Carbal

I have two available actually. But, how would I use a single thing that fulfills an orbital station around Kerbin and the Mun? Wouldn't that require an incredibly huge rocket? I assume I would have stages where I "break away" from one of them (perhaps leaving one station in orbit around Kerbin, continue on to the Mun, set that up, then go to the Space Center and choose the "break away" ship and Fly that?). I think I get the whole docking/rendevous thing, but how do I even get an "ISS" (or "KSS") into Orbit to begin with? In your video, I assume you launched a few rockets to build your Kerbonational Space Station?

Thanks for y'all's replies! I am watching your Rendevous/Docking tutorials now 5thHorseman (I've actually come across them before, but wasn't ready for them). Thanks for the info about the satellites - I wish they were more applicable aside form basically just looking neat orbiting Kerbin. I'm still looking to set up some refueling stations on the Mun, but will need to keep searching for Base tips/tutorials first. Thanks for the help/advice so far!

Howdy! I have been playing KSP for a month or so now and have been able to do some basic contracts, such as landing on the Mun, Minmus, and even Duna. However, I hit a major "kerbal writers block" when trying to build satellites or, more especially, a Mun base. I have been Googling/YouTubing around for some good tutorials on how to build a Mun base, with attachments, room for 5+ Kerbals, etc. but haven't found any that aren't seemingly made in Sandbox mode where money is no issue. Are there any good resources an amateur Kerbonaut like myself can use to help learn to build simple space bases, satellites, docking, and how to use the Space Hangar? So far all I've built are rockets, because I go to the space port and have NO idea how to build anything that will do any good not flying around Kerbin. Essentially, I did pretty well learning the basics, can orbit/land on some closer planets/muns, but hit a mental block trying to do anything else (in Career mode, where money is a factor). Second, a little related, question - if I build a satellite and have it orbit Kerbin with some antennas, solar arrays, etc. will that actually do anything? I see all these

Noted, thanks. To the Mun! Edit: For the record, apparently I have to spread some reputation around before giving more to you again

Thanks! I'm in Career mode and don't have spaceplanes available yet, so will just use rockets to get to the area via navigation. It's just tough to hone in on the exact area, but (as with most things in KSP) it'll just take time and many tries.

I'll look in to those (that in-flight waypoints sounds fantastic)! But say I wanted to run to the target (say I was like 500m away), there's not a stock way of doing it really?

Hello, I have been struggling to get two surface samples for a contract. I have landed my lander super close, but am apparently not close enough - how can I get to these areas? I have been wandering around randomly sampling the ground but haven't found the proper spots and am going crazy . If you can't zoom in and such, any tips on getting there in a more efficient way than literally walking around. I have also discovered that if I walk around (or run with Shift) and time warp to level 4, I often times just fall into Kerbin and die (??!) so I can't really zoom around. Here's how close I am: ..but walking around doesn't really provide any waypoints:

Thanks everyone for your input - I'll try to use the suggestions. I haven't used a spaceplane before (I can barely take off), but I will definitely check that out as well.

Howdy, I have a contract to do some temperature readings in an area that is just about on the opposite side of Kerbin, but a little more north. I have learned to Orbit, have landed on the Mun and Minmus, but can't really figure out an efficient way to get around Kerbin. So far, I have failed (even using MechJeb to auto orbit and auto land at a place on the map). What am I not getting, I would think this isn't too hard, after all, I'm staying on Kerbin and not going to the Mun - but I'm having a harder time doing this . I've tried with this ship, which I thought is surely overkill: and here's where I'm trying to go (to any one of those markers): Basically, I start out and can try to kind of head north, but never seem to be able to break through efficiently...I burn tons of fuel. Any tips/ideas? Using or not using MechJeb...Thanks for any advice!

Thanks for the tip - with MechJeb how would I do that with AutoPilot? and tg626, thanks as well. I made sure to put some battery packs on the bottom most fuel tank to ensure I have enough power (after I posted those screenshots, I thought the same thing).

Will try disabling RCS, thanks. Ah, I forgot to delete those messages (they're all completed project/mission messages though :thumbsup: ) I've added one inline rotation wheel to each of the four outer rockets, and one in the main stack. Trying now and will report back. Edit: Aha!! It works now! I believe it was the inline reaction wheels that did it and allowed enough torque. Thanks so much for your help!

