Jump to content

SPACE STATIONS! Post your pictures here


tsunam1

Recommended Posts

Mun Orbital Cube Base is complete! (... for now ... :sticktongue:)

Question for you: Mind opening the debug window in the Tracking Station and then switching to the space station from there, and letting me know if you see any mention of "None of the provided nodes was valid"?

Link to comment
Share on other sites

Here is an update to my ISS build! I wanted to specifically show off the Pirs/Poisk modules made possible from tantares. Current part count is at 120 parts.

Check the album for descriptions and details!

http://imgur.com/a/xG36S

Big photos ;)

https://i.imgur.com/rGo5eG3.png

https://i.imgur.com/ZkLorfL.png

https://i.imgur.com/iFQ7jHI.png

https://i.imgur.com/C1hiXh5.png

https://i.imgur.com/Bmwjn0f.png

https://i.imgur.com/ecVw9W4.png

https://i.imgur.com/WK2LZRl.png

https://i.imgur.com/eMOfaDl.png

https://i.imgur.com/xfMNb5H.png

https://i.imgur.com/1I2Foq7.png

Thank you tantares!!!!

EDIT: I just realized the station has a typo in its name :sticktongue:

Holy boop! You welded that up real good. It looks perfect!

Rune. Hats off, that must have taken a lot.

Link to comment
Share on other sites

What version of the part welder are you using? Last time I tried, it didnt seem to work with 1.04.

This one: http://forum.kerbalspaceprogram.com/threads/107273-0-90-UbioZur-Welding-Ltd-Continued-2-1-1-%282015-01-14%29?p=2113214&viewfull=1#post2113214

However, my parts are not from the configs generated by the mod, I only copy the MODEL labels and NODE positions into another new custom config that I write myself for each part.

Link to comment
Share on other sites

I made a thing.

When we last left off, my CUBE station was orbiting the Mun and I thought I was finished.

YKd5mX4.jpg

.

.

But, apparently I wasn't finished. I realized we needed something else. What did we need? This! Its a really, really long arm.

QfGPHt6.jpg

KGpiBWX.jpg

.

.

What are those things?

mRrm8LV.jpg

ESCAPE PODS! :) Each pod has 8 seats, and this arm holds 3 pods. That's 24 escape seats, but really, in an emergency, we could probably stuff 4 more into each for a total of 36 Kerbals in this arm. A second arm is probably going to go up, but I'm really starting to hit the part count limit. FPS drop is becoming very noticeable. Therefore, my massive base might have a realistic cap of 72 Kerbals at any one time. Currently there are 34 on board, so this single arm has enough space for every single Kerbal to safely escape, should the need arise.

- - - Updated - - -

How do they work? Glad you asked:

6435eXj.jpg

.

1zDHQ6F.jpg

.

GBd6Udf.jpg

.

t0LasWb.jpg

I played around with several variations trying to fit enough seats into each escape pod and enough pods into the arm without making the whole thing impossibly large. Three pods seemed the best for my needs. Originally, it was just the two, and I tried four pods, but it ended up being too long to reasonably launch. One pod is ejected separately, and the other two are ejected as a pair. They separate once they are cleared from the base.

fPh8eNg.jpg

.

doZ5Smh.jpg

.

LRXqDBa.jpg

.

vzrVP55.jpg

- - - Updated - - -

Now we have three pods, ready to head home. Basically, put them on an eject burn, lower periapsis somewhere into Kerbin's atmosphere, and drop to safety. We need somewhere in the neighborhood of about 300 m/s delta-V, and these pods have a shade more than 450 m/s.

AgPPoUE.jpg

.

vNGhyeP.jpg

.

GfHqXbq.jpg

.

tp7Qelw.jpg

.

CoryTMt.jpg

.

JQwWaah.jpg

Ok, so not a perfect landing, but close enough. Everybody would be safe and unharmed. If I had landed on flatter land, it probably would have ended up on the feet. Still, I count this as a successful test of the emergency preparedness. Escape pods work great!

Edited by mellojoe
Link to comment
Share on other sites

NxCAmCx.png

My refueling space station in LKO, currently with VOSTOK Orbiter (winged ship on the left) and Roadrunner II SSTO (right) docked to it and refueling.

The VOSTOK will stay attached for the duration of station's existence, acting as an emergency shuttle or maybe a Kerbin-Mun crew ferry. We'll see.

Roadrunner II is due to undocking and reentry after enough fuel for deorbiting is transferred.

Link to comment
Share on other sites

This my Life Support Station setup, had to use RCS engines as the JumpDrive mod was making engines powerless (0.9), best part is tho it's using my 2x5 Stack Station Connection.

screenshot6.png

This is my Kethane Outpost with the newly arrived and set up life support system. (Getting everything ready 1st, can't have all the Kerbles die before I can get them what they need)

{Still have a few Inflatable Modules stored away}

screenshot7.png

And soon after I had to pop off and grab this lil guy, love that feeling just at the end of the chase.

screenshot9.png

(The Big bulgy thing is a JumpDrive, got me to Minmus then alot of hard burns)

Link to comment
Share on other sites

I've been working on an orbital shipyard for making deep space explorers and colony supply ships. So far it's only been three launches with a pretty big launcher. I messed up on the first module since two of the smaller docking ports are blocked by the solar panels, but I am liking it so far. It's 100 parts and uses parts from Nertea's and Roverdude's mods. Right now, Bill and Jeb have enough snacks to keep the grouchies at bay for about a year and a half. Next up, Aeroponics, Rocket part storage, and workshops.

F0HP344.png

Link to comment
Share on other sites

I was unaware there was a Space Station thread when I posted mine in it's own thread, so I'm going to post it here too. :)

It doesn't compare with some of the more extravagant stations here, but it's mine and I'm proud of it!

I give you The Dunmanifestin!

20742559739_3f800014cd_b.jpg

The full gallery of it's construction is here:

https://www.flickr.com/photos/96136597@N05/albums/72157657422055160

The first few pictures at the start are my hive station - an asteroid mining facility with 'bees' that would go out and bring back asteroids to process. I was quite proud of it until I parked my SSTO next to it and realized how small it was.

More comments with the pictures in the gallery!

Link to comment
Share on other sites

Here are some shots of my prototype station in progress. It will be a circle when finished, with an inner ring and 12 sides.

The far from complete prototype:

Station%20004%20experiment_zps17capglm.png

If you notice, I have one passenger sectional launch oriented differently than the others. I think this is how I will implement my final version, once I get the rest of the station figured out. Turn on the RCS and rotate for artificial gravity.

I wonder how much gravity it can tolerate before spinning apart?

A typical cargo section for the Passenger module sections:

Station%20004%20passenger%20cargo%20bay_zps8hdmcjgj.png

To keep it real, used three of the four adapter points for parts, leaving access for Kerbal movement. now that I know how to modify lengths, I'll use structural fuselage between two opposing parts. A little mass imbalance shouldn't matter.

A typical cargo section in the rocket sections:

Station%20004%20Rocket%20cargo%20bay_zps4vminfzg.png

Now I need to build inward for an inner ring, and center section. I can continue with that, Now that I know how to modify part lengths while maintaining diameter.

All the modified parts used, were modified by me. I have downloaded a few, only implemented one downloaded part in my game files. The size 2 and 3 hub. Mainly used the downloaded parts to reverse engineer the modifying parts.

I believe so far, I only used in this, a size 3 structural, modified from the Structural Fuselage, a scaled up the Docking port senior by 1.5 for the size 3 ports, scaled up the BZ-52 radial Attachment Points to size 2 and 3, and some super capacitors. I increased the battery storage to reflect new technology we have.

Edited by Wild Cobra
Link to comment
Share on other sites

Heat bug has destroyed this station twice... Once when docking the "crew rotational device" (I really couldn't think of a better name...) and then after we magic'd another one into orbit to fix it... a wobble started, and the same piece "overheated"...

Redesigned that link and "magic'd" it into orbit again. Much more detail than can be seen, it's already ~250+ parts. Quite chuffed with the positioning lights and the "elbow cupola module".

Javascript is disabled. View full album
Edited by Vanamonde
Link to comment
Share on other sites

http://i.imgur.com/NxCAmCx.png

My refueling space station in LKO, currently with VOSTOK Orbiter (winged ship on the left) and Roadrunner II SSTO (right) docked to it and refueling.

The VOSTOK will stay attached for the duration of station's existence, acting as an emergency shuttle or maybe a Kerbin-Mun crew ferry. We'll see.

Roadrunner II is due to undocking and reentry after enough fuel for deorbiting is transferred.

What mod is that inflatable habitat on the left? (I think it spins?)

Link to comment
Share on other sites

I've just put together a kit of rockets that are capable of putting together a space station at 250km orbit around Kerbin.

KSPStat13.jpg

For anyone who would like to see the flight and build sequence, as well as download the zip file containing the required craft, it has it's own thread in the Spacecraft Exchange Kerbin Space Station Kit

Link to comment
Share on other sites

I decided to build yet another space station. It will take about 10-15 launches to get everything up to the 420km orbit.

KVyHkI1.png

I've already launched 1/3 of the station using this rocket. I think I can use it for about 90% of the total station. Each payload has a T-100 tug attached. Very reliable setup for RO RSS.

Ts4rSc8.png

Here's some of the station being designed. I will then break it up for deployment.

Edited by hellblazer
Link to comment
Share on other sites

Forgot what I called this station, but here it is doing an aero-capture on Laythe (re-entry heat set to 0%) [Also, Near Future mods and others in use here]

oqkU52I.jpg

Some of the crew while it was in LKO

uzl4BZx.jpg

And Bill performing some integrity checks to make sure all is well.

UAqaCiu.jpg

And here's a completely unrelated station with an extra arm (containing ISRU modules), and two shuttles for crew transport

FpvTizr.jpg
Edited by Slam_Jones
Link to comment
Share on other sites

Forgot what I called this station, but here it is doing an aero-capture on Laythe (re-entry heat set to 0%) [Also, Near Future mods and others in use here]

http://i.imgur.com/oqkU52I.jpg

Some of the crew while it was in LKO

http://i.imgur.com/uzl4BZx.jpg

And Bill performing some integrity checks to make sure all is well.

http://i.imgur.com/UAqaCiu.jpg

And here's a completely unrelated station with an extra arm (containing ISRU modules), and two shuttles for crew transport

http://i.imgur.com/FpvTizr.jpg

i love those small shuttles :D:D:D:D:D:D:D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...