Jump to content

1.0.2 Stock hybrid plane - starting parts


Recommended Posts

For the last two days I spend numerous hours and designs pursuing the quest for a stable plane, made out only of the parts you unlock with aerodynamics. Found plenty of designs that use later parts, but virtually none that use the early ones. There is one caveat however, you need the LV-909 Terrier rocket engine.

Capabilities:

1. Fly to above 17km to grab those survey missions.

2. Relatively stable in flight.

3. Low take off speed.

4. Science Junior and Goo canister - excellent for biome exploration on Kerbin.

5. Adaptability to mission requirements - it has 4 intakes, 2 can be removed and extra goo canisters added, or even a science junior. Also fuel can be altered if you go for a altitude mission or just cruising for biomes.

Problems:

1. Using yaw controls flips the plane in a weird barrel roll. With all my sincere efforts I couldn't solve it, steer the plane with pitch and roll controls, which is actually quite easy. Small yaw increments are not that bad, but they have a certain jerkiness to them.

2. Sometimes, if using less than full throttle and NO SAS, plane would turn on the runway. I ended up replacing the wheels and move them further out(rear ones), makes it very stable during landings.

3. Its a hybrid, because well, normal jets flame out around 12-14km so you need a rocket engine to reach above 17 km. It uses the LV-909, small, light rocket engine.

Feel free to use and tinker with it, my knowledge on building planes is fairly limited, I'd be very happy to learn how to improve on design's flight characteristics. Kept the center of lift behind the center of mass and at a slight angle towards the back, that way the plane has a natural tendency to climb.

screenshot0_zpsionnuc2t.png

screenshot1_zpszhy3bgfs.png

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...