[Release][V3.2][KSP 1.2] Interstellar Flight Inc. - Kerbal Life Support Mod

KerTrotsky · September 22, 2014

I've looked at all the life support plug-ins and mods for KSP, I like yours because of the simplicity and low overhead approach, which still nevertheless simulates life support limitations fairly well.

Question : on CURSE this mod is indicated as "Supports: 0.23.5" - is this correct? I noticed you just released a new file, is the compatibility now verified with 0.24.2?

Stavell · September 24, 2014

It supports 0.24.2 which is my main install of KSP. I have a 0.23 install also so I know it works with .23 too so that is why it lists multiple KSP versions.

spiritplumber · September 24, 2014

I've built a greenhouse, it uses the greenhouse part at http://forum.kerbalspaceprogram.com/threads/37408-The-greenhouse-module for the model.

Here's the code:



RESOURCE_DEFINITION
{
  name = Photosynthesis
  density = 0.000001
  flowMode = NO_FLOW
  transfer = NONE
}

RESOURCE_DEFINITION
{
  name = BioMass
  density = 0.000001
  flowMode = NO_FLOW
  transfer = NONE
}

// Kerbal Space Program - Part Config
// made By Z moded by Me

PART{

// --- general parameters ---
name = greenhouse
module = Part
author = z

// --- asset parameters ---
mesh = model.mu
// entries missing ?


// --- node definitions ---
node_stack_top = 0.0, 1.61, 0.0, 0.0, 1.0, 0.0, 2
node_stack_bottom = 0.0, -1.61, 0.0, 0.0, 1.0, 0.0, 2
node_attach = 1.25, 0.0, 0.0, 1.0, 0.0, 0.0, 1


// --- editor parameters ---
TechRequired = spaceExploration
entryCost = 10400
cost = 4000
category = Science
subcategory = 0
title = GreenHouse
manufacturer = Jeb Co. Light Industreals
description = Garden in a Can kit, assembled and ready to use. Can be used to generate small amounts of power, but its main purpose is sustenance. One greenhouse should be enough for two to four kerbals.

PhysicsSignificance = 1


// attachment rules: stack, srfAttach, allowStack, allowSrfAttach, allowCollision
attachRules = 1,1,1,1,0

// --- standard part parameters ---
mass = 4.5
dragModelType = default
maximum_drag = 0.2
minimum_drag = 0.3
angularDrag = 2
crashTolerance = 6
breakingForce = 200
breakingTorque = 200
maxTemp = 2900

fuelCrossFeed = True


// ---resources and xtras

MODULE
{
	name = ModuleDeployableSolarPanel
	sunTracking = true
	animationName = door
	raycastTransformName = glass
	pivotName = glass
	isBreakable = false
	resourceName = Photosynthesis
	chargeRate = 1

 	powerCurve
 	{
		key = 206000000000 0 0 0
		key = 13599840256 1 0 0
		key = 68773560320 0.5 0 0
		key = 0 10 0 0
 	}
}

//MODULE
//{
//name = ModuleAnimateGeneric
//animationName = door
//startEventGUIName =  Remove Shutters
//endEventGUIName = Close Shutters
//}

MODULE
{
	name = ModuleScienceExperiment
	experimentID = GreenhouseScience

	experimentActionName = Observe Botany Experiment
	resetActionName = Reset Botany Experiment

	useStaging = False
	useActionGroups = True
	hideUIwhenUnavailable = True 
	//animationName = door

	xmitDataScalar = 0.4

	FxModules = 0

	dataIsCollectable = True
	collectActionName = Collect Botany Data
	interactionRange = 2.4
}