Thanks for the reply! Noted about the ~75km orbit. I tried again, setting 73km orbit, and same issue. I have fuel as well, so that's not the issue...I have attached screenshots of the ship/probe and can post the .craft if you'd like. NOTE: Sorry I forgot to mention, I'm in the "Science" career mode but I believe I have the required MechJeb stuff unlocked, I'm pretty far along in R&D but let me know if you'd like a screenshot of my progress there... Screenshot of the ship: All is going well, the first two rockets are jettisoned: Apoapsis reaches target altitude and even creates the node automatically for orbit: ...but then the ship passes the node and falls:

Howdy, I have learned how to orbit Kerbin and have even made it to Minmus and the Mun and back. I just discovered MechJeb and am trying to learn how to auto-orbit around Kerbin. I have my unmanned probe and enable the Auto Ascent and set the orbit to 100 km (I've also tried 90 and 80). I engage auto pilot and launch off. Once I launch, the probe accurately reaches the apoapsis at 100km, and then I see a node get created and it's correctly set to orbit Kerbin at 100km (give or take a few km). However, when the rocket approaches the node where you should start up the rockets again ...nothing happens. The ship just starts falling back down to Kerbin. Is that because maybe my ship isn't build very well, or am I missing something? Thanks for any help/ideas! Answer: As sarmagheddomsgw points out, there likely wasn't enough torque recognized by MechJeb, so I added advanced inline rotation wheels to each of the rocket stacks and it works!

Yeah, I have a login and can login to the Patcher. Noted about the download from the site, I believe it's up to date anyways (I'm having other issues with "crew reports" in game so thought the patcher might help). I'm currently reinstalling KSP.

Thanks for the help. I added the Patcher.exe to the list of allowed programs in the firewall, get the same error. I also tried running the patcher as Administrator, same error. Do you know where in the event viewer the error would be logged? (Windows 7). I looked and couldn't find anything readily apparent. Here's a little more info

Hi LordFerret. Yeah, that's what I thought too, but something has gone awry... So I tried again, and I still can't get a crew report or take the data into the capsule. Here's a gif of the process (I create a new career, choose the Mk1, and then Launch, then on the pad can't do crew report, so I EVA to collect science, try to get back in capsule): (I made the quality lower so the gif would load quicker - if you'd like a better screenshot, just let me know). Would it have anything to do with the "NASAmission" and "Squad" folders in GameData? And FYI I have v0.25.0.642 Edit: I've been scouring the internet and can't seem to find a solution, so in the mean time I'm going to completely uninstall and reinstall and will report back. Reporting back - So, I uninstalled KSP then reinstalled (using the Installer this time from the site) - and now I can do crew reports! How odd - I wonder what the deal was. Same version as before and everything. Hm, I guess I'll never know. Thanks a lot though for y'all's help!

Thanks for your reply! For the experiments part - I literally start the game, start a new career, get an MK1, have one Kerbal in there and go to launch pad. Shouldn't I be able to take things in the pod? If not, I guess I don't get what you mean by the biome. For the crew report, the Kerbal is in the command pod. Hmm...I will launch the game and take a few screenshots. FYI I have "NASAmission" and "Squad" in the GameData folder (not sure if that matters).

Hello, When I try to run the patcher, I get an error ending with "rsync exited with code 10: Error in socket I/O". Any ideas why? I just installed KSP yesterday... (Windows 7)

I am trying to do the very first thing in the Career mode - create a lone Command Pod mk1 and explore the launch pad with the Kerbal, get EVA data and do a crew report. First, I do not seem to have "Crew Report" option available when I click the command pod. Second, when I walk and collect my EVA report, and try to get back in the MK1, I get the notice "Experiments you have collected cannot be stored on this COmmand Pod Mk1". Any ideas why? This is the first thing you do in the Career mode, but I don't seem to have the options to even get started. Thanks for any tips or ideas. (Note: This is "regular" career mode, not the Science one). I just downloaded the newest KSP yesterday and am getting this. I can't patch because the Patcher is giving an error (different question for another time). But why can't I do crew reports, or take experiments into the Mk1? Thanks for any advice! Please let me know if I left out some crucial info... [Answered - I just uninstalled and reinstalled KSP and it's working now!]