Angelo Kerman Posted April 22, 2017 Author Share Posted April 22, 2017 2 hours ago, Space Kadet said: would it be possible to get the craft file for this plane, mine is so unbalanced i wanna pull your apart and see how you made it Yup, already slated for the next release. Hopefully in the next couple of days. Quote Link to comment Share on other sites More sharing options...
budda Posted April 23, 2017 Share Posted April 23, 2017 cool that answers my question Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted April 23, 2017 Author Share Posted April 23, 2017 Buffalo 2.0.5 is now available: - WBT Update - Added the V-22 Buffalo Wings development aircraft to the SampleCraft/Ships/SPH folder. It is fairly well balanced for VTOL flight if you use the Hover Manager. Quote Link to comment Share on other sites More sharing options...
Gumby1973 Posted April 24, 2017 Share Posted April 24, 2017 Had to change the settings on the rotors so they rotated up when using the control. Also, added some compressed air rcs thrusters to help with stability. Added a probe core to control it. Flew to the abandoned airfield and back and landed on the VAB for the first time, just missed the helipad and promptly lost my probe core, but I shut down the throttle before losing it, so I just kind of sat there on top of the VAB. Successful test flight of V-22, will try putting a SAFER on it next. I'm planning on sending one of these, a Kestrel, and a Pathfinder base with my Alexei Leonov DSEV, and all my Kerbals will meet up on the surface of Duna and have a party! Leonov is under construction in Kerbin orbit. Quote Link to comment Share on other sites More sharing options...
Gumby1973 Posted April 24, 2017 Share Posted April 24, 2017 Landed the VN-22 on the Helipad. Learned how to use those Compressed Air Thrusters in Docking mode makes it super easy. This is a great addition to the game. Thanks Angel-125 for all your hard work! Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted April 24, 2017 Author Share Posted April 24, 2017 Glad it's working for you. Quote Link to comment Share on other sites More sharing options...
www2 Posted April 25, 2017 Share Posted April 25, 2017 Can you tell when i can expect rotation joint similar done as in Feline Utility Rovers? Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted April 26, 2017 Author Share Posted April 26, 2017 19 hours ago, www2 said: Can you tell when i can expect rotation joint similar done as in Feline Utility Rovers? Eventually. Quote Link to comment Share on other sites More sharing options...
smotheredrun Posted April 27, 2017 Share Posted April 27, 2017 9 hours ago, Angel-125 said: Eventually. Haha, you should add a TM next to Eventually. Fun story, was goofing around with the Buff and Heisenberg the other day... I can't build airships (yet), but these are some cool things man. It's been since 1.0.4 or 5 since I used Buffalo. Big improvement to a system that already worked well. Thanks. I like that I don't need to strap a 2.5m teetering Science Lab to the flat deck anymore. Bob kept crashing my prototype science rovers anytime he took a grade steeper than 2 %. (He got his licence from a box of Kerb-PopsTM). Quote Link to comment Share on other sites More sharing options...
Flying Geologist Posted April 28, 2017 Share Posted April 28, 2017 Long time lurker for this mod (among others), but I felt that I had to share this image. View post on imgur.com Mind you, it's not a testament to my pilot abilities, but rather one to how easy you make it to work with all of these different parts. Appreciate all of your hard work Angel-125! Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted April 28, 2017 Author Share Posted April 28, 2017 17 minutes ago, Flying Geologist said: Long time lurker for this mod (among others), but I felt that I had to share this image. View post on imgur.com Mind you, it's not a testament to my pilot abilities, but rather one to how easy you make it to work with all of these different parts. Appreciate all of your hard work Angel-125! Nicely done! Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted April 30, 2017 Author Share Posted April 30, 2017 Buffalo 2.0.6 is now available: - Minor update to consolidate RPM/ASET ModuleManager patches into one file. - VTOL Manager has improved hover management during low framerate conditions. - Fix for IVA screens not remembering what image they were displaying. Quote Link to comment Share on other sites More sharing options...
StarkRG Posted May 5, 2017 Share Posted May 5, 2017 Whenever I try to launch a vessel using the Buffalo command pod KSP crashes to desktop. The only thing I can see in the logs that might be causing this is a note at the top of the Player.log: The following assembly referenced from /home/starkrg/Kerbal Space Program/GameData/WildBlueIndustries/Buffalo/Plugins/Buffalo.dll could not be loaded: Assembly: KerbalActuators (assemblyref_index=1) Version: 1.0.0.0 Public Key: (none) The assembly was not found in the Global Assembly Cache, a path listed in the MONO_PATH environment variable, or in the location of the executing assembly (/home/starkrg/Kerbal Space Program/GameData/WildBlueIndustries/Buffalo/Plugins/). Could not load file or assembly 'KerbalActuators, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. I've completely removed both KerbalActuators and Buffalo, and replaced them with clean copies from the zip and the problem still occurs. Here are the raw logs:KSP.logPlayer.log Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted May 5, 2017 Author Share Posted May 5, 2017 4 hours ago, StarkRG said: Whenever I try to launch a vessel using the Buffalo command pod KSP crashes to desktop. The only thing I can see in the logs that might be causing this is a note at the top of the Player.log: The following assembly referenced from /home/starkrg/Kerbal Space Program/GameData/WildBlueIndustries/Buffalo/Plugins/Buffalo.dll could not be loaded: Assembly: KerbalActuators (assemblyref_index=1) Version: 1.0.0.0 Public Key: (none) The assembly was not found in the Global Assembly Cache, a path listed in the MONO_PATH environment variable, or in the location of the executing assembly (/home/starkrg/Kerbal Space Program/GameData/WildBlueIndustries/Buffalo/Plugins/). Could not load file or assembly 'KerbalActuators, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. I've completely removed both KerbalActuators and Buffalo, and replaced them with clean copies from the zip and the problem still occurs. Here are the raw logs:KSP.logPlayer.log Are you using Buffalo 2.0.6? Are you using KSP 1.2.9? None of my mods are compiled for KSP 1.2.9. Quote Link to comment Share on other sites More sharing options...
smotheredrun Posted May 5, 2017 Share Posted May 5, 2017 Uh oh! Let's not start asking 1.2.9 questions here.... I'm pretty sure almost 0 mods are compatible with it Quote Link to comment Share on other sites More sharing options...
StarkRG Posted May 5, 2017 Share Posted May 5, 2017 5 hours ago, Angel-125 said: Are you using Buffalo 2.0.6? Are you using KSP 1.2.9? None of my mods are compiled for KSP 1.2.9. I'm using KSP 1.2.2, I didn't even know there was a 1.2.9 And, yes, that's the version of Buffalo I'm using. Quote Link to comment Share on other sites More sharing options...
StarkRG Posted May 6, 2017 Share Posted May 6, 2017 The problem also occurs with the bison pods, but not the crewless probe. Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted May 6, 2017 Author Share Posted May 6, 2017 1 hour ago, StarkRG said: The problem also occurs with the bison pods, but not the crewless probe. Your logs seem to indicate that you don't have KerbalActuators installed. Be sure to install it into theWildBlueIndustries folder. You can check your logs, KerbalActuators would appear in the list. Quote Link to comment Share on other sites More sharing options...
StarkRG Posted May 6, 2017 Share Posted May 6, 2017 (edited) 9 minutes ago, Angel-125 said: Your logs seem to indicate that you don't have KerbalActuators installed. Be sure to install it into theWildBlueIndustries folder. You can check your logs, KerbalActuators would appear in the list. It's definitely there. Proof. Is it possible it's somehow compiled for windows only? As I'm using Linux that would explain a lot... Edited May 6, 2017 by StarkRG Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted May 6, 2017 Author Share Posted May 6, 2017 7 hours ago, StarkRG said: It's definitely there. Proof. Is it possible it's somehow compiled for windows only? As I'm using Linux that would explain a lot... That could very well be it. All my plugins are compiled for Windows. Quote Link to comment Share on other sites More sharing options...
StarkRG Posted May 6, 2017 Share Posted May 6, 2017 Almost every other mod works cross platform (there's only been three that I know of that had separate Linux and Mac versions and they were pretty low level stuff like memory management), and I used to be able to use Buffalo just fine, so I don't know what's changed. It's only KerbalActuators that's apparently failing to load, are you using some windows-specific code? Would you suggest I just go back to one of the previous versions that worked? Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted May 7, 2017 Author Share Posted May 7, 2017 9 hours ago, StarkRG said: Almost every other mod works cross platform (there's only been three that I know of that had separate Linux and Mac versions and they were pretty low level stuff like memory management), and I used to be able to use Buffalo just fine, so I don't know what's changed. It's only KerbalActuators that's apparently failing to load, are you using some windows-specific code? Would you suggest I just go back to one of the previous versions that worked? TBH I don't know what to do at this point. I think you should install a previous version until you get one that doesn't crash. I know everything is working on Windows, I used it today. Quote Link to comment Share on other sites More sharing options...
Guest Posted May 7, 2017 Share Posted May 7, 2017 Hello! I have the same problem that @StarkRG This is what I see in my log: Quote Non platform assembly: C:\Program Files (x86)\Steam\steamapps\common\Kerbal Space Program\GameData\WildBlueIndustries\Buffalo\MiniAVC.dll (this message is harmless) Non platform assembly: C:\Program Files (x86)\Steam\steamapps\common\Kerbal Space Program\GameData\WildBlueIndustries\Buffalo\Plugins\Buffalo.dll (this message is harmless) ADDON BINDER: Cannot resolve assembly: KerbalActuators, Culture=neutral, PublicKeyToken=null (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ADDON BINDER: Cannot resolve assembly: KerbalActuators, Culture=neutral, PublicKeyToken=null (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) AssemblyLoader: Exception loading 'Buffalo': System.Reflection.ReflectionTypeLoadException: The classes in the module cannot be loaded. at (wrapper managed-to-native) System.Reflection.Assembly:GetTypes (bool) at System.Reflection.Assembly.GetTypes () [0x00000] in <filename unknown>:0 at AssemblyLoader.LoadAssemblies () [0x00000] in <filename unknown>:0 Additional information about this exception: System.TypeLoadException: Could not load type 'WildBlueIndustries.JetWing' from assembly 'Buffalo, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. System.TypeLoadException: Could not load type 'WildBlueIndustries.WBIMultiEngineHover' from assembly 'Buffalo, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Non platform assembly: C:\Program Files (x86)\Steam\steamapps\common\Kerbal Space Program\GameData\WildBlueIndustries\DSEV\MiniAVC.dll (this message is harmless) Non platform assembly: C:\Program Files (x86)\Steam\steamapps\common\Kerbal Space Program\GameData\WildBlueIndustries\DSEV\Plugins\DSEVUtils.dll (this message is harmless) and my System: [LOG 09:05:47.472] ******* Log Initiated for Kerbal Space Program - 1.2.2.1622 (WindowsPlayer x64) ******* Kerbal Space Program - 1.2.2.1622 (WindowsPlayer x64) OS: Windows 10 (10.0.0) 64bit CPU: Intel(R) Core(TM) i7-4820K CPU @ 3.70GHz (8) RAM: 65456 GPU: NVIDIA GeForce GTX 970 (4058MB) SM: 30 (Direct3D 9.0c [nvd3dumx.dll 21.21.13.7653]) RT Formats: ARGB32, Depth, ARGBHalf, Shadowmap, RGB565, Default, ARGB2101010, DefaultHDR, ARGBFloat, RGFloat, RGHalf, RFloat, RHalf, R8 Log started: Sun, May 07, 2017 09:05:47 Hope this helps. Quote Link to comment Share on other sites More sharing options...
Angelo Kerman Posted May 7, 2017 Author Share Posted May 7, 2017 Buffalo 2.0.7 is now available: - Made it easier to climb into the roof of the crewed parts. - Recompiled Kerbal Actuators. Quote Link to comment Share on other sites More sharing options...
Abstract_Kerman Posted May 8, 2017 Share Posted May 8, 2017 (edited) im having some trouble with the jet wing no matter what u do it always spins uncontrollably,i even tried lining up the COM with the COT and it flips out, i think the issue is atmospheric is there anything i can do. Does FAR help? Edited May 8, 2017 by Abstract223 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.