Jump to content

[1.8.x-1.12.x] - RasterPropMonitor (adopted)


JonnyOThan
 Share

Recommended Posts

Posted (edited)
3 hours ago, JonnyOThan said:

I mean...it's probably not an installation/runtime issue, but maybe something about how stuff gets rendered?  Since I can't see what's going on, I need screenshots of what you're seeing (from each eye), the part names, etc etc.

Let me fire up KSP once again. I'll get some screenshots to you shortly.  It might be worth noting that I've had this problem both with a Steam install and an install that I did from downloading it directly from the KSP website.

Almost all of the props seem fine, except for the JSI hud, which shows up with the pane being completely solid black (which is not only annoying in that it means I have to look down at the navball for attitude info, but it blocks out a good chunk of my field of view. It might have something to do with how MAS/MOARdV edits it with a patch, so I can't quite tell if it's on JSI's side or MAS's side.

 

Update:

Mk 1 Inline cockpit:

screenshot4.png

It looks like the mission timer display is also messed up. Correction: I was an idiot and forgot that you have to press the on button. It works fine.

I'm also getting this pop-up:

unknown.png

When I checked the logs, this is the most relevant line I could find:

[ERR 16:46:19.553] [AvionicsSystems] INITIALIZATION ERROR: MASMonitor configuration failed.

[ERR 16:46:19.553] [MASMonitor] Failed to configure prop #232 (MAS_JSI_BasicHUD)

[ERR 16:46:19.553] [MASMonitor] System.ArgumentNullException: Value cannot be null.
Parameter name: Failed to find MASFlightComputer initializing MASMonitor
  at AvionicsSystems.MASMonitor.Start () [0x00024] in <0bf90ae8ff9d477c823199001f706a26>:0 

So it seems to have something to do with how MAS interacts with the JSI HUD. I have the latest versions of both RPM and MAS and all necessary dependencies.

Edited by Raptor22
Link to comment
Share on other sites

18 hours ago, Raptor22 said:

Almost all of the props seem fine, except for the JSI hud, which shows up with the pane being completely solid black

Let's simplify...

Earlier you said
 

Quote

The HUD requires you to go crosseyed when viewing it in VR, which is somewhat uncomfortable

I don't see how the screenshot you posted demonstrates this.  I need screenshots *from each eye* to try to figure out if something is being drawn incorrectly, but in your image the HUD is just black.  Unless you mean the KSP UI?  When I'm playing in IVA mode I usually have it turned off, but that's also something that is kinda outside RPM's wheelhouse.

Also, I don't maintain MAS so please try doing all this without MAS installed.

Link to comment
Share on other sites

Posted (edited)
On 6/8/2021 at 9:17 AM, JonnyOThan said:

Let's simplify...

Earlier you said
 

I don't see how the screenshot you posted demonstrates this.  I need screenshots *from each eye* to try to figure out if something is being drawn incorrectly, but in your image the HUD is just black.  Unless you mean the KSP UI?  When I'm playing in IVA mode I usually have it turned off, but that's also something that is kinda outside RPM's wheelhouse.

Also, I don't maintain MAS so please try doing all this without MAS installed.

I think you're getting me and another person confused. I'm not using VR - you're confusing me with @RocketSimplicity. I don't even have a VR set. Please re-read the comment I made earlier, and keep in mind that when you're answering two people's questions at the same time, you need to remember who is having what problem so that you don't mix them up or somehow combine them together.

I've tried using it without MAS, but then I won't have any of the MAS IVAs. I've tried using MAS without RPM, and none of the props will show up. So it seems that I need both RPM and MAS for it to function.

The HUD seems to function in the regular MK 1 cockpit, not the MK 1 inline and a handful of others.

Edited by Raptor22
Link to comment
Share on other sites

Posted (edited)
19 hours ago, Raptor22 said:

I think you're getting me and another person confused.

!!! you're right! I'm so sorry!

I think the MAS initialization error is the key here, but I don't have any experience debugging that stuff.   I'd guess that this cockpit is missing the MASFlightComputer part module, which should be easy enough to add with a MM patch.  From my experience with RPM, a lot of modders confuse things that should be part modules with things that should be internal modules.  Here's a post describing it: 

 

Confirmed, looking at your ModuleManager.configcache, some cockpits have the MASFlightComputer module but the mk1 inline doesn't.

 

Edited by JonnyOThan
Link to comment
Share on other sites

On 6/9/2021 at 2:27 PM, JonnyOThan said:

!!! you're right! I'm so sorry!

