[1.12.5] SIMPLEX Assembly 1.2

[theJesuit]

SIMPLEX Assembly

Download here: https://spacedock.info/mod/2827

Licence = CC-BY-NC-SA http://creativecommons.org/licenses/by-nc-sa/4.0/ 

Simply, this adds the ability to manipulate all parts in Construction mode, if you have enough Kerbals to handle those part sizes. 

With Sandcastle you can print any size 2 (2.5m part) including crewed pods!

THANKS TO @Gotmachine for getting the MM patching correct!

 

WHAT TO EXPECT

All parts can be manipulated in Construction Mode.

Crewed Parts no longer contain Inventories (means that you will be able to build with with Sandcastle)

Stock Inventory Parts have 80% more volume rather than a storage volume of half their bounding box size (stock has THICK walls)

Keridian Dynamics is now supported.  When Extraplanetary Launchpads is installed, the EL parts are hidden as the KD are so much prettier.

This also works with the Community Resource Pack OR SIMPLEX Resources.  It will default to Simplex Resources if both are installed.

WHAT TO EXPECT WITH FIXED SOME THINGS the 1.2 update

If KDVA Keridian Dynamics is installed, the Simplex Part Printshop is removed.

 

WHAT TO EXPECT WITH FIXED SOME THINGS the 1.1 update

The 4x large container has the right number of models in the part.

The printer only appears with Sandbox.

Corrected the Sandbox printer containers to have the right volume.

 

WHAT TO EXPECT WITH SQUAD EXAPANSIONS, RESTOCK the 1.0 update

The different sized printshops are now gone (game breaking),  replaced with a simple (KD-PAM style) Printshop.

Inventories to enable printing now a thing.  Printshop will only print if an inventory is available!

ReStock Plus volumes are added

Squad Expansion volumes are added

Part Volumes only added if SandCastle is installed.

Tidied up some code

 

WHAT TO EXPECT WITH EXTRAPLANETARY LAUNCHPADS the 0.8 update

Added Keridian Dynamics as a supported parts mod.   PAM parts with Sandcastle are printers.  Mobile VAB works as the Simplex parts do too.

Altered backlist and whitelist for the printers.  Lab parts are balcklisted globally, but whitelisted in the lab.  Parts too large for the containers are balcklisted, and Printing parts now work by volume not by parts.

This mod is now compatible with the Community Resource Pack, if you prefer that to SIMPLEX Resources

 

WHAT TO EXPECT WITH SANDCASTLE the 0.7 update

There are three builder parts (based on old Mk2 Lander Can model, with attached Mk3 shaped printing rooms) each has whitelist of parts that they can build.

The whitelist is basically what could ACTUALLY fit within the confines of a cargo bay.  I've taken the measurements from the Part Volumes mod for size, and then extrapolated (and rounded slightly) for volumes - not using the Part Volume sizing.

The concept was that the 3D print room was 3.25m by 2.75m (.25 metre clearance to the outside of the walls), and then the internal heights for Small is 2.5m , Medium 5m, and Large 7.5m

This means that MOST stock parts can be printed in the Large, a dozen or so less in the Medium, and around half the stock parts can be printed in the Small.

These Builder Parts can be found in the Utility tag in the VAB.

 

The lab is the only part that will produced batteries, fuel cells, parachutes, and eva parts like jetpack, repair kit etc.

 

COMPATABILITY

Sandcastle with Simplex Resources requiring various ratios of MetalParts and CustomParts depending on Mods

Keridian Dynamics

ReStock

Making History, Breaking Ground

 

Recommending:

 Exoskeleton mod:

Sandcastle mod:

Keridian Dynamics:

https://github.com/zer0Kerbal/KeridianDynamics/releases

 

Edited July 6, 2023 by theJesuit
1.2 update

[pbristow]

I like the sound of this! Not gonna try it just yet, as I'm playing "almost pure stock" at present, but it's a definite candidate for once my tech tree is running out of new goodies to acquire, and I want to move on to more ambitious constructions.

Just had an idea: A nice partner for this would be a powered exoskeleton, that a Kerbal can wear to enhance their lifting ability three or four times (thus reducing the required crew-count on long-distnace building missions). Or perhaps just an "MLED" - Mechanical Lift Enhancement Device (a car jack!) that a Kerbal can carry in their inventory to double their lifting ability.  (And maybe it adds more to an engineer's lifting ability than to that of an "untrained" vertical elevation manipulation operative(TM), such as a mere pilot or scientist. =:o} )

D'OH!!! [SLAPS FOREHEAD] And I've just now seen the link to the Exoskeleton mod.

Oh well, at least now I know it wasn't a completely stupid idea!  =:oD

 

[theJesuit]

8 hours ago, pbristow said:

almost pure stock" at present,

I would argue that at 0.5 the mod is also almost pure stock as it only removes crewpods inventory and allows all parts to be manipulated.  But that is my own version of 'stock'

Update soon for Sandcastle and SIMPLEX Resources compatability.

[theJesuit]

Updated  to 0.6

Released on 2021-08-23

Update to 0.6

Added Sandcastle config for Simplex Resources

With Simplex Resources parts now require various ratios of MetalParts and CustomParts depending on which category it belongs too. If Simplex Resources isn't installed, then the default is stock Ore.

Still to come:

Sandcastle config for Community Resource Pack using MaterialKits and SpecializedParts which will have the same ratios as Simplex Resources.

Thinking of getting rid of the stacked CargoContainers in favour of (not opening) Mk3 and mk2 Cargo bays.  The 3D printers would then be part of these.

This would mean that you could build pretty much any size 2 part, including the MK2 lander can.  without having head cannon issues of them not quite fitting inside the stacked 4x 2.5m cargo containers.    

