so I've been messing around with the p3_target40x20.txt file {1:"Target: ";"";""}{0}{1:;"Target: [#ffffff30]NO TARGET";""} $&$ TARGETNAME TARGETEXISTS {2:;" ";""}Dist: {0:SIP_6.3}m Vel: {1:SIP_6.3}m/s $&$ TARGETDISTANCE APPROACHSPEED TARGETEXISTS {3:;" ";""}R.Ang X: {0,6:0.00}° Y:{1,6:0.00}° Z: {2,6:0.00}° $&$TARGETANGLEX TARGETANGLEY TARGETANGLEZ TARGETEXISTS {0:;;" Please select a reference part "} $&$ ISREMOTEREFERENCE {0:;;" in target management menu. "} $&$ ISREMOTEREFERENCE {0:;" ";""} [#ffffff77][@x-{1:0.0}][@y-{1:0.0}]¢ [@x{1:0.0}][@y-{1:0.0}]¡ $&$ TARGETEXISTS TARGETANGLEDEV {0:;" ";""} [#ffffff77][@x-{1:0.0}][@y{1:0.0}]¤ [@x{1:0.0}][@y{1:0.0}]£ $&$ TARGETEXISTS TARGETANGLEDEV [B]{0:;" ";""} D:{1:SIP_6.3}m $&$ TARGETCLOSESTAPPROACHDISTANCE TARGETEXISTS {0:;" ";""} T:{0:METyy:ddd:hh:mm:ss.f}s $&$ TARGETCLOSESTAPPROACHTIME TARGETEXISTS[/B] {0:;" ";""} R.Velocity R.Distance $&$ TARGETEXISTS {2:;" ";""} X:{0:SIP_8.3}m/s X:{1:SIP_6.3}m $&$TGTRELX TARGETDISTANCEX TARGETEXISTS {2:;" ";""} Y:{0:SIP_8.3}m/s Y:{1:SIP_6.3}m $&$TGTRELY TARGETDISTANCEY TARGETEXISTS {2:;" ";""} Z:{0:SIP_8.3}m/s Z:{1:SIP_6.3}m $&$TGTRELZ TARGETDISTANCEZ TARGETEXISTS ________________________________________ SAS:{0,-6:"[#00ff00ff]Active[#ffffffff]";0;Off}| RCS:{1,-6:"[#00ff00ff]Active[#ffffffff]";0;Off}| {2:####.##;;"[#ff0000ff]!Empty!"}$&$ SAS RCS SYSR_MONOPROPELLANT so data is showing up on the monitors just not the right data (I'm not 1m away from the target or 33 minutes out). I've been reading the page definition files on the dev manual but its a little beyond me. A little help would be appreciated