Jump to content

Make a Soyuz rocket. (Capsule and launcher) Mods allowed.


Recommended Posts

  On 8/5/2016 at 8:29 PM, Andiron said:

It doesn't look like it's modded, he made it with steel beams (because jet fuel can't melt steel beams)

Expand  

Oh please don't start the "Jet fuel can't melt steel beams" argument. Because it can melt steel beams and this is not a thread for starting arguments. Also, rockets do NOT use jet fuel, they use Nitrogen tetroxide combined with hydrazine, OR liquid hydrogen combined with oxidizer, or kerosene along with oxidizer. Nitrogen tetroxide can also be used with Unsymmetrical dimethylhydrazine as rocket fuel. Jet fuel is not kerosene anymore. (Sorry for ranting)

Link to comment
Share on other sites

  On 8/5/2016 at 8:19 PM, InfiniteAtom said:

ATTENTION: AM I MISSING ANYONE'S MODDED SUBMISSION OR SUBMISSION? DID I MISS ANY? IF SO PLZ TELL ME.

Expand  

Mine I guess. Mind if I launch same rocket again and take the missing "after landing" shot preferably on solid ground?

  On 8/5/2016 at 8:38 PM, InfiniteAtom said:

..rockets do NOT use jet fuel, ... they use kerosene along with oxidizer.

Expand  

Isn't kerosene pretty much jet fuel?

Link to comment
Share on other sites

  On 8/5/2016 at 8:38 PM, InfiniteAtom said:

Oh please don't start the "Jet fuel can't melt steel beams" argument. Because it can melt steel beams and this is not a thread for starting arguments. Also, rockets do NOT use jet fuel, they use Nitrogen tetroxide combined with hydrazine, OR liquid hydrogen combined with oxidizer, or kerosene along with oxidizer. Nitrogen tetroxide can also be used with Unsymmetrical dimethylhydrazine as rocket fuel. Jet fuel is not kerosene anymore. (Sorry for ranting)

Expand  

Chillout, it's just a joke ! And my rocket is a kerolox one

Link to comment
Share on other sites

  On 8/5/2016 at 8:39 PM, ImmaStegosaurus! said:

Mine I guess. Mind if I launch same rocket again and take the missing "after landing" shot preferably on solid ground?

Expand  

ATTENTION: AM I MISSING ANYONE'S MODDED SUBMISSION OR SUBMISSION? DID I MISS ANY? IF SO PLZ TELL ME.

Oh I did not realize that you forgot to post that picture, but yes go ahead and relaunch it, a ocean landing or one on land is fine.

  On 8/5/2016 at 8:42 PM, Andiron said:

Chillout, it's just a joke ! And my rocket is a kerolox one

Expand  

I said sorry for ranting.

Link to comment
Share on other sites

  On 8/5/2016 at 8:39 PM, ImmaStegosaurus! said:

Isn't kerosene pretty much jet fuel?

Expand  

It's far better, RP-1 is a very refined kerosen to prevent carbonization inside the rocket engine because of the huge heat.

  On 8/5/2016 at 8:45 PM, InfiniteAtom said:

I said sorry for ranting.

Expand  

Didn't mean to upset you, so i'm sorry

Link to comment
Share on other sites

  On 8/5/2016 at 8:19 PM, InfiniteAtom said:

Is this modded? If no, how did you do the gantry arms?

Expand  

No, this is all stock. Basically, the gantry arms are attached to a stack decoupler and I attached an ore tank to the bottom as a counterweight. I hid this with those wing connectors which help keep the arm falling all the way back.

I'm not sure if that is clear or not, this might help:

aPZAHF3.png

Removed the wing connectors to demonstrate.

joVVL7I.png

Stage the decoupler and gravity does the rest.

  On 8/5/2016 at 8:19 PM, InfiniteAtom said:

Pictures of landing or splashdown for proof?

