Search the Community

Description The Sister Unit of MS-03 Xanthus the MS-03 Balius. Built for Space combat after needing a new unit that can have High Mobility but needs to also have the armor and weapon systems of her sister unit. Just like MS-02 Zephyr Prototype the Skeleton frame is based on the same technology which incorporates the same technology and borrowed parts from both units. This produces a groundbreaking upgrade to performance and capability for mass production. Scaled-down version with enhanced mobility and onboard and external weapons to connected to multiple docking ports on arms and shoulders. MS-03 Balius is geared to handle within the Kerbol system to combat Space Pirates and destabilized nation-states. Also can perform in Multi-rolled tasks and can be used for Construction, First Responder, Military application and the list goes on. Able to recover from falls and with a smaller frame means it will be more stable than previous models. Interchangeable parts will allow you to customize and use the mainframe as a stepping stone if you choose. (recommended different head styles to compliment or different hands (default grab units) Action groups have been designated to dedicated KAL9000 Robotics. All parts are fully stock with only using DLC for required usage. No need to download flags if you choose not to but HIGHLY recommended if you want the full look for the mobile suit. KEY FACTS ALL STOCK NO MODS (BOTH DLC NEEDED) Action Groups and Pilot Instructions Toggle SAS and set navigation to Radial Out to walk Toggle RCS and Toggle AG 7 (ski) use trim keys I and H to enter ski mode to slide hover on planets with high gravity planets like Kerbin Space bar (Fire head Particle Cannon make sure to raise face cover using I, K keys) AG1 to Stand AG2 to Walk (Note: Default stable run speed is 1.6 speed at around 4.0 -5.5 m/s can increase to 1.4 and get 6 - 7 m/s but will fall more often) AG3 Sit and Stand animation (Note: can sit on objects and use this to start tilting forward. Once in position, you can hit AG1 to stand up if you fall over. This is also needed to dock and undock Kerbals in the cockpit. AG4 Kneel ( used to conserve energy. Once in a kneeling position, you can turn off SAS as well as use this for stable shots from Particle Cannon. Use this to also let Kerbals board and onboard AG5 Open Canopy AG6 Shielded Gun Mode AG7 Toggle Ski Mode AG9 Rotate Shoulder Mounts AG 0 Toggle RCS Thrusters for High Mobility Further Notes: When launching I recommend using unbreakable parts/crash damage. Has enough energy without needing to use unlimited energy. The Root part to move the unit is the back radial docking port. Attach to docking. Use this to easily dock with other craft to transport this unit to other sites by flying transport aircraft or to take off the planet. It will not fit in a standard MK3 Cargo unit and will need to have a custom cargo bay. Other than that have fun! A stock aircraft called MS-04 Balius. Built with 278 of the finest parts, its root part is strutCube. Built in the SPH in KSP version 1.12.3. Details Type: SPH Class: rover Part Count: 278 Pure Stock KSP: 1.12.3 Downloads! Steam - https://steamcommunity.com/sharedfiles/filedetails/?id=2844691716 KerbalX - https://kerbalx.com/InterstellarKev/MS-04-Balius More Pictures - https://imgur.com/gallery/CoStCPH

