zer0Kerbal Posted May 11, 2022 Share Posted May 11, 2022 (edited) Fuselage (DMF) Adds seven (7) stock-a-like flat fuselage parts. These parts are rectangular fuselage pieces meant to be radially attached. By zer0Kerbal, originally by @DaMichel, and then by @Bezzier View full album Forward by @Bezzier Fuselage: These parts are rectangular fuselage pieces meant to be radially attached. You get two center pieces, an air inlet, a terminal piece, an adapter to the standard 1.25 m parts and as extras a smallish tail boom and a slanted cone. Patch for B9 fuel switch included. The remaining patches are /YMMV/. Contains seven (7) stock-a-like flat fuselage parts tank [normal, long] air inlet terminal piece flat to 1.25m adapter radially attached tail boom slanted cone Cabin Notes by @DaMichel Usage of FerramAerospaceResearch is strongly recommended. The parts have some values for stock aerodynamic parameters but i have no idea if they are reasonable nor will i take the time to balance for stock. In contrast, FAR figures this stuff out automagically. See More Discussions and news on this mod: See Discussions or KSP Forums Changelog Summary for more details of changes : See ChangeLog Known Issues for more details of feature requests and known issues : See Known Issues GitHub Pages : See Pages Youtube review by @Kottabos[ Kottabos Gaming ] Localization English your translation here HELP WANTED - See the README in the Localization folder for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome! Installation Directions 1 Use CurseForge/OverWolf App (currently does not install dependencies) or Dependencies Kerbal Space Program 2 DaMichel Ltd (DM/L) Suggests DaMichel's CargoBays (DCB) DaMichel's Fuselage (DAR) DaMichel's SphericalTanks (DST) DaMichel's Fuselage (DMF) GPO (Goo Pumps & Oils') Speed Pump (GPO) TweakScale Supports Either 3 Module Manager Module Manager /L GPO (Goo Pumps & Oils') Speed Pump (GPO) TweakScale Active Texture Manager (ATM) Include a configuration which scaling in general and compression of the normal map If you like a more aggressive configuration - delete Compatibility/ActiveTextureManager.cfg Advanced Jet Engine (AJE) The inlet has a configuration for AJE Based on the Sp+ rectangular inlet and made the inlet larger Ferram Aerospace Research (FAR) Firespitter Core If you have the Firespitter DLL and no RealFuels it will use it to give the parts swappable tanks Chose between LF, LF+OX and MP variants Real Fuels configs are included Tags parts, resources *red box below is a link to forum post on how to get support* Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date Credits and Special Thanks @DaMichel for creating this glorious parts addon! @Bezzier for the picking up where DaMichel left off see Attribution.md for more comprehensive list Legal Mumbo Jumbo (License provenance) Spoiler Current (2) - zer0Kerbal Forum: Thread - Source: GitHub License: Disclaimer(s) All bundled mods are distributed under their own licensesAll art assets (textures, models, animations, sounds) are distributed under their own licenses see Notices.md for more legal mumbo jumbo Previous Author (1) - Author: @Bezzier Color Curves Company Forum: Thread - Download: GitHub - Source: GitHub License: Original (0) - Author: @DaMichel Forum: Thread - Download: Dropbox - Source: Dropbox License: Permission granted by original author Content originally created by DaMichel. These parts are released under Creative Commons Attribution-ShareAlike 3.0 Unported License. I used textures from StretchySRBs, heavily modified/integrated into my own. How to support this and other great mods by zer0Kerbal this isn't a mod. ;P↩︎ may work on other versions (YMMV)↩︎ Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date! Edited May 13, 2022 by zer0Kerbal update links and lasso the birds Quote Link to comment Share on other sites More sharing options...
