Jump to content

PorkWorks dev thread [Habitat Pack] [SpaceplanePlus]


Porkjet

Recommended Posts

Yes, it might be good to have one, however, I see this mk2 system as a medium sized spaceplane thing for 15t-20t or heavier planes and for these, the big fuel tanks are all you'll need. If you wanna go smaller and lighter, the mk1 system should be used. Theres only a few cases where I personally wished for a shorter tank version such as radial attached tanks. You can also use a small cargobay and put a rocket fuel tank in it.

Or what do you think?

Guess I will make a short one sooner or later, but the part request list is pretty long and I wanna avoid the so called 'part bloat'

Link to comment
Share on other sites

Yes, it might be good to have one, however, I see this mk2 system as a medium sized spaceplane thing for 15t-20t or heavier planes and for these, the big fuel tanks are all you'll need. If you wanna go smaller and lighter, the mk1 system should be used. Theres only a few cases where I personally wished for a shorter tank version such as radial attached tanks. You can also use a small cargobay and put a rocket fuel tank in it.

Or what do you think?

Guess I will make a short one sooner or later, but the part request list is pretty long and I wanna avoid the so called 'part bloat'

I'm finding that my designs from these parts tend to be slightly heavier and larger than they would be but for the missing half-length tanks. I'm loving the cockpit and the shock cones are marvelous, but I'm obtaining orbit with too little fuel and too much oxidizer. I'd rather not play too much with tweakables. I tend to add outboard LFO tanks to both give me places to mount air intakes, and to keep the CoM where it should be. If my 25 ton spaceplane could be a 20 ton spaceplane, I could ditch the extra oxidizer...

However: I'm with you on the "part bloat." Let's keep the number of parts modest. So don't consider mine a firm request. It would be awesome, certainly. If you do it, I'd be happy. If you don't, I won't mind. Still, this is a fabulous mod. Can't wait to see the IVAs, which, given your habitat work, will also be awesome.

Link to comment
Share on other sites

The advantage of a half-sized fuel tank would be that they would allow you to create full-length parts out of two half-length parts, such as the small cargo bay or the stubby adapter. Without a half-length fuel tank the smaller ones annoyingly stick out in certain situations.

Link to comment
Share on other sites

I absolutely love these MK2 Spaceplane parts! I built a Space Shuttle type craft with them, and thought I would share!

Sorry for lots of pictures. :(

EDIT: came back and added spoiler :)

1%20On%20The%20Launchpad.png

On The Launchpad

2%20Liftoff.png

Liftoff

3%20Moving%20On.png

Moving On

4%20Getting%20Higher.png

Getting Higher

5%20SRB%20Seperation.png

SRB Separation

6%20Gravity%20Turn.png

Gravity Turn

7%20Going%20For%20It.png

Going For It

8%20On%20Orbit%20Operations.png

On Orbit Operations

9%20Docked%20to%20Station.png

Docked To Station

10%20Docked%20to%20Station%20%2ADifferent%20Angle%2A.png

Docked To Station *Different Angle*

11%20De-Orbit%20Burn.png

De-Orbit Burn

12%20Preparing%20for%20Re-Entry.png

Preparing For Re-Entry

13%20Re-Entry%20Underside.png

Re-Entry Underside

14%20Flames%20for%20Days.png

Flames For Days

15%20Sonic%20Boom.png

Sonic Boom

16%20Coming%20Around%20the%20HAC%20.png

Coming Around The HAC

17%20Coming%20in%20for%20Landing.png

Coming In For Landing

18%20Safe%20and%20Sound.png

Safe And Sound

Edited by bigdad84
Link to comment
Share on other sites

I absolutely love these MK2 Spaceplane parts! I built a Space Shuttle type craft with them, and thought I would share!

Sorry for lots of pictures. :(

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/1%20On%20The%20Launchpad.png

On The Launchpad

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/2%20Liftoff.png

Liftoff

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/3%20Moving%20On.png

Moving On

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/4%20Getting%20Higher.png

Getting Higher

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/5%20SRB%20Seperation.png

SRB Separation

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/6%20Gravity%20Turn.png

Gravity Turn

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/7%20Going%20For%20It.png

Going For It

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/8%20On%20Orbit%20Operations.png

On Orbit Operations

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/9%20Docked%20to%20Station.png

Docked To Station

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/10%20Docked%20to%20Station%20%2ADifferent%20Angle%2A.png

Docked To Station *Different Angle*

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/11%20De-Orbit%20Burn.png

De-Orbit Burn

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/12%20Preparing%20for%20Re-Entry.png

Preparing For Re-Entry

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/13%20Re-Entry%20Underside.png

Re-Entry Underside

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/14%20Flames%20for%20Days.png

Flames For Days

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/15%20Sonic%20Boom.png

Sonic Boom

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/16%20Coming%20Around%20the%20HAC%20.png

Coming Around The HAC

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/17%20Coming%20in%20for%20Landing.png

Coming In For Landing

https://dl.dropboxusercontent.com/u/110487080/KSP%20Forum/Mk2%20Space%20Plane/18%20Safe%20and%20Sound.png

Safe And Sound

Why didn't you uploaded it on imgur? You can even integrate an imgur-album smoothly and thus your post would be much shorter :)

oh and nice shuttle by the way :)

Link to comment
Share on other sites

Why didn't you uploaded it on imgur? You can even integrate an imgur-album smoothly and thus your post would be much shorter :)

oh and nice shuttle by the way :)

Thanks! :) and I've always been kind of leery about using Imgur. Another account I have to maintain. I seen that spoilers were working for awhile there, but they aren't anymore?

Link to comment
Share on other sites

Thanks! :) and I've always been kind of leery about using Imgur. Another account I have to maintain. I seen that spoilers were working for awhile there, but they aren't anymore?

I think spoilers work again.

And you can log in through accounts with other services like Google, Yahoo, Twitter or Facebook if you use those.

Link to comment
Share on other sites

Could you add one more hatch/ window on the next side of the MK2 cockpit?

I love symmetric XD

Also, could you make a MK2 inline docking port like the stock MK1 version?

Hull-mounted_clamp-o-tron.jpg

Edited by royying
Link to comment
Share on other sites

Thanks! :) and I've always been kind of leery about using Imgur. Another account I have to maintain. I seen that spoilers were working for awhile there, but they aren't anymore?

You don't need an account to post to Imgur, only if you want to go back an edit/delete old things you've posted, or build karma

Link to comment
Share on other sites

Just wanted to surface again and thank you Porkjet for these excellent models. I tend to remove the lift, but other than that I'm only really missing an inline docking port (and maybe a Mk2 style SAS unit). For now, I use the small cargo bay combined with acstock inline docking port to get the desired effect. The upside of that method is that I can also hide RTGs, batteries, extra RCS, additional fuel, and solar panels. The downside is that there's not quite as much clearence when deploying the cargo bay and the stock inline port. It works well enough though.

So, once again, cheers and many thanks!

Link to comment
Share on other sites

Just wanted to surface again and thank you Porkjet for these excellent models. I tend to remove the lift, but other than that I'm only really missing an inline docking port (and maybe a Mk2 style SAS unit). For now, I use the small cargo bay combined with acstock inline docking port to get the desired effect. The upside of that method is that I can also hide RTGs, batteries, extra RCS, additional fuel, and solar panels. The downside is that there's not quite as much clearence when deploying the cargo bay and the stock inline port. It works well enough though.

So, once again, cheers and many thanks!

That makes me wish we had extending docking ports, like this: 300px-Passive_and_active_NDS..png

Link to comment
Share on other sites

That docking port is only extended when it capture the other object (right picture). After the capture, the docking ring is pulled back and seal itself, like the picture to the left.

Link to comment
Share on other sites

OK, possible issue...

I just added the latest update to the Spaceplane+ pack, and now I can't add an inline docking port to the cargo bays or attach it to any nodes of the SP+ pack. It still surface attaches just fine. This is only occurring with the new pack.

Link to comment
Share on other sites

After the ARM update I can't seem to open or close the cargo bay of the Mk2 extension pack. Not in-game or in SPH/VAB.

Either you're missing the Firespitter plugin (FSAnimateGeneric to be precise) or the Firespitter plugin is not compatible with 0.23.5. (which probably just means it needs recompiling for 0.23.5)

Yup that's it. You just need the Firespitter plugin and you're Good To Go. Works fine in 0.23.5

Edited by Starwaster
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...