Superfluous J Posted October 25, 2015 Share Posted October 25, 2015 Can the Altitude alarm not do this already? set to the edge of atmosphere for the target, or am I thinking of something else?The altitude alarm does not do it automatically. Imagine you've a ship heading to Jool with an aerobrake already on your trajectory. You have SOI alarms and Atmosphere alarms set up to automatically trigger. You're futzing around on your Minmus base and Ping! You get an alarm. Jool SOI encounter. You "Jump To" it and follow the ship through the SOI. The moment the ship goes through the SOI, you get a new alarm for the atmosphere encounter.Will an altitude alarm work? Sure. This would just be more convenient and smooth. Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted October 26, 2015 Author Share Posted October 26, 2015 The altitude alarm does not do it automatically. Imagine you've a ship heading to Jool with an aerobrake already on your trajectory. You have SOI alarms and Atmosphere alarms set up to automatically trigger. You're futzing around on your Minmus base and Ping! You get an alarm. Jool SOI encounter. You "Jump To" it and follow the ship through the SOI. The moment the ship goes through the SOI, you get a new alarm for the atmosphere encounter.Will an altitude alarm work? Sure. This would just be more convenient and smooth.thanks, was missing that automatic step in my head. I'll have a fiddle here with adding auto alarms if the flight path intersects the atmosphere on a body Quote Link to comment Share on other sites More sharing options...
Superfluous J Posted October 26, 2015 Share Posted October 26, 2015 thanks, was missing that automatic step in my head. I'll have a fiddle here with adding auto alarms if the flight path intersects the atmosphere on a bodySweet! One potential problem, it'd trigger as you're rising from the surface and just cross the atmo boundary, unless you somehow limit it to only count when you're in space. Quote Link to comment Share on other sites More sharing options...
Wcmille Posted October 27, 2015 Share Posted October 27, 2015 Everything works great, but the alarm sounds don't seem to work for me. Ideas on troubleshooting? Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted October 27, 2015 Author Share Posted October 27, 2015 Sweet! One potential problem, it'd trigger as you're rising from the surface and just cross the atmo boundary, unless you somehow limit it to only count when you're in space.hehe, good point, will keep that in mindEverything works great, but the alarm sounds don't seem to work for me. Ideas on troubleshooting?I'd suggest trying to play the sounds from the settings and checking the logs for any errors. Feel free to share your log file - if you need help locating it then there are somegood tips in this post - http://forum.kerbalspaceprogram.com/threads/92229-How-To-Get-Support-%28READ-FIRST%29?p=1380976&viewfull=1#post1380976 Quote Link to comment Share on other sites More sharing options...
Supermarine Posted October 30, 2015 Share Posted October 30, 2015 Hello!I'm having a problem with Kerbal Alarm Clock. Everything works fine and looks good but the warp option.No matter how I configure it; the alarm goes off and a message appears, but no sound and---most importantly---the warp is not automatically stopped. This has caused my ships to miss some transfer windows. I already tried reinstalling and deleting the folder and installing again. I'm using the latest version. With previous one this did not happen, but I started to notice recently because of new savegame.Could this be a bug? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
BlackHat Posted October 30, 2015 Share Posted October 30, 2015 Hmm, any chance of getting a little x in the upper right corner of the KAC window to close it? Its annoying having to go back to the toolbar to click the icon to close it. Quote Link to comment Share on other sites More sharing options...
Kobymaru Posted October 30, 2015 Share Posted October 30, 2015 Can the Altitude alarm not do this already? set to the edge of atmosphere for the target, or am I thinking of something else?I didn't know there was an altitude alarm. And to figure out what it was, I had to Ctrl-F your OP, and it turns out it's "target distance"-alarm, which does not seem very obvious to me.Is it possible to somehow make it more prominent? Quote Link to comment Share on other sites More sharing options...
NoSyMe Posted November 3, 2015 Share Posted November 3, 2015 I just started using Kerbal Alarm Clock and already love it. Thx for making it! Quote Link to comment Share on other sites More sharing options...
synalx Posted November 6, 2015 Share Posted November 6, 2015 Hey - has anyone seen issues with KAC where only the first alarm counts down? This is driving me nuts right now.I think it might be related to EPL build alarms that get automatically added and removed. Quote Link to comment Share on other sites More sharing options...
Funky Dare Devil Posted November 9, 2015 Share Posted November 9, 2015 Mod works great for me, except when I try to use it to calculate transfer windows to any of the planets contained in the outer planets mod (Sarnus, Urlum, Neidon, and Plock). All I get for each of them is a "no future model data" message under the "time to transfer" column. Anyone else experience this issue? Quote Link to comment Share on other sites More sharing options...
Shisouka Posted November 11, 2015 Share Posted November 11, 2015 So no bugs reported means this will just run fine under 1.0.5? Quote Link to comment Share on other sites More sharing options...
razark Posted November 11, 2015 Share Posted November 11, 2015 So no bugs reported means this will just run fine under 1.0.5? I haven't seen any issues.Try it out and see if it works. If it doesn't, just uninstall it. Quote Link to comment Share on other sites More sharing options...
Alshain Posted November 11, 2015 Share Posted November 11, 2015 Working fine for me. Quote Link to comment Share on other sites More sharing options...