RESOURCE
	{
		name = Photosynthesis
		amount = 0
		maxAmount = 1
	}

RESOURCE
	{
		name = BioMass
		amount = 0
		maxAmount = 1
	}
RESOURCE
	{
		name = LifeSupport  
		amount = 0
		maxAmount = 1
	}
RESOURCE
{
	name = ElectricCharge
	amount = 0
	maxAmount = 1
  	isTweakable = false
	hideFlow = true
}
MODULE
{
	name = ModuleGenerator
	requiresAllInputs = true
	isAlwaysActive = true
	INPUT_RESOURCE
      {
        name = Photosynthesis
        rate = 0.001
      }
	INPUT_RESOURCE
      {
        name = Photosynthesis
        rate = 0.001
      }
	OUTPUT_RESOURCE
	{
	   name = BioMass
	   rate = 0.01
	}	
}
MODULE
{
	name = ModuleGenerator
	requiresAllInputs = true
	isAlwaysActive = true
	INPUT_RESOURCE
      {
        name = BioMass
        rate = 0.005
      }
	INPUT_RESOURCE
      {
        name = BioMass
        rate = 0.004
      }
	OUTPUT_RESOURCE
	{
	   name = LifeSupport
	   rate = 0.01
	}	
}

MODULE
{
  name = ModuleGenerator
  isAlwaysActive = false
  activateGUIName = Gasifier ON
  shutdownGUIName = Gasifier OFF
  INPUT_RESOURCE
  {
   name = BioMass
   rate = 0.025
  }
  INPUT_RESOURCE
  {
   name = LifeSupport
   rate = 0.015
  }
  OUTPUT_RESOURCE
  {	  
   name = ElectricCharge
   rate = 1.0
  }
}

}

maxrsp · September 26, 2014

I've built a greenhouse, it uses the greenhouse part at http://forum.kerbalspaceprogram.com/threads/37408-The-greenhouse-module for the model.
Here's the code:

Sorry for the dumb question but is this code for a new part.cfg file? Also what are the Photosynthesis and Biomass resources for? Are they needed? I like this mod over others because it only uses the one new unit (Life Support).

Regardless, if I can get this working I owe you a big THANKS!

spiritplumber · September 26, 2014

The photosynthesys and biomass resources only sit in the greenhouse and are used as "glue logic" and yes it's part.cfg code

Stavell · September 26, 2014

On the thought of Greenhouses I'm trying to figure a balance between fact and SCI-Fiction and playability. very good article about it here http://settlement.arc.nasa.gov/Contest/Results/96/winner/seis.html.

Stuff that is important to note root vegetables have the shortest grow time 20-25 days which if you spaced out planting you could have food each day. and having a composting section return nutrients to the system (with constant electric needed and if lost electric or sun for a short time. You'd lose the whole greenhouse with no way to recover except by bringing in new supplies)

also it takes about 20 trees or 10-15 thousand leaves to generate o2 and scrub co2 per person.

Now with technology I'm sure this will be worked out. (Biosphere 1 and 2 they admitted after a month they had to scrub the air for CO2 to keep it viable and the had 3.15 acres of plants growing)

Now on to game play how to I keep it simple and add the challenge of managing the Biosphere/greenhouse and not make my system more complex - that is what is going on in my head now.

Until I figure it out I like spiritplumber's part mod does a good job, as it works without new code.

Thanks for all the support

Algiark · September 26, 2014

Maybe...

Greenhouse in space: halted or reduced life support consumption.

Greenhouse, landed: life support production.

spiritplumber · September 26, 2014

right now I have it as making enough LS for two kerbals.

jlcarneiro · September 28, 2014

I've built a greenhouse, it uses the greenhouse part at http://forum.kerbalspaceprogram.com/threads/37408-The-greenhouse-module for the model.
Here's the code:
--- SNIP ---

Hello, spiritplumber, how do I add this code and part?

spiritplumber · September 28, 2014

You download the greenhouse mesh, and replace its part.cfg with what I posted.

EladDv · September 28, 2014

0.24.3? lol

jlcarneiro · September 28, 2014

You download the greenhouse mesh, and replace its part.cfg with what I posted.

Thanks! :wink:

maxrsp · September 29, 2014

Thank you spiritplumber for getting us a great interim greenhouse while Stavell works on solidifying his plans for one.