Expand  

The image requirements didn't say anything about that, they did say that I could put them in as a bonus, though. Anyways, here:

Re-entry

kNubFl3.png

Just about to re-enter, going 2.2 km/s

Drogue Chute Deployment

ozyQ4UO.png

Main Parachutes

Nv301sw.png

The drogue is cut and the main chutes are deployed.

Heat Shield Jettison

YuUAZB9.png

The heat shield is ditched to lighten the spacecraft.

Retro Rockets 

EKGkgXE.png

Retro rockets are ignited to slow the spacecraft down to 3 m/s before splashdown.

Splashdown

NW36HKp.png

 

Link to comment
Share on other sites

Stock Soyuz entry, I hope you don't mind me using a launch site other than the KSC but the Kosmodrome is just so fitting.

For Mother Krussia

http://imgur.com/a/CmP5Q

Only mod installed that is used is Kerbal Engineer Redux for information no parts affected, BDArmory not used on this craft nor is vessel mover, only have that for moving an aircraft carrier to the ocean and ASDSs

 

Also, @sgt_flyer that Soyuz is just absolutely beautiful for a stock replica.

Edited by Fraus
Link to comment
Share on other sites

  On 8/5/2016 at 8:53 PM, Andiron said:

It's far better, RP-1 is a very refined kerosen to prevent carbonization inside the rocket engine because of the huge heat.

Didn't mean to upset you, so i'm sorry

Expand  

You did not upset me. You are fine. I just felt compelled to get scienc-ey about it.

  On 8/7/2016 at 12:11 AM, MedwedianPresident said:

Add a bonus for actually transporting the rocket to the launchpad by train. Please.

Expand  

Bonus added.

Link to comment
Share on other sites

  On 8/6/2016 at 1:54 AM, Fraus said:

Stock Soyuz entry, I hope you don't mind me using a launch site other than the KSC but the Kosmodrome is just so fitting.

For Mother Krussia

http://imgur.com/a/CmP5Q

Only mod installed that is used is Kerbal Engineer Redux for information no parts affected, BDArmory not used on this craft nor is vessel mover, only have that for moving an aircraft carrier to the ocean and ASDSs

 

Also, @sgt_flyer that Soyuz is just absolutely beautiful for a stock replica.

Expand  

I need more images to enter this into the contest.

Link to comment
Share on other sites

  On 8/7/2016 at 2:12 AM, Fraus said:

I apologize then, if you could just tell me which ones I will get to it in the morning.

Expand  

You do NOT need to apologize, also I liked your "Mother Krussia" joke. Here:

You must provide images of your rocket in the following places/situations:

       8a. On the launchpad.

       8b. a few hundred meters off the launchpad (Void if replica is a mini Soyuz and cannot fly.)

       8c.Right after the first stage boosters have separated. (Void if replica is a mini Soyuz and cannot fly.)

       8d. In orbit with map view open showing trajectory. (Void if replica is a mini Soyuz and cannot fly.)

       8e. Landed after re-entry. (NO CHEATING!) (This means splashed down or on land, or reasonable slow enough to imply that it survived the landing)

  8.1: OPTIONAL images of your creation:

      8.1a. With parachute deployed

      8.1b. With crew next to the rocket.

8.2: Bonus points!!

     If you use similar engines on your rocket to what is actually used (looks wise) then you get bonus points!! (Provide a image from the vehicle designer in the VAB)

     If you transport the rocket to the launchpad by train you get bonus points. This however, will require a picture for proof and I hope you have a means of lifting the rocket up vertically. A video would be desired but you are not required to use a video.

9. Any other images are allowed but please make it clear that they are extra images

Link to comment
Share on other sites

So I am assuming the only one I am missing is 8D then right? Or do you want me to deorbit my second one as well? Only asking because I am being cheeky and using this as an excuse to send crew to my station. Also after looking at some of these designs I may start to remake some designs specifically the orbital module..

http://imgur.com/a/kf6vX

I will also link a download to my craft file when I am done working on it.

Edited by Fraus
Forgot something, silly me.
Link to comment
Share on other sites

  On 8/7/2016 at 11:03 PM, Fraus said:

So I am assuming the only one I am missing is 8D then right? Or do you want me to deorbit my second one as well? Only asking because I am being cheeky and using this as an excuse to send crew to my station. Also after looking at some of these designs I may start to remake some designs specifically the orbital module..

http://imgur.com/a/kf6vX

I will also link a download to my craft file when I am done working on it.

Expand  

Please deorbit and provide photos. I know this is strenous requirements, but I have to hold people to the same standards. :(

Link to comment
Share on other sites

  • 2 weeks later...
  On 8/6/2016 at 1:54 AM, Fraus said:

Stock Soyuz entry, I hope you don't mind me using a launch site other than the KSC but the Kosmodrome is just so fitting.

For Mother Krussia

http://imgur.com/a/CmP5Q

Only mod installed that is used is Kerbal Engineer Redux for information no parts affected, BDArmory not used on this craft nor is vessel mover, only have that for moving an aircraft carrier to the ocean and ASDSs

 

Also, @sgt_flyer that Soyuz is just absolutely beautiful for a stock replica.

Expand  

Yes you may use other launch sites such as the Kosmodrome.

Link to comment
Share on other sites

Hi This is my contribuion for THE SOYOUZ CHALLENGE

NO MODS ONLY STOCK PARTS, as the rules say! And a video of a complete flight (liftoff, all stages, docking to the station, reentry and landing )

Rocket Made By broxmob from the forum of the french site jeuxvideo.com ( http://www.jeuxvideo.com/profil/bronxmob?mode=page_perso )

And Video made by me !

Hope it will please you! Enjoy !

 

Edited by iceolator88
forgot a sentence :)
Link to comment
Share on other sites

  • 3 weeks later...

Me be back.

My previous design couldn't orbit due to abyssimal TWR, but I used 1.2 and the T30 buff to get it to finally fly! (Only to realise it is way too wobbly to go anywhere but straight up)

Album here: http://imgur.com/a/tQGlw

  Reveal hidden contents

Engine layout (non gimballed engines + verniers) and sizes of all stages are accurate. Mass is still far from being the same as the real one (500t).

Still need to fix the wobbling to make it fly properly, and I will probably change a few more things (especially on Block A).

Link to comment
Share on other sites

  On 8/29/2016 at 3:40 PM, iceolator88 said:

Hi This is my contribuion for THE SOYOUZ CHALLENGE

NO MODS ONLY STOCK PARTS, as the rules say! And a video of a complete flight (liftoff, all stages, docking to the station, reentry and landing )

Rocket Made By broxmob from the forum of the french site jeuxvideo.com ( http://www.jeuxvideo.com/profil/bronxmob?mode=page_perso )

And Video made by me !

Hope it will please you! Enjoy !

 

Expand  

I am very sorry that I did not see this post. EDIT: Excuse me, you used some else s  rocket for the challenge?

  On 9/17/2016 at 2:59 PM, Gaarst said:

Me be back.

My previous design couldn't orbit due to abyssimal TWR, but I used 1.2 and the T30 buff to get it to finally fly! (Only to realise it is way too wobbly to go anywhere but straight up)

Album here: http://imgur.com/a/tQGlw

  Reveal hidden contents

Engine layout (non gimballed engines + verniers) and sizes of all stages are accurate. Mass is still far from being the same as the real one (500t).

Still need to fix the wobbling to make it fly properly, and I will probably change a few more things (especially on Block A).

Expand  

Alright. I will put you down as pending.

  On 8/29/2016 at 3:40 PM, iceolator88 said:

Hi This is my contribuion for THE SOYOUZ CHALLENGE

NO MODS ONLY STOCK PARTS, as the rules say! And a video of a complete flight (liftoff, all stages, docking to the station, reentry and landing )

Rocket Made By broxmob from the forum of the french site jeuxvideo.com ( http://www.jeuxvideo.com/profil/bronxmob?mode=page_perso )

And Video made by me !

Hope it will please you! Enjoy !

 

Expand  

This doesn't necessary mean I will deny this, but I have to think about it.

Edited by InfiniteAtom
Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...