Wjolcz Posted November 11, 2015 Share Posted November 11, 2015 Seems like deleting KAC and trying to play 1.0.5 without it crashes the game a lot, so don't do that. Quote Link to comment Share on other sites More sharing options...
smjjames Posted November 12, 2015 Share Posted November 12, 2015 Maybe I'll hold off a little before putting it into the gamedata folder then. Quote Link to comment Share on other sites More sharing options...
Wjolcz Posted November 12, 2015 Share Posted November 12, 2015 Maybe I'll hold off a little before putting it into the gamedata folder then.It should work fine. It's just that if you have a pre-1.0.5 save with KAC alarms, they might crash your game. It's silly but I think that's what is happening to me. Quote Link to comment Share on other sites More sharing options...
smjjames Posted November 15, 2015 Share Posted November 15, 2015 (edited) It should work fine. It's just that if you have a pre-1.0.5 save with KAC alarms, they might crash your game. It's silly but I think that's what is happening to me.Okay then.Edit: I'm periodically getting this exception, looks like something related to VOID, which I don't have.11/15/2015 4:54:09 PM,KerbalAlarmClock,Searching for VOID(Filename: C:/buildslave/unity/build/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 56)11/15/2015 4:54:09 PM,KerbalAlarmClock-VOIDWrapper,Attempting to Grab VOID Types...(Filename: C:/buildslave/unity/build/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 56)NullReferenceException: Object reference not set to an instance of an object at KerbalAlarmClock.KerbalAlarmClock.UpdateDetails () [0x00000] in <filename unknown>:0 at KerbalAlarmClock.KerbalAlarmClock.RepeatingWorker () [0x00000] in <filename unknown>:0 at KSPPluginFramework.MonoBehaviourExtended.RepeatingWorkerWrapper () [0x00000] in <filename unknown>:0 (Filename: Line: -1)NullReferenceException: Object reference not set to an instance of an object at KerbalAlarmClock.KerbalAlarmClock.UpdateDetails () [0x00000] in <filename unknown>:0 at KerbalAlarmClock.KerbalAlarmClock.RepeatingWorker () [0x00000] in <filename unknown>:0 at KSPPluginFramework.MonoBehaviourExtended.RepeatingWorkerWrapper () [0x00000] in <filename unknown>:0 (Filename: Line: -1) Edited November 16, 2015 by smjjames Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted November 16, 2015 Author Share Posted November 16, 2015 I'm working the KER issue atm, so will also check on that one too - I dont thnk its void related as thats all well wrapped with error handling, and not done in the UpdateDetails method. I assume its happening when you change scenes yes? Also looking at the 1.0.5 stuff Quote Link to comment Share on other sites More sharing options...
Fwiffo Posted November 18, 2015 Share Posted November 18, 2015 [quote name='TriggerAu']I'm working the KER issue atm, so will also check on that one too - I dont thnk its void related as thats all well wrapped with error handling, and not done in the UpdateDetails method. I assume its happening when you change scenes yes? Also looking at the 1.0.5 stuff[/QUOTE] Hi TriggerAu, Love your mods. Looking forward to the pending KAC update. Have there been any other 1.0.5 issues reported, aside from trouble loading pre-1.0.5 savegames that have Kerbal Alarm Clock alarms set? What's the KER issue? Something to do with Kerbal Engineering Redux? Cheers! Quote Link to comment Share on other sites More sharing options...
smjjames Posted November 18, 2015 Share Posted November 18, 2015 [quote name='TriggerAu']I'm working the KER issue atm, so will also check on that one too - I dont thnk its void related as thats all well wrapped with error handling, and not done in the UpdateDetails method. I assume its happening when you change scenes yes? Also looking at the 1.0.5 stuff[/QUOTE] It mostly happens when launching from the editor, and possibly launching from KSC view. So, yeah, some scene changes but not all. Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted November 18, 2015 Author Share Posted November 18, 2015 K ta, I'll look in there when I get the KEr thing nailed Quote Link to comment Share on other sites More sharing options...
ultrasquid Posted November 24, 2015 Share Posted November 24, 2015 I hope the revision is going well. My program is lost without Kerbal Alarm Clock. Good luck; safe travels. Quote Link to comment Share on other sites More sharing options...
Dweller_Benthos Posted November 25, 2015 Share Posted November 25, 2015 [quote name='DunaticFringe']I had a contract to plant flag on the Mun. Already did it before, but contract came afterwards. No problem with the mission. It was the first time using a two-seat lander on the Mun. Nice compact design with at least 350dV after landing and returning to orbit. Was able to get around 550 science so I was able to unlock more parts. [/QUOTE] That's pretty cool, and nice screenshots, but what does it have to do with Kerbal Alarm Clock? Did you use it to plan your Munar injection burn? Quote Link to comment Share on other sites More sharing options...
DunaticFringe Posted November 25, 2015 Share Posted November 25, 2015 [quote name='Dweller_Benthos']That's pretty cool, and nice screenshots, but what does it have to do with Kerbal Alarm Clock? Did you use it to plan your Munar injection burn?[/QUOTE] Oops!! I just noticed that I posted in the wrong thread. I wanted to post in the "What did you do in KSP today?" thread. Thanks for letting me know. Post moved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.