Jump to content

What did you do in KSP1 today?


Xeldrak

Recommended Posts

Testing the Duna Buggy on the Mun first, and going on some sweet jumps. It needs pegs now. :D


This is going to be on phase one to Duna, the first time I have been to Duna in this career game actually. Phase one will send a wideband scanner sat, narrowband scanner sat, this buggy, a descent/ascent lander, and a orbital hab/pusher/return vehicle. Should be fun. :huh: Goal is to find the loots, mark it for phase two, and get these guys returned for some XP. Science tree is maxxed... soo...

JIyNFM6.jpg

^ pegs installed on Mark 2 :confused:

Edited by oversoul
Link to comment
Share on other sites

Severely crashed my low-level workhorse atmospheric science platform (A small plane with some thermometers on it) while collecting data for a contract...

I went into the map to activate navigation to the next data site, and I guess i was much closer to the ground than I thought!

The only remaining parts of the plane were:

*1 wing segment

*1 simple steerable landing gear

*1 Mk1 Cockpit

*1 Thoroughly freightened Joncan Kerman

At least he survived!

Link to comment
Share on other sites

So, after an absence do to work and a 6 month old I finally made it to Minmus and back, with my newly designedish flag, can you guess where it is from and if someone else has already done the same flag, oops, and can someone tell me how to change the flag on the flag poles around the space center?

Anyhow got some serious science around Minmus, landed, flagged it, and finished a tourist contract there as well.

Need to work on my landings on these RoveMax M1s I popped one somehow.

Might just do legs and retract to ground.

7C47F56DE0E911BC8B71B5988849F4AA5F6C1F45

DADEB02DAC06F94FEC57D7DBDB24E2934701C7B9

951ECC8426966F165BB7BFEFA0F39C37E3FF4B91

F916808D1F6EE44DD1F0076FE782B9F366A759DF

A3EDD0076745C728BDF5A30E3C30D7CFE1AA62CF

FCC6FE36BFED3A21EB25EAE6E42BEA7243D051A8

CE06693DBE21A66DBBD1696178EF69CAA7A0A247

Love the little details of this game.

858A83EC926824DADAC385BC68262F745AF9E027

B88875399C011B6B83C93CA958DE4975AA58F1F7

58562010E5443075CD81624A2D82213966CEAD64

D80FC6818D9974E27861084CCDF4AB45D8E2B3E5

Link to comment
Share on other sites

Over the weekend, completed my un-Kerballed exploration of all Mun biomes (though the canyons took a couple of extra tries before I managed to find a flat place to land), had a rover blow up on me for some reason (it was on autopilot and I was looking away at the time, so I'm not sure why; but I suspect instability), did my first flyby of Moho, and launched the B612 probe toward Eve orbit.

Currently experimenting with ways to deliver rovers without breaking the wheels upon landing...

Edited to add: I forgot that I also managed a probe-rescue mission... one of my Munar probes made it back to Kerbin orbit but without enough delta-V to re-enter. I launched a probe with a Klaw that grabbed it, decelerated enough to get the original probe to re-enter, and released... voila! :)

Edited by MaxwellsDemon
Additional comment
Link to comment
Share on other sites

Currently experimenting with ways to deliver rovers without breaking the wheels upon landing...

I'm not sure if this helps but it might be helpful to have a detachable pallet under it to absorb the shock of landing, or have the rover slow its own descent by the use of RCS thrusters. How large is your rover?

Link to comment
Share on other sites

Currently experimenting with ways to deliver rovers without breaking the wheels upon landing...

Landing legs (depending on size of the rover) are a huge help on this. My mun train (few pages back) each car had landing legs because of this same problem, even at a low landing speed like 1.3m/s I was flattening wheels and despite having engineers at the ready to fix them... weird things happen on the mun.

There is always also landing gear. Put the small landing gears on your rover and land on those wheels, then raise the gear and off you go, it gets a little ugly if you are forced to use the medium gears though.

If you don't mind mods Kerbal Foundries mod has some great rugged wheels, I don't care for them much myself because of issues I have with the torque. I don't like slowly accellerating and when a wheel makes a 25 ton rover pop a wheellie on Kerbin you know it will be trouble on Mun.

Link to comment
Share on other sites

I built a shuttle capable bringing a full orange tank to LKO.

Got angry because the new Bandicam messes up the audio track.

Still managed to record my orbital speed run. Which was fun :)

I was slightly bored and noticed ShadowZone challenged others in his video! Never done any sort of a challenge in KSP before but this was kinda fun. I went with pretty much my first idea for the craft tho, so there must be alot faster ways to do this still.

OK... back to career then. Got an interplanetary comms network to build.

Link to comment
Share on other sites

I decided not to pick up any contracts for new missions until I had some Duna arrivals.

With the faster time progression(skipping up to 20 days one time), I managed to get my first asteroid capture mission completed, then discovered that if you have an asteroid Klawed, you cannot mine any other object.(had my drills going down into the Mun, and even when I pulled up the landing gear for deeper penetration(not required previously) the only 'start extraction' option I had was Asteroid extraction, and it kept saying no contact.

Putting the legs back down and dropping the asteroid let me finally fill up the tanks. Grabbed back up the asteroid and now that ship is running around the Kerbin SOI to collect all the different Asteroid samples it can.(it is an old 1.0.2 design, so it can't reenter safely, let alone with an asteroid in tow. Might send up a heat-shield/parachute just to bring down the asteroid as a trophy though, perhaps a pod to store the science in too)

My Duna ScanSat/Resource scanner probe captured at Duna with a little over 1km/s and has scanned the planet and is now in a somewhat inclined orbit letting me scan most of the non-polar regions in preparation for my manned missions(should probably go scan Ike too, but I figure I can wait for the refuel before getting tricky with orbits as I only really have practice with low-orbit intercepts)

Got my second asteroid mission captured at Kerbin and headed to the Mun for mission completion/sample collection

My second manned Duna mission arrived at the Duna SOI(this one benefited from a mystery thrust before leaving the Kerbin SOI cutting it's 210 day transit to 160 days, so it is arriving a few weeks before the earlier mission)

After mu initial Duna SOI science collection, I discovered that my low Ike retro-burn apparently drifted to be inside Ike, corrected that a bit and performed first retro-burn. Problem, only ~ 5 minutes to refine the ~2500 fuel needed for the Low Duna retro-burn, further problem, I am in Ike's shadow meaning my engine is my only power source for refining more fuel.

Note: had ~1700 ore, but only a 2500 fuel tank. Initial tank had ~1.9km/s d-v but needed more than 3km/s to stay in the Duna SOI.

Attempt 1: started burn early and kept refining fuel, but to no avail

Attempt 2: Burned sideways to get out of Ike's shadow. Helped, but still not enough time to refine fuel for burn. Made named save game in case this is the best option(a while after passing Duna and still trying not to leave the SOI)

Attempt 3: Aerocapture, Everything outside of the Mk3 components exploded, including the engines and most of the solar panels, still did not prevent leaving SOI

Attempt 4: Found a saved game right after initial science collection, did 1km/s retro-burn immediately and re-calculated braking burns. Was able to re-top fuel before burn 1km/s in Ike's SOI, and with the better fuel efficiency managed to have a good 200m/s d-v worth of fuel for the Duna burn over and above what was needed for an orbit inside Ike's orbit. Finished off the Ore during first orbit and went down to LDO (50x52, so just above the atmosphere) with ~1200 d-v left @ ~900m/s).

After collecting all the data I could, I made sure Had the game saved and made a landing attempt. Closed Gigantors and radiators, opened air-brakes then burned down about 600m/s. Watched parachutes closely and opened several that the engineer could get to fairly easily to re-pack once they were down to Risky. Managed to land without any breakages with a good 180m/s d-v left and deployed drills to start re-filling(don't think I can take off if completely full, but I can sure mine to get a full fuel tank and some reserve ore).

next step: get all the Kerbals out to get flag XP, get enough fuel+ore to get TWR down to ~1.2 and then decide if it is time for biome hopping(I have lots of empty nodes in the community tech-tree to unlock), Scansat refuel(so it can scan the poles and also scan Ike), or a trip to Ike.

This was my first Career Duna landing, with my only previous Duna mission arrival in a 0.90 sandbox game(I *think* I landed, not sure) that barely had enough d-v to a Kerbin fly-by outside the orbit f Minmus.

Link to comment
Share on other sites

After all te huge stuff posted on the previous pages, this is going to look pretty silly:

HOxM2i4h.png

There is method in my madness though. It has enough dV to take a kerbal cheaply from LKO to Mun orbit and rendezvous at each end.

And it fits in to the Mk2 cargo bay of my stretched 'Hotdog' SSTO:

KBuQ7rJh.png

There are parachutes in case an emergency re-entry is needed. The ship breaks up on impact but the pilot survives.

Now I must get back to my Mk3 SSTO.

Focus... focus...

Link to comment
Share on other sites

I'm not sure if this helps but it might be helpful to have a detachable pallet under it to absorb the shock of landing, or have the rover slow its own descent by the use of RCS thrusters. How large is your rover?

The trouble I've had is trying to get the rover off the pallet after landing.

The rover's as small as I can make it.. a RoveMate with six RoveMax S2 wheels-- one pair at midbody, and the front and rear extended on outriggers using a couple of little "cubic octagonal" struts to lengthen the wheelbase, battery packs slung under the vehicle to keep the COG low, and every available surface plastered with solar panels (apart from the scientific instruments). Basically my attempt at a "Sojourner."

On my first go-around, I put it on top of a small strut with a TR-2V decoupler, on top of a heat shield, put a parachute on top, and lobbed it into a short suborbital flight from KSC to test it. It survived landing fine, but then the rover couldn't get off the heat shield. Removing the strut placed the wheels in contact with the heat shield, and evidently enough of a shock gets transmitted through to break the wheels... same when I put a 2x2 panel under the rover and ejected the heat shield before landing.

My fourth attempt, which I'll be trying this evening, is going for more of a skyhook arrangement, with the small strut and TR-2V on top, with the rover hanging from it, with the landing legs, etc., around it like a "garage."

I hadn't thought of simply putting landing legs on the rover and then retracting them. Another thing to try...

(I don't doubt this problem has been solved many times over... but I'm trying to go easy on looking over other peoples' shoulders except when I'm truly stumped. :wink: )

Edited by MaxwellsDemon
Link to comment
Share on other sites

Landing legs (depending on size of the rover) are a huge help on this. My mun train (few pages back) each car had landing legs because of this same problem, even at a low landing speed like 1.3m/s I was flattening wheels and despite having engineers at the ready to fix them... weird things happen on the mun.

I'll give the wheels-and-legs solution a try, too. Thanks!

Link to comment
Share on other sites

Just some experimenting. I call it Mirage

be36f6ccd6a7.png

Still has some balancing issues, but it got to orbit

386981e0f219.png

Reentry was... well, I specially made it too steep and still nothing burned up!

1c12e9b7730c.png

And then I almost crashed into runway. Still getting used to the aerodynamics.

6a558f23d52c.png

Link to comment
Share on other sites

This:

PART{
name = MagnesiumCell
module = Part
author = RoverDude

MODEL
{
model = Squad/Parts/Resources/FuelCell/FuelCell
}
rescaleFactor = 0.75

node_attach = .06, 0, .03, 1, 0, 0, 0

TechRequired = electrics
entryCost = 2250
cost = 750
category = Utility
subcategory = 0
title = MgO Cell
manufacturer = Zaltonic Electronics
description = A tiny fuel cell that uses Magnesium oxide for power generation.
attachRules = 0,1,0,0,0

// --- standard part parameters ---
mass = 0.05
dragModelType = default
maximum_drag = 0.2
minimum_drag = 0.2
angularDrag = 2
crashTolerance = 7
maxTemp = 6000 // = 7000


MODULE
{
name = ModuleResourceConverter
ConverterName = Fuel Cell
StartActionName = Start MgO Cell
StopActionName = Stop MgO Cell
FillAmount = 0.95
AutoShutdown = false
GeneratesHeat = false
UseSpecialistBonus = true


INPUT_RESOURCE
{
ResourceName = MagnesiumOxide
Ratio = 0.0023568
FlowMode = STAGE_PRIORITY_FLOW
}
OUTPUT_RESOURCE
{
ResourceName = ElectricCharge
Ratio = 1.7
DumpExcess = false
}
}



RESOURCE
{
name = MagnesiumOxide
amount = 1.43
maxAmount = 1.43
}

And this:

RESOURCE_DEFINITION
{
name = MagnesiumOxide
density = 0.00358
unitCost = 0.008
hsp = 955
flowMode = NO_FLOW
transfer = NONE isTweakable = true

Edited by Xannari Ferrows
Link to comment
Share on other sites

I can't make this thing fly, it's getting me mad. . . .

I think you should replace the multiple control surfaces with just lifting surfaces (but keep one set of control surfaces). I don't think your tail fin needs any control surfaces. Its hard to tell what there is on the ventral side of the plane, but you might not have enough air intakes relative to the jets. No way to see landing gear placement.

Is that a cargo bay behind the cockpit? If so, I'm guessing the payload is somewhat massive.

Good luck!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...