[theJesuit]

This is where I am heading with SandCastle:

I'm going to also include an option to allow for Community Resource Pack MaterialKits and Specialised Parts if CRP is installed, but not Simplex Resources.  Note too, that Simplex Resources also changes (or used to?) how regular rockets are built with EL based of modules - but Sandcastle may take care of that for me - I haven't had time to check yet now that taniwha since has been back!

I'm also going to change the inventory parts that I have included.  Instead I'm thinking of using Mk3 cargo bays without the opening and closing doors though :), and using the welding mod to add in the original Mk2landercan  and IVA at the bottom.

So that means there will be a small, medium and large 'workshop' parts that will mean anything that is a 2.5m diameter part will be able to be printed.  Each workshop will have a limit on what it can create.

Some parts will be blacklisted to only be made with the lab, like science parts, probes, and parachutes and the cargo parts.

This will be in the 0.7 release over the next couple of days.

 

[theJesuit]

So spent time this morning  working on the Ubio Welder to create the manufacturing parts.

I put an original mk2landercan as the base, a a  resized mk3 to 2 adapter 1/10th height, and first of all a small mk3 cargo bay, replaced with a mk3 small tank.  I replaced the cargo bay with the tank as the doors do strange things upon weldong and craft load.  All is well but if i cap it  back to 2.5m with adapter then i was not able to EVA out of the part.

Ot seems to be if the part is too tall then the EVA hatch is obscured for some reason.

[theJesuit]

Updated to 0.7

Sandcastle printers, and volumes for most parts so they can be printed and stored

I'm considering making a standard print size rather than calculating volumes.  This would mean a volume based only on height for most parts.

Upon release, I'm also considering that I'll change the printers so that the crew module is separate from the inventories.  This would simplify the whitelisting as well.  TBF, the whitelisting will probably change to a blacklisting of lab only printed things.

I'm thinking that the printer crew module will become able to print all volumes, but only landed.  An orbital dock  would then include a 3D Printer that is much larger.  But there is may be an issue to ability to manipulate such large masses.   Not sure what to do about an orbital dock yet.

 

Oh.  I also made the decision for lab only parts. Parachutes because they are fabric, science parts because it is the lab (need calibration), batteries because  hazardous.

[pbristow]

Those all seem like sensible decisions. Looking forward to seeing the results!  =:o}

 

[theJesuit]

13 hours ago, pbristow said:

Those all seem like sensible decisions. Looking forward to seeing the results!  =:o}

 

Thanks!

It would seem that the formulas for build ratios are difficult to piece together for a catchall formula between Extraplanetary Launchpads and Sandcastle.  But nevermind!

With SIMPLEX Resources, the EL formulas are made so that everything requires MetalParts, but I create a ratio with CustomParts when a PartModule is installed (as specified, so variant textures are included as an example, but the Command  module is, rcsFX, engine etc.). The more complicated a part, the higher the number of PartModules in its cfg, the more CustomParts you need.

But this is with SIMPLEX Resources, and has nothing to do with this mod, expect I'll add that functionality in if you are using this mod with the community resource pack, but instead using MaterialKits and Specialised Parts.

I'll be supporting EL as well in the next update, the part volumes may wait a little. With this mod, when both Keridian Dynamics and EL are installed, EL parts (which don't look that great TBH), will be hidden as the KD parts look so much nicer and there is no point in doubling up.

 

With Sandcastle I will also be including support for Keridian Dynamics, which are some great parts - basically what I've been using my own 'parts' for.

Peace.

[theJesuit]

Update done.

Compatible with Community Resource Pack, Keridian Dynamics.

Redid how the parts list for printing in Sandcastle is coded.

 

Peace.

[Guest]

very cool mod!

[theJesuit]

Version 1.0 will be released in the near future.

The old mk2 landercan printshops will be amalgamated into a single one and three diffent sized inventories will be available instead.  All on the same theme of stock models being reused.

ReStock will be supported so that some models don't disappear.  I supposed I should support the stock (making history) and restock plus 1.875m  models.

[theJesuit]

Update being worked on.

I found very straight forward to sort out the parts for the DLCs and ReStock... 

Should be out like in 24 hours?

A future update will be Mining Expansion, Kerbalism, various  NearFuture mods as well, SSPX.  Maybe also planetside exploration and HabTech2.

[theJesuit]

Full 1.0 release.

Update, changelog in the OP.

Restock, Making History, Breaking Ground.

 

Oh, and supplied Printshops have changed.  Save Breaking warning.

[pbristow]

On 10/5/2021 at 7:35 PM, theJesuit said:

Full 1.0 release.

A momentous day!  [THUMBS UP] =:o}
 

[theJesuit]

1.2 Update

The Simplex Printshop that was created for the Sandcastle Mod is removed if KDVA is installed.

[theJesuit]

Hi everyone,

I'm sitting here wondering whether I could make a SIMPLEX Asssmbly alternative to KDVA and Simple Construction. Maybe SIMPLEX Assembly Plus, so that you can still use Simplex Assembly with Sandcastle.  This would using the welder to create stock based parts, probably with RestockPlus.

The idea would be to use the ideas of Simple Construction - the lab would be to create CustomParts, and possibly the ISRU makes MetalParts.

A Mobile VAB would possibly use the old mk2 cabin with a resized 1.875m pr 2.5m storage bay with opening doors.  I'd make it 5m wide.

A 7.5m or 10m wide orbital launch and with too.  This would be the same as above but have wide scaffold around it. Using panels to make the scaffold.

Another idea is to make a launchpad from a ground anchor.

This is only a thought currently.  Keep using KDVA for now!

[Mitokandria]

I love this mod so much! I keep forgetting what the name is everytime I make a new game, but it is absolutely essential to my enjoyment!