Hoaz
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Developer Articles
KSP2 Release Notes
Bug Reports
Posts posted by Hoaz
-
-
Ah cool.10x Kerbol is the opposite. It's the Kerbin system scaled up by a factor of 10 (to roughly real life sizes, to make planetary densities sane).Oh also, is there a way to minimize the planets? They are too big for me atm. I like all the mods, but it feels pointless when I can only reach orbit
I want to start easy (with the mods). I tried downloading all the mods but the big planet mod for a clean version of KSP. It didn't work very well. Nothing was optimized and tweakscale did not work very well a lot of things were messed up. So I am turning to you, is there a way to remove/disable the big planet add-on?
-
Ok, my bad... I looked at my notes and suddenly realized that I used to play the 10xKerbol config
... I am definitely not flying an optimal trajectory because I am playing the RP-0 - Realism Overhaul and I am launching a satellite with 1958 technology. My TWR for the second stage is very low, but it is the only rocket config I could find that would keep me below the 18t weight limit.
What is 10X Kerbol config? Is it 10x the size? Or 10X... well I don't know...
Anyway... What is it. If it kerbal size, where do I find it? -
FOUND THE GUIDE (main post).
Wee, launched my first Satellite into orbit.. Was not easy.. but it is there.
-
Any tutorial to help me get into orbit? I either seem to blow up in the atmosphere (deadly reentry truly shines there), OR I don't get high enough to get into orbit ;-( I want to know how to build a stable rocket. Thank you!
Oh also, how are you guys dealing with the RAM issues for the 32 bit? Any parameters or have you lowered the graphics a bit?
-
Hey. When I tried downloading from CKAN. Some of the mods in the pack will return "forbidden" and will fail and ultimately crash CKAN.
These are the following mods that return the follow error:
RealSolarsystem, Deadlyreentry, Procfairings, Tweakscale and CustomBiomes.
I will keep retrying until ... oh nvm... seems to be fixed now. I just installed all... Well anyway. IT was a temporary issue. Some files may be corrupt. I shall take it out for a spin and see how it fairs.
-
Hey. I am loving this pack. However, the size of kerbin makes it really hard for me to play as I haven't mastered the normal solar system yet. Is there a way to maybe tone down the massive solar system to kerbal size? I tried removing the Solar system mod, but then the game wouldn't start.
Oh also, The game seem to run out of memory really quickly unless I add the -force-opengl parameter to steam. However, this makes the edges ragged. Is there a better way to reduce the amount of RAM the MODs use? (I tried using 64 bit KSP, but that would not even start ;( )
Thanks,
Hoaz.
-
Oh, the new kids who weren't here in the x32 "jurassic PC" era...
KSP runs as a x32 program (x64 is currently unstable for most people). That means that, no matter how much RAM your system has, your game can only use the RAM's addresses up to the index of 4GB. And that's competing with any programs that also use that range, including the OS; Which results in an actual usable range of around 3-to-3.5GB.
*facepalm* No, I am very well aware of that. But I was telling him "How am I using too much ram" and then I stated how much RAM I currently have installed, as the RAM is an important piece of information regarding issues. Now, the RAM was never the problem in this case either. It was corrupt files and I have since fixed the issue.
-
how am I using too much ram? I have 18GB of ram.. more than enough lol... and I fixed the issue. IT was corrupt files.
-
EDIT: During initialization of the real solar system it will always crash on Editing body: Duna (6/17) PQS Duna. Always.
EDIT2: no longer crashes on Duna (6/17) PQS Duna. Now gets stuck on Editing body: Eeloo (11/17)
PQS Eeloo
Add PQSMod_VertexColorMapBlend. Worth noting that it doesn't crash here, it just .. doesn't initialize.
EDIT 3: it seems to be random, but mostly crashes on 11/17 now. Do you need the error.log or the out_putlog?
please help! ;-)
Thanks,
Hoaz.
-
HI! I have run into an issue. Whenever I launch the game it'll go through the Real solar system process (where it applies the addon, you can see stuff happening in the background). But it always crashes at the same spot in the process. I need help. Du you want the error.log or the output_log.txt?
-
Hey, I managed to 'solve' the issue. As I believed it was TIMED based, I figured if I redo it over and over again eventually all the files will be cached and it'll carry on straight to the installing process, which it did! After 4 or so tries I had finally installed all the required mods.
Despite the fact that I solved it. IT is just a temporary solution and should be looked into regardless. -
Hey thanks for the reply PJF. I was wondering, however, how do I access the command-line through CKAN?
-
Step 1) Get a fresh install of KSP (delete everything in steam folder and reinstall)
Step 2) put CKAN.EXE in the installation folder of KSP
Step 3) MAKE SURE you throttle your download speed to say 1 mb/s for CKAN.exe
Step 4) Run CKAN.exe, REFRESH and find your way to "Realism Overhaul"
Step 5) Check the "installed" box and press "go to changes"
Step 6) Press Continue on the first page
Step 6.1) Uncheck the TACLS on the second page and proceed
step 6.2) Make sure nothing is checked on the third page and proceed
Step 7) Wait and pretend it is a normal process.. Towards the end of the download (sometimes it can carry into the installation process) The error posted earlier will pop up. Prompting you to dismiss it. Pressing dismiss will crash CKAN.exe.