I think the MAS initialization error is the key here, but I don't have any experience debugging that stuff.   I'd guess that this cockpit is missing the MASFlightComputer part module, which should be easy enough to add with a MM patch.  From my experience with RPM, a lot of modders confuse things that should be part modules with things that should be internal modules.  Here's a post describing it: 

 

Confirmed, looking at your ModuleManager.configcache, some cockpits have the MASFlightComputer module but the mk1 inline doesn't.

 

It looks like it worked! Thank you!

Link to comment
Share on other sites

  • 1 month later...

Hello! I apologise in advance for what is surely to be the 100th occourance of this question. Simply, is RPM stable with KSP 1.12.x? I've attempted to add it, and all dependencies (ASET, and a few IVA configs), with no success. Load loops always. Perhaps it's finally out to pasture in exchange for the MoarDV assets? Which, isn't bad if that's the case. A shame to be sure, this was by far my favorite mod, but I look forward to what folks will do with MDV's stuff if so.

Link to comment
Share on other sites

7 hours ago, Kalkuhthoroui said:

Hello! I apologise in advance for what is surely to be the 100th occourance of this question. Simply, is RPM stable with KSP 1.12.x? I've attempted to add it, and all dependencies (ASET, and a few IVA configs), with no success. Load loops always. Perhaps it's finally out to pasture in exchange for the MoarDV assets? Which, isn't bad if that's the case. A shame to be sure, this was by far my favorite mod, but I look forward to what folks will do with MDV's stuff if so.

New plugin may be better in many aspects, but there is a catch. It won't work with just installing new plugin. You also need (or rather each mod author need) to re-create all cockpits to use new plugin. And it is quite time consuming process and on top of that some of original mod authors are no longer active and original files are not available to be able to re-create cockpits. So, choice is to either, try to pach existing RPM, so it's all funcionality is still working, or ditch out everything and wait for some long time until mod autor create cockiptis for use with new plugin.

Link to comment
Share on other sites

  • 4 weeks later...

Is there a trick to showing your vessel on a ScanSat / Nav screen display? I can show MechJeb targets and Waypoints, and the blue tracking line functions, but the little vessel icon does not show. Mostly curiously because I'll survive if it's a scansat bug,

Link to comment
Share on other sites

It seems in-cockpit MechJeb functionality no longer works. Buttons are grayed out and do nothings and the screen doesn’t recognize it as installed.

Anyone have an idea how to patch it so it works? Thanks.

Link to comment
Share on other sites

22 hours ago, desepticon said:

It seems in-cockpit MechJeb functionality no longer works. Buttons are grayed out and do nothings and the screen doesn’t recognize it as installed.

Anyone have an idea how to patch it so it works? Thanks.

I have the same issue, please quote me if someone finds a fix to this so i can get a notification

Thanks you :).

Link to comment
Share on other sites

23 hours ago, desepticon said:

It seems in-cockpit MechJeb functionality no longer works. Buttons are grayed out and do nothings and the screen doesn’t recognize it as installed.

Anyone have an idea how to patch it so it works? Thanks.

i found a temporary solution:

Use the version 2.12.0 of mechjeb for KSP 1.11. the game says that it's incomptatible but it works

Link to comment
Share on other sites

14 hours ago, Virtualgenius said:

@JonnyOThanjust enquiring if  this is getting updated to the latest release ( Please Please)

Have you tried the latest version?  I haven't, but I'm not aware of any issues.  I do need to push out a new version to pick up a few things that have been fixed along the way.  It's not dead yet!

Link to comment
Share on other sites

20 hours ago, Vexmae said:

i found a temporary solution:

Use the version 2.12.0 of mechjeb for KSP 1.11. the game says that it's incomptatible but it works

Hmm. I'd rather not do that. There must be a way to change RPM so it recognizes the newer mechjeb version. Guess I'll have to wait.

Link to comment
Share on other sites

  • 2 weeks later...

Just pushed a new release.
https://github.com/JonnyOThan/RasterPropMonitor/releases/tag/v0.31.5

  • Update compatibility to ksp 1.12
  • Merge PRs related to camera drag cube & ascending node calculation
  • Fix ATMOSPHEREDEPTH variable
  • Fix SAS mode strings in ASET MFDs
  • Fix radial in/out swapping on SAS mode buttons
  • Fix Mechjeb integration with latest MJ version
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...