ncw33 Posted May 14, 2023 Share Posted May 14, 2023 Hi, I've noticed an issue when using the TOOB tubing. Title: It seems that the upper attachment node of the TOOB has the wrong dimension Specs: not relevant (probably), but anyway... Intel i5-13500, Windows 11 Pro (22H2 release), Radeon 6700 XT Severity: Med/Low Frequency: High, 100% repro Description: I made the following craft: Mk1-3 Gumball X200-16 tank MEM-250 medium engine plate attached directly to engine plate: Poodle attached to the engine plate's "floating" node: TOOB-375 (L) tube - rotated 180deg, so that the floating node of the TOOB is down. I had to use WASD to rotate the TOOB, so that its ring was at the top. attached to the TOOB's "floating" node: Lg fuel tank The intention with this craft is to make something Apollo-style, with a nice big payload bay underneath the Poodle, for storing a lander (mounted to Poodle with decoupler). Expected: the MEM-250's integrated fairing extends at an angle nicely down to the TOOB, which extends straight down nicely to the LG fuel tank underneath it. Actual: The MEM-250's integrated fairing extends out to an XL diameter, rather than the TOOB-375's actual LG diameter. Is this just a typo in the part file for the TOOB? Link to comment Share on other sites More sharing options...
Recommended Posts