Spaceborne

[Moncasta]

Another great mission. Hopefully one day I can see some rovers  on Minmus

 

 

[SBKerman]

Kerbonaut Group 4

Growing the kerbonaut corps.

Spoiler

       

       

With the UAA planning missions to Minmus and beyond, more kerbonauts are needed. Joining the ranks are pilots Hadlong and Neming, engineers Dudble and Haycas, and scientists Joekin, Aldkin, Eiller, Hudsey, Helus and Luemone.

 

Valiant Test Flight 3

Third test of the Valiant spaceplane.

Date: Y7 D14  Launch site: Dessert  Launch vehicle: Goblin  Crew: - - -

Spoiler

Fitted with an upgraded guidance computer, a Valiant backup article is launched at the Dessert site.

It makes an almost perfect flight and parachute landing.

The success of the third flight puts the project back on track. One more atmospheric test is planned to iron out the last minor bugs before the first orbital flight.

 

Explorer Ground Test 1

Test a new lander prototype.

Date: Y7 D27  Launch site: Dessert  Launch vehicle: - - -  Crew: P1 Valentina, E1 Bill

Spoiler

Following the troubled second Mun landing, UAA has accelerated the development of a more advanced lander. Named Explorer, the new vehicle supports a crew of six and can act as a habitat while on the ground. The first prototype is inspected on day 27 by Val and Bill. Together they indentify a number of design features that need improvement, such as the external ladders, internal hatches and the layout of the internal crew compartment. More test will follow shortly, once the initial concerns have been addressed.

 

Tranquility Module 3

Add an inflatable habitat to the station.

Date: Y7 D41  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

To accommodate larger crews and longer expeditions, Tranquility will be expanded with a set of new habitation modules. The first, Module 3, is launched on day 41. It is unique in that it will be inflated once docked to the station. This makes it light and allows it to be packed tightly so that it can launch on the simplest Phoenix variant.

To make room for the new hardware, Glesy and Newbin undock Spider from the station.

The module can then attach itself to the free docking port.

With the module in place, Spider is redocked to one of the new side ports.

The tug that brought the module to the station has done its job and is disposed of by crashing it into the Mun. All that remains to do now is to inflate the new habitat, but that will have to wait until the material needed for the operation can be delivered by a Keystone vehicle.

 

Intrepid 20

Expedition Harmony 6.

Date: Y7 D73  Launch site: KSC  Launch vehicle: Phoenix 000  Crew: P1 Eilbin, E0 Dudble, S0 Helus

Spoiler

Intrepid 20 launches with the next Harmony expedition; mission commander Eilbin and rookies Dudble and Helus of the fourth kerbonaut group.

The previous crew returns to Kerbin the following day.

 

Intrepid 21

Expedition Tranquility 4.

Date: Y7 D99  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P0 Hadlong, E1 Seewin, S0 Hudsey

Spoiler

In preparation for the upcoming crew rotation, Keystone 5 is deorbited on day 96.

The fourth expedition to Mun station Tranquility lifts off from the space center on day 99. It is a smooth ride from launch all the way to docking.

For the returning crew, things look worse. As they inspect their spacecraft before leaving the station, they find that the service module has been seriously damaged. After a long discussion with mission control, it is decided that a new vehicle will be sent out. The current one is to attempt a return empty. It is a risky move since it temporarily leaves three of the kerbonauts without a way to get back home.

Before closing the hatch, the crew move all available supplies from Intrepid 19 over to the station. They then watch as the spacecraft undocks and disappears into the void. Everyone expects it to fail, but it turns out Intrepid is made of stern stuff. Not only does the damaged service module bring the craft back to Kerbin. It separates cleanly, allowing the command module to reenter the atmosphere and splash down in one piece.

 

Intrepid 22

Send a fresh spacecraft to replace Intrepid 19.

Date: Y7 D127  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: - - -

Spoiler

Intrepid 22 is the vehicle that will bring Glesy, Newbin and Beasen back from Tranquility. The personnel at the space center manage to roll it out to the pad in record time. It lifts off on day 127 atop a Phoenix 043.

The rush to launch does come with consequences. The booster landing fails. However, it is a small price to pay if the rest of the mission is successful.

Intrepid 22 arrives at the station to pick up the returning crew.

Three days after launch, the spacecraft lands back on Kerbin. Expedition Tranquility 3 has officially ended.

 

-- -- -- END OF MISSION LOG 017 -- -- --

Edited November 13, 2020 by SBKerman

[SBKerman]

Keystone 6

Deliver material needed to inflate the new Tranquility habitation module.

Date: Y7 D131  Launch site: KSC  Launch vehicle: Phoenix 343  Crew: - - -

Spoiler

Keystone 6 is launched on day 131. It carries everything required to inflate the recently added hab module.

The spacecraft makes its way to Tranquility.

After Keystone has docked, expedition crewmembers Seewin and Hadlong begin an EVA to prepare the module. They hook up wires and various other connections. They also remove some external components that are no longer needed.

Once the EVA is over, module 3 can be inflated. The operation more than doubles the available living area.

The final task is to relocate Spider from the side docking port to the main one. Fresh from their spacewalk, Seewin and Hadlong enter the lander. They undock and maneuver it to the proper location.

 

Explorer Ground Test 2

Test updated prototype.

Date: Y7 D148  Launch site: Dessert  Launch vehicle: - - -  Crew: P1 Valentina, E1 Bill

Spoiler

Valentina and Bill are back at the Dessert launch site, taking a detailed look at the changes made to Explorer. They test ingress and egress to make sure the improved system of ladders and hatches work properly. After a thorough inspection, the landing craft gets their approval. It can now move on to more advanced tests in space.

 

Tranquility Module 4-1/4-2

Add two more modules to Tranquility.

Date: Y7 D150/153  Launch site: KSC  Launch vehicle: Phoenix 343  Crew: - - -

Spoiler

The two identical modules 4-1 and 4-2 will provide additional working area and life support equipment to the Mun station. Unlike the inflatable module 3, these are of standard rigid construction. The first one is launched on day 150.

It is docked to the port previously occupied by Spider.

The second module launches three days later.

It is docked opposite 4-1.

One of the two tugs used in the delivery of the modules is disposed of. The other will remain attached for the time being, since there are plans to use it later on.

 

Keystone 7

Resupply Tranquility station.

Date: Y7 D170  Launch site: KSC  Launch vehicle: Phoenix 343  Crew: - - -

Spoiler

Keystone 6, having done its job, is sent crashing into the Mun on day 155.

Keystone 7 is launched fifteen days later.

It arrives in munar orbit and proceeds to rendezvous and dock with Tranquility.

 

-- -- -- END OF MISSION LOG 018 -- -- --

Edited November 13, 2020 by SBKerman

[SBKerman]

Echo 3/4

Place two relay satellites in Minmus polar orbit.

Date: Y7 D196/209  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

In preparation for missions to Minmus, two relay satellites are to be placed in eccentric orbits above the moon's poles. Echo 3 is sent up first.

It is successfully deployed in an orbit with its apoapsis high above the north pole.

Echo 4 follows soon after. Its orbit is opposite that of Echo 3.

 

Surveyor 3

Send a mapping satellite to Minmus.

Date: Y7 D224  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

Surveyor 3 is a mapping satellite identical to its predecessors. It is inserted into polar orbit around Minmus from where it will scan the surface and create detailed maps of the terrain.

 

Intrepid 23

Expedition Harmony 7.

Date: Y7 D274  Launch site: KSC  Launch vehicle: Phoenix 000  Crew: P0 Neming, E0 Haycas, S1 Julbal

Spoiler

Expedition 7, under the command of kerbonaut Julbal, arrives at Harmony station shortly after launch.

The previous crew undock Intrepid 20 on day 275. They reenter Kerbin's atmosphere and splash down a day later.

 

Keystone 8

Resupply Harmony station.

Date: Y7 D286  Launch site: KSC  Launch vehicle: Phoenix 322  Crew: - - -

Spoiler

Thanks to its advanced life support system, green houses and large storage areas, Harmony has not needed new supplies since Keystone 1. As reserves are finally starting to run low, Keystone 8 is launched to restock the station.

 

Intrepid M Pad Abort Test

Test abort system on new Intrepid variant.

Date: Y7 D318  Launch site: Dessert  Launch vehicle: - - -  Crew: - - -

Spoiler

Although Dauntless is slated to take over the main part of crew transports, UAA still wants to keep a second, lower cost vehicle for short duration missions to LKO. The plan is for Valiant to take on this role, but until it enters service, a modified version of Intrepid is being developed. It will combine the current command module with a new service module derived from the Spider lander. To keep commonality between vehicles, the new Intrepid M will use the same launch escape system as Dauntless. A successful test is held on day 318 at the Dessert site. Since the system is the same, this also counts toward the certification of the LES for Dauntless.

 

-- -- -- END OF MISSION LOG 019 -- -- --

Edited November 13, 2020 by SBKerman

[SBKerman]

Keystone 9F

Refuel Phoenix booster stuck in orbit.

Date: Y7 D326  Launch site: KSC  Launch vehicle: Phoenix 322  Crew: - - -

Spoiler

When Dauntless 1 was launched last year its Phoenix booster ran out of fuel during the deorbit burn thus stranding it in LKO. In an attempt to bring it back down, the UAA sends up a fuel-carrying Keystone that has been modified to dock with the booster and refuel it.

Keystone 9F rendezvous with the Phoenix. It grabs hold of to the top of the rocket where it can connect to the fuel lines.

