall 0.8.1)
Waypoint Manager (WaypointManager 2.8.3.3)
Zero MiniAVC (ZeroMiniAVC 1:1.1.2.4)

Here is my Player.log file:

https://drive.google.com/file/d/1s6YUG4y6Oew45_1nPJRkkyAla9Z3oKJv/view?usp=sharing


When I load a vessel, like a rover for example, everything seems to be normal except that the trajectories window is stuck open and the trajectoris target indicator is stuck on. 

Image: 

 

https://imgur.com/dXsmTQ3


When I return to the space center I get this message, which I also get if I quit to main menue and load the save:

 

Image:

https://imgur.com/TXd6H79

The debug consule is also being spammed with argument null exceptions if that is usefull infomation. When this happens the frame rate drops to single digets and I am unable to do anything except close ksp.

I am only expirencing this problem on the latest save of my carreer mode save, my next latest save doesn't have this problem.

Save from april 16th: https://drive.google.com/file/d/1KFSow5YDUTwE0CUUqY-6rCQJZYgZv4N1/view?usp=sharing

save from april 15th: https://drive.google.com/file/d/1NQ7ym-QwEDcdzvgu9Z_ksD8r1d5oWiBd/view?usp=sharing

I would include steps to reproduce this problem on a fresh save but I can't because don't what is causing the problem in the first place.

I need help figuring out what is causing this problem.

I looked at your log file, you have errors from a multitude of mods.  The majority seem to be from FAR, I suggest you contact the FAR thread with this same info

Link to comment
Share on other sites

10 hours ago, linuxgurugamer said:

I looked at your log file, you have errors from a multitude of mods.  The majority seem to be from FAR, I suggest you contact the FAR thread with this same info

Alright, thanks for the speedy reply. I'll take my issue over to the FAR thread.

 

 

Link to comment
Share on other sites

On 4/17/2022 at 12:48 PM, Ozzy.R said:

Hi, I needs some help fixing this error I keep getting from KCT.

I'm having this reicuring problem with my carrere save. 

Here is my mods list:

  Reveal hidden contents

AtmosphereAutopilot (Fly-By-Wire) (AtmosphereAutopilot v1.5.18)
B9 Part Switch (B9PartSwitch v2.20.0)
Better Load Save Game Renewed (BetterLoadSaveGame 2.5.3.4)
Better SR Bs (BetterSRBs 1.2.6)
BetterTimeWarpContinued (BetterTimeWarpCont 2.3.13)
Breaking Ground (BreakingGround-DLC 1.7.1)
ClickThrough Blocker (ClickThroughBlocker 1:0.1.10.17)
CommNet Antennas Extension (CommNetAntennasExtension 2.1.7)
Community Resource Pack (CommunityResourcePack 1.4.2)
Community Tech Tree (CommunityTechTree 1:3.4.4)
Community Terrain Texture Pack (CommunityTerrainTexturePack 1:1.0.4)
Contract Configurator (ContractConfigurator 1.30.5)
Crowd Sourced Science (CrowdSourcedScience v6.0)
Cryo Tanks (CryoTanks 1.6.4)
Cryo Tanks Core (CryoTanks-Core 1.6.4)
Cryogenic Engines (CryoEngines 1:2.0.6)
Cryogenic Engines - Near Future Aeronautics (CryoEngines-NFAero 2.0.6)
Custom Barn Kit (CustomBarnKit 1.1.22.0)
Deployable Engines Plugin (DeployableEngines 1.3.1)
Distant Object Enhancement Continued (DistantObject v2.0.3.1)
Distant Object Enhancement Continued default config (DistantObject-default v2.0.3.1)
Dynamic Battery Storage (DynamicBatteryStorage 2:2.2.5.0)
Easy Vessel Switch (EVS) (EasyVesselSwitch 2.3)
Environmental Visual Enhancements Redux (EnvironmentalVisualEnhancements 3:1.11.6.1)
Far Future Technologies (FarFutureTechnologies 1.2.0)
Ferram Aerospace Research Continued (FerramAerospaceResearchContinued 3:0.16.0.5)
Harmony 2 (Harmony2 2.0.4.0)
Heat Control (HeatControl 0.6.1)
Kerbal Actuators (KerbalActuators v1.8.4)
Kerbal Atomics (KerbalAtomics 1:1.3.3)
Kerbal Changelog (KerbalChangelog v1.4.2)
Kerbal Engineer Redux (KerbalEngineerRedux 1.1.9.0)
Kerbalism (Kerbalism 3.14)
Kerbalism - Default Config (Kerbalism-Config-Default 3.14)
Kopernicus Planetary System Modifier (Kopernicus 2:release-1.12.1-87)
Making History (MakingHistory-DLC 1.12.1)
ModularFlightIntegrator (ModularFlightIntegrator 1.2.10.0)
Module Manager (ModuleManager 4.2.1)
Near Future Aeronautics (NearFutureAeronautics 2.1.1)
Near Future Electrical (NearFutureElectrical 1.2.3)
Near Future Electrical - Decaying RTGs (NearFutureElectrical-DecayingRTGs 1.2.3)
Near Future Electrical Core (NearFutureElectrical-Core 1.2.3)
Near Future Exploration (NearFutureExploration 1.1.2)
Near Future IVA Props (NearFutureProps 1:0.7.1)
Near Future Launch Vehicles (NearFutureLaunchVehicles 2.2.0)
Near Future Propulsion (NearFuturePropulsion 1.3.5)
Near Future Solar (NearFutureSolar 1.3.2)
Near Future Solar Core (NearFutureSolar-Core 1.3.2)
Near Future Spacecraft (NearFutureSpacecraft 1.4.3)
Outer Planets Mod (OuterPlanetsMod 2:2.2.10)
Planes With Purposes (ContractConfigurator-PlanesWithPurposes 1.5)
PlanetInfoPlus (PlanetInfoPlus 1.4)
PlanetShine (PlanetShine 0.2.6.6)
PlanetShine - Default configuration (PlanetShine-Config-Default 0.2.6.6)
Procedural Fairings (ProceduralFairings 1:v6.2)
Real Plume (RealPlume 2:v13.3.2)
Real Plume - Stock Configs (RealPlume-StockConfigs v4.0.8)
Realistic Atmospheres (RealisticAtmospheres 1.3.2)
RemoteTech Redev Antennas (RemoteTechRedevAntennas 0.1.1)
ReStock (ReStock 1.4.3)
ReStock+ (ReStockPlus 1.4.3)
Scatterer (Scatterer 3:v0.0831)
Scatterer Default Config (Scatterer-config 3:v0.0831)
Scatterer Sunflare (Scatterer-sunflare 3:v0.0831)
SmokeScreen - Extended FX Plugin (SmokeScreen 2.8.14.0)
Space Dust (SpaceDust 0.4.3)
SpaceTux Library (SpaceTuxLibrary 0.0.8.4)
SRB Waterfall Effects (SWE) (SRBWaterfallEffects 1.3)
Stockalike Station Parts Expansion Redux (StationPartsExpansionRedux 2.0.6)
System Heat (SystemHeat 0.5.6)
System Heat - Nuclear Engine Configuration (SystemHeat-FissionEngines 0.5.6)
System Heat - Nuclear Reactor Configuration (SystemHeat-FissionReactors 0.5.6)
System Heat - Resource Converter Configuration (SystemHeat-Converters 0.5.6)
System Heat - Resource Harvester Configuration (SystemHeat-Harvesters 0.5.6)
Toolbar Controller (ToolbarController 1:0.1.9.6)
Trajectories (Trajectories v2.4.3)
Waterfall - Restock (WaterfallRestock 0.2.3)
Waterfall Core (Waterfall 0.8.1)
Waypoint Manager (WaypointManager 2.8.3.3)
Zero MiniAVC (ZeroMiniAVC 1:1.1.2.4)

Here is my Player.log file:

https://drive.google.com/file/d/1s6YUG4y6Oew45_1nPJRkkyAla9Z3oKJv/view?usp=sharing


When I load a vessel, like a rover for example, everything seems to be normal except that the trajectories window is stuck open and the trajectoris target indicator is stuck on. 

Image: 

 

https://imgur.com/dXsmTQ3


When I return to the space center I get this message, which I also get if I quit to main menue and load the save:

 

Image:

https://imgur.com/TXd6H79

The debug consule is also being spammed with argument null exceptions if that is usefull infomation. When this happens the frame rate drops to single digets and I am unable to do anything except close ksp.

I am only expirencing this problem on the latest save of my carreer mode save, my next latest save doesn't have this problem.

Save from april 16th: https://drive.google.com/file/d/1KFSow5YDUTwE0CUUqY-6rCQJZYgZv4N1/view?usp=sharing

save from april 15th: https://drive.google.com/file/d/1NQ7ym-QwEDcdzvgu9Z_ksD8r1d5oWiBd/view?usp=sharing

I would include steps to reproduce this problem on a fresh save but I can't because don't what is causing the problem in the first place.

I need help figuring out what is causing this problem.

Follow up on my bug report. I haven't gotten any word from anyone on the FAR thread but I did try removing FAR from my GameData folder to see if that fixed the problem. It did fix the lag and the debug consule spam but the main problem still persists.

Image

Cropped image for better reading

The mian problem I'm experiencing is that he game brakes after I return to the space center from a vessel. Like for instance I'm not able to enter most of the buildings at the space center and the none of the exit buttons work.

Here's the log file: https://drive.google.com/file/d/1s6YUG4y6Oew45_1nPJRkkyAla9Z3oKJv/view?usp=sharing

 

 

Link to comment
Share on other sites

If I am in Space Center view and have the KCT window open (symbol with red clock arms), then go into R&D view and then back to the Space Center, the KCT window has closed (white arms) and I need to open it up again. Is this intended behavior, @linuxgurugamer?

If this is normal, would it be possible to change it so that KCT always stays open, unless one specifically clicks the KCT button?

Link to comment
Share on other sites

New release, 1.4.11.3

  • Fixed three lines where GUIStyle was being allocated during an OnGUI call multiple times, leading to memory leaks
  • Thanks to github user @monstrim for this:
    • Technodes now check for AnyToUnlock for progress/cancelling
  • Thanks to github user @Horathio for this:
    • Fixed typo in variable assignment of ParseBuildRateFormula()
       
Link to comment
Share on other sites

Having a weird problem with a particular save of mine; KCT just stopped working one day and the icon disappeared from my toolbar. It's still there on every other savegame I have and I can use it like normal in them, but for my main file it's nowhere to be seen. Has anyone ever had a similar problem?

I can supply a .log and other data if necessary but I question how useful that would be since there's not a specific 'event' I can point to in the log as the issue here. I have the latest version of KCT and its dependencies as available on github.

Link to comment
Share on other sites

22 hours ago, pTrevTrevs said:

Having a weird problem with a particular save of mine; KCT just stopped working one day and the icon disappeared from my toolbar. It's still there on every other savegame I have and I can use it like normal in them, but for my main file it's nowhere to be seen. Has anyone ever had a similar problem?

I can supply a .log and other data if necessary but I question how useful that would be since there's not a specific 'event' I can point to in the log as the issue here. I have the latest version of KCT and its dependencies as available on github.

Always provide a log file, it just wastes time otherwise.

 

Link to comment
Share on other sites

7 hours ago, linuxgurugamer said:

Always provide a log file, it just wastes time otherwise.

 

Well, no matter, I 'fixed' the issue by copying in another copy of the KCT_Settings file from another save. After looking more closely myself I found out that the original one for the offending save had a huge chunk of code missing, although I'll swear before God that I've never even opened the file before.

Link to comment
Share on other sites

I'm having an issue with the latest KCT version. After updating, the KCT dialog window doesn't show up in KSC and I get a full log of KeyNotFoundException. I suspect it may be due to a conflict with HETTN (which was also recently updated). The log: https://file.io/2De1zrJve4YZ

Link to comment
Share on other sites

1 hour ago, garwel said:

I'm having an issue with the latest KCT version. After updating, the KCT dialog window doesn't show up in KSC and I get a full log of KeyNotFoundException. I suspect it may be due to a conflict with HETTN (which was also recently updated). The log: https://file.io/2De1zrJve4YZ

Did you try to remove HETTN and see what happens?

Link to comment
Share on other sites

Having another problem (fortunately it's one that I've seen others experience before) where the KCT window breaks down and appears as this immovable bar on the right side of my screen:

csl6cKB.png

I've seen this happen both after leaving the VAB and adding something to the build list. It seems like it's a problem with this particular save since I can reverse this by rolling back to an earlier persistent file. Unfortunately, the problem pops up again shortly after loading an earlier save, usually from the causes mentioned above.

Quote

Here's my current modlist; aside from updates virtually nothing has changed from before the problem first occurred.

35BciMW.png

 

And here is my .log file: https://drive.google.com/file/d/16eHTgPaf9F-G4YzZ-a6Oml1KyjNcl3f1/view?usp=sharing

Link to comment
Share on other sites

@pTrevTrevs Your log is showing a lot of exceptions from KerbalConstructionTime.KCT_GUI.DrawBuildListWindow. That looks like something that happened to me a couple of years ago when the build queue in one of my .sfs files got corrupted somehow.

Depending on how valuable you consider your current build queue/warehoused vessels you can try either a quick (nuke the queue) or more methodical (remove one vessel at a time and test) method to fix this.

Load KSP and go to KSC screen. From pause menu make a named save. Make a copy of the save then open that save in a good text editor then find the section:

SCENARIO
{
	name = KerbalConstructionTimeData
	...
}

Inside this section there are lists of KCTVessel nodes representing the individual vessels under construction/stored in the warehouses.

Carefully, delete the KCTVessel nodes (all at once for the nuke solution attempt) or individually. Save the file. Reload the save into KSP and see if the problem is fixed. If trying the bit-by-bit approach may need to edit and load multiple times until you find and remove the corrupted KCTVessel node.

Thinking about this while typing, it could also be that one of your mods has updated since a vessel was added to the queues/warehouses and a part that was on the vessel is no longer present in the mod. Maybe that would also break the queue handling?

Anyway. Hope this helps.

Link to comment
Share on other sites

18 minutes ago, Aelfhe1m said:

@pTrevTrevs Your log is showing a lot of exceptions from KerbalConstructionTime.KCT_GUI.DrawBuildListWindow. That looks like something that happened to me a couple of years ago when the build queue in one of my .sfs files got corrupted somehow.

Depending on how valuable you consider your current build queue/warehoused vessels you can try either a quick (nuke the queue) or more methodical (remove one vessel at a time and test) method to fix this.

Load KSP and go to KSC screen. From pause menu make a named save. Make a copy of the save then open that save in a good text editor then find the section:

SCENARIO
{
	name = KerbalConstructionTimeData
	...
}

Inside this section there are lists of KCTVessel nodes representing the individual vessels under construction/stored in the warehouses.

Carefully, delete the KCTVessel nodes (all at once for the nuke solution attempt) or individually. Save the file. Reload the save into KSP and see if the problem is fixed. If trying the bit-by-bit approach may need to edit and load multiple times until you find and remove the corrupted KCTVessel node.

Thinking about this while typing, it could also be that one of your mods has updated since a vessel was added to the queues/warehouses and a part that was on the vessel is no longer present in the mod. Maybe that would also break the queue handling?

Anyway. Hope this helps.

Thanks a ton, I'll try this out!

Link to comment
Share on other sites

On 5/17/2022 at 7:40 PM, Aelfhe1m said:

@pTrevTrevs Your log is showing a lot of exceptions from KerbalConstructionTime.KCT_GUI.DrawBuildListWindow. That looks like something that happened to me a couple of years ago when the build queue in one of my .sfs files got corrupted somehow.

Depending on how valuable you consider your current build queue/warehoused vessels you can try either a quick (nuke the queue) or more methodical (remove one vessel at a time and test) method to fix this.

Load KSP and go to KSC screen. From pause menu make a named save. Make a copy of the save then open that save in a good text editor then find the section:

SCENARIO
{
	name = KerbalConstructionTimeData
	...
}

Inside this section there are lists of KCTVessel nodes representing the individual vessels under construction/stored in the warehouses.

Carefully, delete the KCTVessel nodes (all at once for the nuke solution attempt) or individually. Save the file. Reload the save into KSP and see if the problem is fixed. If trying the bit-by-bit approach may need to edit and load multiple times until you find and remove the corrupted KCTVessel node.

Thinking about this while typing, it could also be that one of your mods has updated since a vessel was added to the queues/warehouses and a part that was on the vessel is no longer present in the mod. Maybe that would also break the queue handling?

Anyway. Hope this helps.

Okay so, I tried this, and it worked! For all of five minutes, that is.

I pruned out the most recently added ship from the build list, and upon loading the game the KCT window worked normally, but then I went to fly a certain ship (one that was already in flight prior to all this) and the window broke again within minutes. The console kept registering this single error message:

6cdvska.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...