Jump to content

[WIP][TechTree @ 0.23.5] - [MS19e] - Realistic Progression LITE


MedievalNerd

Recommended Posts

I'll do my best to do the last hotfix to MS19 (f) this weekend. This before getting ready to sprint into MS20. Which should include 2 new major features:

* First Manned Experiments (Mercury & Gemini)

* Photo & Video Experiment Plugin (For later impact probes.)

And it should be somewhere in there time to make an installation video, which I'll be working out the details with Nathan tonight most likely.

Thanks for all your feedback and support!

Stay tuned!

Link to comment
Share on other sites

Yes, sorry it's taking forever. Things ramped up at my work, so trying to even out things before jumping back in.

Bit of a vain moment here, I finally got to see my name in the credits of Watch_Dogs! I'm part of one of the studios that worked with Ubisoft for the localization & Audio production! Woot!

Don't worry, my comment wasn't meant to be criticism, it was just a reminder to be patient. As for the second info... congratulations! :) Its nice to see ones work being appreciated! I will probably never play Watch_Dogs, too much hecticness from what I have seen so far. I loved Uplink when it came out, it had its moments where one had to be fast, but it was much more in the direction of acting in the shade. (sorry for being off topic)

I'll do my best to do the last hotfix to MS19 (f) this weekend.

And it should be somewhere in there time to make an installation video, which I'll be working out the details with Nathan tonight most likely.

Thanks for all your feedback and support!

Stay tuned!

Contrary to the other voices here, I dont like an installation video. I prefer text to be honest. I was planing on doing a creatig a graph where each node is an installation step and each edge represents a logical connection that you have to follow in order to get a working install. But I will do the graph ealiest with the next complete install of RPL I do, so I can create the graph in parallel with my install process.

On that note, anybody tried to use KSP Mod Admin for RPL? I might also try to use it for my next complete install..

Link to comment
Share on other sites

As we talked about SCANsat being integrated into RPL, I was surprised that it kind of already was in there. I made the test and launched 2 5T lifters with 3 satellites each. The probes used the 0.5T cubic computer cores for bacterial experiments. The first were 3 low earth altitude mapping satellites and the other 3 high altitude mapping satellites. Both launches were in a polar orbits. The low quality altitude map turned out to not need 3 satellites, that was overkill, but the high altitude (orbit at 7500 km) worked quite well that way. It took 26 kerbin days (so almost 1 week earth time) to map 99.9% of the world. At 1000x speed, that were a bit more than 30 min watching some orbital ballet. To be honest, after these launches, it was quite good to sit back and see everything working so nicely. To me, that is totally acceptable. If I launch a satellite to an other world, with just one mapping gismo, well, that might be a bit painful. Would be nice if the maps would give more than 20 science though. Thats kind of lame for such an afford.

LnjDewr.png

Cheers,

Semmel

Edited by Semmel
Link to comment
Share on other sites

Why do use kerbin days (6h) on RSS where days are 24h, you know you can change that in the settings from main menu? :D

And what comes to SCANsat, i wonder where the biome scanner has been 'hidden', three others are open already, hmmm...

Link to comment
Share on other sites

Why do use kerbin days (6h) on RSS where days are 24h, you know you can change that in the settings from main menu? :D

Ohh thx.. I tried to change that in game but didnt find the option.. I forgot to take a look at the settings menu. I fixed that :)

And what comes to SCANsat, i wonder where the biome scanner has been 'hidden', three others are open already, hmmm...

Lets wait until MedievalNerd sorts them out. Give the man some slack ;-)

Link to comment
Share on other sites

After completing all the LEO probes and setting up a communication network, I'm getting ready for my first manned orbital launch (Mercury-Atlas). I've noticed I don't have the LR-89 engine available, is this intended? If so, am I supposed to use one of the German/British engines in its place?

Link to comment
Share on other sites

I'll do my best to do the last hotfix to MS19 (f) this weekend. This before getting ready to sprint into MS20. Which should include 2 new major features:

* First Manned Experiments (Mercury & Gemini)

* Photo & Video Experiment Plugin (For later impact probes.)

I know this is kinda small, but could you also add the FTX-2 External Fuel Duct to an earlier rocket tech? I notice it is one of the last things to be unlocked, and I feel it should be unlocked in the 1972+ rocketry era. The first use I can find of a Fuel Line is on the STS launch vehicle, with concepts showing an external tank design as early as 1969. Before it was retired, an umbilical cord was used to transport fuel from the External Tank to the Orbiter during launch.

Link to comment
Share on other sites

hi, I'm sorry if this has been discussed before but I do believe I did everything instructed on the first post but it seems that when I load my game, it seems to load everything but then it gets stuck on a black screen with the little loading icon at the bottom right constantly running but it never brings me to the main screen.

Link to comment
Share on other sites

Sickboy: Is this your first time using RSS? If yes, then let it run for at least 45 minutes (obviously, I recommend doing it in windowed mode). It will look like it's frozen, but it should in fact be doing something (you can check that in the KSP.log file, it gets updated once every five or so minutes). RSS can take a lot of time to "recreate" the planets on the first start-up, especially if you use the config with planet factory.

Link to comment
Share on other sites

after waiting 1 hour, the log still hasn't updated since. I also notice a lot of things by the end of the log that seem like errors. here those are, in case those can help:

[LOG 15:15:08.771] PartLoader: Compiling Internal Space 'FASA/Spaces/LM_Interior/internal/FASAAscentStageInterior'

[ERR 15:15:08.784] InternalCameraSwitch: cameraTransform 'WindowEyeTransform' is null

[ERR 15:15:08.785] InternalCameraSwitch: colliderTransform 'WindowFocusPoint' is null

[LOG 15:15:08.957] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/b9-m27-remade-internal/B9_Cockpit_M27_InternalRPM'

[ERR 15:15:08.961] PartCompiler: Cannot clone model 'B9_Aerospace/Spaces/B9_Cockpit_M27_Internal/model' as model does not exist

[ERR 15:15:08.963] PartCompiler: Model was not compiled correctly

[LOG 15:15:08.964] LoadInternalPart 'JSI/RasterPropMonitor/Example/b9-m27-remade-internal/B9_Cockpit_M27_InternalRPM' FAILED: Cannot find model

[LOG 15:15:08.966] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/b9-mk2-remade-internal/B9_Cockpit_MK2_InternalRPM'

[ERR 15:15:08.968] PartCompiler: Cannot clone model 'B9_Aerospace/Spaces/B9_Cockpit_MK2_Internal/model' as model does not exist

[ERR 15:15:08.971] PartCompiler: Model was not compiled correctly

[LOG 15:15:08.972] LoadInternalPart 'JSI/RasterPropMonitor/Example/b9-mk2-remade-internal/B9_Cockpit_MK2_InternalRPM' FAILED: Cannot find model

[LOG 15:15:08.974] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/b9-s2-remade-internal/B9_Cockpit_S2_InternalRPM'

[ERR 15:15:08.977] PartCompiler: Cannot clone model 'B9_Aerospace/Spaces/B9_Cockpit_S2_Internal/model' as model does not exist

[ERR 15:15:08.978] PartCompiler: Model was not compiled correctly

[LOG 15:15:08.980] LoadInternalPart 'JSI/RasterPropMonitor/Example/b9-s2-remade-internal/B9_Cockpit_S2_InternalRPM' FAILED: Cannot find model

[LOG 15:15:08.981] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/cupola-remade-internal/cupolaInternalRPM'

[LOG 15:15:09.271] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/mk1-remade-internal/mk1PodCockpitRPM'

[LOG 15:15:09.572] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/mk12pod-remade-internal/PodCockpitRPM'

[LOG 15:15:10.609] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/mk1cockpit-remade-internal/mk1CockpitInternalRPM'

[LOG 15:15:10.901] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/mk1lander-remade-internal/landerCabinSmallInternalRPM'

[LOG 15:15:11.283] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/mk2-sh-cockpit-remade-internal/SH_mk2CockpitInternalRPM'

[ERR 15:15:11.286] PartCompiler: Cannot clone model 'SH_mods/Spaces/SH_mk2CockpitInternal/model' as model does not exist

[ERR 15:15:11.287] PartCompiler: Model was not compiled correctly

[LOG 15:15:11.288] LoadInternalPart 'JSI/RasterPropMonitor/Example/mk2-sh-cockpit-remade-internal/SH_mk2CockpitInternalRPM' FAILED: Cannot find model

[LOG 15:15:11.290] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/mk2-sh-cockpit-remade-internal/mk2CockpitInternal'

[ERR 15:15:11.293] PartCompiler: Cannot clone model from 'JSI/RasterPropMonitor/Example' directory as model does not exist

[LOG 15:15:11.301] LoadInternalPart 'JSI/RasterPropMonitor/Example/mk2-sh-cockpit-remade-internal/mk2CockpitInternal' FAILED: Cannot find model

[LOG 15:15:11.302] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/mk2landercan-remade-internal/landerCabinInternalsRPM'

[LOG 15:15:11.584] PartLoader: Compiling Internal Space 'JSI/RasterPropMonitor/Example/orbital-orb-remade-internal/orbitalOrbInternalsRPM'

[ERR 15:15:11.587] PartCompiler: Cannot clone model 'HabitatPack/Spaces/orbitalOrbInternals/model' as model does not exist

[ERR 15:15:11.588] PartCompiler: Model was not compiled correctly

Link to comment
Share on other sites

Hm, to my admittedly limited knowledge this is not the kind of errors that should freeze the game. Do you have the b9 aerospace mod installed? If not, then it is no wonder that compiling alternative spaces for its pods fails, and it should not freeze the game.

1 hour should definitely be enough for it to finish rebuilding the planets though, I think it took sth like 40 minutes on my computer. And it did update the log, sometimes it took longer than five minutes for an update to appear, but definitely not an hour. I think your best bet would be to describe your situation in more detail (like: which configs you are using, whether it is a fresh install or one on which you have already used some or all of the Realism Overhaul mods, and in the latter case, if they worked) and wait for one of the relevant mods' authors to notice and help you.

PS Just one thought - In case you were using the RSS config with Planet Factory and it was your first time trying it, did you follow the instructions I quote below?

IF YOU ARE NOT USING THE DEFAULT RSS CONFIG
you must delete all OBJ files in GameData/RealSolarSystem/Plugins/PluginData before launching with the new config. Further, KSP will take an extra 15-20 minutes to load the first time while it regenerates models. This is normal. After that, subsequent launches of KSP will be fast.

[EDIT:]

Actually I've realized I've updated the configs today and deleted the old obj files just to be on the safe side, so I have an example of what a correct log looks like. All in all it took 56 minutes for KSP to load, including 5 minutes for normal parts and the texture manager, then 32 minutes for RSS, and 19 minutes of what seems like an inexplicable freeze (judging from the log, I was doing other things in the meantime so no idea how it looked like on the screen). I'm posting the RSS part of the log below:

[LOG 21:52:56.497] *RSS* fixing bodies

[LOG 21:52:56.498] *RSS* InverseScaleFactor = 0.0001666667

[LOG 21:52:56.499] Fixing CB Sun

[LOG 21:52:56.500] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 21:52:56.524] Did CBT for Sun

[LOG 21:52:56.525] Finding PQS Sun

[LOG 21:52:56.536] Finding PQS SunOcean

[LOG 21:52:56.560] *RSS* final scale of Sun in scaledspace: 106.4743

[LOG 21:52:56.560] Fixing CB Moho

[LOG 21:52:56.584] Found CBT for Moho

[LOG 21:52:56.584] Did CBT for Moho

[LOG 21:52:56.585] Finding PQS Moho

[LOG 21:52:56.597] Editing PQS Moho, radius = 2439700

[LOG 21:52:56.598] Rebuilding sphere Moho

[LOG 21:52:56.611] Finding PQS MohoOcean

[LOG 21:52:57.119] *RSS* wrapping ScaledSpace mesh Moho to PQS Moho

[LOG 21:52:57.130] ProfileTimer CopyMesh: 0.007935s

[LOG 21:53:00.683] ProfileTimer MatchVerts: 3.552521s

[LOG 21:54:46.998] ProfileTimer UpdateTangents: 106.305300s

[LOG 21:54:46.999] *RSS* wrapped.

[LOG 21:54:47.562] *RSS*: Done wrapping and exporting. Setting scale

[LOG 21:54:47.563] ProfileTimer WrapSSM_Moho: 110.439800s

[LOG 21:54:47.564] *RSS* final scale of Moho in scaledspace: 1

[LOG 21:54:47.565] Fixing CB Eve

[LOG 21:54:47.566] *RSS* finished with Eve.pressureCurve (35 keys)

[LOG 21:54:47.595] Found CBT for Eve

[LOG 21:54:47.595] Did CBT for Eve

[LOG 21:54:47.596] Finding PQS Eve

[LOG 21:54:47.609] Editing PQS Eve, radius = 6051800

[LOG 21:54:47.610] *RSS* Set offset 0

[LOG 21:54:47.786] Rebuilding sphere Eve

[LOG 21:54:47.809] Found atmo for Eve: Atmosphere

[LOG 21:54:47.810] Atmo updated

[LOG 21:54:48.308] *RSS* wrapping ScaledSpace mesh Eve to PQS Eve

[LOG 21:54:48.316] ProfileTimer CopyMesh: 0.006836s

[LOG 21:54:51.705] ProfileTimer MatchVerts: 3.388702s

[LOG 21:56:39.542] ProfileTimer UpdateTangents: 107.828400s

[LOG 21:56:39.543] *RSS* wrapped.

[LOG 21:56:40.147] *RSS*: Done wrapping and exporting. Setting scale

[LOG 21:56:40.147] ProfileTimer WrapSSM_Eve: 111.835400s

[LOG 21:56:40.148] *RSS* found atmo transform for Eve

[LOG 21:56:40.149] *RSS* final scale of atmo for Eve in scaledspace: 1.035917

[LOG 21:56:40.150] *RSS* final scale of Eve in scaledspace: 1

[LOG 21:56:40.151] Fixing CB Kerbin

[LOG 21:56:40.155] *RSS* finished with Kerbin.pressureCurve (201 keys)

[LOG 21:56:40.158] *RSS* found and loaded temperatureCurve data for Kerbin

[LOG 21:56:40.193] Found CBT for Kerbin

[LOG 21:56:40.194] Did CBT for Kerbin

[LOG 21:56:40.195] Finding PQS Kerbin

[LOG 21:56:40.208] Editing PQS Kerbin, radius = 6371000

[LOG 21:56:40.210] *RSS* Set offset -2150

[LOG 21:56:41.986] Rebuilding sphere Kerbin

[LOG 21:56:42.000] Finding PQS KerbinOcean

[LOG 21:56:42.012] Editing PQS KerbinOcean, radius = 6371000

[LOG 21:56:42.013] Rebuilding sphere KerbinOcean

[LOG 21:56:42.036] Found atmo for Kerbin: Atmosphere

[LOG 21:56:42.037] Atmo updated

[LOG 21:56:43.931] *RSS* final scale of Kerbin in scaledspace: 1.061833

[LOG 21:56:43.932] Fixing CB Mun

[LOG 21:56:43.933] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 21:56:43.957] Found CBT for Mun

[LOG 21:56:43.957] Did CBT for Mun

[LOG 21:56:43.958] Finding PQS Mun

[LOG 21:56:43.970] Editing PQS Mun, radius = 1737100

[LOG 21:56:45.029] Rebuilding sphere Mun

[LOG 21:56:47.759] *RSS* wrapping ScaledSpace mesh Mun to PQS Mun

[LOG 21:56:47.767] ProfileTimer CopyMesh: 0.006836s

[LOG 21:56:51.130] ProfileTimer MatchVerts: 3.361755s

[LOG 21:58:35.245] ProfileTimer UpdateTangents: 104.105900s

[LOG 21:58:35.245] *RSS* wrapped.

[LOG 21:58:35.636] *RSS*: Done wrapping and exporting. Setting scale

[LOG 21:58:35.637] ProfileTimer WrapSSM_Mun: 107.872600s

[LOG 21:58:35.637] *RSS* final scale of Mun in scaledspace: 1

[LOG 21:58:35.638] Fixing CB Duna

[LOG 21:58:35.639] *RSS* finished with Duna.pressureCurve (41 keys)

[LOG 21:58:35.668] Found CBT for Duna

[LOG 21:58:35.668] Did CBT for Duna

[LOG 21:58:35.669] Finding PQS Duna

[LOG 21:58:35.682] Editing PQS Duna, radius = 3396200

[LOG 21:58:35.682] *RSS* Set offset 0

[LOG 21:58:36.030] Rebuilding sphere Duna

[LOG 21:58:36.055] Found atmo for Duna: Atmosphere

[LOG 21:58:36.055] Atmo updated

[LOG 21:58:37.645] *RSS* wrapping ScaledSpace mesh Duna to PQS Duna

[LOG 21:58:37.653] ProfileTimer CopyMesh: 0.007324s

[LOG 21:58:41.358] ProfileTimer MatchVerts: 3.704285s

[LOG 22:00:24.418] ProfileTimer UpdateTangents: 103.050800s

[LOG 22:00:24.419] *RSS* wrapped.

[LOG 22:00:24.830] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:00:24.831] ProfileTimer WrapSSM_Duna: 107.182100s

[LOG 22:00:24.832] *RSS* found atmo transform for Duna

[LOG 22:00:24.833] *RSS* final scale of atmo for Duna in scaledspace: 0.5814533

[LOG 22:00:24.834] *RSS* final scale of Duna in scaledspace: 1

[LOG 22:00:24.835] Fixing CB Bop

[LOG 22:00:24.835] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:00:24.865] Found CBT for Bop

[LOG 22:00:24.865] Did CBT for Bop

[LOG 22:00:24.866] Finding PQS Bop

[LOG 22:00:24.879] Editing PQS Bop, radius = 6100

[LOG 22:00:24.880] Rebuilding sphere Bop

[LOG 22:00:24.892] Finding PQS BopOcean

[LOG 22:00:25.066] *RSS* wrapping ScaledSpace mesh Bop to PQS Bop

[LOG 22:00:25.074] ProfileTimer CopyMesh: 0.007202s

[LOG 22:00:28.266] ProfileTimer MatchVerts: 3.191223s

[LOG 22:02:10.133] ProfileTimer UpdateTangents: 101.858600s

[LOG 22:02:10.134] *RSS* wrapped.

[LOG 22:02:10.580] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:02:10.582] ProfileTimer WrapSSM_Bop: 105.511400s

[LOG 22:02:10.583] *RSS* final scale of Bop in scaledspace: 1

[LOG 22:02:10.585] Fixing CB Gilly

[LOG 22:02:10.586] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:02:10.621] Found CBT for Gilly

[LOG 22:02:10.622] Did CBT for Gilly

[LOG 22:02:10.623] Finding PQS Gilly

[LOG 22:02:10.635] Editing PQS Gilly, radius = 4200

[LOG 22:02:10.636] Rebuilding sphere Gilly

[LOG 22:02:10.648] Finding PQS GillyOcean

[LOG 22:02:10.779] *RSS* wrapping ScaledSpace mesh Gilly to PQS Gilly

[LOG 22:02:10.786] ProfileTimer CopyMesh: 0.007019s

[LOG 22:02:13.925] ProfileTimer MatchVerts: 3.138184s

[LOG 22:03:54.817] ProfileTimer UpdateTangents: 100.883000s

[LOG 22:03:54.818] *RSS* wrapped.

[LOG 22:03:55.206] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:03:55.206] ProfileTimer WrapSSM_Gilly: 104.423800s

[LOG 22:03:55.207] *RSS* final scale of Gilly in scaledspace: 1

[LOG 22:03:55.209] Fixing CB Inaccessable

[LOG 22:03:55.209] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:03:55.238] Found CBT for Inaccessable

[LOG 22:03:55.239] Did CBT for Inaccessable

[LOG 22:03:55.240] Finding PQS Inaccessable

[LOG 22:03:55.252] Editing PQS Inaccessable, radius = 525400

[LOG 22:03:55.253] Rebuilding sphere Inaccessable

[WRN 22:03:55.266] Cannot find preset 'Default' for pqs 'Inaccessable'

[LOG 22:03:55.268] Finding PQS InaccessableOcean

[LOG 22:03:55.292] *RSS* wrapping ScaledSpace mesh Inaccessable to PQS Inaccessable

[LOG 22:03:55.301] ProfileTimer CopyMesh: 0.007690s

[LOG 22:03:58.511] ProfileTimer MatchVerts: 3.209290s

[LOG 22:05:38.289] ProfileTimer UpdateTangents: 99.769590s

[LOG 22:05:38.290] *RSS* wrapped.

[LOG 22:05:38.658] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:05:38.659] ProfileTimer WrapSSM_Inaccessable: 103.362200s

[LOG 22:05:38.659] *RSS* final scale of Inaccessable in scaledspace: 1

[LOG 22:05:38.660] Fixing CB Minmus

[LOG 22:05:38.661] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:05:38.689] Found CBT for Minmus

[LOG 22:05:38.690] Did CBT for Minmus

[LOG 22:05:38.690] Finding PQS Minmus

[LOG 22:05:38.703] Editing PQS Minmus, radius = 487300

[LOG 22:05:38.703] Rebuilding sphere Minmus

[LOG 22:05:39.119] *RSS* using Jool scaledspace mesh (spherical) for body Minmus

[LOG 22:05:39.120] *RSS* final scale of Minmus in scaledspace: 0.08121666

[LOG 22:05:39.120] Fixing CB Jool

[LOG 22:05:39.144] Did CBT for Jool

[LOG 22:05:39.145] Finding PQS Jool

[LOG 22:05:39.157] Finding PQS JoolOcean

[LOG 22:05:39.180] Found atmo for Jool: Atmosphere

[LOG 22:05:39.181] Atmo updated

[LOG 22:05:40.821] *RSS* final scale of Jool in scaledspace: 11.65183

[LOG 22:05:40.822] Fixing CB Pol

[LOG 22:05:40.823] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:05:40.846] Found CBT for Pol

[LOG 22:05:40.847] Did CBT for Pol

[LOG 22:05:40.847] Finding PQS Pol

[LOG 22:05:40.859] Editing PQS Pol, radius = 1821300

[LOG 22:05:40.860] Rebuilding sphere Pol

[LOG 22:05:40.872] Finding PQS PolOcean

[LOG 22:05:42.570] *RSS* wrapping ScaledSpace mesh Pol to PQS Pol

[LOG 22:05:42.577] ProfileTimer CopyMesh: 0.006714s

[LOG 22:05:45.720] ProfileTimer MatchVerts: 3.142212s

[LOG 22:07:25.465] ProfileTimer UpdateTangents: 99.736820s

[LOG 22:07:25.466] *RSS* wrapped.

[LOG 22:07:25.851] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:07:25.852] ProfileTimer WrapSSM_Pol: 103.278300s

[LOG 22:07:25.853] *RSS* final scale of Pol in scaledspace: 1

[LOG 22:07:25.854] Fixing CB Eeloo

[LOG 22:07:25.881] Found CBT for Eeloo

[LOG 22:07:25.882] Did CBT for Eeloo

[LOG 22:07:25.883] Finding PQS Eeloo

[LOG 22:07:25.895] Editing PQS Eeloo, radius = 1560800

[LOG 22:07:25.896] Rebuilding sphere Eeloo

[LOG 22:07:25.909] Finding PQS EelooOcean

[LOG 22:07:27.793] *RSS* wrapping ScaledSpace mesh Eeloo to PQS Eeloo

[LOG 22:07:27.801] ProfileTimer CopyMesh: 0.006836s

[LOG 22:07:31.444] ProfileTimer MatchVerts: 3.642456s

[LOG 22:09:11.044] ProfileTimer UpdateTangents: 99.592040s

[LOG 22:09:11.045] *RSS* wrapped.

[LOG 22:09:11.403] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:09:11.404] ProfileTimer WrapSSM_Eeloo: 103.606900s

[LOG 22:09:11.405] *RSS* final scale of Eeloo in scaledspace: 1

[LOG 22:09:11.406] Fixing CB Tylo

[LOG 22:09:11.434] Found CBT for Tylo

[LOG 22:09:11.435] Did CBT for Tylo

[LOG 22:09:11.435] Finding PQS Tylo

[LOG 22:09:11.448] Editing PQS Tylo, radius = 2634100

[LOG 22:09:11.448] Rebuilding sphere Tylo

[LOG 22:09:11.461] Finding PQS TyloOcean

[LOG 22:09:11.909] *RSS* wrapping ScaledSpace mesh Tylo to PQS Tylo

[LOG 22:09:11.916] ProfileTimer CopyMesh: 0.006714s

[LOG 22:09:15.131] ProfileTimer MatchVerts: 3.214111s

[LOG 22:10:54.969] ProfileTimer UpdateTangents: 99.829710s

[LOG 22:10:54.970] *RSS* wrapped.

[LOG 22:10:55.345] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:10:55.346] ProfileTimer WrapSSM_Tylo: 103.433700s

[LOG 22:10:55.347] *RSS* final scale of Tylo in scaledspace: 1

[LOG 22:10:55.348] Fixing CB Ike

[LOG 22:10:55.349] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:10:55.377] Found CBT for Ike

[LOG 22:10:55.377] Did CBT for Ike

[LOG 22:10:55.381] Finding PQS Ike

[LOG 22:10:55.394] Editing PQS Ike, radius = 2410300

[LOG 22:10:55.394] Rebuilding sphere Ike

[LOG 22:10:55.407] Finding PQS IkeOcean

[LOG 22:10:57.114] *RSS* wrapping ScaledSpace mesh Ike to PQS Ike

[LOG 22:10:57.122] ProfileTimer CopyMesh: 0.006714s

[LOG 22:11:00.290] ProfileTimer MatchVerts: 3.167969s

[LOG 22:12:40.197] ProfileTimer UpdateTangents: 99.897830s

[LOG 22:12:40.197] *RSS* wrapped.

[LOG 22:12:40.551] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:12:40.552] ProfileTimer WrapSSM_Ike: 103.433700s

[LOG 22:12:40.553] *RSS* final scale of Ike in scaledspace: 1

[LOG 22:12:40.553] Fixing CB Sentar

[LOG 22:12:40.581] Did CBT for Sentar

[LOG 22:12:40.581] Finding PQS Sentar

[LOG 22:12:40.594] Finding PQS SentarOcean

[LOG 22:12:40.617] Found atmo for Sentar: Atmosphere

[LOG 22:12:40.618] Atmo updated

[LOG 22:12:40.619] *RSS* final scale of Sentar in scaledspace: 10.04467

[LOG 22:12:40.620] Fixing CB Vall

[LOG 22:12:40.620] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:12:40.644] Found CBT for Vall

[LOG 22:12:40.645] Did CBT for Vall

[LOG 22:12:40.645] Finding PQS Vall

[LOG 22:12:40.657] Editing PQS Vall, radius = 252300

[LOG 22:12:40.658] Rebuilding sphere Vall

[LOG 22:12:40.670] Finding PQS VallOcean

[LOG 22:12:41.184] *RSS* wrapping ScaledSpace mesh Vall to PQS Vall

[LOG 22:12:41.192] ProfileTimer CopyMesh: 0.006592s

[LOG 22:12:44.387] ProfileTimer MatchVerts: 3.195068s

[LOG 22:14:24.101] ProfileTimer UpdateTangents: 99.704960s

[LOG 22:14:24.102] *RSS* wrapped.

[LOG 22:14:24.478] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:14:24.479] ProfileTimer WrapSSM_Vall: 103.290300s

[LOG 22:14:24.479] *RSS* final scale of Vall in scaledspace: 1

[LOG 22:14:24.480] Fixing CB Erin

[LOG 22:14:24.481] *RSS* finished with Erin.pressureCurve (31 keys)

[LOG 22:14:24.509] Found CBT for Erin

[LOG 22:14:24.510] Did CBT for Erin

[LOG 22:14:24.511] Finding PQS Erin

[LOG 22:14:24.523] Editing PQS Erin, radius = 2576000

[LOG 22:14:24.524] Rebuilding sphere Erin

[WRN 22:14:24.536] Cannot find preset 'Default' for pqs 'Erin'

[LOG 22:14:24.537] Finding PQS ErinOcean

[LOG 22:14:24.561] Found atmo for Erin: Atmosphere

[LOG 22:14:24.562] Atmo updated

[LOG 22:14:24.562] *RSS* using Jool scaledspace mesh (spherical) for body Erin

[LOG 22:14:24.563] *RSS* found atmo transform for Erin

[LOG 22:14:24.564] *RSS* final scale of atmo for Erin in scaledspace: 1.02459

[LOG 22:14:24.565] *RSS* final scale of Erin in scaledspace: 0.4293333

[LOG 22:14:24.565] Fixing CB Ringle

[LOG 22:14:24.589] Found CBT for Ringle

[LOG 22:14:24.589] Did CBT for Ringle

[LOG 22:14:24.590] Finding PQS Ringle

[LOG 22:14:24.602] Editing PQS Ringle, radius = 734500

[LOG 22:14:24.603] Rebuilding sphere Ringle

[WRN 22:14:24.615] Cannot find preset 'Default' for pqs 'Ringle'

[LOG 22:14:25.027] Finding PQS RingleOcean

[LOG 22:14:25.051] *RSS* wrapping ScaledSpace mesh Ringle to PQS Ringle

[LOG 22:14:25.058] ProfileTimer CopyMesh: 0.006836s

[LOG 22:14:28.510] ProfileTimer MatchVerts: 3.451538s

[LOG 22:16:09.029] ProfileTimer UpdateTangents: 100.510000s

[LOG 22:16:09.030] *RSS* wrapped.

[LOG 22:16:09.421] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:16:09.422] ProfileTimer WrapSSM_Ringle: 104.366700s

[LOG 22:16:09.422] *RSS* final scale of Ringle in scaledspace: 1

[LOG 22:16:09.423] Fixing CB Skelton

[LOG 22:16:09.451] Found CBT for Skelton

[LOG 22:16:09.451] Did CBT for Skelton

[LOG 22:16:09.452] Finding PQS Skelton

[LOG 22:16:09.464] Editing PQS Skelton, radius = 25559000

[LOG 22:16:09.465] Rebuilding sphere Skelton

[WRN 22:16:09.478] Cannot find preset 'Default' for pqs 'Skelton'

[LOG 22:16:09.479] Finding PQS SkeltonOcean

[LOG 22:16:09.502] Found atmo for Skelton: Atmosphere

[LOG 22:16:09.503] Atmo updated

[LOG 22:16:09.504] *RSS* using Jool scaledspace mesh (spherical) for body Skelton

[LOG 22:16:09.504] *RSS* found atmo transform for Skelton

[LOG 22:16:09.505] *RSS* final scale of atmo for Skelton in scaledspace: 1.027242

[LOG 22:16:09.506] *RSS* final scale of Skelton in scaledspace: 4.259833

[LOG 22:16:09.507] Fixing CB Ablate

[LOG 22:16:09.507] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:16:09.531] Found CBT for Ablate

[LOG 22:16:09.531] Did CBT for Ablate

[LOG 22:16:09.532] Finding PQS Ablate

[LOG 22:16:09.544] Editing PQS Ablate, radius = 235800

[LOG 22:16:09.545] Rebuilding sphere Ablate

[WRN 22:16:09.557] Cannot find preset 'Default' for pqs 'Ablate'

[LOG 22:16:09.559] Finding PQS AblateOcean

[LOG 22:16:09.583] *RSS* wrapping ScaledSpace mesh Ablate to PQS Ablate

[LOG 22:16:09.590] ProfileTimer CopyMesh: 0.006836s

[LOG 22:16:12.820] ProfileTimer MatchVerts: 3.228638s

[LOG 22:17:53.028] ProfileTimer UpdateTangents: 100.199800s

[LOG 22:17:53.029] *RSS* wrapped.

[LOG 22:17:53.412] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:17:53.415] ProfileTimer WrapSSM_Ablate: 103.827600s

[LOG 22:17:53.417] *RSS* final scale of Ablate in scaledspace: 1

[LOG 22:17:53.419] Fixing CB Thud

[LOG 22:17:53.446] Found CBT for Thud

[LOG 22:17:53.447] Did CBT for Thud

[LOG 22:17:53.447] Finding PQS Thud

[LOG 22:17:53.460] Editing PQS Thud, radius = 788400

[LOG 22:17:53.461] Rebuilding sphere Thud

[WRN 22:17:53.473] Cannot find preset 'Default' for pqs 'Thud'

[LOG 22:17:53.474] Finding PQS ThudOcean

[LOG 22:17:53.497] *RSS* wrapping ScaledSpace mesh Thud to PQS Thud

[LOG 22:17:53.505] ProfileTimer CopyMesh: 0.006592s

[LOG 22:17:56.728] ProfileTimer MatchVerts: 3.223022s

[LOG 22:19:37.085] ProfileTimer UpdateTangents: 100.347800s

[LOG 22:19:37.085] *RSS* wrapped.

[LOG 22:19:37.453] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:19:37.454] ProfileTimer WrapSSM_Thud: 103.952500s

[LOG 22:19:37.455] *RSS* final scale of Thud in scaledspace: 1

[LOG 22:19:37.456] Fixing CB Laythe

[LOG 22:19:37.484] Found CBT for Laythe

[LOG 22:19:37.485] Did CBT for Laythe

[LOG 22:19:37.485] Finding PQS Laythe

[LOG 22:19:37.497] Editing PQS Laythe, radius = 24764000

[LOG 22:19:37.498] *RSS* Set offset 0

[LOG 22:19:37.499] Rebuilding sphere Laythe

[LOG 22:19:37.523] Found atmo for Laythe: Atmosphere

[LOG 22:19:37.524] Atmo updated

[LOG 22:19:37.600] *RSS* using Jool scaledspace mesh (spherical) for body Laythe

[LOG 22:19:37.601] *RSS* found atmo transform for Laythe

[LOG 22:19:37.602] *RSS* final scale of atmo for Laythe in scaledspace: 1.02459

[LOG 22:19:37.603] *RSS* final scale of Laythe in scaledspace: 4.127333

[LOG 22:19:37.604] Fixing CB Ascension

[LOG 22:19:37.604] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:19:37.628] Found CBT for Ascension

[LOG 22:19:37.629] Did CBT for Ascension

[LOG 22:19:37.629] Finding PQS Ascension

[LOG 22:19:37.641] Editing PQS Ascension, radius = 1353400

[LOG 22:19:37.642] Rebuilding sphere Ascension

[WRN 22:19:37.654] Cannot find preset 'Default' for pqs 'Ascension'

[LOG 22:19:37.655] Finding PQS AscensionOcean

[LOG 22:19:37.678] *RSS* wrapping ScaledSpace mesh Ascension to PQS Ascension

[LOG 22:19:37.685] ProfileTimer CopyMesh: 0.006592s

[LOG 22:19:40.825] ProfileTimer MatchVerts: 3.138916s

[LOG 22:21:21.561] ProfileTimer UpdateTangents: 100.727400s

[LOG 22:21:21.562] *RSS* wrapped.

[LOG 22:21:21.920] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:21:21.921] ProfileTimer WrapSSM_Ascension: 104.239300s

[LOG 22:21:21.922] *RSS* final scale of Ascension in scaledspace: 1

[LOG 22:21:21.923] Fixing CB Dres

[LOG 22:21:21.951] Found CBT for Dres

[LOG 22:21:21.952] Did CBT for Dres

[LOG 22:21:21.952] Finding PQS Dres

[LOG 22:21:21.964] Editing PQS Dres, radius = 1153000

[LOG 22:21:21.965] *RSS* Set offset 0

[LOG 22:21:22.070] Rebuilding sphere Dres

[LOG 22:21:22.554] *RSS* wrapping ScaledSpace mesh Dres to PQS Dres

[LOG 22:21:22.561] ProfileTimer CopyMesh: 0.006714s

[LOG 22:21:25.714] ProfileTimer MatchVerts: 3.152588s

[LOG 22:23:06.275] ProfileTimer UpdateTangents: 100.552400s

[LOG 22:23:06.276] *RSS* wrapped.

[LOG 22:23:06.780] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:23:06.781] ProfileTimer WrapSSM_Dres: 104.223600s

[LOG 22:23:06.782] *RSS* final scale of Dres in scaledspace: 1

[LOG 22:23:06.783] Fixing CB Pock

[LOG 22:23:06.784] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:23:06.810] Found CBT for Pock

[LOG 22:23:06.811] Did CBT for Pock

[LOG 22:23:06.812] Finding PQS Pock

[LOG 22:23:06.824] Editing PQS Pock, radius = 603500

[LOG 22:23:06.825] Rebuilding sphere Pock

[WRN 22:23:06.837] Cannot find preset 'Default' for pqs 'Pock'

[LOG 22:23:07.260] *RSS* wrapping ScaledSpace mesh Pock to PQS Pock

[LOG 22:23:07.268] ProfileTimer CopyMesh: 0.007324s

[LOG 22:23:10.756] ProfileTimer MatchVerts: 3.487061s

[LOG 22:24:52.757] ProfileTimer UpdateTangents: 101.992400s

[LOG 22:24:52.758] *RSS* wrapped.

[LOG 22:24:53.111] *RSS*: Done wrapping and exporting. Setting scale

[LOG 22:24:53.112] ProfileTimer WrapSSM_Pock: 105.848100s

[LOG 22:24:53.113] *RSS* final scale of Pock in scaledspace: 1

[LOG 22:24:53.114] Fixing CB Joker

[LOG 22:24:53.115] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:24:53.142] Found CBT for Joker

[LOG 22:24:53.143] Did CBT for Joker

[LOG 22:24:53.144] Finding PQS Joker

[LOG 22:24:53.156] Editing PQS Joker, radius = 1163000

[LOG 22:24:53.157] Rebuilding sphere Joker

[WRN 22:24:53.169] Cannot find preset 'Default' for pqs 'Joker'

[LOG 22:24:53.170] Finding PQS JokerOcean

[LOG 22:24:53.194] *RSS* using Jool scaledspace mesh (spherical) for body Joker

[LOG 22:24:53.194] *RSS* final scale of Joker in scaledspace: 0.1938333

[LOG 22:24:53.195] Fixing CB Serious

[LOG 22:24:53.196] *RSS* useLegacyAtmosphere = False but pressureCurve not found!

[LOG 22:24:53.219] Did CBT for Serious

[LOG 22:24:53.220] Finding PQS Serious

[LOG 22:24:53.231] Finding PQS SeriousOcean

[LOG 22:24:53.255] *RSS* final scale of Serious in scaledspace: 0.1521407

[LOG 22:24:53.256] *RSS* Done loading!

Edited by Hattivat
Link to comment
Share on other sites

sorry to bother you chaps but where in the tech tree is the unlock for mech jab manevr planing ?

Hmm, I thought all the MJ modules were in the first node. (Until I took time to put them at interesting places)

I'll have to go hunting for it for MS19f!

Link to comment
Share on other sites

Hmm, I thought all the MJ modules were in the first node. (Until I took time to put them at interesting places)

I'll have to go hunting for it for MS19f!

i found it and its unlocked but its not unlocked in MJ menu on my ships

Link to comment
Share on other sites

Holy crap. An hour is...quite a long time. It's only 20m for me...

This is why I ship the default OBJs with RSS, so that people using the default config don't have to wait on first load. If you switch configs and your new config doesn't come with OBJs though...then you gotta wait.

Link to comment
Share on other sites

Can confirm that MechJeb manoeuvre planning (and other tools, like the warp helper) are not usually not available for me, but it sometimes shows up when I quick-load a game (F9). I haven't investigated mechanics.

The repeatable science for Sputnik may have been an RT2 glitch. (And RT2 is kicking arse right now. If 1.4.0 didn't go out while I was flying, it should be out soon!)

Link to comment
Share on other sites

Can confirm that MechJeb manoeuvre planning (and other tools, like the warp helper) are not usually not available for me, but it sometimes shows up when I quick-load a game (F9). I haven't investigated mechanics

oohh so i not the only one thanks

Link to comment
Share on other sites

Holy crap. An hour is...quite a long time. It's only 20m for me...

This is why I ship the default OBJs with RSS, so that people using the default config don't have to wait on first load. If you switch configs and your new config doesn't come with OBJs though...then you gotta wait.

It can be safely window-moded and run in the background so it's no biggie in my opinion, I just surf the web in the meantime, or better yet, do something productive. And besides, it's just once, subsequent launches are much faster.

For reference: I play on a laptop with intel i7 2630qm 2ghz, 8gb of RAM and geforce gt540m with 2gb of vram.

Link to comment
Share on other sites

Ok, quick question: (I find things as I play through the game and use mods or parts I haven't used yet)

In ScanSat there are 4 scanners in the base game. So far in my campaign (and in my hacked game where i gave myself 10,000,000 science for testing purposes), you only ever get access to 3 (Radar Altimetry (low altitude) and SAR (high altitude) and the "Been there Done that" (Anomaly tracking)). Is the multi-spectral (Biome scanner) not implemented into the RPL Tree? If it is not (which it isn't as far as I can tell although I might have installed something wrong) What do you suggest I change in the Scansat configs to add them to specific tech nodes until the next hotfix or the 20 update comes out (or is this even possible with the RPL Tree being used)?

Also random side note: The "Been there Done that" is unlocked with some rover wheels (that might even be the specific node name), I am wondering if that is intended, I can see the reasoning because you either need the landing legs or the wheels to visit the anomalies, just seems slightly out of place right there.

Thanks in advance!

Reign

Link to comment
Share on other sites

Hi, I've just installed this with RO+RSS and my KSP isn't loading.

All parts of RO+RSS were installed and KSP loaded fine, but when I installed this the game gets stuck on the solar-system-y loading screen right before the main menu. I'll note the game does not crash and still operates fine, but it remained there without proceeding for over an hour. Has anyone dealt with something similar? I would love to see a fix here because I don't see much point to RSS+RO without this mod.

Link to comment
Share on other sites

Procedurar fairings bases are now also procedural, could you add them to the tech tree? Another thing about procedural fairings: there is a pack of fairings made by Blackheart http://forum.kerbalspaceprogram.com/threads/68892-0-23-Procedural-Parts-Texture-Pack-KW-Procedural-Fairings-April-26-ATM-Config

Could you add it to the tech tree aswell?

Link to comment
Share on other sites

Hi, I've just installed this with RO+RSS and my KSP isn't loading.

All parts of RO+RSS were installed and KSP loaded fine, but when I installed this the game gets stuck on the solar-system-y loading screen right before the main menu. I'll note the game does not crash and still operates fine, but it remained there without proceeding for over an hour. Has anyone dealt with something similar? I would love to see a fix here because I don't see much point to RSS+RO without this mod.

This usually happens on the first startup after changing the RSS config. Are you sure you haven't changed it? After the game freezes, wait for about 10 to 15 minutes, and then check KSP.log (it's in the main KSP folder, open it with notepad and scroll to the bottom) to see if it was updated post-freeze. If it was, it usually means that the game does do something, most likely recreates the planet models for RSS.

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...