Search the Community
Showing results for tags '6 turning'.
The search index is currently processing. Current results may not be complete.
-
I wanted to build something similar to the Convair B-36 bomber, using stock KSP with the Breaking Ground Expansion. I also use the Making History Expansion. The B-36 was a heavy bomber, conceived when jet engines were borderline science-fiction. The original version had 6 piston engines driving 6 propellers. Later, when they decided jet engines might work for airplanes, they just tacked four jet engines onto the B-36, on twin-engine pylons towards the wingtips. So the B-36 ended up having 6 radial piston engines with propellers, and 4 jet engines, hence the phrase "Six Turning and Four Burning!" It's a goofy concept, but apparently it actually worked fairly well. Here's my attempt at making something similar in stock KSP. The actual B-36 used it's jet engines for takeoff (after they added them..), but my example is capable of taking off using the propeller engines only. Each engine has 8 of the "B" size propellers. At 1,000M each engine only needs about 15% Torque to maintain max rpm (460). Turning the torque down to 15% gives me a total Fuel Flow of about (0.25), and a cruise speed of about 125 m/s. This next shot is at ~4,000M, so the speed is a little slower and the FF is a little lower. In this shot, I'm at 10% torque, still maintaining 460 rpm. Here's a shot of "Six Turning Four Burning". Running the jet engines greatly improves takeoff performance, and helps zoom you up to altitude. I have the torque tied to the main throttle, so I'm wasting gas here by running the turboprops at 100% torque- 20% would be plenty to get full power. Here's a side-view. As anyone who has built long airliners in KSP can attest, the takeoff can be tricky. If you rotate too much during takeoff, the tail of the plane hits the runway, usually leaving you with about half an airplane! On this one, I have the gear mounted low enough I can rotate to about 15 degrees without hitting the tail. Interestingly, this plane actually flies just fine even after losing everything aft of the wings! I had some CG/CL issues, which I corrected by adding Canards to the front. You can't see the canards because I rotated them into the fuselage, hiding them. But, they still work (thanks to KSP's take on aerodynamics), and have enough authority to control the pitch of the plane even after I lose the entire tail during takeoff.