Geonovast Posted May 11, 2022 Share Posted May 11, 2022 Moved to Add-On Development. In the future, please make sure your Add-On threads contain content that is accessible by the community and complies with our Add-On Posting rules. Thank you Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted May 11, 2022 Author Share Posted May 11, 2022 (edited) 3 minutes ago, Geonovast said: Moved to Add-On Development. In the future, please make sure your Add-On threads contain content that is accessible by the community and complies with our Add-On Posting rules. Thank you like this? see OP. Kindly move back. was (and still am working on the readme) Edited May 11, 2022 by zer0Kerbal Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted May 13, 2022 Author Share Posted May 13, 2022 Version 1.1.0.0-adoption - <Fresh Coat of Paint: Fuselage> 17 Feb 2020Release for Kerbal Space Program [KSP 1.7.3] DO A CLEAN INSTALL: DELETE EXISTING INSTALLATION THEN RE-INSTALLDownload from CurseForge Initial Adoption Version 1.1.0.0-adoption - <Fresh Coat of Paint: Fuselage> Released on 2020-02-17 for Kerbal Space Program (KSP) 1.9.x Spoiler Adopted for curation by zer0Kerbal Localization Added <en-us.cfg> translations welcomed through GitHub Push Request updates #6 - Localization - Master closes #7 - American English <us-en.cfg> closes #23 - Part Localization Updated file structure and modernization modernized part.cfg many little changes to patches/parts. Added Kerbal Changelog added Readme Created github repo SpaceDock entry CKAN entry Curseforge entry Forum post .json Status Issues updates #24 - Previous Releases closes #25 - 1.1.0.0-adoption updates #28 - Asset Updates See More Changelog Summary for more details of changes : See ChangeLog Discussions and news on this mod : See Discussions or KSP Forums Known Issues for more details of feature requests and known issues : See Known Issues GitHub Pages : See Pages Localization English your translation here HELP WANTED - See the README in the Localization folder for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome! *red box below is a link to forum post on how to get support* Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date How to support this and other great mods by zer0Kerbal Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted May 13, 2022 Author Share Posted May 13, 2022 Version 1.1.0.1-prerelease - <Spit'n'Polish> Released on 2020-02-23Kerbal Space Program 1.9.1 DO A CLEAN INSTALL: DELETE EXISTING INSTALLATION THEN RE-INSTALLDownload from CurseForge Initial prerelease Thank You KottabosGames for the review and suggestions! BenjaminCronin for pointed out decorative right brace in changelogs wite-out applied. Also dangling VERSION superglued applied. Spoiler Adjusted All Parts strength temperatures adjusted breakingForce on all parts from 50 to 200 (except where noted) adjusted breakingTorque on all parts from 50 to 200(except where noted) adjusted B9fuelswitch to have LF come after Structural instead of LFO [explosionPotential] = 0.5 [buoyancy] = 0.1 Added [DM-fuselage-intake.cfg] same