After pumping a small amount of fuel and oxidizer into the tanks, Keystone 9F disconnects. It moves out of the way of the booster so that the landing procedure can commence. Keystone itself will remain in orbit in case it is needed again.

It is a nominal landing, with the Phoenix touching down right next to the space center. The event has shown that the booster is capable of spending a year in orbit and still make it safely back to Kerbin. It has also demonstrated the capabilities of the modified Keystone vehicle.

 

Dauntless 2

Orbit Minmus.

Date: Y7 D363  Launch site: KSC  Launch vehicle: Phoenix 024  Crew: P1 Valentina, E1 Bill

Spoiler

Work on Dauntless has been accelerated during the second half of the year. Upper management at UAA want the spacecraft ready for expedition Tranquility 5, but problems have been stacking up. No less than three ground tests have been performed in short order just to address the vibration issue that caused a panel to fall off during launch of Dauntless 1. Other shortcomings have cropped up as well. Even so, a flight with crew is greenlit. It is a controversial decision, but management is confident in the kerbonauts selected for the mission. Pilot Valentina and engineer Bill, fresh off their work on the Explorer lander, will be the first kerbals to fly a Dauntless. They will also be the first to visit Minmus.

Dauntless 2 is brought to orbit by a Phoenix 024. This new variant of the launch vehicle uses two recoverable liquid fuel strap-on boosters in lieu of expendable SRBs. They are powered by the same reliable K1 Kiwi engines found on the main stage. Recovery is supposed to be by parachute, but a malfunction in the deployment mechanism leads to the strap-ons crashing into the ocean after separation. The launch also suffers from a lost panel, same as Dauntless 1, despite the work done to avoid it.

The 024 is slightly less powerful than the 042 (erroneously reported as a 043 in mission log 16) used for Dauntless 1. However, weight reduction of the spacecraft allows the new Phoenix to launch the payload and land successfully, although by a very small margin.

After the eventful launch, Valentina and Bill plot a course for Minmus. The service module engine fires, sending them toward kerbalkind's first close encounter with the small moon.

Two course corrections are required mid-flight. On day 373, a fourth burn of the engine brings Dauntless 2 into Minmus orbit. With that, Val and Bill have made history.

From the window, the crew get a good view of Minmus, Kerbin, the Mun and even the faint glow of Duna.

Unfortunately, there is little time to take in the scenery. After only two days, the voyage home begins.

Dauntless 2 returns to Kerbin on day 381. Reentry is nominal, but the landing is a bit rough. Post-flight analysis shows that much work still remains before the spacecraft can be put in operation. What is most surprising is the physical state of the kerbonauts. Though they are in good spirit, their bodies have taken a toll. This could potentially limit the usefulness of Dauntless with regards to Minmus flights. Further testing is required.

 

-- -- -- END OF MISSION LOG 020 -- -- --

Edited October 6, 2020 by SBKerman

[SBKerman]

Intrepid 24

Expedition Harmony 8.

Date: Y8 D51  Launch site: KSC  Launch vehicle: Phoenix 000  Crew: P1 Sarah, E1 Siglas, S0 Joekin

Spoiler

Intrepid 24 brings the eighth expedition to Harmony station. If all goes as planned, it will be the last standard Intrepid spacecraft to launch.

The previous crew return aboard Intrepid 23, splashing down on day 52.

 

Dauntless 3

Final qualification flight.

Date: Y8 D55  Launch site: KSC  Launch vehicle: Phoenix 024  Crew: - - -

Spoiler

After much tinkering, the engineers are confident that they have ironed out all the major problems in the Dauntless design. Modifications have been made to several systems including parachutes, communication, recovery and electrical power. Only one more test is needed to confirm that everything is working correctly. Dauntless 3 is launched atop a Phoenix 024. Because of a change in the ascent profile, it is unlikely that the rocket will have enough fuel to land again, but that is an acceptable risk for the opportunity to test recovery of the strap-on boosters. With Keystone 9F still in orbit, a stranded Phoenix can be readily dealt with.

The strap-ons are recovered successfully, but as expected, the main stage runs out of fuel. It will remain in space until the Keystone vehicle can reach it.

The reaction control system is given a good run-through before the main mission begins. A burn of the engine sends Dauntless 3 into a highly elliptical orbit to simulate a return from Minmus. As the spacecraft reaches its highest point, the engine is fired again, bringing the periapsis inside Kerbin's atmosphere.

Having fallen back to its home planet, Dauntless 3 jettisons the service module. It burns up while the command module continues the journey, protected by its heat shield.

Drogue and main chutes deploy at the correct moments, allowing the capsule to splash down intact. The flight has demonstrated the viability of the design, and Dauntless is officially brought into service.

 

Dauntless 4

Expedition Tranquility 5.

Date: Y8 D105  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Jeaneane, E1 Burbo, S0 Aldkin, S0 Luemone

Spoiler

Not long after the flight of Dauntless 3, the first operational mission for the new spacecraft is undertaken. It is also the first mission featuring a crew of four. Veteran kerbonaut Jeaneane, who led expedition 1 to Tranquility, is back in the commander's seat. She is joined by engineer Burbo on his second flight. Scientists Aldkin and Luemone, both part of kerbonaut group 4, are the rookies. Together they will remain at the station until the end of the year.

The Phoenix 043 provides enough power to orbit the spacecraft and land itself afterwards.

The transmunar injection, capture, rendezvous with the station and docking are all done with the Dauntless' own engine and RCS, making the whole operation much simpler and easier than with Intrepid. The new arrival takes the place of Keystone 7 which left the station twenty days earlier.

After the crew rotation cermony, Seewin, Hudsey and Hadlong undock Intrepid 21.

They return to Kerbin after having spent 435 days in space. Delays in Dauntless development led to an extension of their mission, which is why they were up there twice as long as originally planned.

 

Keystone 10

Resupply Tranquility station.

Date: Y8 D109  Launch site: KSC  Launch vehicle: Phoenix 343  Crew: - - -

Spoiler

Keystone 10 lifts off from the space center on day 109, bringing supplies to Tranquility. It is the last to launch on a Phoenix 343. Almost as soon as the rocket has left the ground, construction begins on an upgraded launch pad which can support the heavier and more powerful Phoenix 344. It will allow future Keystone vehicles to fly to the Mun fully loaded.

 

-- -- -- END OF MISSION LOG 021 -- -- --

Edited November 13, 2020 by SBKerman

[SBKerman]

Dauntless 5

Fly three tourists to LKO.

Date: Y8 D121  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Eilbin, Tiberry, Froeny, Frosy

Spoiler

It has been almost two years since a tourist last flew in space and applications have been piling up. With Dauntless in service, the floodgates can finally be opened. The first batch of three kerbals are launched aboard Dauntless 5, with pilot Eilbin at the helm.

They spend five days in low Kerbin orbit before returning home.

Dauntless 5 makes a gentle splashdown just off the coast from the space center.

 

Keystone 9F

Refuel Phoenix booster in orbit.

Date: Y8 D148  Launch site: LKO  Launch vehicle: - - -  Crew: - - -

Spoiler

On day 148, Keystone 9F attaches itself to the Phoenix booster left in orbit by Dauntless 3.

After refueling, the launch vehicle performs the reentry burn and lands successfully. It is the first ever night landing of a Phoenix.

 

Intrepid M-1

Fly two tourists to Harmony station. Assist with station upgrade.

Date: Y8 D169  Launch site: KSC  Launch vehicle: Phoenix 000  Crew: P1 Neming, Lebree, Trinard

Spoiler

Intrepid M-1, the first of the new Intrepid variant, is launched on a ten day visit to Harmony station. The objective of the mission is threefold; test the vehicle in flight, bring two tourists to the station, and assist with a planned station upgrade.

The first of these is completed quickly, thanks in large part to the use of already flight tested hardware. The command module is a modified version of the one from the original Intrepid and incorporates upgrades developed for Dauntless and Keystone. The service module is derived from the Spider propulsion unit. With the latter, the problems encountered during the second Mun landing have been identified and fixed in this new design. The service module also contributes the most notable difference compared to the old Intrepid, which is the use of a fuel cell instead of solar panels for generating power.

M-1 docks to Harmony and unloads the two passengers. They will stay in the station's living quarters while the crew works.

 

Harmony Module 7

Add an inflatable habitat to the station.

Date: Y8 D172  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

By this point, Harmony station is almost four years old and while it has excellent life support systems, the cramped living space leaves much to be desired. As the UAA is planning to extend mission durations to two years for the upcoming expeditions, this lack of space must be adressed. The solution is a series of upgrades to the station, the first of which is an inflatable hab module similar to the one at Tranquility.

Some rearranging of modules is required to fit everything in place. Visiting pilot Neming and engineer Siglas of the resident crew use Intrepid M-1 to move module 3 out of the way. This allows the new module 7 to dock to the station.

While returning module 3, Neming and Siglas run into a bit of a predicament. The energy intesive life support system in the module was not turned off correctly, thus draining both its own battery and that of the Intrepid. This leaves the spacecraft and its two occupants drifting away from the station. Quick thinking by the experienced Siglas saves the day. She finds a manual override which not only turns the system off, but also extends the module's solar panels long enough for the batteries to recharge. With power restored, the crew dock module 3 to the upper of two new docking ports provided by module 7.

The following day, Siglas and expedition commander Sarah begin the first of several spacewalks needed to complete the upgrades. The first task is to mount a thermometer to the outside of the station. It was brought up by Intrepid M-1 and is part of the scientific research done on the station.

Next, they move to modules 6-1 and 6-2, where they attach handrails in preparation for later work.