KSP version 0.90 - Steam edition
WIN 7 64 BIT
18 GB DDR3 1600 Mhz
(yes I have more than enough space to download the mods)
I believe it is a timed error. Good luck!
Sincerely,
Hoaz.
-
Hey Hoaz, how's it going? Is the issue still present? If so, I encourage you to open a github ticket, it's harder for us to miss / forget it
Hey. it still persists, but there is something peculiar about it. So, I tried downloading something on steam at the same time and , of course, my download went significantly down on CKAN (as expected)... but the error still happened. This time it happened a lot earlier into the download. The error seems to be based on time. After a certain amount of time has passed the error I posted above will pop up. Of course, downloading larger packs like the Realism Overhaul would prompt me that error. Is there anything you could do? Thanks! also, I will post a ticket just in-case ;-)
EDIT: Sorry, I cannot make a ticket because I am not a registered member on github. I certainly hope you'll notice this post! Thanks.
-
Alright, I seem to have fixed the issue. So it was probably something to do with the downloading. THough it did happen every single time when I tried to download the full thing. Anyway. After it had downloaded all the mods and crashed. I went back in and downloaded again (this time most of them had cached). It went through the install and it all worked fine... hopefully. I hope nothing is corrupt. But we'll see!
-
I'm not one of the developers, but a little more information would be helpful:
OS you are running (win32, win64, OSX, Linux)? If windows, which version?
Version of KSP (0.25, 0.90, 32 bit or 64 bit)
How much memory you have?
It appears that you are running on Windows, based on the file name. It is trying to access a file, but the file is unavailable due to being used by another process.
I'd suggest rebooting and trying again.
Hey, thanks for responding. I am running KSP steam edition so 0.90. I am running windows 64 BIT (but KSP.. idk it has both 64bit and 32bit.exe file in the KSP folder (I suppose steam launches it in 32BIT)
EDIT: Rebooting did not help.
I have 18GB of DDR3 RAM at 1600 Hz.
I am trying to reboot the system. I'll report back should the installation fail again. Thank you.
-
hey. I have run into issues with CKAN. I get this error during the installation process
Thanks in advance,
Hoaz.
-
well the error pops up towards the end of the DOWNLOADING process.
I wonder. Should I try to download all the mods individually through CKAN and then do the installation through CKAN? Then it will have all the files cached?
hmm... it seems to fail at Custombiomes download part.
Where do I get the Custom biomes part listed? I tried using CKAN. Got 3 results for the same addon.
EDIT: It wasn't custombiomes. Seems to be related to CKAN
-
That is very bizarre. I can't say I've seen it before, have you tried downloading the latest functional release from here? https://github.com/KSP-CKAN/CKAN/releases
That is where I downloaded it from... I am using the steam edition of KSP. I plonked the .exe file into the steam KSP folder and then launched it.
-
As DoctorJOn said... I disabled all of those and now I got this error "Unhandle exception: System.Transactions.TransactionException: Fail... " You know what, here is an imgur picture of the full error message:
Pressing "DISMISS" Will crash CKAN.exe
-
Hi again. Sorry if I sound a bit like an idiot... but I am still having the same issues :S Is there an update for CKAN I need to install?
AHA! I found the conflicting addon... it is TACLS one (config)
Thanks for your work,
Hoaz.
-
Thank you for your amazing mods.
I am happy to wait for CKAN to install as I am a newbie when it comes to installing mods for KSP Sincerely,
Hoaz..
-
Bug report with CKAN installation
Hey, I just recently tried installing realism overhaul through CKAN. I check the box for Realism overhaul, went to "Go to changes" tab and continued. Everything enabled on the recommended page
A few mods enabled on the suggestion page. After that I pressed continue and it started the install... Except for in the beginning it comes up with
"About to remove:
Done!
Module TACLS required, but not listed in index, or not available for your version of KSP
Error!
"
So... I tried uncheck the TACL mod... then that error disappeared but then another mod had the same issue (Biome addon) and then tried disabling that.. and another mod. Seems like all the mods are conflicting.
Is there any way of fixing this?
Thanks,
Hoaz
I want to start easy (with the mods). 
... 
I am happy to wait for CKAN to install as I am a newbie when it comes to installing mods for KSP
[1.1.2] Realism Overhaul v11.0.0 May 8
in KSP1 Mod Releases
Posted
I had the same issue. What I did, isntead of getting the 8k by 4k texture "pack" for realism, I went with one step below. It worked fine. No issues. The 8k by 4k would work if you were to play the 64 bit version (which supports more RAM). The 64 bit version, however, is quite bugged and will not start if you have all those mods installed (I've tried).