Search the Community

RJ Willys Jeep Download here:https://kerbalx.com/KAS/RJ-Willys-Jeep

Easy Challenge: Build an offroader and Fly/drive to the mountains west of the ksc. Find a way to drive up them and plant a flag at the top. YOU MUST USE EXTERNAL COMMAND SEATS Point System: Fly the offroader to the mountains = 20 points Drive the Offroader to the mountains = 50 points Drive up the mountains without jets to assist with the climb = 30 points Drive up the mountains with jets to assist with the climb = 15 points Make the offroader look like an Offroader = 20 points Use Command Seats Without a rollcage = 35 points Use Command Seats With a rollcage = 25 Points Use Mechjeb Rover AutoPilot = -10 points

The Camelback Bridge There are so many things I've been wanting to get done in KSP and a Camelback Bridge is one of them. These type bridges are so fascinating, the engineering involved is so amazing it often baffles me. I have always admired the structural strength and designs of bridges and the feature that seems to impress me most is their impressive look. For those interested I found a book titled "How To Read Bridges" A crash course in engineering and architecture at the local book store, if you like bridges you will like this book, keep in mind it's a small paperback book but full of good information. This project I have to say has been the most trying of all, let me just say I've gone many rounds with the Kraken on this one. I started this Bridge with only a small section and it was planned to be just a show piece and had no intentions of it growing so big. Then the idea came to me about putting it over water. I built a Bridge Construction Set before and thought maybe I could bridge a gap somewhere on Kerbin. One thing lead to another and I found myself needing other craft to make this happen (in this case did not happen). I was hoping this would have been a more majestic looking bridge over water crossing to a small island but the Kraken would not allow that! I do plan to give it another try in the future and with a much stronger structure. I wanted to give everyone a view of this 423.3 meter bridge that took literally months to build and over 200 hours of building testing even with the Kraken destroying and even once ate my entire bridge leaving zero crumbs on the water, but I did manage to take a ride to it's unconnected end for your viewing. Lets just say Bridges are not recommended in a KSP yet...if ever....not sure what Squad will have for the future of this spectacular game. Bridges are lots of fun but not withstanding the physics of the game as of now. Special Note: It is not recommended to build Bridges in KSP, I do this because I enjoy building stuff in KSP if it works or don't work it's all fun for me. The Mobile Bridge is not going to work when setting it over the Pool, the Bridge was modified for the Video. Also Bridges that are constructed will require a low profile vehicle, the Convertible Jeep only works with the Mobile Bridge Unit. If you use it on a constructed Bridge do not use a Kerbal, cross the Bridge by Remote Control as seen in the Video. Connecting more than a totally of 7 sections including the Entrance and Exit is not recommended. After all testing the Bridge works best if constructed on land. Other links of information during the Project Convertible Jeep Parts: 81 Mass: 3.572t Height: 2.1m Width: 2.6m Length: 5.7m Craft File: Convertible Jeep Bridge Center Section Parts: 283 Mass: 59.673t Height: 8.3m Width: 9.4m Length: 31.9m Craft File: Bridge Center Section Bridge Exit Parts: 329 Mass: 69.631t Height: 8.5m Width: 9.4m Length: 47.7m Craft File: Bridge Exit Bridge Entrance Parts: 333 Mass: 69.733t Height: 8.4m Width: 9.4m Length: 46.1m Craft File: Bridge Entrance Mobile Bridge Parts: 377 Mass: 95.059t Height: 12.9m Width: 11.1m Length: 61.2m Craft File: Mobile Bridge

Safari Jeep Set When traveling down the road one day I saw a Jeep pulling a Utility Trailer and thought it looked really cool, with KSP on the brain once again I got to work on the Trailer. I already had a Jeep built and I didn't want to only add a Trailer Hitch so I decided to upgrade it to this Safari Jeep. I am using Air brakes for the Trailer Door and Kelus-LV Mobility Bay Enhancers for Captain Seats in the Jeep, I think Kerbals should always be riding first class. Top Speeds when pulling the Trailer are not too impressive, the Trailer wants to fishtail, but hey we are looking good at cruising speeds. You may want to tweak it but I'm ok with it as is. I would also like to add another shout out thanks to @Majorjim! and his Tiny Hinge, it makes a great Trailer Hitch! Safari Jeep Craft File: Safari Jeep Parts: 129 Mass: 3.250t Height: 2.4m Width: 4.7m Length: 2.6m Action Groups 1- Toggle Lights 2- Toggle Lights 3- Antennas Jeep Trailer Craft File: Jeep Trailer Parts: 41 Mass: 2.115t Height: 1.8m Width: 5.6m Length: 3.4m Action Groups 1- Toggle Gear Jeep Utility Trailer Craft File: Jeep Utility Trailer Parts: 54 Mass: 3.011t Height: 3.6m Width: 6.5m Length: 3.6m Action Groups 1- Toggle Gear 2- Toggle Light

DK Salvage is proud to present RoveMate Classic DOWNLOAD LINK https://www.dropbox.com/s/6yqmkoqynt620xx/RoveMateClassic1.0.zip?dl=0 DESCRIPTION The RoveMate Classic. It's manufacturer abandoned the design decades ago for lighter designs that worked in vacuum. But we at DK Salvage have uncovered a small trove of these rusting beauties, and will be restoring them for atmospheric use. Includes an old Diesel motor that we modified to run on Kerosene (liquid fuel/intake air) and a KIS/KAS storage compartment. LICENSE included in the download, WTFPL. SUPPORT & UPDATES Not in the traditional sense. I'm uploading this to share, as I'll be fielding the part in an upcoming race on these forums. I figured it would be sporting to allow others a to have one for themselves. I may roll out more features or textures in the future. For now, I've left very detailed notes in the config, and the necessary tools for you to re-texture it easily. I will retain the raw models for personal use, but the license is quite permissive. PM me here if you want a copy of it in .blend or .dae, and I will consider it. Or just reverse engineer using available tools.

Jeep R7 While working on the WSH-500 Wingship I wanted to use a vehicle to bring the Kerbals to the new craft as I've done in previous videos and I decided to use a Jeep that I made a while back. After reviewing it I decided to build another Jeep. This one is much like the original but without a Mun Launcher. Craft File: Jeep R7 Parts: 72 Mass: 2.352t Height: 3.0m Width: 3.1m Length: 4.3m Craft File with Can Attachment: Jeep R7 WCA I've supplied 4 MK1 Lander Cans for those who are not using mods.