The final stop is at the new module 7. Sarah and Siglas remove thruster blocks and hook up connections so that the hab is set up for inflation once the necessary material is delivered on the next Keystone.

On day 179, Neming and the tourists board Intrepid M-1. They bring with them a bunch of old equipment for disposal. After undocking, the engine is fired for the deorbit burn.

When calculating the burn, no one thought to take into account how much lighter the new command module is compared to the old. As a result, Intrepid M-1 lands right next to the space center instead of in the ocean. It is presented to the public as a precision landing, but in reality it could very well have ended badly.

 

-- -- -- END OF MISSION LOG 022 -- -- --

Edited October 27, 2020 by SBKerman

[SBKerman]

Harmony Module 8

Add new supply container and viewing cupola.

Date: Y8 D203 D228  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

The next addition to space station Harmony is launched on day 203. Module 8 includes storage for supplies and a cupola from which the crew can view Kerbin. It is meant to replace modules 6-1 and 6-2. Unfortunately, it does not reach the station. Shortly after liftoff, the rocket starts to spin out of control. It gets worse and worse until the whole thing breaks apart.

What is left of the launch vehicle and its payload crashes into the ocean. It is the first total failure of a Phoenix rocket. Following an investigation, a control system sensor installed backwards is found to be the culprit.

A second attempt 25 days later succesfully launches the module.

It is docked opposite module 3, and all the station's supplies are moved over to the new storage area.

The next day, Sarah, Siglas and Joekin begin a spacewalk, the first ever with three kerbonauts, to prepare module 6-1 for disposal. The trio first attempt to dismantle the docking adapter on one of the space tugs and move it over to the module, but they are unable to do so.

Instead they disconnect the module and let it drift from the station. When it is far enough away, the space tug catches up with and grabs it. The whole thing can then be deorbited.

The next task is to reconfigure module 3.

Sarah, Siglas and Joekin work through an entire orbit. They dismantle a section of the module, rewire it, and put it back together. The original docking port is moved to module 6-2 and its replacement is taken from the greenhouse where 6-1 was previously attached.

When the work is completed, the second tug undocks from module 8 and redocks to module 3. It will be used in conjunction with Keystone 11 to flip the module around for its final positioning.

 

Keystone 11

Deliver material needed to inflate Harmony module 7. Rearrange and deorbit other modules.

Date: Y8 D254  Launch site: KSC  Launch vehicle: Phoenix 322  Crew: - - -

Spoiler

Keystone 11 is launched on day 254.

After docking with Harmony, its cargo is used to inflate the new habitation module.

After the inflation procedure is over, module 3 undocks. The attached space tug moves it away from the station.

Keystone 11 now undocks from Harmony. It redocks to module 3, on the opposite side of the tug. The complicated dance continues with the tug undocking and deorbiting itself. Finally, Keystone 11 returns module 3 to the station, although upside down relative to its previous orientation.

The last task to perform is the disposal of module 6-2. Keystone 11 removes the now empty storage module from Harmony and brings it into a suborbital trajectory. The combined spacecraft and station module are destroyed as they enter Kerbin's atmosphere. This completes the first phase of the planned upgrades. The next phase will commence once expedition 9 has arrived.

 

-- -- -- END OF MISSION LOG 023 -- -- --

[SBKerman]

Serenity Station Module 1

Launch the core module of a Minmus station.

Date: Y8 D294  Launch site: KSC  Launch vehicle: Phoenix 441  Crew: - - -

Spoiler

The first module of a space station bound for Minmus is launched into low Kerbin orbit by a Phoenix 441. Named Serenity, the station uses the same design as Tranquility with a few upgrades. The most notable of these is a new type of compressable docking port. If it works as intended it will create a permanent connection between the first two modules.

Another feature added to Serenity that Tranquility lacked is a set of small thrusters that can be used to adjust the station's orbit. By firing these thrusters, Serenity is moved from a 98 x 101 km orbit to 146 x 151 km. It will be visited by the crew of Intrepid M-2, who will assemble the truss holding the solar panels, radiators and batteries. A transfer stage will then dock to the station and send it Minmus.

 

Intrepid M-2

Assemble truss segment on Serenity.

Date: Y8 D297  Launch site: KSC  Launch vehicle: Phoenix 000  Crew: P1 Glesy, E1 Bill

Spoiler

Pilot Glesy and engineer Bill ride the second Intrepid M spacecraft to orbit. Their mission is to dock with Serentiy station and assemble the power truss. This is the second time Bill performs this operation; he did the same work on Tranquility three years ago.

The crew arrive at the station and immediately begin the EVA. They move the truss segment to its correct position and secure it in place. Once all connections have been hooked up and the work is done, the kerbonauts retreat back to Intrepid M-2 for some rest.

The remainder of the mission is spent monitoring the systems aboard Serenity, especially the main computer which malfunctioned on Tranquility when that station launched. All seems well. After five days, Intrepid M-2 returns home. This time the deoribt burn is correct, ensuring a proper splashdown.

 

Serenity Transfer Stage

Attach a transfer stage to Serenity station and send it to Minmus.

Date: Y8 D309  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

The transfer stage for Serenity is launched on day 309. It is a standard four-engined spacetug equipped with a docking adapter to fit the new compressable docking port. Its job is to move the station from LKO to Minmus. However, it is discovered soon after docking that the tug does not have enough dV for this maneuver.

Keystone 9F is sent to assist. It arrives a few days later, but even after topping off the tanks, the numbers still fall short. A more powerful vehicle will be needed to successfully execute the transfer burn.

In the meantime, both Keystone 9F and the tug undock from the station. The latter jettisons the adapter for the compressable docking port. It will enter Kerbin's atmosphere and burn up.

The tug then docks to the rearward facing docking port on Keystone and brings it up to a higher orbit. After transfering fuel back to Keystone's tanks, the tug finally undocks and deorbits itself.

 

-- -- -- END OF MISSION LOG 024 -- -- --

[SBKerman]

Dauntless 6

Expedition Harmony 9.

Date: Y8 D353  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P2 Valentina, E1 Siesen, S0 Eiller, S1 Kirfal

Spoiler

Dauntless 6 brings the next expedition to Harmony station. Val, Siesen, Eiller and Kirfal will not set foot on Kerbin again for quite some time. In an effort to practice for interplanetary voyages, all long-term space station missions have been extended to two years. Expedition 9 is the first to implement this new duration.

The departure of the previous crew aboard Intrepid 24 carries with it some historical significance. For the last time, an Intrepid spacecraft, in its original form, brings kerbonauts back from space.

After splashdown the following day, the command module is taken to the space center. It will be refurbished and placed in a museum.

Back on Harmony, the new crew activate the cupola for the first time. It gives them a great view of their home planet. So great in fact, that mission control has to implement a strict schedule to keep them from spending all their time looking at Kerbin.

 

Serenity Transfer Stage 2

Send Serenity to Minmus using a new cryogenic transfer stage.

Date: Y8 D371  Launch site: KSC  Launch vehicle: Phoenix 321  Crew: - - -

Spoiler

A Phoenix 421 launches a prototype spacetug in a second attempt to get Serenity to Minmus. The new vehicle is the first to use cryogenic fuel. Keeping the tanks cool proves more energy intensive than expected. It almost drains the batteries before docking is completed. This will be fixed in future production models.

Once connected to the station, STS-2 performs the injection burn.

Serenity arrives at Minmus on day 382. The transfer stage undocks one day after that. It is left in orbit for the time being.

 

Serenity Module 2

Add a second module to Serenity with a lab, storage space and fuel tanks.

Date: Y8 D385  Launch site: KSC  Launch vehicle: Phoenix 344  Crew: - - -

Spoiler

The second module to be added to Serenity is launched on the first Phoenix 344, the heaviest launch vehicle to date.

The four liquid fuel side boosters burn out and are jettisoned. They descend on parachutes for recovery.

The station module is propelled towards its target by the attached spacetug.

Ten days after liftoff, the module arrives at Serenity and is soft docked to the station. A later spacewalk will be required to join the two parts together using the compressable docking ports.

 

Dauntless 7

Expedition Tranquility 6.

Date: Y8 D419  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: S1 Arory, S1 Dunrie

Spoiler

When Dauntless 7 lifts off, it carries only two of the four crewmembers for expedition 6. The rest will arrive later aboard the new Explorer lander which is set to launch soon.

Upon landing, the Phoenix booster tips over, but is thankfully not damaged.

Dauntless 7 arrives at the station on day 421. The crew watch as Keystone 10 undocks, leaving a port accessible to them.

After docking, Arory and Dunrie join the resident crew as they say good bye the Spider lander. It will be transfered to Minmus where it will serve the new Serenity station. The uncrewed Spider docks with the spacetug that was used to bring module 4-1 to Tranquility. The engines on the tug then fires to take the lander to its destination.

It is now time for expedition 5 to return to Kerbin. They undock Dauntless 4 and burn for home.

Landing occurs on day 425, concluding the last flight of the year.

 

-- -- -- END OF MISSION LOG 025 -- -- --

Edited October 27, 2020 by SBKerman

[SBKerman]

Explorer 1

Place new Mun lander in parking orbit around Kerbin.

Date: Y9 D3  Launch site: KSC  Launch vehicle: Phoenix 424  Crew: - - -

Spoiler

The first payload of the year to reach orbit is Explorer 1, the new Mun lander to be sent to Tranquility.

It is placed in a parking orbit around Kerbin, where it will await the remaining expedition 6 crewmembers.