My minimalist OCD kicked in however and I revised / simplified the part.cfg code so that it only produces the Life Support resource (no Photosynthesis or Biomass). I also removed the Botany Experiment and Gasifier functions while adding an Ultraviolet Light so that the greenhouse continues to produce Life Support at the cost of electricity when the sun is not visible (or the shutters are closed). Because I removed the Botany Experiment, it no longer made sense to be in the Science part category so I moved it to Utility.

Here is the revised code if anyone else is interested:


PART{
name = greenhouse
module = Part
author = z

// --- asset parameters ---
mesh = model.mu
// --- node definitions ---
node_stack_top = 0.0, 1.61, 0.0, 0.0, 1.0, 0.0, 2
node_stack_bottom = 0.0, -1.61, 0.0, 0.0, 1.0, 0.0, 2
node_attach = 1.25, 0.0, 0.0, 1.0, 0.0, 0.0, 1

// --- editor parameters ---
TechRequired = spaceExploration
entryCost = 10400
cost = 4000
category = Utility
subcategory = 0
title = GreenHouse
manufacturer = Jeb Co. Light Industrials
description = Garden in a Can kit, assembled and ready to use. 
PhysicsSignificance = 1

// attachment rules: stack, srfAttach, allowStack, allowSrfAttach, allowCollision
attachRules = 1,1,1,1,0

// --- standard part parameters ---
mass = 4.0
dragModelType = default
maximum_drag = 0.2
minimum_drag = 0.3
angularDrag = 2
crashTolerance = 6
breakingForce = 200
breakingTorque = 200
maxTemp = 2900
fuelCrossFeed = True

MODULE
{
  name = ModuleDeployableSolarPanel
    animationName = door
 sunTracking = true
 raycastTransformName = glass
 pivotName = glass
 isBreakable = false
 resourceName = LifeSupport
 chargeRate = 0.0005

  powerCurve
  {
  key = 206000000000 0 0 0
  key = 13599840256 1 0 0
  key = 68773560320 0.5 0 0
  key = 0 10 0 0
  }
}

MODULE
{
 name = ModuleGenerator
 requiresAllInputs = true
 isAlwaysActive = false
    activateGUIName = UV Lights ON
    shutdownGUIName = UV Lights OFF
 INPUT_RESOURCE
      {
        name = ElectricCharge
        rate = 4
      }
 OUTPUT_RESOURCE
 {
    name = LifeSupport
    rate = 0.000093
 } 
}

RESOURCE
 {
  name = LifeSupport
  amount = 0
  maxAmount = 10

 }
}

EDIT: In UV Light mode with shutters closed it produces a constant 2 units of Life Support per day. With the shutters open the rate of generation varies by all the same factors a solar panel does when generating electricity. I can't figure out how to automatically shut off the UV light when the on-board Life Support capacity of 10 is full... if anyone knows if this can be done please let me know. Thanks!

EDIT#2: Oops, forgot to active suntracking in the code above... fixed.

Edited October 1, 2014 by maxrsp

MaxP · October 4, 2014

Stavell, thanks for mod. Can you make a config for RSS-pods with real-like LS values?

Shania_L · October 4, 2014

How do you mean real life values? This mod rolls all lifesupport into a single resource for simplicity purposes, it is designed to be representative of lifesupport requirements, if you want realism then you should really be using one of the other mods TAC, ECLSS and I believe someone is running IronCross too.

Stavell · October 4, 2014

I understand what he means if RSS are pods model after real life counter parts. He wants the values in days to reflect them example the Lunar module in Apollo missions carried 3-5 days of life support for 2 astronauts which would be 10 units in my Mod. Other Gemini capsules could carry up-to 14 days of life support for 2 astronauts or 28 units in my mod.

Now I'm not using RSS - but if given a link I will look into it and come up with values for you.

MaxP · October 4, 2014

He wants the values in days to reflect them example the Lunar module in Apollo missions carried 3-5 days of life support for 2 astronauts which would be 10 units in my Mod.

Exactly

Now I'm not using RSS - but if given a link I will look into it and come up with values for you.