Description After the successful prototype of KMS-01, and the groundbreaking work of the MS-02 Zephyr, further R&R results in a much slimmer, scaled-down version with enhanced mobility and onboard and external weapons with mass production capabilities produced the new MS-03 Xanthus. MS-03 Xanthus is geared to handle within the Kerbol system to combat Space Pirates and destabilized nation-states. Also can perform in Multi-rolled tasks and can be used for Construction, First Responder, Military application and the list goes on. Able to recover from falls and with a smaller frame means it will be more stable than previous models. Interchangeable parts will allow you to customize and use the mainframe as a stepping stone if you choose. (recommended different head styles to compliment or different hands (default grab units) Action groups have been designated to dedicated KAL9000 Robotics. All parts are fully stock with only using DLC for required usage. No need to download flags if you choose not to but HIGHLY recommended if you want the full look for the mobile suit. Action Groups and Pilot Instructions Toggle SAS and set navigation to Radial Out Space bar (Fire head Particle Cannon make sure to raise face cover using I, K keys) AG1 to Stand AG2 to Walk (Note: Default stable run speed is 1.6 speed at around 4.0 -5.5 m/s can increase to 1.4 and get 6 - 7 m/s but will fall more often) AG3 Sit and Stand animation (Note: can sit on objects and use this to start tilting forward. Once in position, you can hit AG1 to stand up if you fall over. This is also needed to dock and undock kerbals in the cockpit. AG4 Kneel ( used to conserve energy. Once in a kneeling position, you can turn off SAS as well as use this for stable shots from Particle Cannon AG5 Ready Particle Cannon (press AG 8 to Fire) AG6 Grab Particle Cannon (do this prior before engaging walk mode) AG7 emergency Toggle for ARM AG8 Fire Particle Cannon AG 0 Toggle Cockpit Armor Further Notes: When launching I recommend using Unlimited Energy (all mechs on ksp use a TON of energy you can use it without it does not take long to fully charge) (You can turn on unbreakable parts/crash damage if you would like but I usually run with this off. Make sure if you are falling or tripping over to fall either chest first or back. The main things that will explode are the navigation lights and arms if moving on hard drops.) The Root part to move the unit is the back radial docking port. Attach to docking. Use this to easily dock with other craft to transport this unit to other sites by flying transport aircraft or to take off the planet. It will not fit in a standard MK3 Cargo unit and will need to have a custom cargo bay. Other than that have fun! Download here Steam - https://steamcommunity.com/sharedfiles/filedetails/?id=2841986780 Kerbal X - https://kerbalx.com/InterstellarKev/MS-03-Xanthus Built in the SPH in KSP version 1.12.3. Details Type: SPH Class: ship Part Count: 256 Pure Stock KSP: 1.12.3

MS-02 ZEPHYR - ENHANCED MOBILE SUIT Type: SPH Details Class: ship Part Count: 360 Pure Stock KSP: 1.12.1 Description After the successful prototype of KMS-01, further R&R results in a much slimmer, scaled down version with enhanced mobility and function. Zephyr is geared to handle within the Kerbol system. Multi rolled can be used for Construction, First Responder, Military application and the list goes on. Able to recover from falls and with smaller frame means it will be more stable than previous models. Since using new flag systems for body parts you can customize each aspect of the unit with your own colors. Included will be 3 camos and a multitude of different color packs. ( links will be in description or comment section) Interchangeable parts will allow you to customize and use the main frame as a stepping stone if you choose. (recommended different head styles to compliment or different hands (default grab units) Action groups have been designated to dedicated KAL9000 Robotics. All parts are fully stock with only using DLC for required usage. No need to download flags if you choose not to but HIGHLY recommended if you want the full look for the mobile suit. Ship Color will be the red / white variant of C7 design but please mix and match and use your imagination. (default flag colors are named, window3.png (white), windowtint.png (grey) Red.png (well for red) and Default flag C7 aerospace) Action Groups and Pilot Instructions Toggle SAS and set navigation to Radial Out Gear to toggle Antenna head and AG5 to toggle hidden antenna AG1 to Stand AG2 to Walk (Note: Default stable run speed is 1.6 speed at around 4.0 -5.5 m/s can increase to 1.4 and get 6 - 7 m/s but will fall more often) AG3 Sit and Stand animation (Note: can sit on objects and use this to start tilting forward. Once in position you can hit AG1 to stand up if you fall over. This is also needed to dock and undock kerbals in cockpit. AG4 Kneel ( used to conserve energy. Once in kneel position you can turn off SAS Further Notes When launching I recommend using Unlimited Energy (all mechs on ksp use a TON of energy you can use it without it does not take long to fully charge) (You can turn on unbreakable parts/crash damage if you would like but I usually run with this off. Make sure if you are falling or tripping over to fall either chest first or back. Main things that will explode are the navigation lights and arms if moving on hard drops.) The Root part to move the unit is the back radial docking port. Attach to docking. Use this to easily dock with other craft to transport this unit to other sites by flying transport aircraft or to take off planet. Will not fit in a standard MK3 Cargo unit will need to have a custom cargo bay. Other than that have fun! Download Links Flag Links https://www.dropbox.com/s/kcox4xl96y8rgfo/InterstellarKevs%20Custom%20Flags.zip?dl=0 or download individually https://www.dropbox.com/home/KSP/InterstellarKevs Custom Flags Craft Links https://kerbalx.com/InterstellarKev/MS-02-Zephyr https://steamcommunity.com/sharedfiles/filedetails/?id=2545517240