 

Intrepid M-3

Send the rest of Expedition Tranquility 6 to the station via Explorer 1.

Date: Y9 D6  Launch site: KSC  Launch vehicle: Phoenix 000  Crew: P1 Eilbin, P1 Wehrfurt, E1 Madming

Spoiler

Eilbin, Wehrfurt and Madming launch aboard Intrepid M-3 on the sixth day of the year.

They dock with Explorer 1 shortly thereafter.

The next day, Wehrfurt and Madming transfer to the lander while Eilbin returns to Kerbin with Intrepid M-3.

After a thorough systems check, the crew light the lander's engine for the transmunar injection burn.

Explorer 1 reaches the Mun and docks to Tranquility on day 9. Although not built for this type of transfer, the new vehicle worked so well in this capacity that it actually sparks the idea of using Explorer as the basis for a type of shuttle between Kerbin and its moons. That is a project for a later date though. Right now, Explorer 1 needs to be refuled before it can be used in its primary role as a lander.

 

Keystone 12

Launch Tranquility resupply craft on new semi-reusable launch vehicle.

Date: Y9 D11  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

The plan was to launch Keystone vehicles to the Mun and Minmus on Phoenix 344 rockets. But no matter how hard they try, the engineers are unable to come up with a configuration that works within the confines of the 344's payload capacity. Instead, a new type of launch vehicle will be used. Known as Icarus, it is a two stage rocket, augmented by two large solid rocket boosters. Having been in development for a couple of years, it is brought into service to launch Keystone 12. The Keystone vehicle itself has also been slightly modified, with the fuel tanks around its engines removed to reduce weight.

The first Icarus rumbles off the pad on day 11 to the cheers of everyone in mission control.

The boosters burn out and are jettisoned. They are equipped with parachutes and will be recovered.

After fairing deployment, the rocket continues its way to orbit. The next step is what really sets it apart from the Phoenix. When the fuel runs out, the main engine is jettisoned. It will descend via parachute so that it can be reused. Then, the main tank falls away. It will not be recovered. Finally, the second stage ignites for the last push to orbit. Although more expensive than with full reusability, the system has been set up this way to maximize the vehicle's payload capacity.

The Icarus second stage ignites again to transfer Keystone 12 from Kerbin to the Mun. It is jettisoned shortly before arrival, with the intent being to have it reenter Kerbin's atmosphere and burn up. This does not work however, and the stage is left in an elliptical orbit. It may be possible to retrieve it using Keystone 9F, but further calculations will have to be made before such an operation is attempted.

Keystone 12 docks to the station on day 13. All in all, the first flight of Icarus has been a success. Each recoverable item is collected and brought back for refurbishment.

 

Keystone 13

Deliver supplies to Serenity station.

Date: Y9 D15  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

A second Icarus rocket launches Keystone 13, bound for Serenity station.

It goes through the same process of recovering the boosters and main engine.

The second stage then hurls Keystone 13 towards Minmus. It is jettisoned just before entering the moon's sphere of influence. This time the disposal of the stage works, as it reenters the atmosphere of Kerbin and is destroyed.

Keystone 13 captures into Minmus orbit and docks to Serenity on day 25.

-- -- -- END OF MISSION LOG 026 -- -- --

Edited October 6, 2020 by SBKerman

[KerballingSmasher]

Man, that is a cool two (three?) stage rocket!

[SBKerman]

Dauntless 8

Expedition Serenity 1. Test Dauntless Extended Mission Module and continue assembly of Serenity station.

Date: Y9 D27  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Glesy, E1 Bill

Spoiler

Dauntless 8 launches pilot Glesy and engineer Bill on a multifaceted mission. First, they will dock with and extract the experimental EMM which is carried below the spacecraft in an extended fairing. The EMM, or Extended Mission Module, has been developed to give kerbonauts more legroom on longer voyages such as to Minmus. Next, the crew will dock with Serenity in Minmus orbit and act as the first expedition to the station. Their primary work will be to get the remaining modules installed.

However, they never reach Minmus, let alone Kerbin orbit. Shortly after separation of the SRBs, something triggers the ejection of the fairing panels and launch escape tower. With vital parts of the payload unprotected, the rocket begins to spin out of control. Glesy pulls the abort lever, which is supposed to shut off the engines and separate the command module. The module does separate, but the engines remain running. This causes the two vehicles to violently smash into the each other. Through sheer luck, the command module is not seriously damaged.

After the scariest ride of their lives, Glesy and Bill can breathe a sigh of relief as the command module clears the out-of-control rocket. The parachutes deploy shortly after and the crew makes a safe splashdown. An investigation into the cause of the failure is immediately launched. In the meantime, all Dauntless flights are postponed.

 

Valiant Test Flight 4

Final atmospheric test flight of the Valiant spaceplane.

Date: Y9 D34  Launch site: Dessert  Launch vehicle: Goblin  Crew: P1 Sarah

Spoiler

While the Dauntless 8 launch failure is being investigated, another project is taken off the back burner. The Valiant spaceplane is rolled out to the Dessert launch pad for one final low altitude test flight. This time there is a pilot in the cockpit.

The stout Goblin pushes the plane skywards. When the rocket has run out of fuel it separates and lands back at the launch site via parachutes.

The Valiant continues to gain altitude for a few more seconds. Once it levels out, Sarah takes control and begins to circle the area. During the flight, she fires the engines a few times to test their effectiveness in the atmosphere.

As she gets closer to the ground, Sarah deploys the parachute and airbags. Soon after, Valiant lands safely next to the runway.

The last bit of testing is to extend the solar panels to make sure they work even after the airframe has been through some stress. They do and the project can move on to the next step; an orbital test flight.

 

Dauntless 9

Bring three tourists to munar orbit.

Date: Y9 D36  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Jeaneane, Helemone, Thomhat, Lodtrey

Spoiler

Analysis of the Dauntless 8 failure has shown that the problem is limited to the modified rocket used for that launch. The flight of Dauntless 9 on a regular Phoenix 043 is therefore given the green light. Lifting off on day 36, it will take three tourists around the Mun.

The booster falls over after landing, but sustain no significant damage.

After the transfer to the Mun, pilot Jeaneane and the tourists stay for a few orbits. As a matter of fact, they are not allowed to leave until UAA's legal team has made sure all contracts are fullfilled, so as to not repeat the mistake made on the Intrepid 8 flight.

With both the legal team and the passengers satisfied, Dauntless 9 returns to Kerbin on day 39.

 

-- -- -- END OF MISSION LOG 027 -- -- --

 

On 3/24/2020 at 8:01 PM, Kerballing (Got Dunked On) said:

Man, that is a cool two (three?) stage rocket!

Thanks! It was my attempt at a Titan III type of rocket combined with Vulcan SMART reuse.

[SBKerman]

Dauntless 10

Expedition Serenity 1. Test Dauntless Extended Mission Module and continue assembly of Serenity station.

Date: Y9 D59  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Glesy, E1 Bill

Spoiler

Dauntless 10 is a repeat of the ill-fated Dauntless 8 with the same crew and the same setup, but with a properly configured rocket.

This time the launch is successful. The extended panels that protect both the EMM and the service module are jettisoned at the correct time. Once in orbit, Dauntless 10 separates from the rest of the stack. Pilot Glesy turns the spacecraft around and starts the extraction maneuver.

She docks with the EMM and pulls it free of the launch vehicle.

With the module activated, the injection burn can commence.

Back on Kerbin, the Phoenix has a rough but survivable landing.

Dauntless 10 and its crew docks with Serenity on day 69. It has not a been a smooth ride. Having the EMM attached not only adds weight, but also shifts the center of mass. This led to some instabilities during the injection burn, which required several correction maneuvers. Because of this, and the extra weight, more fuel was depleted than planned.

Luckily, the spacetug still docked to module 2 has some fuel left. This is pumped over to Dauntless 10 before the tug undocks and deorbits using RCS.

Two days later, Bill and Glesy begin the first ever EVA in Minmus orbit. They remove some external equipment that is no longer needed. Following that, they activate the compressable docking ports connecting modules 1 and 2. This creates a permanent link between the two.

Once the EVA is over, Keystone 13 undocks to make way for the next supply vehicle.

 

Keystone 14

Bring fertilizer for food production and material for new habitation module to Serenity station.

Date: Y9 D91  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

Keystone 14 is launched towards Minmus by an Icarus rocket. It carries material that will be used to inflate the upcoming module 3, as well as fertilizer for some greenhouses that will be added shortly as well.

Following second stage separation, the spacecraft captures into orbit under its own power.

It docks to the station on day 101.

 

Serenity Module 3

Add an inflatable habitat to the station.

Date: Y9 D102  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

Module 3 will add an inflatable habitat to Serenity. It is of the same design as the ones used on Tranquility and Harmony.

This time the Phoenix booster lands without falling over, unlike the previous two attempts.

The new module arrives at the station and is docked on day 112.

The same day, Glesy and Bill go on a spacewalk to remove spent thruster blocks and prepare the module for use.

The hab is then inflated following the end of the spacewalk.

 

Serenity Station Ops

Land kerbals on Minmus for the first time.

Date: Y9 D127  Launch site: Serenity  Launch vehicle: Spider  Crew: P1 Glesy, E1 Bill

Spoiler

Analysis of the data from the second Spider landing on the Mun has shown that a software error caused the engine to operate at too low a thrust level. This has since been fixed and the lander is cleared for use at Serenity. Spider, and the attached spacetug that transported it from the Mun, have been in Minmus orbit since they arrived on day 3. Now, 122 days later, they begin the rendevouz maneuver that will take them to the station.

Docking takes place the following day, with Spider and the tug separating and using different ports.

There is enough fuel in the tug to allow refuling of Spider after a Minmus landing. With this in mind, the station crew request permission to take her down to the surface. Permission is granted and they undock on day 127 to begin the descent.

History is made as the lander sets down in the greenish regolith of the small moon.

Bill Kerman taking kerbalkind's first steps on Minmus.

It is a short visit for the two kerbonauts. They basically just plant a flag and grab some samples.

To everyone's great relief, the ascent is free of problems. Spider docks to the station once more and is refuled by the spacetug. The tug then undocks and is sent crashing into Minmus.

 

-- -- -- END OF MISSION LOG 028 -- -- --

[SBKerman]

Serenity Module 4-1/4-2

Add two habitation modules with integrated greenhouses.

Date: Y9 D128/140  Launch site: KSC  Launch vehicle: Phoenix 343  Crew: - - -

Spoiler

The first of two identical modules is launched on day 128. It is made up of a habitation section, a storage section and a small greenhouse for food production. The module reaches the station and docks on day 138.

The second module is launched two days later.

It arrives at Minmus on day 150 and docks to the station opposite module 4-1.

The following day, Keystone 14 undocks and deorbits. Having taken on fuel from its counterpart, the space tug that brought module 4-1 to the station is moved to the docking port left open by Keystone. It will be used to refuel the Spider lander. The second tug undocks and uses its RCS to deorbit itself.

An EVA is performed shortly after. Bill removes temporary mounting plates from the new modules, while Glesy collects data from Spider's scientific instruments and moves it over to Dauntless 8. It is the last major task for the crew before returning to Kerbin.

Minmus station Serenity is now in its final planned configuration.

 

Dauntless 11

Expedition Serenity 2.

Date: Y9 D191  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Hadlong, E1 Newbin, S1 Malbart, S1 Munski

Spoiler

Glesy and Bill board Dauntless 8 and undock from the station on day 169.

As they approach Kerbin nine days later, they jettison the extended mission module and the service module.

It is a precarious night landing on the slope of a hill, but the crew and capsule are recovered safely.

Day 191 sees the launch of the next expedition to Serenity. It is also the first four-kerbal crew to visit the station. They will remain there for the now standard two year duration.

Dauntless 11 carries the same extended mission module as Dauntless 8, although it has been modified with additional fuel tanks. After reaching orbit, pilot Hadlong executes the transposition, docking, and extraction maneuver.

Because of the extra tanks added to this EMM, the Phoenix launch vehicle is left with less fuel for the landing. It manages to deorbit, but does not have enough for correction burns. Because of this, the rocket overshoots the space center and lands in the ocean instead. Parts of it is recovered, but much has been damaged beyond repair.

Despite the loss of the launch vehicle, the rest of the flight continues as planned. The crew still experience some instability with the combined spacecraft and EMM, but nothing too critical. Dauntless 11 docks to Serenity on day 201.

 

Keystone 15

Deliver supplies, fertilizer and two greenhouses to Tranquility station.

Date: Y9 D224  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

On day 211, Wehrfurt and Madming begin an EVA to prepare Tranquility for a pending upgrade. It will be retrofitted with the same greenhouse cupolas that Serenity is equipped with.

Keystone 12 is deorbited the same day.

An Icarus rocket launches Keystone 15 on day 224. It is the last standard Keystone to fly. Future resupply missions will be handled by an upgraded version called Keystone Enhanced. This change will not affect the fuel-carrying variant.

The Icarus second stage takes the spacecraft all the way to munar orbit. It is then jettisoned to impact the Mun. This avoids the creation of debris as happend with the previous Keystone.

Keystone 15 arrives at Tranquility on day 225. In a second EVA, Wehrfurt and Madming replaces the outward-facing docking ports on modules 4-1 and 4-2 with the new greenhouse cupolas. They also move serveral packs of fertilizer over to the station.

It is a short stay for Keystone 15. When the EVA is over, it docks to the station so that the crew can unload the supplies. This only takes one day. The vehicle then undocks and performs the deorbit maneuver. It crashes into the Mun, taking the old ports with it for destruction.

 

Keystone 16F

Send fuel to Tranquility station.

Date: Y9 D228  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

Keystone 16F is launched on day 228. It carries fuel for the Explorer 1 lander.

The spacecraft is successfully transported to the Mun by the Icarus second stage.

Docking occurs the following day, after which the fuel transfer begins. The first landing attempt with Explorer is scheduled for later this year.

 

-- -- -- END OF MISSION LOG 029 -- -- --

Edited November 13, 2020 by SBKerman

[SBKerman]

Keystone 17F

Deliver fuel, a docking node and two cupolas to Harmony.

Date: Y9 D280  Launch site: KSC  Launch vehicle: Phoenix 322  Crew: - - -

Spoiler

The second phase of upgrades to Harmony station begins with an EVA by Valentina and Siesen. They spend day 257 making preparations for the arrival of new components to be added to the exterior.

On day 280, Keystone 17F is launched. It addition to fuel, it also carries a docking node extension that will be attached to module 1. Two small viewing cupolas make up the rest of the payload. The extra weight means the Phoenix booster does not have enough fuel for landing. It will remain in orbit for the time being.

When the Keystone and its cargo arrives at Harmony, Val and Siesen begin their second EVA. They start by installing the cupolas on Modules 4-1 and 4-2.

The next step calls for module 1 to undock from the rest of the station. Before this is done, the two kerbonauts move the new docking node from the front of Keystone 17F to a temporary mounting fixture. The Keystone then docks to module 1 and pulls it away from Harmony.

When Val and Siesen have completed the installation of the new node, Keystone 17F brings module 1 back to dock with the station. Finally, during a third spacewalk on day 283, Val and Siesen finish their work by removing the mounting fixture, a number of handrails, and a set of old thruster blocks left on module 5-2 from when the station was first constructed. The operation has resulted in two new docking ports being available for additional modules.

 

Harmony Module 9

Add a fuel depot to Harmony station.

Date: Y9 D306  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

Module 9, being to heavy for any of the current Phoenix variants, is launched on day 306 by an Icarus rocket.

The module, which will serve as a fuel depot, is docked to one of the ports on the new node extension. Propellant is then pumped over from Keystone 17F, topping of the partially filled tank.

Three days later, Valentina and Siesen begin their fourth EVA during which they remove spent thruster blocks from the new module.

 

Keystone 9F

Clear low Kerbin orbit of debris.

Date: Y9 D310  Launch site: LKO  Launch vehicle: - - -  Crew: - - -

Spoiler

On day 310, Keystone 9F docks with and refuels the spent Phoenix booster from the Keystone 17F launch.

The booster then makes a landing at the KSC. It ends up on its side, but is not seriously damaged.

Six days later, Keystone 9F docks with another piece of space debris; a fuel tank from one of the early Icarus rockets. It is brought into a suborbital trajectory.

After having returned itself to orbit, Keystone 9F attempts to reach Harmony station to restock. However, it lacks the necessary fuel and ends up about 100 km from its target. Instead, Keystone 17F departs the station to rendezvous with the stranded 9F. The two vehicles are docked together on day 317. 17F refuels 9F and brings it to a stable 120 km circular orbit.

Having completed all of its objectives, Keystone 17F is sent into Kerbin's atmosphere where it is destroyed by the heat of reentry.

 

Serenity Station Ops

Second Minmus landing.

Date: Y9 D319  Launch site: Serenity  Launch vehicle: Spider  Crew: P1 Hadlong, S1 Munski

Spoiler

With Spider back in full operation, Serenity crewmembers Hadlong and Munski prepare to take a trip down to the surface of Minmus for a second landing on the small moon.

Descent and touchdown are free of problems.

Once on the the ground, the obligatory flag planting takes place. The two kerbonauts remain on the surface for a few hours, taking readings and collecting samples.

When their work is done, they board Spider again and begin the ascent.

Hadlong and Munski redock with the station on day 320.

 

Tranquility Station Ops

Third Mun landing.

Date: Y9 D320  Launch site: Tranquility  Launch vehicle: Explorer 1  Crew: P1 Wehrfurt, E1 Madming

Spoiler

On the same day as Hadlong and Munski return from the surface of Minmus, Wehrfurt and Madming depart Tranquility station. Their job is to test the new Explorer 1 lander.

They perform the deorbit burn and and make a safe landing on the far side of the Mun.

The ladder, which went through some revisions during the design phase, is extended.

The two kerbonauts exit the hatch and make their way down to the ground, thus becoming the third crew to walk on the munar surface.

After planting a flag, they begin their work proper. While Madming inspects the lander, Wehrfurt takes as 480 meter trek southeast. He collects samples and studies some interesting rock formations and craters. When he returns, Madming has configured Explorer 1 for an extended stay.

The crew remain on the Mun for five Kerbin days, testing the habitability of the lander. During this time, they also evaluate the landing area as a possible site for a permanent base. The relatively flat terrain appears favourable.

On day 325, Explorer 1's engine is ignited for the blast-off. It takes the crew a few hours to make orbit and return to dock with the station.

Once they are back, Madming executes an EVA to move the samples and other collected data from the lander to Dauntless 7.

The following day, Keystone 16F transfers the remaining fuel from its tanks over to Explorer 1. It then undocks and deorbits itself. Another refueling mission will be required to fully top of the lander.

 

-- -- -- END OF MISSION LOG 030 -- -- --

Edited April 30, 2020 by SBKerman

[SBKerman]

Dauntless 12

Deliver scientific instruments and take three tourists to Tranquility.

Date: Y9 D328  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Eilbin, Geoffurt, Tamster, Tomwin

Spoiler

Following the successful test of the new lander, preparations are being made for a full-on exploration of the Mun's surface. The first step involves getting all the necessary equipment in place. Dauntless 12, a tourist flight to Tranquility, carries the initial batch of scientific instruments to the station. The launch of the spacecraft also sets a new record as it brings the number of kerbals in space up to 16.

Dauntless 12 docks to the station on day 330 and unloading begins immediately.

Four days later, the spacecraft makes its return to Kerbin. During landing, the command module touches down dangerously close to a cliff face. Pilot Eilbin makes sure not to tell the passengers how close to disaster they actually were.

 

Keystone 18

Deliver supplies and equipment to Tranquility station using the new Keystone Enhanced vehicle.

Date: Y9 D356  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

Keystone 18 is the first Enhanced version of the supply vehicle to launch. Separated storage sections allows it to carry two different resources at once, although on this flight, there are only supplies on board. It also has a third storage area for tools and equipment, which on this flight is filled with scientific instruments.

Docking occurs on day 357.

The following day, all cargo has been unloaded. Keystone 18 undocks and deorbits.

 

Dauntless 13

Test Dauntless Mk2 spacecraft in Kerbin orbit and take three tourists to Harmony.

Date: Y9 D365  Launch site: KSC  Launch vehicle: Phoenix 043  Crew: P1 Sarah, Serena, Mabas, Patble

Spoiler

Dauntless 13 lifts off on day 365. It is the first test flight of an upgraded version of the spacecraft. Additionally, it will take three tourists on a short trip to Harmony station.

Although some changes have been made to the command module, most of the upgrades are found in the service module. Both the electrical system and life support have received extensive modifications. Additional fuel tanks have also been installed. These changes should increase the range of the Dauntless, especially when used with the Extended Mission Module. The EMM itself is also being modified and will be tested on the next flight.

The Phoenix booster that brought Dauntless 13 to orbit is unfortunately lost when its landing parachutes fail to deploy.

After running tests on the RCS, Sarah fires the spacecraft's main engine to rendezvous with Harmony.

Dauntless 13 docks to the station for a ten day visit.

On day 375, Sarah and the tourists return to Kerbin. The first test of the Mk2 vehicle has proven successful, paving the way for a second test to Minmus.

 

Dauntless 14

Test Dauntless Mk2 with Extended Mission Module in Minmus orbit and bring two tourists along.

Date: Y9 D421  Launch site: KSC  Launch vehicle: Phoenix 044  Crew: P1 Sarah, E1 Seewin, Jalin, Tedton

Spoiler

The second test of the Mk2 version of Dauntless will take pilot Sarah and engineer Seewin to Minmus orbit. Joining them are two tourists; Jalin and Tedton.

After launch on a powerful Phoenix 044, the crew detach Dauntless 14 and turn it around. They then dock with and extract the Extended Mission Module.

The new EMM is equipped with RCS thrusters to keep the vehicle stable during docking maneuvers. The thrusters are tested in LKO before the main mission commences.

Two engine burns send Dauntless 14 towards Minmus. Ten days later, another series of burns capture the spacecraft into orbit and circularize it at around 28 km. This simulates a rendezvous with the space station. Thanks to the increase in fuel, there is enough dV to return to Kerbin with some to spare. However, that is still a few days away.

Dauntless 14 remains in orbit over the new year. Tests are run on the upgraded systems, the crew communicates with Expedition Serenity 2, and the tourists just enjoy the sights. When the time comes to return home, a single burn of the engine sends them on a path towards Kerbin.

The crew and passengers of Dauntless 14 land back on Kerbin on day 24. The success of their flight means that the new Mk2 can be put into service, replacing the older Mk1.

 

Keystone 19

Deliver supplies and equipment to Serenity station.

Date: Y9 D425  Launch site: KSC  Launch vehicle: Icarus  Crew: - - -

Spoiler

Keystone 19 is launched only a few days after Dauntless 14, which at the time is still in transit to Minmus. It is the last launch of year 9.

As the craft nears Minmus' sphere of influence, the Icarus upper stage is jettisoned. Unfortunately, this happens earlier than expected. The stage thus fails to reenter Kerbin's atmosphere and is trapped in a higly eccentric orbit. This does not affect the mission however, and Keystone 19 captures around Minmus as planned.

Rendezvous and docking takes place on day 9 of the new year. The crew then quickly unload the cargo.

Keystone 19 is disposed of by deorbiting later the same day.

 

-- -- -- END OF MISSION LOG 031 -- -- --

Edited October 22, 2020 by SBKerman

[SBKerman]

Vanguard 1

Launch the first interplanetary probe to Duna.

Date: Y10 D25  Launch site: KSC  Launch vehicle: Phoenix 300  Crew: - - -

Spoiler

Vanguard 1, UAA's first mission to another planet, is launched into low Kerbin orbit atop a Phoenix 300.

Before departure, the on-board instruments are tested and their data transmitted.

Using its own propulsion, Vanguard 1 performs the transfer burn. The probe will arrive at Duna periapsis in about 311 days, where it will attempt to capture into orbit.

 

-- -- -- END OF MISSION LOG 032 -- -- --

[SBKerman]

Phoenix II

Introducing the next generation launch vehicle.

Spoiler

The United Aerospace Alliance's current fleet of active launchers; the fully reusable Phoenix IIA, IIB, IIC, IID, IIE and IIF, and the semi-reusable Icarus.

The Phoenix reusable launch vehicle has served the UAA well since the start of space operations. However, it is not without shortcomings and for the past few years, engineers have been working on improving the venerable rocket. At first, they looked at simply applying upgrades to the existing design, but as the project grew, so did their plans. What they ended up with is an almost entirely new vehicle. This new vehicle, named Phoenix II, comes in six different variants.

The Phoenix IIA is the base-line version, capable of placing 11,800 kg in a 100 km circular orbit around Kerbin. Compared to its predecessor, it features a redesigned fuselage, upgraded avionics, and a new payload shroud. The four K-1 "Kiwi" main engines have been replaced with two powerful M-1 "Moa" engines, reducing complexity while boosting performance. To improve landing accuracy, the IIA also sports upgraded thrusters and four airbrakes. Larger landing legs provide better stability at touchdown. The protective airbags have also been enlarged and moved higher up on the airframe to reduce the risk of damage if the rocket tips over.

The Phoenix IIB adds two recoverable liquid fuel strap-on boosters to the core vehicle. These are the same boosters introduced on the original Phoenix in late year 7, only slightly modified to hold more propellant. They give the IIB variant an increased payload capacity of 17,400 kg.

Next is the Phoenix IIC. It takes the strap-on boosters of the IIB, stretches their fuel tanks, and replaces the Kiwi engines with Moa engines. This allows it to launch 22,200 kg to low Kerbin orbit.

The most capable variant is the Phoenix IID, which uses two shorter versions of the core stage as strap-on boosters. With a total payload capacity of 38,000 kg, it surpasses the Icarus in lifting power.

The Phoenix IIE is intended for lighter payloads of up to 6,900 kg. It was created by taking one of the boosters from the IID and adding the avionics, payload and landing hardware from the core vehicle.

While designing the IIE, the engineers were asked to produce a special version capable of launching the Intrepid-M spacecraft. Thus, the IIF was born. The two recoverable solid fuel boosters add another 2,900 kg to the rocket's payload capacity. It is the only Phoenix II variant to use SRBs.

 

Space Station Ops

Inspect hardware on each station.

Spoiler

A few weeks ago, the crew of Tranquility noticed that parts of the station, as well as parts of the docked spacecraft, have started to change color. Soon after, the same phenomena was observed at the other stations as well. The cause of this discoloration is unknown*, but it seems to only affect specific parts. Although no problems with hardware have yet been reported, there is a growing concern that a critical failure may occur at some point. To assess the situation, each station is given a thorough inspection, beginning with Tranquility.

This is followed by inspections of Serenity and Harmony a few days later. Harmony seems least affected and scientist hypothesize that it might be protected by Kerbin's magnetosphere. Further investigation into what has become known as the Great Anomaly narrows the issue down to parts made from certain materials. It could become necessary to replace a lot of the current space infrastructure if no other solution can be found.

(*) Deprecated parts and updated part variants are the IRL causes.

 

Vanguard 1

First probe in interplanetary space.

Spoiler

On day 55, Vanguard 1 becomes the first kerman made probe to transmit science from interplanetary space as it travels between Kerbin and Duna.

 

Nova 1

Launch a new type of fuel carrier to Tranquility station.

Date: Y10 D62  Launch site: KSC  Launch vehicle: Phoenix IID  Crew: - - -

Spoiler

To support munar surface operations, a new vehicle for delivering fuel has been developed. If successful, it will replace Keystone F (which, incidentally, is one of the vehicles affected by the material deterioration problem). Nova 1 is launched on day 62 by the first ever Phoenix II in its heaviest configuration.

Weighing in at close to 36 tonnes, it is the most massive payload brought to orbit thus far.

The Phoneix II proves very capable, and even scores a perfect landing at the KSC.

To help identify individual vehicles externally, the UAA has decided to start painting the mission numbers on the hulls.

After coasting for a while, Nova 1 fires its dual engines for the transmunar injection. It is headed for Tranquility, where it will refuel the Explorer 1 lander. At first, it seems to be on a good trajectory, but as the spacecraft arrives at the Mun, it becomes clear that it is way off. A number of longer than planned burns are necessary to bring Nova 1 to the station.