I thought that you might already have real values in days - it would be easier. But if so, it will not be a problem to do it by myself, just need to search web a bit longer. Thanks

maxrsp · October 4, 2014

Hey Stavell, if I could make a quick suggestion for your OP (knowing a lot of people only read the OP before moving on) you may want to highlight and link the Universal Storage addon for your mod as well as maybe a link to spiritplumbers page 3 greenhouse post.

Don't be afraid to show-off the full scope of this great little mod so far

therealcrow999 · October 4, 2014

Is there a general config that someone made or is available that adds this resources to other mods? I know there is a HGR one, but I use a lot of other mods that have capsules and space station parts. Like a one config file.

GeoPhizzix · October 4, 2014

This is an MM file I did that adds the resource to any part that has a crew capacity.


@PART[*]:HAS[#CrewCapacity[1]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 6  
	maxAmount = 6
}
}

@PART[*]:HAS[#CrewCapacity[2]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 12  
	maxAmount = 12
}
}

@PART[*]:HAS[#CrewCapacity[3]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 18  
	maxAmount = 18
}
}

@PART[*]:HAS[#CrewCapacity[4]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 24  
	maxAmount = 24
}
}

@PART[*]:HAS[#CrewCapacity[5]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 30  
	maxAmount = 30
}
}

@PART[*]:HAS[#CrewCapacity[6]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 36  
	maxAmount = 36
}
}

@PART[*]:HAS[#CrewCapacity[7]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 42  
	maxAmount = 42
}
}

Additionally, here is a tank for Procedural Parts.


PART
{
	RequiresAssembly = IFILifeSupport

	// --- general parameters ---
	name = proceduralTankIFIL
	module = Part
	author = AncientGammoner, NathanKell, Swamp Ig, OtherBarry

	// --- asset parameters ---
	MODEL
	{
		model = ProceduralParts/Parts/cylinderTank
		scale = 1,1,1
	}
	scale = 1
	rescaleFactor = 1

	// --- node definitions ---
	node_stack_top=0,0.5,0,0,1,0,1
	node_stack_bottom=0,-0.5,0,0,-1,0,1
	node_attach=0,0,0.5,0,0,-1,1

	// --- editor parameters ---
	cost = 4000
	TechRequired = survivability
	entryCost = 4000
	category = Utility
	subcategory = 0
	title = Procedural Life Support Tank
	manufacturer = Kerbchem Industries
	description = Made from viscoelastic nanopolymers (which were discovered by accident... growing in the back of the office mini-fridge) this fuel tank can be stretched to accommodate life support in a range of sizes and shapes. Hardens to a rigid structure before launch!

	// attachment rules: stack, srfAttach, allowStack, allowSrfAttach, allowCollision
	attachRules = 1,1,1,1,0

	// --- standard part parameters ---
	mass = 1.2
	dragModelType = default
	maximum_drag = 0.2
	minimum_drag = 0.2
	angularDrag = 1
	crashTolerance = 12
	breakingForce = 500
	breakingTorque = 500
	maxTemp = 3200


	MODULE
	{
		name = ProceduralPart
		textureSet = PlainWhite

		TECHLIMIT {
			name = survivability
			diameterMin = 0.1
			diameterMax = 1.5
			lengthMin = 0.1
			lengthMax = 0.5
			volumeMin = 0.1
			volumeMax = 1.0
		}

		TECHLIMIT {
			name = heavyRocketry
			diameterMax = 3.0
			volumeMax = 3.0
			lengthMax = 1.0
		}

