Jump to content

Infernal Robotics - Next


Recommended Posts

On 3/13/2021 at 10:34 AM, realjuliusPGKC said:

how do i use the parts to dock something to my craft with it attached i cant figure out how like docking a resupply mission to the ISS but in KSP

Are you asking about using some kind of arm to dock a craft? Soyuz -> ISS for example, you would need the arm in space, depends how you'd like to do it. Say your arm is connected to the station, with a grapple node on the end to grab modules. You can connect multiple nodes across crafts, called Multi-Docking when referring to docking ports. Knowing this, you can simply use the arm to maneuver into docking position, and either dock it before releasing the grapple, or release it with 0 velocity near the port and push the station forwards to dock.

Link to post
Share on other sites
  • 2 weeks later...

Is there a way to stop IR from creating its own part category when Breaking Ground is installed, since it already has a Robotics category? Appling @category = Robotics doesn't seem to stop the IR DLL from swooping in and re-categorizing everything...

Link to post
Share on other sites
  • 4 weeks later...
3 hours ago, KallangoVerde said:

Is the InnerLock mod required if I want to reproduce the Canadarm 2 worm movement across the ISS?

No. You need double docking head on candarm, though. I don't know if "magnet" docking port still works or not, but you can use claw or ordinary docking ports too. You will need probe, some batteries and maybe power source in middle section of Candarm to replicate funcionality within game. Threre is some old video about it how someone acomplished it several KSP versions ago. I belive that trick used on that video still works. Can't recall author name that might help you to search for more info.

Link to post
Share on other sites
16 horas atrás, kcs123 disse:

Não. Você precisa de uma cabeça de encaixe dupla no candarm, no entanto. Não sei se a porta de dock "magnética" ainda funciona ou não, mas você também pode usar portas de garra ou comuns. Você precisará de uma sonda, algumas baterias e talvez uma fonte de energia na seção intermediária do Candarm para replicar a funcionalidade dentro do jogo. Há um vídeo antigo sobre como alguém conseguiu isso várias versões do KSP atrás. Eu acredito que o truque usado naquele vídeo ainda funciona. Não consigo me lembrar do nome do autor que pode ajudá-lo a pesquisar mais informações.

The center of the canadarm would be a probe and this would be the root piece from which it would extend, for both sides, the construction of the arm ... like an "arm ship"? That's it?

Google didn't translate well this time and that's what I understood ...

Link to post
Share on other sites
26 minutes ago, KallangoVerde said:

The center of the canadarm would be a probe and this would be the root piece from which it would extend, for both sides, the construction of the arm ... like an "arm ship"? That's it?

Yes, something like that. You need probe in the arm due to docking/undocking on both sides. Without it you may lose control over candarm. And you need electicity for both, probe and hinges and/or other IR parts. There was a bug with IR and this kind of mechanism, when you dock/undock candarm, you may revert orientation on some parts. What you have assigned as "left" rotation, may become "right" or something similar.

Exception is, that such candarm does not need engines, fuel, etc. Like regular craft. But, docking/undocking and merging two crafts in KSP was always a bit buggy, even without IR.

Link to post
Share on other sites
45 minutes ago, kcs123 said:

Sim algo assim. Você precisa de uma sonda no braço devido ao encaixe / desencaixe em ambos os lados. Sem ele, você pode perder o controle sobre o candarme. E você precisa de eletricidade para ambos, sonda e dobradiças e / ou outras peças de infravermelho. Havia um bug com IR e este tipo de mecanismo, quando você encaixar / desencaixar o candarm, você pode reverter a orientação em algumas partes. O que você atribuiu como rotação "esquerda" pode se tornar "direita" ou algo semelhante.

A exceção é que tal vela não precisa de motores, combustível, etc. Como embarcações normais. Mas, encaixar / desencaixar e mesclar duas embarcações no KSP sempre foi um pouco problemático, mesmo sem IR.

It's true ... my dream is to see a canadarm Sotck in the original game that can move as easily as the ISS. Setting up a station without a robotic arm is not that cool ... I hope KSP 2 can have that.

I have the game's robotic DLC ... maybe that can help. Thank you for the tips!

Link to post
Share on other sites
10 hours ago, KallangoVerde said:

It's true ... my dream is to see a canadarm Sotck in the original game that can move as easily as the ISS. Setting up a station without a robotic arm is not that cool ... I hope KSP 2 can have that.

I have the game's robotic DLC ... maybe that can help. Thank you for the tips!

I understand you mentioned stock, however, there is a wicked good station arm that comes with a servo programmer so you can set nice clean movements in space for docking parts. For what its worth, you definitely can build a Canadarm with robotics. You're going to need to go through some testing on your own to tune the damping, timings, etc. Default settings for robotics are a little wonky. I have no doubt you can use KAL controllers to program a good docking arm.

Link to post
Share on other sites
  • 2 weeks later...
1 hour ago, adriangm44 said:

How can I build a sun tracking robotic part?

I think you would need to do some math and time them. I can't think of a way to detect sunlight or anything like that.

Link to post
Share on other sites

Hello!

I love your mod. Great work! I downloaded and installed a few days ago and have been tinkering with it. I am running 1.10 with BDB and have run into a semi-weird issue. 

tg0EeEP.jpg 

Does anyone have an idea for the reason that the arms separated from the hinges? They were attached when I landed and for the initial work of unloading a rover. After a save, I came back and it was like this. It was still full functional. Did I goon something up?

Thanks!

Link to post
Share on other sites
  • 2 weeks later...

How difficult is it to make mods with robotic parts compatible with IR? The only current Module in the parts config is an MuMechToggle. Could I not just add a IR Module to the part and if so, would anything else need to be added to ensure compatibility?

Thanks.

Link to post
Share on other sites
On 4/28/2021 at 3:12 PM, DaveyJ576 said:

Hello!

I love your mod. Great work! I downloaded and installed a few days ago and have been tinkering with it. I am running 1.10 with BDB and have run into a semi-weird issue. 

 

Spoiler

tg0EeEP.jpg 

Does anyone have an idea for the reason that the arms separated from the hinges? They were attached when I landed and for the initial work of unloading a rover. After a save, I came back and it was like this. It was still full functional. Did I goon something up?

Thanks!

I've had this happen and, to be frank, it makes me avoid IR parts if I can. I notice it happens when re-entering a scene with a scaled down part, it seems to attach to where it would be if it was full size.

I still use the scissor lift part and some rail parts, don't be offended author. :)

Edited by ElonsMusk
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...