Despite this mishap, Nova 1 still delivers twice the amount of fuel that a Keystone F is capable of.

 

Dauntless 15

Deliver a fresh spacecraft to Harmony station and return Dauntless 6 for inspection.

Date: Y10 D80  Launch site: KSC  Launch vehicle: Phoenix IIC  Crew: P2 Sarah, E2 Bill

Spoiler

The first launch of a crew on a new Phoenix II takes place on day 80, when Sarah and Bill ride the C variant aboard Dauntless 15. This is the third consecutive Dauntless flight piloted by Sarah.

The mission is to bring the aging Dauntless 6 back for inspection of its command module at the space center. This will determine what, if any, damage it has sustained from the recent anomaly. In its place, the crew will leave Dauntless 15. This is a new Mk3 version, which has received further upgrades to combat material degradation.

After using the air brakes to stop it from overshooting the space center, the launch vehicle sets down right next to the launchpad in another perfect landing.

Sarah and Bill arrive at Harmony station a few hours later. They dock to the forward facing port and immediately get to work.

Bill and resident engineer Siesen begin an EVA to remove the few components on the station that have been affected by the anomaly.

After completion of the EVA, Bill and Sarah move the components, along with a few other items from station storage, over to Dauntless 6. They then board the craft and undock after a day's work.

The most worrying part of the mission is the fact that the mechanism for seperating the Dauntless service module has shown signs of degradation. However, it functions properly and the crew land safely within sight of the Island Airfield.

 

-- -- -- END OF MISSION LOG 033 -- -- --

 

A quick update on the game and this mission report. I have moved the save over to a fresh KSP 1.8.1 install and everything seems to be working fine. In the process, I decided to do some minor changes to the mod lineup. Some were added, some removed, and some replaced. For example, I switched from Stock Visual Enhancements to Astronomer's Visual Pack so starting with this mission log, screenshots may look slightly different. I plan to phase out another mod or two once they're no longer in use.

Edited October 6, 2020 by SBKerman

[SBKerman]

Keystone 9F

Deorbit debris.

Spoiler

Keystone 9F, which has been badly affected by the Great Anomaly, is sent on a last mission to deorbit the debris caused by Keystone 19.

The first stop is at Harmony, where 9F picks up the spacetug that brought the fuel depot to the station. The tug will be used as a propulsion module to reach the target.

Just as the two joint vehicles leave the station, the mission is suddenly called off. It has been discovered that the debris is in a retrograde orbit which the Keystone and tug combination is unable to reach. The kerbal responsible for keeping an eye on the nature of the orbit claims that the reason he missed it was because the computer monitor on his desk had been placed upside down. He is told repeatably that this is not how reality works, but he sticks to his story. Regardless, the mission is over. Keystone 9F and the tug separate and redock to the station.

 

Serenity Transfer Stage 2

Return spacetug to Kerbin orbit.

Spoiler

STS-2, which brought the Serenity core module to Minmus almost a year and a half ago, has been in orbit around the small moon ever since. Seeing as the tug is still operational, it is decided to bring it back to Kerbin. The plan is to retrofit it with the claw from Keystone 9F. On day 94, the cryogenic engine is ignited, sending the vehicle back towards its home planet. It captures into a roughly circular 76 km orbit a few days later.

 

Placidity/Chibi/Touchstone

Test prototype surface base, rover and supply vehicle.

Spoiler

Preparations for the exploration of Kerbin's moons continue with a range of tests at the Dessert launch site, starting on day 105. A crew of veteran kerbonauts, E1 Siglas, S1 Bob, E2 Bill and P2 Sarah, will spend fourteen days living and working in a prototype habitat. If the design is accepted, this hab will form the core of Mun base Placidity.

During this time, the crew also test the new Chibi rover. Sarah and Siglas take it for a drive from the runway to the launchpad. They both agree that the small two-seater operates well and that it is equally practical and adorable.

At the launchpad, the two kerbonauts inspect a third prototype. This one is called Touchstone and is intended to deliver supplies to the base. It is basically a Keystone with legs.

Early the next morning, Bill takes the Chibi rover back to the launchpad to test a resource transfer system that has been built into the Touchstone vehicle. He then returns to the habitat where the rest of the crew are busy checking the life support systems. Finally, at the conclusion of the test perid, the group compile a list of improvements they feel need to be incorporated into the various designs. More tests will follow later on.

 

Keystone 20

Send tools and fertilizer to Harmony station.

Date: Y10 D131  Launch site: KSC  Launch vehicle: Phoenix IIB  Crew: - - -

Spoiler

To prepare for the arrival of the next vehicle to Harmony station, Keystone 9F is moved between docking ports.

Keystone 20 is launched on day 131 by a Phoenix IIB rocket. It carries tools, spare batteries, and fertilizer for the greenhouses.

After having placed the payload in orbit, the Phoenix returns to the KSC. It lands right next to the pad from where it lifted off.

Meanwhile, Keystone 20 makes its way to the station, where it docks at the aft docking port.

Three days later, STS-2 is also sent to the station. When it arrives, engineer Siesen installs an adapter to the front of the tug so that it can dock to the station.

Siesen is then joined on the EVA by station commander Valentina. Together, they install additional batteries on STS-2 to improve its fuel tank cooling system. They also detach the claw from Keystone 9F and move it to a temporary fixture on STS-2. It will be attached properly when the vehicle is ready to leave the station.

Keystone 20 undocks later that day. It sill has large amounts of fertilizer in its tanks and will wait in a lower parking orbit for a return to the station when needed.

 

Nova 2

Bring cryogenic fuel to Harmony station.

Date: Y10 D139  Launch site: KSC  Launch vehicle: Phoenix IID  Crew: - - -

Spoiler

Day 139 sees the launch of Nova 2. It has had its main tank converted to hold cryogenic fuel. This will be used to refuel STS-2 at the station.

Since Nova 2, with its cargo of liquid hydrogen, is much lighter than a regular Nova vehicle, the use of a Phoenix IID is really overkill. As a result, the booster has too much fuel left when landing, causing two of the legs to break under the weight. Luckily, the improved airbags save the Phoenix from being completely destroyed.

After arriving at the station, Nova 2 docks to the aft port and begins transfering its content over to STS-2.

With a substantial amount of fuel left, Nova 2 undocks and is placed in a parking orbit for later use.

The next vehicle to undock is STS-2, now renamed Nebula 1. Before it leaves, Siesen performs another spacewalk to relocate the claw to its proper position. Nebula 1 is then moved to a higher orbit. It will remain on standby since there are no immediate missions for it.

Lastly, the spacetug that brought the fuel depot to Harmony last year is deorbited.

 

Harmony Module 10

Add the final module to Harmony station.

Date: Y10 D156  Launch site: KSC  Launch vehicle: Phoenix IIA  Crew: - - -

Spoiler

Following the recent cleanup at Harmony, module number ten is launched on a Phoenix IIA. This addition will end the second phase of upgrades to the station. No more modules are planned for the time being.

However, something goes wrong. Shortly after liftoff, the rocket starts to oscillate back and forth. An abort is called and the payload is allowed to be jettisoned into the ocean.

As the Phoenix plummets through the air, the two main engines are fired again. This directs the impact site back over land. The parachutes and air brakes are then deployed while the engines continue to burn at low thrust to reduce fuel levels.

Against all odds, the Phoenix lands intact, allowing it to be recovered. An investigation of the booster and payload wreckage reveals that the problem was caused by a failure in the payload interface connection. A second launch will be attempted as soon as the backup article for the station module is made ready.

 

-- -- -- END OF MISSION LOG 034 -- -- --

Edited October 6, 2020 by SBKerman

[KerballingSmasher]

Wow. Nice save on that Phoenix!

 

Edit: WHEN DID I GET 1000 PLUS?!? UHHHH...

Edited October 7, 2020 by KerballingSmasher

[SBKerman]

Touchstone 1

Test automated landing at the Mun.

Date: Y10 D173  Launch site: KSC  Launch vehicle: Phoenix IID  Crew: - - -

Spoiler

A Phoenix IID launches Touchstone 1 on a test run to the munar surface. This is a vital step towards the establishment of a ground base.

The booster makes a pinpoint landing on the KSC runway.

After the supply vehicle has entered orbit around the Mun, Wehrfurt and Madming board Explorer 1. They undock and begin the descent, targeting an area near their previous landing site which they know is relatively flat. The lander will be used as a beacon for Touchstone's guidance system.

In the process the crew demonstrates accuracy themselves as they set down only 750m from the flag they planted last time. Having landed successfully, the kerbonauts then transmit their coordinates.

The first ever attempt at a fully automated Mun landing begins with Touchstone 1 performing a deorbit burn.

It uses the transfer stage for the first part of the descent. When it is out of fuel, the stage is jettisoned and the main engines ignite.

Unfortunately, these also run out of fuel a few meters above the ground. Touchstone 1 lands hard and bounces a few times, before settling down in the regolith. Two of the four solar panels are lost in the crash, but the vehicle remains functional.

Wehrfurt and Madming exit the lander and make their way to Touchstone 1. After inspecting it, they conclude that the mission can continue since the cargo has not been compromised.

They return to Explorer 1, where they will remain for an extended stay of up to 40 days.

 

Vanguard 1

Correction maneuver.

Spoiler

On day 179, Vanguard 1 performs a brief engine burn to correct its trajectory towards Duna.

 

Dauntless 16

Take three tourists to Tranquility station.

Date: Y10 D179  Launch site: KSC  Launch vehicle: Phoenix IIC  Crew: P2 Glesy, Frodous, Henwell, Peter

Spoiler

Dauntless 16 lifts off from the space center with pilot Glesy and three tourists bound for Tranquility. It will be the last such visit to the station. The UAA has decided to replace Tranquility with a new installation instead of trying to refurbish the damaged parts.

The booster overshoots the space center and lands in the ocean. Undamaged, it remains afloat long enough to be recovered.

The spacecraft docks to the port left available by the departure of Explorer 1 to the munar surface.

It has recently been discovered that two of the three storage areas on the station have developed leaks, ruining the equipment stored inside and rendering the storage unusable. This has further expedited the plan to replace Tranquility, as the integrity of the station is put into question. For their own safety, the visitors are confined to the rear habitation module during their brief stay.

Dauntless 16 returns to Kerbin six days later.

 

Harmony Module 10

Second attempt to add the final module to Harmony station.

Date: Y10 D200  Launch site: KSC  Launch vehicle: Phoenix IIA  Crew: - - -

Spoiler

After the engineers have checked and rechecked the connection between payload and rocket, Harmony Module 10 is launched for the second time.

Everything looks fine for the first part of the ascent, but as the vehicle is getting closer to apoapsis, fuel starts running low. There will not be enough to fully circularize. When the payload separates, it is still on a suborbital trajectory.

The attached spacetug has to act as a second stage to get the module to orbit.

The Phoenix booster makes a water landing far down range. It survives and is brought back for refurbishment.

Meanwhile, the tug brings its cargo to Harmony station, where it is docked opposite the fuel depot. During this operation, the tug struggles to orient itself. Upon closer inspection, several flaws are revelead in its design, including the lack of a proper reaction wheel and the use of RCS thruster made from material subject to degradation. Appropriate people are scolded and sacked, and the disgraceful spacetug is quickly deorbited.

After all the problems getting it there, the latest addition to Harmony is finally activated. The new module sports a second cupola from where to make astronomical observations. It also includes extra living space for the crew. This concludes phase two of the Harmony upgrades.

 

-- -- -- END OF MISSION LOG 035 -- -- --

 

On 10/7/2020 at 2:57 PM, KerballingSmasher said:

Wow. Nice save on that Phoenix!

 

Edit: WHEN DID I GET 1000 PLUS?!? UHHHH...

Thanks. It was a close call with the Phoenix. Also, that's a lot of plusses you got there.

[KerballingSmasher]

1 hour ago, SBKerman said:

Also, that's a lot of plusses you got there.

It is... Apparently I was racking them up during my break this summer!

[SBKerman]

Tranquility Station Ops

Return kerbonauts from the Mun to the station.

Spoiler

On day 214, Explorer 1 lifts off from the Mun with Wehrfurt and Madming. They have spent 40 days on the ground, supported by supplies from Touchstone 1.

The lander redocks with Tranquility and is refuled by Nova 1 the following day.

 

Placidity/Odobenus

Test prototype surface base and support rover.

Spoiler

An updated version of the Placidity Mun base prototype is brought to the Dessert launch site on day 240. It is once again crewed by Sarah, Bill, Siglas and Bob. They will spend five days testing the improved facility. They are also tasked with testing Odobenus, a large rover designed to support ground operations.

The rover, which holds supplies and furnishes electricity, is hooked up to the base for the duration of the test. Because of its size, the kerbonauts nickname the rover Bulk. The PR department is not happy about this, thinking that the official name conjures a much more elegant image.

When the crew leaves, Bulk Odobenus is sent on an autonomous drive through the desert. However, contact is lost after nine days. Debris is later found at the foot of a steep hill. The wheels have seemingly been unable to control the heavy vehicle when traveling on an inclination.

On day 264, an second Odobenus rover undergoes testing at the Dessert site. Featuring an additional set of wheels, more solar panels, increased battery capacity, and storage space for tools, this new model addresses some of the shortcomings of its predecessor. It still has troubles climbing hills, but the engineers are convinced this will not be a problem in the lower gravity of the Mun.

 

Intrepid M-4

Take two tourists to Harmony station.

Date: Y10 D243  Launch site: KSC  Launch vehicle: Phoenix IIF  Crew: P1 Jeaneane, Pholock, Sidley

Spoiler

Intrepid M-4, bound for Harmony station, lifts off from the space center on day 243 with pilot Jeaneane and two tourists aboard. It is the first Intrepid M flight in over a year and the first to launch on a Phoenix IIF.

The booster lands successfully, the first of the shorter core vehicles to do so.

After docking and disembarking the passengers, Jeaneane and the station crew unload a small cargo of scientific instruments.

A day later, Jeaneane and Siesen perform a spacewalk together. They attach the experiments to the hull of the station and collect some initial samples. They also remove thruster blocks from the recently added module 10. These blocks will be returned to Kerbin by Intrepid M-4.

The visitors stay for ten days, spending much of their time in the new observation cupola. It provides a great view of the Mun, the stars and space in general.

Jeaneane, Pholock and Sidley splash down safely on day 254.

 

Vanguard 2

Send a probe to Dres.

Date: Y10 D280  Launch site: KSC  Launch vehicle: Phoenix IIF  Crew: - - -

Spoiler

The existence of Dres is highly contested among astronomers and scientists. To settle the argument once and for all, the UAA has decided to send a probe to the alleged planet. Lifting off on a Phoenix IIF, Vanguard 2 is identical to the probe sent to Duna, only with an additional transfer stage bolted on.

Just when the payload is released in Kerbin orbit, the mission is cancelled. Two reasons are given for this sudden decision. First, there seems to have been a miscalculation in regards to the transfer window. Vanguard 2 was launched to late and thus lacks the necessary fuel to take it to Dres. Second, and more important, the antenna used on the probe is not powerful enough to provide adequate communication. This was discovered when contact was lost with Vanguard 1 minutes after the current launch. The UAA assures the public that Dres is still a real planet and that this is in no way a cover up of the truth. Vanguard 2 is left in orbit as a spy satellite for possible future use.

 

Echo Mun-A/B/Min-A/B

Place new relay satellites in polar orbits around the Mun and Minmus.

Date: Y10 D309/318/336/369  Launch site: KSC  Launch vehicle: Phoenix IIF  Crew: - - -

Spoiler

The old constellation of Echo satellites were hit hard by the Great Anomaly and need to be replaced. An updated version, built from resistant materials, has been developed and is now ready for deployment. The first is launched on day 309.

Echo Mun-A is placed in an eccentric orbit with its apoapsis above the Mun's north pole.

Three more launches complete the new network.

Echo Mun-B is placed opposite Mun-A, with its apoapsis over the south pole.

Min-A and Min-B take up similar positions at Minmus.

All four booster landings are successful.

With the new satellites operational, the old ones are deorbited. They will crash into their respective moons in a few days.

 

-- -- -- END OF MISSION LOG 036 -- -- --

Edited November 13, 2020 by SBKerman

[SBKerman]

Vanguard 1

Flyby of Duna.

Spoiler

Vanguard 1, still out of communication range, enters Duna's sphere of influence on day 337. It passes the red planet at a distance of 44,718,971 meters. A day later it returns to interplanetary space. While the main mission to orbit Duna and transmit science ended in failure, Vanguard 1 has proven that the UAA possess the capability to launch probes to other planets.

 

Dauntless 17

Expedition Harmony 10.

Date: Y10 D395  Launch site: KSC  Launch vehicle: Phoenix IIC  Crew: P1 Eilbin, E2 Seewin, S1 Aldkin, S1 Beasen

Spoiler

After beeing delayed a few weeks while mission control was busy with the Echo satellites, Dauntless 17 finally launches the next expedition to Harmony. Eilbin, Seewin, Aldkin and Beasen will relieve the current crew who have been on the station since the latter half of year eight.

After the handover cermony, Valentina, Siesen, Eiller and Kirfal board Dauntless 15. They undock and begin their return home.

Splashdown occurs a few hours later to great fanfare. The returning kerbonauts have spent 895 days in space, made nine spacewalks, seen two modules and a docking node added to the station, and hosted three visiting crews. Through their long mission, they have shown that it is possible to live and work in space for extended periods. This is an important stepping stone to interplanetary flights.

 

Keystone 21

Deliver supplies to Serenity station.

Date: Y10 D404  Launch site: KSC  Launch vehicle: Phoenix IID  Crew: - - -

Spoiler

Keystone 21 is launched on a Phoenix IID and placed in a parking orbit around Kerbin.

Thanks to the switch of rocket from Icarus to Phoenix, the spacecraft can be launched with full fuel tanks and a dedicated transfer stage. This stage sends Keystone 1 towards Minmus.

It also performs the capture burn before being jettisoned on a trajectory to impact the small moon. This avoids the problem of accidentally leaving debris in hard to reach orbits.

Keystone 21 arrives at Serenity shortly thereafter, bringing much needed supplies to the station.

 

Tranquility Station Ops

Install experiments and boost the station's orbit.

Spoiler

The last few days of year ten see some activity at Tranquility station. During a brief EVA, Madming attaches some experiments to the exterior from which Dunrie collects preliminary data. This data is stored aboard Explorer 1. The lander is scheduled to make a trip to Harmony station in low Kerbin orbit early next year and will bring science from the Mun to be processed in Harmony's lab.

A few days later, Explorer 1 is used to boost the station's orbit which has decayed over time.

 

-- -- -- END OF MISSION LOG 037 -- -- --

Edited October 27, 2020 by SBKerman