Search the Community

This is a parts pack that adds a stock alike version of the SLS in 5m size as well as a few Space Shuttle specific parts that will allow you to build the Block I SLS with the complete Orion Spacecraft (CM, SM, and LAS), as well as a full Space Shuttle stack with an External Tank and SRBs that are 5m and 2.25m respectively to be in scale with the Mk3 Spaceplane parts. Note: Delete your old ShadowWorks Install before installing all Updates. Version 2.0.5.1 Waterfall FX Compatibility Updated to Version 2.0!!! A whole lot has changed with this update. Since it took me so long to motivate myself to finish the Jupiter (DIRECT) and Altair Lander parts, and seeing the progress of a lot of other mods I decided that the mod as a whole could use a facelift. With the 50th anniversary of Apollo 11 I was inspired to finally finish the Jupiter and Altair, and complete a near total overhaul of the mod. Nearly every part has been remodeled and retextured, and I have made use of the stock Part Variant module for mesh and texture switching, throttle-based animations to animate the extending nozzle of the RL10B, and the new mapped specular shaders to provide a mirrored Orion capsule. I have also gone through and properly given most (if not all) parts an alias taken from the ancient Egyptian pantheon. I figured, you don't see that very often, so why not. Below is the Change Log for version 2.0, which is extensive, but I may have missed a couple of things. Changes 2.0.5.1 ------------- * Re-added the Connected Living Spaces compatibility patch after accidentally leaving it out of v2.0.5 Changes 2.0.5 ------------- * Added Waterfall FX compatibility patch - converts all engines and RCS thrusters except for SRBs to Waterfall FX. * Fixed texture issue with the 5m Amun-Ra (SLS) Fairing. The texture will now appear correctly in 1.12+. * Updated the SSMEMount part to use transform-based attachment nodes. Changes 2.0.4.1 -------------------- * Added Connected Living Space (CLS) Compatibility (will only work if CLS is installed) Changes 2.0.4 -------------- ISS SAW Fix thanks to @Hachiro * Re-exported the ISS SAW (Solar Array Wing) part * Now uses a single attachment node (no longer surface attach) * PAW text updated for easier readability and more informative operation * Deploying the Array plays the full deployment animation once, while the panels won't actually rotate independently and collect sunlight until they are activated. * Should remain deployed regardless of a packing/unpacking operation, so no more having to redeploy after the game packs and unpacks the vessel. Changes 2.0.3 -------------- Hotfix * Re-exported the following parts to add a basic flat normal as KSP apparently no longer gracefully ignores no normal map for "Bumped..." shaders. * EUS * EUSDecoupler * ICPS * DCSS5m * DCSS5mDecoupler * DCSS4m * DCSS4mDecoupler * AresI * AresIIU * AresIDecoupler * Pyrios * PyriosNoseCone Everything should be back to looking normal. Changes 2.0.2: ------------------------ * DDS texture encoding changed to DXT5 from DXT3, so textures should show up again! * Removed duplicate TGA textures that have DDS versions in the SRBs folder. * Removed the SLS Engine Mount as a separate part, as it really isn't needed any longer. Changes 2.0.1: ------------------------ * Altair Landing Legs will now show up in the career tech tree under "advLanding" Changes 2.0: --------------------- Removed: * External Tank Nose Cone * External Tank * External Tank End Cap * These three were replaced with two tanks (see Additions) * File: "_ShadowWorks_RealChutes.cfg" Removed * File: "_ShadowWorks_FSTextureSwitching.cfg" Removed * SLS 5m - 3.25 m Adapter (Orion can be attached to the EUS using the SLS 5m Fairing Base No Payload variant. Additions: * MOARdV Avionics Systems compatibility patches adding functioning MFDs and other controls to the Orion and Altair IVAs. Also adds a camera and docking radar to the NASA Docking System (NDS) 0.9375m docking port. * ModulePartVariant: * SLS Core Stage * Bare Orange Insulation * Black and White Painted * ICPS Decoupler * Bare Orange Insulation * Black and White Painted * EUS * Bare Orange Insulation * Black and White Painted * EUS Decoupler * Bare Orange Insulation * Black and White Painted * External Tank Liquid Fuel Tank * Bare Orange Insulation * STS-1 White * Jupiter (DIRECT) Liquid Fuel Tank with Engine Mount (Mesh) * External Tank Oxidizer Tank * Bare Orange Insulation * STS-1 White * Jupiter (DIRECT) Oxidizer Tank (Mesh) * Shuttle Orbiter Radial Decoupler * Bare Orange Insulation * STS-1 White * Orion Pod * Mirrored * White * EFT-1 Black * Orion CM Cap * Mirrored * White * EFT-1 Black * ICPS * ICPS (Mesh) * DCSS 5m (Mesh) * SLS 5m Fairing Base * Orion attach nodes to accommodate the Altair Lander * Orion attach nodes for no/small payloads * Orion attach nodes for tall payloads * Jupiter (DIRECT) Upper Stage Tank * Earth Departure Stage Tank * Jupiter Upper Stage Engine Mount (6x symmetry) * Earth Departure Stage Engine Mount (1 engine & 2 engine variants, uses ModulePartVariant) * Earth Departure/Jupiter Upper Stage interstage decoupler * Altair Ascent Stage (w/integrated RCS and ascent engine) * Altair Decoupler (w/airlock for crew EVA) * Altair Descent Stage (w/integrated engines) * Altair RCS Quad (rcs quads for the descent stage) * Altair Landing Legs (must set to "Gears" Action Group to use the "g" hotkey) * SRB Aft Separation Motor (mounts on aft skirt of 4-segment, 5-segment, and Black Paladin SRBs * 4m Delta Cryogenic Second Stage * 5m Delta Cryogenic Second Stage (ICPS without the Orion adaptor) * Delta IV Medium decoupler * RL10A * Shuttle Orbiter radial decoupler * 4-segment/5-segment SRB radial decoupler * External Tank Oxidizer tank * External Tank Liquid Fuel tank * Ares I Payload Fairing Base Updates: (Nearly Complete Overhaul) * Orion Launch Abort System was separated into two (2) separate parts, the Abort Motor, and the Jettison Motor. * Orion Pod: Remodeled to add detail. * Orion CM Cap: Remodeled to add detail. * Orion Heatshield: Updated model, given mirrored finish * Orion Chutes: Made into single chute part that is attached to the Orion Pod directly. * Orion CM Decopuler: Remodeled. * Orion Service Module: Remodeled to add detail. All RCS pods have been integrated with the SM, and attach nodes added for easier attachment of solar panels. * Orion Solar Panels: Added attach node for easier attachment to SM * Orion SM Decoupler: Remodeled to add detail. * Orion SM Fairing: Remodeled to add detail and improve staging of the petals. * ICPS: Remodeled, 5m DCSS is a variant of this part, added flag decals * ICPS Decoupler: Remodeled to add detail. * SLS Core Stage: Remodeled to add detail. Integrated the SLS Engine Mount. * Exploration Upper Stage: Remodeled to add detail. * Exploration Upper Stage Decoupler: Remodeled to add detail. * 4-Segment, 5-Segment, and Dark Knight SRBs: Remodeled to add detail. * SRB Nose Cone: Remodeled to add detail. * Pyrios Nose Cone: Remodeled to add detail. * Delta IV CBC: Remodeled to add detail. * RS-68: Remodeled to add detail. * GEM-60: Remodeled to add detail, and a gimbal-able nozzle. * RS-25: Remodeled to add detail. * RL10B: Remodeled to add detail, and add an extendable nozzle. * RL10C: Remodeled to add detail. * F-1B: Remodeled to add detail. * J-2X: Remodeled to add detail. * Pyrios booster: Remodeled to add detail. * Ares I Upper Stage: Remodeled to add detail. * Ares I Adapter: Remodeled to add detail, added integrated separation motors. * 2.5m and 3.75m to Orion Adapters: Remodeled to add detail. * SLS Fairing Base: Remodeled to add detail. Added integrated decouplers, 1 for attaching payloads that is not activated by staging, and another for the Orion that is activated by staging the fairing. Added attach nodes for the Orion SM Fairing. * Delta IV Payload Fairing: Remodeled to add detail. Added a payload fairing for the 4m DCSS. NOTE: The 1.25m base of the PMA is a docking port, you do not need to attach a CBM to dock the PMA to other CBMs Download on SpaceDock: Also available through CKAN (or so I'm led to believe) A review of the mod by @jd9921 (Gemini10 Gamers on YouTube) Osiris Capsule showing off the mirrored finish Amun-Ra (SLS) Block I Amun-Ra Block IB Amun-Ra Block II Bastet IV Heavy flying EFT-1 Bastet IV Medium Amunet Space Shuttle Parts Hathor (Jupiter DIRECT)-130 Hathor-246 MOARdV Avionics Systems IVAs for Osiris and Horus Recommended Mods Bacon Labs Stockalike Ariane and More (Dead link) - I provided the Ariane and Vega launchers for this pack, and it uses a modified version of the Shuttle SRBs from this mod Tantares Stockalike Soyuz and Mir - a great mod by Beale adding Soviet/Russian spacecraft and launchers Bluedog Design Bureau - Stockalike Saturn, Apollo, & More - Awesome stockalike historic American spacecraft and launchers License: ShadowWorks is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License