		TECHLIMIT {
			// Make everything unlimited for metaMaterials
			name = metaMaterials
			diameterMin = 0.01
			diameterMax = Infinity
			lengthMin = 0.01
			lengthMax = Infinity
			volumeMin = 0.01
			volumeMax = Infinity
		}
	}
	MODULE
	{
		name = ProceduralShapeCylinder
		displayName = Cylinder
		TechRequired = start
		TechObsolete = advConstruction

		length = 0.25
		diameter = 1.25
	}
	MODULE 
	{
		name = ProceduralShapeCone
		displayName = Cone
		TechRequired = generalConstruction
		TechObsolete = advConstruction

		length = 1.0
		topDiameter = 0.625
		bottomDiameter = 1.25
	}
	MODULE 
	{
		name = ProceduralShapePill
		displayName = Fillet Cylinder
		TechRequired = advConstruction

		length = 1.0
		diameter = 1.25
		fillet = 0.25
	}
	MODULE 
	{
		name = ProceduralShapeBezierCone
		displayName = Smooth Cone
		TechRequired = advConstruction

		length = 1.0
		topDiameter = 0.625
		bottomDiameter = 1.25
	}
	MODULE
	{
		name = TankContentSwitcher
		useVolume = true


		TANK_TYPE_OPTION 
		{
			name = IFILifeSupport
			// This is the dry mass of the tank per kL of volume.
			dryDensity = 0.25
			RESOURCE
			{  
				name = LifeSupport  
				unitsPerT = 64.8 
			}
		}
	}
}

Edited October 5, 2014 by GeoPhizzix

therealcrow999 · October 5, 2014

This is an MM file I did that adds the resource to any part that has a crew capacity.


@PART[*]:HAS[#CrewCapacity[1]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 6  
	maxAmount = 6
}
}

@PART[*]:HAS[#CrewCapacity[2]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 12  
	maxAmount = 12
}
}

@PART[*]:HAS[#CrewCapacity[3]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 18  
	maxAmount = 18
}
}

@PART[*]:HAS[#CrewCapacity[4]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 24  
	maxAmount = 24
}
}

@PART[*]:HAS[#CrewCapacity[5]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 30  
	maxAmount = 30
}
}

@PART[*]:HAS[#CrewCapacity[6]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 36  
	maxAmount = 36
}
}

@PART[*]:HAS[#CrewCapacity[7]]:Final
{
 	MODULE
{
	name = IFILifeSupport
}
	RESOURCE
{  
	name = LifeSupport  
	amount = 42  
	maxAmount = 42
}
}

Additionally, here is a tank for Procedural Parts.


PART
{
	RequiresAssembly = IFILifeSupport

	// --- general parameters ---
	name = proceduralTankIFIL
	module = Part
	author = AncientGammoner, NathanKell, Swamp Ig, OtherBarry

	// --- asset parameters ---
	MODEL
	{
		model = ProceduralParts/Parts/cylinderTank
		scale = 1,1,1
	}
	scale = 1
	rescaleFactor = 1

	// --- node definitions ---
	node_stack_top=0,0.5,0,0,1,0,1
	node_stack_bottom=0,-0.5,0,0,-1,0,1
	node_attach=0,0,0.5,0,0,-1,1

	// --- editor parameters ---
	cost = 4000
	TechRequired = survivability
	entryCost = 4000
	category = Utility
	subcategory = 0
	title = Procedural Life Support Tank
	manufacturer = Kerbchem Industries
	description = Made from viscoelastic nanopolymers (which were discovered by accident... growing in the back of the office mini-fridge) this fuel tank can be stretched to accommodate life support in a range of sizes and shapes. Hardens to a rigid structure before launch!

	// attachment rules: stack, srfAttach, allowStack, allowSrfAttach, allowCollision
	attachRules = 1,1,1,1,0

	// --- standard part parameters ---
	mass = 1.2
	dragModelType = default
	maximum_drag = 0.2
	minimum_drag = 0.2
	angularDrag = 1
	crashTolerance = 12
	breakingForce = 500
	breakingTorque = 500
	maxTemp = 3200


	MODULE
	{
		name = ProceduralPart
		textureSet = PlainWhite

		TECHLIMIT {
			name = survivability
			diameterMin = 0.1
			diameterMax = 1.5
			lengthMin = 0.1
			lengthMax = 0.5
			volumeMin = 0.1
			volumeMax = 1.0
		}

		TECHLIMIT {
			name = heavyRocketry
			diameterMax = 3.0
			volumeMax = 3.0
			lengthMax = 1.0
		}

