Jump to content

[1.12.X] Tantares - Stockalike Soyuz and MIR [26.0][18.12.2023][Soyuz Revamp Again]

Beale

By Beale
in KSP1 Mod Releases

 Share

Recommended Posts

_Augustus_

_Augustus_

Posted
Posted
Has anybody already tried this? Kos controlled Tavio luncher!

http://imgur.com/a/Yqnxu

I used a pretty basic and clumsy code (it's the first time i program anything), but it works!

Now i want to make a code to automate deorbit and reentery, the part of the flight that i find most boring.

Do a whole KOS-controlled Progress and I will be amazed. Good work man!
Link to comment
Share on other sites
MK3424

MK3424

Posted
Posted (edited)
A more complete and corrected KIS config for Tantares.

Adds KIS support for Alnair, Vega, and Polaris parts. Corrects part name errors on the Capella and Pollux parts.


// By MK3424

@PART[Libra_Crew_A]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 1000
        externalAccess = true
        internalAccess = true
        slotsX = 5
        slotsY = 5
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Tantares_Crew_A]:NEEDS[KIS]
{
    MODULE
    {
    name = ModuleKISInventory
    maxVolume = 960
    externalAccess = true
    internalAccess = true
    slotsX = 4
    slotsY = 4
    slotSize = 50
    itemIconResolution = 128
    selfIconResolution = 128
    openSndPath = KIS/Sounds/containerOpen
    closeSndPath = KIS/Sounds/containerClose
    defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Tantares_Orbital_A]:NEEDS[KIS]
{
    MODULE
    {
    name = ModuleKISInventory
    maxVolume = 640
    externalAccess = true
    internalAccess = true
    slotsX = 4
    slotsY = 4
    slotSize = 50
    itemIconResolution = 128
    selfIconResolution = 128
    openSndPath = KIS/Sounds/containerOpen
    closeSndPath = KIS/Sounds/containerClose
    defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Hamal_Orbital_A]:NEEDS[KIS]
{
    MODULE
    {
    name = ModuleKISInventory
    maxVolume = 3900
    externalAccess = true
    internalAccess = true
    slotsX = 4
    slotsY = 4
    slotSize = 50
    itemIconResolution = 128
    selfIconResolution = 128
    openSndPath = KIS/Sounds/containerOpen
    closeSndPath = KIS/Sounds/containerClose
    defaultMoveSndPath = KIS/Sounds/itemMove
    }
}


@PART[Hamal_Control_B]:NEEDS[KIS]
{
    MODULE
    {
    name = ModuleKISInventory
    maxVolume = 960
    externalAccess = true
    internalAccess = true
    slotsX = 4
    slotsY = 4
    slotSize = 50
    itemIconResolution = 128
    selfIconResolution = 128
    openSndPath = KIS/Sounds/containerOpen
    closeSndPath = KIS/Sounds/containerClose
    defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Capella_Control_A]:NEEDS[KIS]
{
    MODULE
    {
    name = ModuleKISInventory
    maxVolume = 8100
    externalAccess = true
    internalAccess = true
    slotsX = 6
    slotsY = 6
    slotSize = 50
    itemIconResolution = 128
    selfIconResolution = 128
    openSndPath = KIS/Sounds/containerOpen
    closeSndPath = KIS/Sounds/containerClose
    defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Pollux_Control_A]:NEEDS[KIS]
{
    MODULE
    {
    name = ModuleKISInventory
    maxVolume = 2880
    externalAccess = true
    internalAccess = true
    slotsX = 4
    slotsY = 4
    slotSize = 50
    itemIconResolution = 128
    selfIconResolution = 128
    openSndPath = KIS/Sounds/containerOpen
    closeSndPath = KIS/Sounds/containerClose
    defaultMoveSndPath = KIS/Sounds/itemMove
    }
}
//Below  added by Gristle

@PART[Vega_Crew_A]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 1000
        externalAccess = true
        internalAccess = true
        slotsX = 5
        slotsY = 5
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Vega_Crew_B]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 640
        externalAccess = true
        internalAccess = true
        slotsX = 4
        slotsY = 4
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Vega_Crew_C]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 360
        externalAccess = true
        internalAccess = true
        slotsX = 3
        slotsY = 3
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Vega_Crew_D]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 360
        externalAccess = true
        internalAccess = true
        slotsX = 3
        slotsY = 3
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Alnair_Crew_A]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 360
        externalAccess = true
        internalAccess = true
        slotsX = 3
        slotsY = 3
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Alnair_Crew_B]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 480
        externalAccess = true
        internalAccess = true
        slotsX = 4
        slotsY = 3
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Alnair_Crew_C]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 420
        externalAccess = true
        internalAccess = true
        slotsX = 3
        slotsY = 3
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Alnair_Orbital_A]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 360
        externalAccess = true
        internalAccess = true
        slotsX = 3
        slotsY = 3
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Alnair_Orbital_B]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 1200
        externalAccess = true
        internalAccess = true
        slotsX = 6
        slotsY = 5
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Polaris_Crew_A]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 160
        externalAccess = true
        internalAccess = true
        slotsX = 2
        slotsY = 2
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

@PART[Polaris_Crew_A]:NEEDS[KIS]
{
    MODULE
    {
        name = ModuleKISInventory
        maxVolume = 360
        externalAccess = true
        internalAccess = true
        slotsX = 3
        slotsY = 3
        slotSize = 50
        itemIconResolution = 128
        selfIconResolution = 128
        openSndPath = KIS/Sounds/containerOpen
        closeSndPath = KIS/Sounds/containerClose
        defaultMoveSndPath = KIS/Sounds/itemMove
    }
}

Thanks for the fix,and the added configs. I knew there was something wrong with the config i made, because i added them in the parts's cfg, instead of the KIS config. And moving them to the KIS config file, has probably messed up the settings and names.

Edited by MK3424
Link to comment
Share on other sites
Beale

Beale

Posted
  • Author
Posted
It's getting really pretty ! :) Last time I used the klipper I noticed ( with poor dead kerbonauts ) that there is no heatshield config yet on the klipper, or is it deadly reentry who caused this ?

Ah!

Yeah, no DRE compatibility yet.

I'm not sure how a DRE thing works for non-ablative heatshields, so I'll need to look elsewhere at configs.

I really like the tiled Kliper look
Looks great........
I like the tiled kliper better IMO. :)

Many thanks!

It will stay then :)

A more complete and corrected KIS config for Tantares.

Adds KIS support for Alnair, Vega, and Polaris parts. Corrects part name errors on the Capella and Pollux parts.


// By MK3424

@PART[Libra_Crew_A]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 1000
		externalAccess = true
		internalAccess = true
		slotsX = 5
		slotsY = 5
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Tantares_Crew_A]:NEEDS[KIS]
{
	MODULE
	{
	name = ModuleKISInventory
	maxVolume = 960
	externalAccess = true
	internalAccess = true
	slotsX = 4
	slotsY = 4
	slotSize = 50
	itemIconResolution = 128
	selfIconResolution = 128
	openSndPath = KIS/Sounds/containerOpen
	closeSndPath = KIS/Sounds/containerClose
	defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Tantares_Orbital_A]:NEEDS[KIS]
{
	MODULE
	{
	name = ModuleKISInventory
	maxVolume = 640
	externalAccess = true
	internalAccess = true
	slotsX = 4
	slotsY = 4
	slotSize = 50
	itemIconResolution = 128
	selfIconResolution = 128
	openSndPath = KIS/Sounds/containerOpen
	closeSndPath = KIS/Sounds/containerClose
	defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Hamal_Orbital_A]:NEEDS[KIS]
{
	MODULE
	{
	name = ModuleKISInventory
	maxVolume = 3900
	externalAccess = true
	internalAccess = true
	slotsX = 4
	slotsY = 4
	slotSize = 50
	itemIconResolution = 128
	selfIconResolution = 128
	openSndPath = KIS/Sounds/containerOpen
	closeSndPath = KIS/Sounds/containerClose
	defaultMoveSndPath = KIS/Sounds/itemMove
	}
}


@PART[Hamal_Control_B]:NEEDS[KIS]
{
	MODULE
	{
	name = ModuleKISInventory
	maxVolume = 960
	externalAccess = true
	internalAccess = true
	slotsX = 4
	slotsY = 4
	slotSize = 50
	itemIconResolution = 128
	selfIconResolution = 128
	openSndPath = KIS/Sounds/containerOpen
	closeSndPath = KIS/Sounds/containerClose
	defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Capella_Control_A]:NEEDS[KIS]
{
	MODULE
	{
	name = ModuleKISInventory
	maxVolume = 8100
	externalAccess = true
	internalAccess = true
	slotsX = 6
	slotsY = 6
	slotSize = 50
	itemIconResolution = 128
	selfIconResolution = 128
	openSndPath = KIS/Sounds/containerOpen
	closeSndPath = KIS/Sounds/containerClose
	defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Pollux_Control_A]:NEEDS[KIS]
{
	MODULE
	{
	name = ModuleKISInventory
	maxVolume = 2880
	externalAccess = true
	internalAccess = true
	slotsX = 4
	slotsY = 4
	slotSize = 50
	itemIconResolution = 128
	selfIconResolution = 128
	openSndPath = KIS/Sounds/containerOpen
	closeSndPath = KIS/Sounds/containerClose
	defaultMoveSndPath = KIS/Sounds/itemMove
	}
}
//Below  added by Gristle

@PART[Vega_Crew_A]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 1000
		externalAccess = true
		internalAccess = true
		slotsX = 5
		slotsY = 5
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Vega_Crew_B]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 640
		externalAccess = true
		internalAccess = true
		slotsX = 4
		slotsY = 4
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Vega_Crew_C]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 360
		externalAccess = true
		internalAccess = true
		slotsX = 3
		slotsY = 3
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Vega_Crew_D]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 360
		externalAccess = true
		internalAccess = true
		slotsX = 3
		slotsY = 3
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Alnair_Crew_A]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 360
		externalAccess = true
		internalAccess = true
		slotsX = 3
		slotsY = 3
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Alnair_Crew_B]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 480
		externalAccess = true
		internalAccess = true
		slotsX = 4
		slotsY = 3
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Alnair_Crew_C]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 420
		externalAccess = true
		internalAccess = true
		slotsX = 3
		slotsY = 3
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Alnair_Orbital_A]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 360
		externalAccess = true
		internalAccess = true
		slotsX = 3
		slotsY = 3
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Alnair_Orbital_B]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 1200
		externalAccess = true
		internalAccess = true
		slotsX = 6
		slotsY = 5
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Polaris_Crew_A]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 160
		externalAccess = true
		internalAccess = true
		slotsX = 2
		slotsY = 2
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

@PART[Polaris_Crew_A]:NEEDS[KIS]
{
	MODULE
	{
		name = ModuleKISInventory
		maxVolume = 360
		externalAccess = true
		internalAccess = true
		slotsX = 3
		slotsY = 3
		slotSize = 50
		itemIconResolution = 128
		selfIconResolution = 128
		openSndPath = KIS/Sounds/containerOpen
		closeSndPath = KIS/Sounds/containerClose
		defaultMoveSndPath = KIS/Sounds/itemMove
	}
}

Thanks, great stuff!

I've included it.

Ok... as I'm deadly using Tantares all around (impossibile non farlo, Beale, vero??? Saluti dall'Italia già che ci sono :P) I found usefull to update the TweakScale Tantares config I had (... it seems that the mod itself has a reference on past Tantares versions) so:

http://digilander.libero.it/Araym/KSP/Tantares_TweakScale.cfg

updated to Tantares v.21

... aside from that, I DIDN'T include all the parts:

- no docking port resize (they are "size 0", so should stay like they are)

- no ATV and Cygnus (they fit their own place, for me)

... but generally, it's an all over look on mostly the whole mod.

Grazie per il gran lavoro che fai ad aggiornare le tue creazioni :D

prego!

I think many people will enjoy this. I should contact the creator of tweakscale to try and get the outdated config removed.

Many thanks for making it.

Yep!

You've installed it wrong.

You will need to first delete the Tantares and TantaresLV folders you have, then install it again.

So should we expect a slight resize for Kliper? (Please don't mind if it was already suggested or already done, I was offline for a few days because I had a toe nail surgery and I am still recovering.)

I've being trying to model the OM and, yep it might have to go to 1.875m. Trouble is then it will not fit so well on the Soyuz rocket.

Has anybody already tried this? Kos controlled Tavio luncher!

http://imgur.com/a/Yqnxu

I used a pretty basic and clumsy code (it's the first time i program anything), but it works!

Now i want to make a code to automate deorbit and reentery, the part of the flight that i find most boring.

That's amazing!

I tried without success to make a KOS launcher, it was much more simple than a Soyuz rocket and still could not do it.

Love to see this so much!

Link to comment
Share on other sites
Bomoo

Bomoo

Posted
Posted (edited)

Beale Kliper??! Looks incredible, man, and I'm digging those tiles from a few posts ago. Haven't had much luck testing it, though what immediately strikes me is that it feels like it should have a cabin capacity of 4 at most. 6 seems like way too many for that small space.

Edit: Hm, for the flying characteristics, have you considered splitting it into multiple parts? Like the KSO shuttles, I'm thinking it would be easier to manage where the CoM/CoL are if you can edit several parts separately. For something small like the Kliper, maybe fuselage, left wing, right wing, and flaps would be enough. Is it even possible to move the CoM forward of the CoL for a single-part craft? Mysteries of the universe.

Edited by Bomoo
Link to comment
Share on other sites
Beale

Beale

Posted
  • Author
Posted
The real Kliper would have issues fitting on the Soyuz.

You are right, I can gather a few concepts of the Kliper mounted on the Zenit and Angara(?), so I'm not sure what size it should be.

Beale Kliper??! Looks incredible, man, and I'm digging those tiles from a few posts ago. Haven't had much luck testing it, though what immediately strikes me is that it feels like it should have a cabin capacity of 4 at most. 6 seems like way too many for that small space.

Edit: Hm, for the flying characteristics, have you considered splitting it into multiple parts? Like the KSO shuttles, I'm thinking it would be easier to manage where the CoM/CoL are if you can edit several parts separately. For something small like the Kliper, maybe fuselage, left wing, right wing, and flaps would be enough. Is it even possible to move the CoM forward of the CoL for a single-part craft? Mysteries of the universe.

Thanks!

Splitting parts is not really... Okay, in my opinion. They will be extremely niche and specific parts, as opposed to a single niche and specific part.

However, yeah, it is possible to play around with the COM, in it's current iteration the Kliper can fly fairly well, also there is flap parts which may allow it to be tweaked further.

Really, I'm banking on new Aero properties and part modules to allow the easier creation of lifting bodies, here's hoping!

Link to comment
Share on other sites
Djolox

Djolox

Posted
Posted (edited)
Ah!

Yeah, no DRE compatibility yet.

I'm not sure how a DRE thing works for non-ablative heatshields, so I'll need to look elsewhere at configs.

Many thanks!

It will stay then :)

Thanks, great stuff!

I've included it.

prego!

I think many people will enjoy this. I should contact the creator of tweakscale to try and get the outdated config removed.

Many thanks for making it.

Yep!

You've installed it wrong.

You will need to first delete the Tantares and TantaresLV folders you have, then install it again.

I've being trying to model the OM and, yep it might have to go to 1.875m. Trouble is then it will not fit so well on the Soyuz rocket.

That's amazing!

I tried without success to make a KOS launcher, it was much more simple than a Soyuz rocket and still could not do it.

Love to see this so much!

Anyway as earlier suggested you can use Angara instead of Soyuz? Maybe 2.5m Angara, and a 2.5m-1.875m adapter with built in LES?

Edited by Djolox
Link to comment
Share on other sites
planeguy868

planeguy868

Posted
Posted
I wish I could get more rep to you! :)

This looks amazing!

Hm... what is this?

A beta release, perhaps?

This is what I've got so far; a texture pack for Tantares and Hamal. Let me know if there's any issues with the configs (I had added MechJeb and TweakScale lines to them, and removed them for the release, and I also had to change the paths for the MODEL { } lines), or if you have any advice for the textures!

All credit goes to Beale for his amazing Tantares pack, and for releasing the .psd files for his part textures.

Link to comment
Share on other sites
Beale

Beale

Posted
  • Author
Posted
Why is it that my antennas have blue stars on them while on everyone else's screenshots they have red stars?

Changed colours due to laws in a few Eastern European countries regarding symbols.

Anyway as earlier suggested you can use Angara instead of Soyuz? Maybe 2.5m Angara, and a 2.5m-1.875m adapter with built in LES?

The Angara will likely be 1.875m, to scale with 2.5m PPTS

Launch vehicle for Kliper, still not sure.

angara5p_ila08_scale_1.jpg

Could you maybe make some of the Soviet Mars probes and their little rovers?

The Mars-3 and the cute little Prop-M, yeah I have a few ideas :)

Not for a little while though!

http://i.imgur.com/oUoCaoN.png

What is this? Oh, can't hear you over the sound of my Progress-TMA.

*drops mic*

Great stuff! Looks really nice! :)

Hm... what is this?

A beta release, perhaps?

This is what I've got so far; a texture pack for Tantares and Hamal. Let me know if there's any issues with the configs (I had added MechJeb and TweakScale lines to them, and removed them for the release, and I also had to change the paths for the MODEL { } lines), or if you have any advice for the textures!

All credit goes to Beale for his amazing Tantares pack, and for releasing the .psd files for his part textures.

And you release it so quickly too! :)

I'll hopefully have a chance to try it out soon.

Link to comment
Share on other sites
Andy0432

Andy0432

Posted
Posted
Ah!

Yeah, no DRE compatibility yet.

I'm not sure how a DRE thing works for non-ablative heatshields, so I'll need to look elsewhere at configs.

Many thanks!

It will stay then :)

Thanks, great stuff!

I've included it.

prego!

I think many people will enjoy this. I should contact the creator of tweakscale to try and get the outdated config removed.

Many thanks for making it.

Yep!

You've installed it wrong.

You will need to first delete the Tantares and TantaresLV folders you have, then install it again.

I've being trying to model the OM and, yep it might have to go to 1.875m. Trouble is then it will not fit so well on the Soyuz rocket.

That's amazing!

I tried without success to make a KOS launcher, it was much more simple than a Soyuz rocket and still could not do it.

Love to see this so much!

Yep! Silly, Lazy me XD. I simply just dragged the new files in and replaced the ones with the same name instead of deleting the old files first. Guess that's what I guess for been lazy. Thanks!

BTW are you planning to include some pre made craft files in the downloads? E.g. Soyuz, MIR etc. ? I think it would be good to get a example instead of having to alt+tab out and in of the game to look at pictures of the crafts in real life and recreate them in KSP.

Anyway Keep up the good work!

Link to comment
Share on other sites
Beale

Beale

Posted
  • Author
Posted (edited)
It would've launched on a Soyuz rocket, I looked it up.

The Kliper was redesigned quite a lot of time (Probably why it ended up cancelled).

zklipext.jpg

Launch vehicle was flipple-wizmilpered around a few times to meet changing launch requirements.

There's an awful lot of mis-information I think.

zkliplvs.jpg

Angara A3, Zenit and Soyuz 2-3.

Source all of this: Astronautix, so I might be wrong.

BTW are you planning to include some pre made craft files in the downloads? E.g. Soyuz, MIR etc. ? I think it would be good to get a example instead of having to alt+tab out and in of the game to look at pictures of the crafts in real life and recreate them in KSP.

Anyway Keep up the good work!

Glad you fixed it.

About crafts, perhaps! Although you may want to check out this!

Edited by Beale
Link to comment
Share on other sites
NasaSpace101

NasaSpace101

Posted
Posted

Hey Beale, I understand you have a lot going on right now, but I have one thing to say. I know I definently can't model and texture, but can we focus on working on what we got and, maybe the launch vehicles? I admire your work and it's something I'm just throwing out there.

Thanks in advance.

Link to comment
Share on other sites
Beale

Beale

Posted
  • Author
Posted (edited)
Hey Beale, I understand you have a lot going on right now, but I have one thing to say. I know I definently can't model and texture, but can we focus on working on what we got and, maybe the launch vehicles? I admire your work and it's something I'm just throwing out there.

What in particular stands out as missing / unfinished to you?

Perhaps the Cygnus can use a launch vehicle.

IVAs, sure they are coming slowly. Working on VA atm.

Edited by Beale
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...