specs like the Ram Air Intake. Added [thermalMassModifier] = 12.0 machcurve to ModuleResourceIntake on intake Adjusted intakeSpeed from 10 to 15 [RESOURCE] [IntakeAir] amount/maxAmount from 0.2 to 2.0 [entryCost] from 1600 to 14000 [cost] from 2000 to 2680 [maximum_drag] from 0.2 to 0.3 [minimum_drag] from 0.2 to 0.3 added [ModuleAnimateHeat] [stackSymmetry] = 2 [DM-fuselage-cone] basing stats on: Advanced Nose Cone - Type B (pointyNoseConeB) Adjusted [scale] = 0.9375, 0.9375, 0.9375 from 1.0, 0.9375, 1.0 noted by Kottabo [entryCost] to 8000 from 1600 corrected typo on [maximum_drag] should have been 0.1 instead it was 0.11 [angularDrag] to 0.25 from 0.5 [maxTemp] to 2000 from 2900 Added size2 to [bulkheadProfiles] = mk1, size2, srf [explosionPotential] = 0.5 [CoMOffset] = 0.0, 0.0, -0.313 [CoPOffset] = 0.0, 0.0, -0.313 [CoLOffset] = 0.0, 0.0, -0.313 [CenterOfDisplacement] = 0.0, -0.2, 0.0 [thermalMassModifier] = 6.0 [emissiveConstant] = 0.95 [buoyancy] = 0.1 [ModuleAnimateHeat] [DM-fuselage-tailboom] Based upon Tail Connector A (airplaneTailB) Adjusted [entryCost] to 2500 from 1600 [cost] to 500 from 200 [crashTolerance] to 8 from 20 [maxTemp] to 2200 from 2900 Added [thermalMassModifier] = 6.0 [emissiveConstant] = 0.95 [explosionPotential] = 0.5 [CoMOffset] = 0.0, -1.5, 0.0 [CoPOffset] = 0.0, -1.5, 0.0 [CoLOffset] = 0.0, -1.5, 0.0 [CenterOfDisplacement] = 0.0, -1.5, 0.0 [buoyancy] = 0.1 [explosionPotential] = 0.5 [ModuleAnimateHeat] [DM-fuselage-X1] DMF - Flat Fuel Tank X1 based upon Mk2 Rocket Fuel Fuselage Short(mk2FuselageShortLFO) Adjusted [entryCost] to 15000 from 1600 [crashTolerance] to 50 from 10 [maxTemp] to 2500 from 2900 Added [buoyancy] = 0.1 srf to [bulkheadProfiles] = mk1, srf [mirrorRefAxis] = 0, 0, -1 [ModuleLiftingSurface] [DM-fuselage-X2] DMF - Flat Fuel Tank X2 based upon Mk2 Rocket Fuel Fuselage(mk2FuselageLongLFO) Adjusted [entryCost] to 18000 from 1600 [crashTolerance] to 50 from 10 [maxTemp] to 2500 from 2900 Added [buoyancy] = 0.1 srf to [bulkheadProfiles] = mk1, srf [mirrorRefAxis] = 0, 0, -1 [ModuleLiftingSurface] [DM-fuselage-front] DMF - Flat End based upon (noseConeAdapter) NCS Adapter Adjusted [entryCost] to 8000 from 600 [mass] to 0.1 from 0.11 [angularDrag] from 0.25 // 0.5 [maxTemp] to 2400 from 2900 Added [explosionPotential] = 0.5 [CenterOfDisplacement] = 0.0, -0.2, 0.0 [thermalMassModifier] = 6.0 [emissiveConstant] = 0.95 [buoyancy] = 0.1 [bulkheadProfiles] = mk1, size0 [ModuleAnimateHeat] [DM-fuselage-adapter] DMF - Flat to 1.25m Round Adapter based upon (mk2SpacePlaneAdapter) Mk2 to 1.25m Adapter Adjusted [entryCost] to 14000 from 1600 [minimum_drag] to 0.1 from 0.3 [angularDrag] to 2 from 1 [crashTolerance] to 50 from 10 [breakingForce] to 50 from 200 [breakingTorque] to 50 from 200 [maxTemp] to 2500 from 2900 Added srf to [bulkheadprofiles] = mk1, size1, srf [buoyancy] = 0.1 [emissiveConstant] = 0.8 [explosionPotential] = 0.5 [ModuleLiftingSurface] Status Issues updates #24 - Previous Releases closes #26 - 1.1.0.1-prerelease updates #28 - Asset Updates See More Changelog Summary for more details of changes : See ChangeLog Discussions and news on this mod : See Discussions or KSP Forums Known Issues for more details of feature requests and known issues : See Known Issues GitHub Pages : See Pages Localization English your translation here HELP WANTED - See the README in the Localization folder for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome! *red box below is a link to forum post on how to get support* Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date How to support this and other great mods by zer0Kerbal Version 1.1.0.2-release - <Superglue and Dusting> Released on 2020-03-09Kerbal Space Program 1.9.1 DO A CLEAN INSTALL: DELETE EXISTING INSTALLATION THEN RE-INSTALLDownload from CurseForge Initial release Spoiler cleaned part.cfg's of extraneous // comments updated changelog to use updated KERBALCHANGELOG formatting. [B9PartSwitch.cfg] Localized added side nodes Status Issues closes #24 - Previous Releases closes #26 - 1.1.0.2-release updates #28 - Asset Updates See More Changelog Summary for more details of changes : See ChangeLog Discussions and news on this mod : See Discussions or KSP Forums Known Issues for more details of feature requests and known issues : See Known Issues GitHub Pages : See Pages Localization English your translation here HELP WANTED - See the README in the Localization folder for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome! *red box below is a link to forum post on how to get support* Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date How to support this and other great mods by zer0Kerbal Quote Link to comment Share on other sites More sharing options...
James Kerman Posted May 15, 2022 Share Posted May 15, 2022 Thread moved to add-on releases. Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted May 15, 2022 Author Share Posted May 15, 2022 Just now, James Kerman said: Thread moved to add-on releases. Thank you @James Kerman! +1 Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted July 26, 2022 Author Share Posted July 26, 2022 Version 1.1.99.0-prerelease - <Split'n'Polish: Fuselage> edition 23 Jul 2022 Released for Kerbal Space Program [KSP 1.12.x] DO A CLEAN INSTALL: DELETE EXISTING INSTALLATION THEN RE-INSTALL Download from CurseForge Changes Summary 1.1.99.0 Initial Prerelease New Dependency DaMichel Ltd (agency, flag, common files)(DM/L) Spoiler License Updated License: CC-BY-SA-4.0 was: CC-BY-SA-3.0 closes #36 - License Compatibility Add [ghostparts.cfg] v1.0.0.0 part renamed: [DM-fuselage-intake] --> DMfuselage-intake Update All rename [B9Volume] -> [TankVolume] [ActiveTextureManagement.cfg] - v 1.0.0.0 disabled by default renamed to [ActiveTextureManagement.cfg.0] [AdvancedJetEngine.cfg] v1.0.0.0 [B9FuelSwitch.cfg] v1.2.0.0 simplified patch swap [SUBTYPE] name <--> title [B9NodeSwitch.cfg] v1.0.0.0 [ModularFuelTanks.cfg] v1.1.0.0 simplified patch one patch instead of five [description] correct ModuleFuelTanks --> Modular Fuel Tanks [RealFuels.cfg] v1.1.0.0 simplified patch one patch instead of five added [description] Parts Add header [DRAG_CUBE] @thumbs Update [manufacturer] = #DML-Agency-titl [DM-fuselage-adapter] v1.0.1.0 [tags] now #autoLOC_500561 was #DMF-adapter-tags [ModuleCargoPart] Dimensions: x: 1.25, y: 1.88, z: 1.25 Bounding Box Size: 2930.072 liters [packedVolume] = 3000 [DM-fuselage-front] v1.0.1.0 [tags] now #autoLOC_500162 was #DMF-front-tags [ModuleCargoPart] [packedVolume] = 2150 Dimensions: x: 1.25, y: 1.88, z: 0.89 Bounding Box Size: 2091.797 liters [DM-fuselage-cone] v1.0.1.0 [tags] now #autoLOC_500111 was #DMF-cone-tags [ModuleCargoPart] Dimensions: x: 1.16, y: 1.88, z: 1.16 Bounding Box Size: 2524.812 liters [packedVolume] = 2600 [DM-fuselage-tailboom] v1.0.1.0 [tags] now #autoLOC_500165 was #DMF-tailboom-tags [ModuleCargoPart] Dimensions: x: 0.40, y: 3.75, z: 0.30 Bounding Box Size: 450 liters [packedVolume] = 500 [DM-fuselage-X1] v1.0.1.0 [tags] is #autoLOC_500573 was #DMF-X1-tags [ModuleCargoPart] Dimensions: x: 1.25, y: 1.88, z: 0.89 Bounding Box Size: 2091.797 liters [packedVolume] = 2125 [DM-fuselage-X2] v1.0.1.0 [tags] is #autoLOC_500573 was #DMF-X2-tags [ModuleCargoPart] Dimensions: x: 1.25, y: 3.75, z: 0.89 Bounding Box Size: 4183.594 liters [packedVolume] = 4200 [DM-fuselage-intake] v1.0.1.0 [tags] is #autoLOC_500575 was #DMF-intake-tags [ModuleCargoPart] Dimensions: x: 1.25, y: 2.23, z: 0.89 Bounding Box Size: 2487.771 liters [packedVolume] = 2500 closes #40 - Update Parts Asset Updates create Assets/ folder convert from mesh to MODEL rename models to unique names textures to unique names update model pointers (.png et al to .dds) model texture pointers to new names relocate assets to Assets/ eliminate duplicate textures duplicate models relocate part.cfg to Parts closes #28 - Asset Updates Localization Update [en-us.cfg] v1.1.0.0 [readme.md] v2.1.2.0 [quickstart.md] v1.0.1.1 Config/ [Fuselage.cfg] v1.0.0.0 adds localized tags to parts Parts [ModuleToggleCrossfeed] #DMF-enableText --> #autoLOC_236028 // Enable Crossfeed #DMF-disableText --> #autoLOC_236030 // Disable Crossfeed add: #autoLOC_236032 // Toggle Crossfeed [ModuleAnimateGeneric] #DMF-startEventGUIName --> #autoLOC_6001425 // Toggle Intake #DMF-endEventGUIName --> #autoLOC_6001426 // Close Intake #DMF-actionGUIName --> #autoLOC_6001427 // Open Intake updates #6 - Localization - Master closes #7 - American English <us-en.cfg> closes #37 - Add localized tags to parts docs/ Add/Update [Attribution.md] v1.0.7.1 [ManualInstallation.md] v1.1.8.0 [404.md] v1.0.3.2 [LegalMumboJumbo.md] v1.0.5.1 [Localizations.md] v1.1.7.0 [Marketing.md] v1.0.1.0 [Notices.md] v1.0.1.0 [Part-Catalog.md] v1.1.4.0 [Why.md] v1.1.0.0 [_config.yml] [changelog.md] add header for docs/ closes #38 - docs/ Documentation Update [Readme.md] v1.6.9.2 [ReleaseNotes.md] v1.3.1.1 [Fuselage.version] remove [KSP_VERSION_MAX] closes #39 - Update Documentation Status Issues closes #2 - Fuselage (DMF) 1.1.99.0-prerelease <Split'n'Polish: Fuselage> closes #3 - 1.1.99.0 Verify Legal Mumbo Jumbo closes #4 - 1.1.99.0 Update Documentation closes #5 - 1.1.99.0 Update Social Media See More Changelog Summary for more details of changes : See ChangeLog Discussions and news on this mod : See Discussions or KSP Forums Known Issues for more details of feature requests and known issues : See Known Issues GitHub Pages : See Pages Localization English your translation here HELP WANTED - See the README in the Localization folder or the Quickstart Guide for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome! red box below is a link to forum post on how to get support Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date How to support this and other great mods by zer0Kerbal Quote Link to comment Share on other sites More sharing options...
RunaDacino Posted yesterday at 09:59 AM Share Posted yesterday at 09:59 AM Hello! I encountered a breaking bug with this mod and "Planes With Purpose" (Tudor Aerospace). The bug is apparently the use of FOR[AJE] in the AJE.cfg patch, as it confuses PWP even tho I am not using AJE. The original bug report is herefore linked. I fixed it without thorough testing by changing \GameData\DaMichel\Fuselage\Patches\aje.cfg to use AFTER rather than FOR. git issue: https://github.com/zer0Kerbal/Fuselage/issues/43 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.