		TECHLIMIT {
			// Make everything unlimited for metaMaterials
			name = metaMaterials
			diameterMin = 0.01
			diameterMax = Infinity
			lengthMin = 0.01
			lengthMax = Infinity
			volumeMin = 0.01
			volumeMax = Infinity
		}
	}
	MODULE
	{
		name = ProceduralShapeCylinder
		displayName = Cylinder
		TechRequired = start
		TechObsolete = advConstruction

		length = 0.25
		diameter = 1.25
	}
	MODULE 
	{
		name = ProceduralShapeCone
		displayName = Cone
		TechRequired = generalConstruction
		TechObsolete = advConstruction

		length = 1.0
		topDiameter = 0.625
		bottomDiameter = 1.25
	}
	MODULE 
	{
		name = ProceduralShapePill
		displayName = Fillet Cylinder
		TechRequired = advConstruction

		length = 1.0
		diameter = 1.25
		fillet = 0.25
	}
	MODULE 
	{
		name = ProceduralShapeBezierCone
		displayName = Smooth Cone
		TechRequired = advConstruction

		length = 1.0
		topDiameter = 0.625
		bottomDiameter = 1.25
	}
	MODULE
	{
		name = TankContentSwitcher
		useVolume = true


		TANK_TYPE_OPTION 
		{
			name = IFILifeSupport
			// This is the dry mass of the tank per kL of volume.
			dryDensity = 0.25
			RESOURCE
			{  
				name = LifeSupport  
				unitsPerT = 64.8 
			}
		}
	}
}

Thanks I will use this or go off it for my own game. I think the only thing I might add is only has crew and a command module.

GeoPhizzix · October 5, 2014

Thanks I will use this or go off it for my own game. I think the only thing I might add is only has crew and a command module.

Yeah, that makes sense as well. My thinking in adding to all, was for science modules and station parts that were not command oriented containing some sort of life support within them. Glad I could help

therealcrow999 · October 5, 2014

Yeah, that makes sense as well. My thinking in adding to all, was for science modules and station parts that were not command oriented containing some sort of life support within them. Glad I could help

Yeah a player could go either way, makes use of the LS parts more to use this type:

@PART[*]:HAS[@MODULE[ModuleCommand],#CrewCapacity[1]]

How did you come up with these numbers:

1 crew = 6 LS

2 crew = 12 LS

3 crew = 18 LS

The general idea going up by 4's. It makes more sense to have something so common and someone like me who is OCD is happy.

The ModuleManager_Squad.cfg didn't make sense to me, if it did I would of made the universal MM config myself.

1 crew = 7 LS

2 crew = 12 LS

3 crew = 14 LS

I pretty much deleted ModuleManager_Squad.cfg and used yours, I like simplicity, comes with OCD, lol.

EDIT:

I see why you used those numbers it keeps with the 6.04 days of Life Support. So even if you have a 1 crew man pod, it will have the same amount of LS days as a 3 man pod. This config should be really used in replacement of the other ModuleManager_Squad.cfg, since everyone these day use a multitude of different mods.

Edited October 5, 2014 by therealcrow999

therealcrow999 · October 5, 2014

Yeah, that makes sense as well. My thinking in adding to all, was for science modules and station parts that were not command oriented containing some sort of life support within them. Glad I could help

I think I will use your config file. Makes sense with science modules and station parts.

GeoPhizzix · October 5, 2014

How did you come up with these numbers...
EDIT:
I see why you used those numbers it keeps with the 6.04 days of Life Support. So even if you have a 1 crew man pod, it will have the same amount of LS days as a 3 man pod. This config should be really used in replacement of the other ModuleManager_Squad.cfg, since everyone these day use a multitude of different mods.

That really all I did, I saw the trending value of 6 and ran with it. With the PP tank, the Unit/Ton, just happened to fall into the 6.4 by happenstance. Like you, my OCD and need to streamline/simplify kicked in

[Release][V3.2][KSP 1.2] Interstellar Flight Inc. - Kerbal Life Support Mod

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation