[1.7-1.9] SMURFF: Simple Module adjUstments for Real-ish Fuel-mass Fractions 1.9.1 (02019 Nov 12)

The-Doctor · December 31, 2016

@Kerbas_ad_astra hey, so glad I found your mod, it enabled me to put my first satellite in orbit in RSS. I've got some issues tho, it increases the engine performance etc and makes them more powerful yes, but they are slightly under powered. Even the stock spacecraft can't reach orbit as they are, even with this to give them a boost.

ricardoguedes21 · December 31, 2016

Any update fo 1.2.2?

Kerbas_ad_astra · December 31, 2016

Stock spacecraft are designed with the stock solar system in mind, so while SMURFF will improve their performance, it's not surprising that they may not necessarily work in the real solar system. I've found that doubling the fuel tank on the upper stage of the Kerbal X and shedding the legs and ladders lets it get to orbit.

The basis for the engine buff was comparing the TWR of stock engines (15-25) to the state-of-the-art (60-100+). There are engines nowadays that are better -- the Merlin family is approaching 200 -- but it feels appropriate, given KSP's style, to keep the setpoint in 70s-90s era technology. Note that the stock size 1 engines are at the lower end of that range, so you may be better off losing the boosters from the Kerbal X and replacing them with a pair of size 2 boosters or using higher-TWR size 1 engines from a mod (e.g. SpaceY).

Zuthal · January 4, 2017

What would be the proper way of determining what lever is the right one for a certain system scale? I was assuming that the mass ratio multiplier relative to stock is proportional to the lever, and that levers=1 is balanced for RSS.

Then, the lever for a certain scale, I would htink, to maintain roughly the same difficulty, should I think be proportional to the ratio of the mass ratios you need to LKO in the different scales, which would give ~0.56 for the levers for 64k if you use engines with an exhaust velocity of 3500 m/s.

Is that anywhere close to sensible?

Kerbas_ad_astra · January 4, 2017

I had a big post typed up where I used the fuel tank mass fraction to calculate maximum single-stage delta-V, compared that to the delta-V required to get to orbit in a "characteristic difficulty factor," and then calculated the required tankLever to match CDFs for stock, 64K, and RSS, but there's something I'm missing because the numbers don't match my experiments. I thought I could ignore engine mass and focus on fuel tanks but clearly that's not the case. I've got some more numbers to crunch.

Edited January 4, 2017 by Kerbas_ad_astra

TheRagingIrishman · January 5, 2017

6 hours ago, Kerbas_ad_astra said:

I had a big post typed up where I used the fuel tank mass fraction to calculate maximum single-stage delta-V, compared that to the delta-V required to get to orbit in a "characteristic difficulty factor," and then calculated the required tankLever to match CDFs for stock, 64K, and RSS, but there's something I'm missing because the numbers don't match my experiments. I thought I could ignore engine mass and focus on fuel tanks but clearly that's not the case. I've got some more numbers to crunch.

FYI you can only ignore engine (and other non-fuel) mass when doing deltaV calcs if it's a negligible % of the final mass due to the way the Tsiolkovsky rocket equation works.

Edited January 5, 2017 by TheRagingIrishman

Kerbas_ad_astra · January 5, 2017

I was applying a limit case (assuming fuel tank mass was much larger than the rest) but the results produced didn't work out -- the assumption that the simple and complex cases scaled together was invalid.

Quodios Kerman · January 8, 2017

I think this mod does not work with Space Y Heavy Lifter Pack Mod. Every Space Y parts have fuel mass fraction of 1 : 8, but every other stock parts have 1 : 32. Would you mind to check?

Kerbas_ad_astra · January 8, 2017

Please confirm that you have the latest version of SMURFF. There was a bug like that in a previous version, but it's been fixed (just checked it myself). If the issue persists, please put your game log (output.txt) somewhere I can download it and send me the link.

Quodios Kerman · January 9, 2017

I've read your writings on the Space Y thread, but I couldn't figure out the problem. I'm not using cyrogenic engines, and you'd already fixed the problem in current version.

I'm using current version of SMURFF (v1.5.5), and here's the output_log.txt(7.35MB).

https://www.dropbox.com/s/tl2slqtgtvt6b11/output_log.txt?dl=0

Thank you for notifing me that you need output.txt

Kerbas_ad_astra · January 9, 2017

Okay, the issue is that the Interstellar Fuel Switch Integration patch doesn't delete the LiquidFuel and Oxidizer resources from parts it acts on, so SMURFF treats them like regular fuel tanks, but then the IFS module has stock-balanced values in it, so SMURFF's changes get ignored. The stock parts turn out OK because Color-Coded Canisters patches them before IFS does, and it properly removes the resource nodes, so SMURFF patches the IFS module.

@FreeThinker, you need to add the following to your IntegrateInterstellarFuelSwitch patch:

!RESOURCE[LiquidFuel] {}
!RESOURCE[Oxidizer] {}

(I also need to adjust SMURFF's IFS patch. The 'manifest' of resources has changed somewhat.)

Edited January 9, 2017 by Kerbas_ad_astra

FreeThinker · January 9, 2017

7 hours ago, Kerbas_ad_astra said:
Okay, the issue is that the Interstellar Fuel Switch Integration patch doesn't delete the LiquidFuel and Oxidizer resources from parts it acts on, so SMURFF treats them like regular fuel tanks, but then the IFS module has stock-balanced values in it, so SMURFF's changes get ignored. The stock parts turn out OK because Color-Coded Canisters patches them before IFS does, and it properly removes the resource nodes, so SMURFF patches the IFS module.

@FreeThinker, you need to add the following to your IntegrateInterstellarFuelSwitch patch:
!RESOURCE[LiquidFuel] {}
!RESOURCE[Oxidizer] {}
(I also need to adjust SMURFF's IFS patch. The 'manifest' of resources has changed somewhat.)

There is a problem with that. Removing the resource will make the part behave differently. IFS also uses it to select the initial tank and ensure mass and cost for stock parts is maintained.

Quodios Kerman · January 10, 2017

One thing I want to notify is that before installation of color-coded canister SMURFF worked well.

Later I will delete IFS to see how Space Y works.

Quodios Kerman · January 11, 2017

I deleted IFS and Space Y now works well with SMURFF. Also, SMURFF did not work without color-coded canister and with IFS.

Thank you for your help, and hope this problem could be fixed.

Kerbas_ad_astra · January 11, 2017

On 1/9/2017 at 7:44 AM, FreeThinker said:

There is a problem with that. Removing the resource will make the part behave differently. IFS also uses it to select the initial tank and ensure mass and cost for stock parts is maintained.

I'm not sure that it's necessary, though. That patch only operates on LFO tanks, so why should the default tank be anything other than LFO? The cost of fuel and oxidizer can be subtracted from the part cost in the same Module Manager patch, and the 'mass' variable is the dry mass, so it doesn't matter whether LFO RESOURCE nodes are present or not.

(If it is necessary, I can still adapt SMURFF to it, but it's more trouble for me...)

Edited January 11, 2017 by Kerbas_ad_astra

Noel32 · January 18, 2017

I'm assuming that this would work fine with the Interstellar mod linked above particularly with regard to things like the warp drive?

Ultrop · January 25, 2017

Love this mod, simplicity it self for the end user. Now I can finally make use of the RSS. Thank you

Kerbas_ad_astra · January 27, 2017

On 1/25/2017 at 0:29 PM, Ultrop said:

Love this mod, simplicity it self for the end user. Now I can finally make use of the RSS. Thank you

I'm glad you like it!

In other news, I've figured out a way to more robustly accommodate IFS's integration patch (that does not depend on it deleting the stock resource nodes), and now that the latest release of Mark IV resolves its MM patch errors, I can move forward with patching its B9 tank types as well.

Kerbas_ad_astra · January 28, 2017

SMURFF Version 1.6 is out!

02017 01 28 (1.6): Happy New Year

Removed "Extra" patch for the procedural ore tank, as they've accepted my PR to add it directly to the part config.
Engine patches now operate on minThrust as well as maxThrust (if someone should ever release an engine with nonzero minThrust).
Reduced reaction-wheel authority on command pods in proportion to their mass reduction.
Adjusted IFS patch. It works again, but note that IFS already has its own RSS patch, so SMURFF defers to that. (SMURFF steps in for non-RSS solar systems.)
Added support for Mark IV tank types. Because the corresponding version of Mark IV was released for KSP 1.2.2, this version and later versions are not compatible with KSP 1.2.0 or 1.2.1.

starchitect · February 13, 2017

There seems to be an issue between SMURFF, MFT and Procedural Parts. The procedural tanks are very heavy (something like 1:6 Dry/Wet) and it looks like both the Procedural tank switcher and the MFT tank switcher modules are both active on the part - note the 3x different measurements for dry/wet mass in the below image. Has anyone else experienced this issue?

Kerbas_ad_astra · February 13, 2017

MFT does its tank mass calculations independently of whatever the part's "mass" number is, so there's no point in using SMURFF with it, and you probably shouldn't use both MFT and Procedural Parts at the same time.

Edited February 13, 2017 by Kerbas_ad_astra

starchitect · February 13, 2017

Oh sorry you are right, I somehow hadn't noticed the lack of support between SMURFF and MFT until now. That said, I haven't had any issues with just those two until I decided to try Procedural Parts, it had seemed to be working well having MFT for tanks with SMURFF just rebalancing engines.

According to the Procedural Parts thread it has built-in support for MFT, I might just try tweaking the config files myself to try and get all 3 playing nicely together.

brygun · February 22, 2017

Hello,

Im new to trying out this mod and have some basic questions. CKAN is being used as a mod manager. First general discussion on why Im trying SMURFF

Im not using Real Fuels largely due to the engine restarts and ullage. For engine restarts I like reusable explorers which they often trouble. An EVA Kerbal engineer could replace the 'matches' or other starters but Im not aware of that being coded yet. The ullage is a relatively minor issue solved by having solid rockets fire for a few seconds before starting the engine. The game code though requires an extra stage or manual vs Mech Jeb auto staging. With larger and certainly complex explorers having to give up potentially several stages is actually a problem. SMURFF seems to provide the more real ISP, engines and tanks without those issues. Hoping it goes well.

My questions are more about views on if these are the right mods and if Im missing any. If got lots of mods installed, like MechJeb and so on, so this is more about mods giving parts.

Real Solar System is being used

USI for a decent yet playable life support mod has been selected.

SpaceY is installed

I was using KW Rocketry in a recent play. I'm wondering if it is reasonably close to this mod so I might copy over those craft.

Near Future various are installed as well.

Are there other mods I should consider?

Are there other mods to avoid?

Edited February 22, 2017 by brygun
added 'are there' questions

Bamse · February 24, 2017

It would seem B9 makes SMURFF throw MM errors and hinder cache creation. Might just be my heavily modded RSS install, but hey, might as well report it =)

Seems to be similar to previous errors/problems in regards to the missing "addedMass".

KSP.log snippet:

Spoiler


[LOG 12:21:26.477] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Adapter_Front/Aero_HL_Adapter_Front/B9_Aero_HL_Adapter_Front
[LOG 12:21:26.478] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.478] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.479] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Body/05m-Universal/B9_Aero_HL_Body_Structure_05m
[LOG 12:21:26.480] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.481] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.482] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Body/1m-Universal/B9_Aero_HL_Body_Structure_1m_U
[LOG 12:21:26.482] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.483] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.484] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Body/2m-Adapter-Side/B9_Aero_HL_Adapter_2m_Side
[LOG 12:21:26.485] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.485] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.486] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Body/2m-Universal-Adapter/B9_Aero_HL_Body_Structure_2m_A
[LOG 12:21:26.487] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.488] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.488] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Body/2m-Universal/B9_Aero_HL_Body_Structure_2m
[LOG 12:21:26.490] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.490] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.491] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Body/6m-Universal/B9_Aero_HL_Body_Structure_6m
[LOG 12:21:26.492] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.493] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.494] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Body/8m-Universal-Tail/B9_Aero_HL_Body_Tail_8m
[LOG 12:21:26.495] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.495] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.496] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Extension_A/Aero_HL_Extension_A/B9_Aero_HL_Extension_A
[LOG 12:21:26.497] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.498] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.499] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Extension_B/Universal/B9_Aero_HL_Extension_B1
[LOG 12:21:26.500] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.501] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.502] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_HL_Extension_C/Aero_HL_Extension_C/B9_Aero_HL_Extension_C
[LOG 12:21:26.503] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.503] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.504] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Aero_Intake_Ramp/Mount/B9_Aero_Intake_Mount
[LOG 12:21:26.505] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.506] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.507] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk1/body_mk1_section_050m/B9_Body_Mk1_Fuselage_050m
[LOG 12:21:26.508] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.508] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.509] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk1/body_mk1_section_100m/B9_Body_Mk1_Fuselage_100m
[LOG 12:21:26.510] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.510] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.511] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk1/body_mk1_section_200m/B9_Body_Mk1_Fuselage_200m
[LOG 12:21:26.512] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.513] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.514] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk1/body_mk1_section_400m/B9_Body_Mk1_Fuselage_400m
[LOG 12:21:26.515] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.515] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.516] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_adapter_125m_bicoupler/B9_Body_Adapter_Mk2_125m_Bicoupler
[LOG 12:21:26.517] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.518] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.519] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_adapter_125m_long/B9_Body_Adapter_Mk2_125m_Long
[LOG 12:21:26.520] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.520] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.521] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_adapter_125m_short/B9_Body_Adapter_Mk2_125m_Short
[LOG 12:21:26.522] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.523] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.525] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_adapter_125m_shroud_full/B9_Body_Adapter_Mk2_Mk2_Rot
[LOG 12:21:26.526] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.527] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.529] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_adapter_125m_shroud_half/B9_Body_Adapter_Mk2_125m_Shroud
[LOG 12:21:26.530] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.531] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.532] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_adapter_250m_long/B9_Body_Adapter_Mk2_250m_Long
[LOG 12:21:26.536] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.537] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.538] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_adapter_250m_short/B9_Body_Adapter_Mk2_250m_Short
[LOG 12:21:26.539] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.540] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.542] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_nosecone_125m_long/B9_Body_Mk1_Nosecone_Long
[LOG 12:21:26.543] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.544] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.545] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_nosecone_125m_short/B9_Body_Mk1_Nosecone_Short
[LOG 12:21:26.546] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.546] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.547] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_nosecone_direct_long/B9_Body_Mk2_Nosecone_Long
[LOG 12:21:26.548] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.548] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.549] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_nosecone_direct_short/B9_Body_Mk2_Nosecone_Short
[LOG 12:21:26.551] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.551] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.552] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_section_0m/B9_Body_Mk2_Fuselage_050m
[LOG 12:21:26.553] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.553] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.554] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_section_1m/B9_Body_Mk2_Fuselage_1m
[LOG 12:21:26.555] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.556] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.557] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Body_Mk2/body_mk2_section_2m/B9_Body_Mk2_Fuselage_2m
[LOG 12:21:26.557] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.558] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.559] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_MK1_Junction/Cockpit_MK1_Junction/B9_Cockpit_MK1_Junction
[LOG 12:21:26.560] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.561] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.562] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_Adapter/Cockpit_S2_Adapter/B9_Cockpit_S2_Adapter
[LOG 12:21:26.563] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.563] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.564] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_Body/05m-Universal/B9_Cockpit_S2_Body_05m
[LOG 12:21:26.565] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.565] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.566] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_Body/1m-Universal/B9_Cockpit_S2_Body_RCS
[LOG 12:21:26.567] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.568] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.568] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_Body/2m-Universal/B9_Cockpit_S2_Body
[LOG 12:21:26.569] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.570] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.570] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_Body/6m-Universal/B9_Cockpit_S2_Body_6m
[LOG 12:21:26.571] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.572] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.573] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_Body_Crew/6m/B9_Cockpit_S2_Body_Crew_6m
[LOG 12:21:26.575] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.576] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.577] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_Body_Tail/Tail/B9_Cockpit_S2_Body_Tail
[LOG 12:21:26.578] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.579] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.579] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_W_Body/Body-Back-EM1-Universal/B9_Cockpit_S2_BodyLarge_Back_EngineMount1
[LOG 12:21:26.580] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.581] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.582] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_W_Body/Body-Back-EM2-Universal/B9_Cockpit_S2_BodyLarge_Back_EngineMount2
[LOG 12:21:26.583] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.583] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.584] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_W_Body/Body-Back-Universal/B9_Cockpit_S2_BodyLarge_Back
[LOG 12:21:26.585] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.585] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.586] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_W_Body/Body-Front-Intake/B9_Cockpit_S2_BodyLarge_Front
[LOG 12:21:26.587] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.588] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.588] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_W_Body/Body-Front-Universal/B9_Cockpit_S2_BodyLarge_Front2
[LOG 12:21:26.590] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.590] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.591] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Cockpit_S2_W_Body/Body/B9_Cockpit_S2_BodyLarge
[LOG 12:21:26.592] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.593] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.595] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Engine_SABRE_Body/M/B9_Engine_SABRE_M_Body
[LOG 12:21:26.596] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.596] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.597] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Engine_SABRE_Body/S/B9_Engine_SABRE_S_Body
[LOG 12:21:26.598] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.598] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$
[LOG 12:21:26.601] [ModuleManager] Applying node SMURFF/SMURFF/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]]:FOR[zzz_SMURFF] to B9_Aerospace/Parts/Utility_Nosecone_Science/Nosecone/B9_Cockpit_MK2_Nosecone
[LOG 12:21:26.602] [ModuleManager] Cannot find key addedMass in SUBTYPE
[LOG 12:21:26.602] [ModuleManager] Error - Cannot parse variable search when inserting new key modMass = #$/MODULE[ModuleB9PartSwitch]:HAS[@SUBTYPE[LH2]]/SUBTYPE[LH2]/addedMass$

Full log: https://www.dropbox.com/s/xibekdtju12v24c/KSP.log?dl=0

Kerbas_ad_astra · February 24, 2017

Thanks for the heads-up -- I need to be more particular with that patch in calling out CryoTanks's tank type, and not the similarly-named B9 cryo tank type.

[1.7-1.9] SMURFF: Simple Module adjUstments for Real-ish Fuel-mass Fractions 1.9.1 (02019 Nov 12)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation