Jump to content

JNSQ: The Last Munflight - Chapter 6


Recommended Posts

I’ve seen a few alternate history mission reports lately, and they’re fun to read. Stories like Kānāwai: Ares to Mars and A DIRECT Transition – If DIRECT Took To The Skies. They inspired me to write an alt history report of my own. But rather than tread on alternate Earth history, I wanted to explore an alternate history from my own JNSQ mission reports- and do it in a way that didn’t involve time travel or some other science fiction trope (ok, maybe a little).

Looking through my To the Mün mission reports (To the Mün, Shuttle Launch System, Commercial Space Ventures, Flight of the Endeavor), I found the perfect Point of Departure in my timeline:

gFe7LiV.jpg

At one point, I seriously considered basing my Shuttle Era on a “what if” picture that I found where the vonBraun Ferry Rocket was perched atop a Saturn V. Then @benjee10 released his outstanding Shuttle Orbiter Construction Kit, and @Invaderchaos released SOCK Recolored , and I absolutely had to use it for my Shuttle Launch System mission report. But what if I hadn’t gone that route?

This mission report is an opportunity for me to explore that “what if” scenario while still advancing my main timeline. Since this mission report happens in two saves, I plan to mark the alternate history sections with “ALT” for Alternate Timeline. Hopefully that’ll avoid confusion; this is a new format for me so please bear with me.

Chapters

Prologue

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

---

Mod list

vF2SF2u.png

A mapping of months

Listed below are the names of the 12 months in my save, mapped to the Gregorian calendar months:

Acama                  January
Huitzil                    February
Chimal                  March
Itzcoatl                 April
Moctez                 May
Axaya                    June
Jool                        July
Tizoc                      August
Ahuit                     September
Cuitla                     October
Cuahoc                 November
Montezu             December

Link to comment
Share on other sites

Prologue

D4jKYwq.png

5fmzCdk.png

lOIMTr0.png

C5hnWdZ.png

To The Mün had been an expression among kerbals to describe something impossible until two nations, the Kerman States and the vonKerman Republic, landed on both of Kerbin’s müns. After that feat, nothing seemed impossible. The Kerman States- via their Kerbal Space Program- set their sights on a kermanned mission to Duna, but they knew it would be expensive, so they created the reusable Shuttle Launch System to replace their expendable rockets. Then they partnered with the mcKerman Kingdom’s Ministry of Space to build Starlab, their Kerbin Orbiting Station. With their reusable infrastructure in place, the two nations began planning for their trip to Duna. Then the Laythe Surveyor sent back some intriguing results about Jool’s innermost mün…

8VFqBW2.png

D2WcPO1.png

lTKs2Q0.png

The space agencies immediately pivoted away from Duna and created Project Laythe, seceding cisminmar space to commercial companies such as Orbital Dynamics, who single-handedly created the space tourism industry, built the first fully reusable, single-stage-to-orbit launch vehicle, and became the first company to capture an asteroid, dubbed the “Magic Boulder” for its exotic resource. Meanwhile, KSP and the MoS invited the vonKermans to participate in Project Laythe, and the three agencies collaborated to build the First Jool Fleet.

o5VnJRP.jpg

5v38NCY.jpg

lCXYWEP.jpg

Among the many vessels in the Fleet, Nautilus, the first Deep Space Exploration Vessel, brought eight astronauts and kerbonauts to Jool’s innermost mün. After assembling Laythe Base from a collection of modules shipped with the Fleet, the crew spent sixty days on the surface conducting experiments- and discovering phytoplankton in Laythe’s oceans! With their exciting discovery making news, the crew returned to the Nautilus to spend another three years in cryostasis traveling home.

oVnlhll.png

EnSfZbn.png

BzG72it.png

As the Nautilus (DSEV-01) coasted back towards Kerbin, the Ministry of Space spearheaded a renewed effort to reach Duna and provided most of the funding for the budget conscious Kopernicus (DSEV-02) and the Third Duna Fleet.

geJc4gP.png

After a disastrous landing that caused the death of Ribler Kerman, seven kerbals explored the Rusty Planet- and made some amazing discoveries along the way. Most importantly, they discovered that ancient Kermantians somehow visited Duna thousands of years before modern kerbals- and seemingly without advanced technology! That discovery inspired the spacefaring nations to form the International Space Consortium and unite under one banner to explore the solar system and look for more signs of Kermantian visitations.

GGFSgv7.png

sl3suOC.png

l0aFtbD.png

And with their mission complete, the crew boarded the Endeavour- a makeshift rocket that they cobbled together from salvaged parts- and returned to DSEV-02.

ktb6fTa.png

diV4ULj.jpg

UwAgdat.jpg

When the launch windows opened once more, Discovery (DSEV-03) – a next-generation spacecraft that emerged from the Deep Space Exploration Vessel (Experimental) program- launched towards Jool. Meanwhile, Kopernicus (DSEV-02) coasted towards home and DSEV-04, slated for Duna, neared completion. DSEV-04- as well as DSEV-03 and Newton (DSX-01)- were powered by a revolutionary gravitic propulsion system created by Orbital Dynamics that changed the nature of spaceflight forever. Though the technology was still in its infancy- and rather expensive- gravitic propulsion stood ready to take over from chemical and nuclear rocket technology- if a steady supply of the exotic matter, known as graviolium, could be found beyond the deposit from the Magic Boulder…

Without a doubt, commercial space companies made huge advancements in spaceflight and propelled kerbalkin closer to the stars.

But not all commercial space companies enjoyed fruitful success…

Jf7ycaq.jpg

“…And so, with a heavy heart, I must regretfully announce that Phoenix Aerospace will cease operations… and let the staff go…” Phil Kerman, CEO of Phoenix Aerospace somberly said.

fx1PgQV.jpg

His staff smiled but he could see the micro-expressions on their faces. The micro-expressions of his soon to be former employees mirrored his own sadness. Starlab’s retirement also meant the conclusion of their Kerbin Orbital Transportation Services contract, which reduced their revenue significantly.

Dlb5k9e.jpg

Worse, KSP declined to buy more Power and Propulsion Element spacecraft or Refueling Modules for Gateway Station.

AVmJf2E.png

xjQxKmh.png

He’d hoped that Phoenix Lab would serve as the cornerstone of tourist trips to the Mün, but thus far, the only customers were the ISC’s two prototype Deep Space Exploration Vessels. It was, unfortunately, a matter of time before Phoenix Aerospace ran out of money.

And that time was soon.

ZcTCGDm.jpg

Phil sighed, letting the news sink in before continuing. “But we’re going out with one last hurrah.” He paused again, and his employees were on the edges of their seats. “We’re going to reenact a Münflight...” The crowd cheered for several minutes. When they settled down, Phil continued.

“Before the Board of Directors made their decision, we were planning to offer a Münflight experience to two paying tourists that captured the nostalgia of the first flights to the müns. We can’t perform an exact reenactment, of course, since today’s technology is much more advanced than what the first astronauts had, and some key hardware no longer exists, and we don’t have a heavy lift rocket, but our Firebirds are the grandchildren of the K-20, and like their grandparents, they can go to the müns and back. Now, here’s what we’re going to do…”

Link to comment
Share on other sites

Chapter 1

8rc413S.jpg

WG0qpfI.jpg

OBVHz91.jpg

nVt2uuG.jpg

The timeline was tight, but they’d done it. They completed the SCV Endeavour- DSEV-04- in time for the upcoming Duna launch window. Named in honor of the homebuilt rocket that the astronauts on Duna built- out of salvaged parts no less- to replace the flawed and broken Estonian lander that cost them their mission commander, the name “Endeavour” was unanimously chosen by the ISC’s DSEV Naming Committee. Though the crew of the Kopernicus wouldn’t get to see Endeavour launch due their being in cryosleep and still coasting home, the ISC knew that they’d be happy to know that the newest DSEV was named in honor of their homebuilt ship.

7Wv9Aki.jpg

Like the SCV Discovery before her, the Space Consortium Vessel Endeavour was a Discovery-class Deep Space Exploration Vessel that incorporated the latest technology; things like a shipyard-configurable modular construction and revolutionary graviolium-fueled gravitic engines. She used the same modules as Discovery, including the hab ring, a liquids container module filled with propellium, and of course the gravitic propulsion system. But her command hull benefited from lessons learned from building Discovery- the “neck” of the hull, to which other spinal modules are attached, had a pair of staterooms mounted above and below the connector for the ship’s captain and executive officer to occupy. Given the tight quarters, the staterooms were a welcome addition.

The ISC also leveraged the Discovery-class’s modular mission system for Endeavour’s maiden flight. While Discovery had an inline hangar dedicated to transporting two Shuttlepods to Laythe along with a Type 1 Cargo Rack to bring two large Drop Pods and a space station, Endeavour had less hardware to haul. As a result, shipwrights fitted a new Inline Spacer Tank instead of a Shuttlepod Hangar and attached two Radial Shuttlepod Hangars to its flanks. They also omitted the Type 1 Cargo Rack. The design gave a more fashionable, proto-battlestar look offered a more compact layout than Discovery and gave the ISC the opportunity to test different configurations for their modular DSEV spacecraft. And for this mission, the Spacer Tank’s dorsal and ventral docking ports sported an expansion to Duna Basecamp.

skMYAEd.png

The crew arrived at Magic Boulder Shipyard two weeks before the Duna launch window opened, checked out their new ship, and thanked the yard workers for all their hard work.

DWKh0TZ.png

2dg0vM6.jpg

Right on time, they departed the station, performed their “burn” for Duna (gravitic engines don’t throw flame out the back, but traditional terminology dies hard…), and bed down into cryosleep for the long journey to the Rusty Planet. With two Discovery-class ships in flight, the ISC eagerly waited to evaluate their performance before they began to build the next two…

fXoz269.jpg
Link to comment
Share on other sites

Chapter Deux - When We Left Kerbin: Fate of The Atantis

Major Kelbin Kerman, Kerman Air Force, woke up. It took him several minutes for him to figure out why he was so cold, and where he was- and for that matter, who he was. Kelbin was captain of the Atlantis, DSEV-05. He and his crew had left Kerbin. For the past several years, he'd been in cryosleep while his ship coasted towards Jool. He vaguely recalled that some time ago, the exploration team on Duna discovered a Face that clearly resembled a kerbal, and that it emitted  a powerful radio transmission aimed straight at Jool. That's why KSP built Atlantis- to find out why that signal was sent. But wow, what a dream! It was like the other monolith dreams- very vivid and indistinguishable from realty, like he was living in another Superimposed Alternate Variant Existence. But there was no monolith in deep space for him to communicate with. Still, in his dream, he saw kerbals flying winged spacecraft To the Mun, then they built a space shuttle, and then he saw himself as the CEO of a commercial space company. He couldn't imagine winning the lottery, let alone starting a space company with the winnings...

Kelbin looked around, realizing that there was some kind of noise going on. Apparently, it was an urgent noise. There was a voice speaking. It sounded... metallic, robotic- urgent.

"...imminent," the voice said loudly as the klaxons wailed. It was giving him a headache.

Kelbin wondered what the urgent robot voice meant by imminent.

"Terrain, terrain," the robot voice said insistently, "pull up, pull up! Collision imminent!"

Kelbin listened to the words again, and groggily climbed out of his revere. His head was still foggy though. Apparently, the ship was about to hit some terrain? He wondered how since Atlantis was a space ship, a Deep Space Exploration Vessel.

He made his way to the bridge of the ship to look around and see what "terrain" they were about to run into out in deep space. Kelbin got into the command chair out of habit and checked his displays. "Ha," he said, looking at the displays, "false alarm. There's no terrain! Now, what would set off the alarm?"

pcnBK9c.png

Kelbin looked out the window, but only saw the blackness of space. Granted, the ship had a greenish glow about it, but still, just black space out the windows.

ZZos94Q.png

He rolled the the ship ninety degrees, and the green glow got brighter.

EJIiLN6.png

"Hm, he said simply. Then he looked at the orbit and saw the problem. "Oh... Ok, I just need to fire up the engines and correct the orbit."

There was, unfortunately, a slight problem with that. For some reaosn, flight computer had jettisoned the ship's supply of explodium, the unstable nuclear salt water that powered Atlantis' rockets. He wondered for a few moments what would cause the computer to jettison the explodium. It was stored in a state that was almost supercritical, maybe that was it? The ship hit Jool's upper atmosphere and screamed in protest as pieces of the ship ripped away.

"Well, this sucks," was the last thing that Major Kelbin Kerman, Kerman Air Force ever said.

oWK7xjA.png

lAfTNIh.png

gWzYOZk.png

jtoODFD.png

NsIcR6N.png

NhU2Yf8.png

+++

Happy April 1st! :)

My savegame file for When We Left Kerbin is no more, but I played it in an old version of KSP 1 anyway. But I wondered what would've happened to the Atlantis once it reached Jool, and...

Link to comment
Share on other sites

  • 2 weeks later...

Chapter 2

6zNk2Vz.png

Karbal Kerman, space news correspondent for Kerbal News Network, just finished covering Phoenix Aerospace’s Münflight announcement. It was an intriguing idea to capture the nostalgia of the early days of spaceflight! He looked forward to covering it as the announcement became reality.

k7yzBbc.png

For now, though, he had to finish editing his exposé on the political corruption that happened over fifteen years ago when KSP was making their Shuttle Decision. His research showed that Drax Aerospace influenced members of Kongress to choose the Drax Shuttle Launch System over the Lindor Shuttle, a competing design.

DsgU1xT.png

NxtCT7s.png

JbTZ1Xf.png

R1PuBVs.png

Correction, make that two competing designs. The Kerman Air Force proposed a smaller orbiter- their first Blackstar proposal- that launched on a piloted and winged version of the Lindor L-1C first-stage booster. The winged booster was supposed to provide almost all the velocity needed to reach orbit and then detach the orbiter. The orbiter would finish attaining orbit while the booster reentered the atmosphere and landed at a convenient airbase. It was one of the first fully reusable shuttle designs- except it didn’t work. The booster wouldn’t survive reentry heating due to the technology of the day, and any kind of additional heat shielding would’ve made the booster infeasible.

But that got Karbal thinking… What if the Lindor Shuttle became SLS instead of Drax’s Shuttle? How would history have played out?

Karbal took some notes, checked some of his old files, took some more notes, drafted an outline, and before he realized it, it was morning already. He realized that he had something that the alternate history buffs would love to read, so Karbal slept a few hours, created a pen name, and began writing…

*

(ALT) Keep Looking Up Part 1: The Shuttle Decision

QHVwrC3.jpg

Jool 31, 1991: The Space Shuttle Mariner was poised on Pad A at the Kerman Space Center, ready to launch for the very first time. Four years ago, Kongress approved the Shuttle Launch System, just as it happened in our timeline. But in this alternate timeline, things are different. After the renowned investigative journalist Karl Kerman published an award-winning article on Drax Aerospace’s efforts to illegally influence Kongress’ decision, they immediately rejected Drax’s Shuttle proposal in favor of the Lindor Shuttle- and the Drax executives landed in jail.

5sVFN0o.png

John Kerman, veteran of eight K-20 KerbalSoar flights- including one to each of Kerbin’s müns- was the Kerman States’ most experienced astronaut and was the command pilot of the first Shuttle flight. Joining him was rookie astronaut Roberta Kerman, one of the first of a new class of Shuttle astronauts. John looked out of Mariner’s windows and silently thought about how much the space center had changed. Given how long it took to process a Lindor launch vehicle, KSP added Pad B and Pad C along with another Vehicle Assembly Building to handle the expected workload.

Off in the distance, he could also see Pad Alpha, built to handle Kerman Air Force K-20s that began polar flights to Dolores Air Force Station after Münflight 3. He knew that the KAF Skyhawk, sitting in its VAB, was fully stacked on its Edna booster and ready to fly in case Mariner experienced a malfunction in orbit and her crew needed rescue. But once the Shuttle began flying with its full crew of four, the K-20 could no longer rescue a stranded Shuttle’s astronauts. And once Shuttle became fully operational, the Air Force intended to retire their fleet of K-20s in favor of the larger and more capable vehicle. In fact, by consolidating all missions on the Shuttle, redundant architectures like the K-20 and its Edna launch vehicle, and all their support facilities, could be eliminated to save costs- and to justify the high flight rates needed to keep Shuttle costs low.

DeFxUQH.jpg

YjiwJnV.jpg

Three seconds before launch, the first stage’s Kerbodyne KE-1 Mastodon engines roared into life and quickly built-up full thrust. The Lindor struggled to be free, and right on time, explosive bolts in hold-down posts detonated, granting the giant rocket’s wish. Simultaneously, the three service masts on the launch tower quickly scurried out of the way to ensure that the Lindor could rocket into the sky unopposed.

9N11sFQ.png

Yp3qEyL.png

At nearly 500,000 Funds per flight, it was hard to justify the throwaway Lindor 5. Fortunately, engineers had previously experimented with a solution when KSP launched Skybase into orbit- an experiment that proved to be a success. They built the Lindor L-9R- the official name for the heavily modified Lindor 9 Reusable First Stage Booster. Based on the venerable L-1C first stage that sent a total of six missions to the Mün and Minmus, the L9-R had nine Kerbodyne KE-1 Mastodon engines (The L-1C had five, plus two more that powered expendable boosters) and a stretched fuel tank.

uaUS6bD.png

4lrWepw.png

1 minute and 26 seconds after liftoff, at an altitude of 28 km and traveling 948.3 meters per second, the L-9R completed its burn. Mariner’s flight computers then commanded the first stage to separate from the rest of the vehicle, and stack decouplers and separatron solid rocket motors got to work rapidly putting distance between the spent booster and the rest of the rocket. Two seconds later, the five RE-I5 Skipper engines powering the L-2 second stage ignited, and the Lindor Shuttle continued her climb.

As with its L-1C predecessor, the L-9R separated from the stack at a relatively low altitude and speed, and that translated to experiencing less atmospheric heating than other proposed reusable Shuttle designs. As a result, the first stage coasted another 32 km higher before unlocking its propellant reserves and making an engine burn in preparation for its next phase of operations.

Thanks to a technology transfer agreement with the vonKerman Republic, the L-9R was equipped with “grid fins” that helped steer the stage towards its landing zone on Welcome Island. Coupled with four deployable landing legs that were up-sized versions from the vonKerman’s recoverable boosters, the L-9R could land safely, be refurbished, and fly again. For Mariner’s first flight, the Lindor vehicle stack used the same L-9R that launched Skybase into orbit, albeit refurbished and modified to apply lessons learned from its first flight. But once again, the reusable booster proved its worth and landed safely. And given its cost savings, KSP was already in the process of building three more reusable first stage boosters.

vriQkYU.png

B9vEdMn.png

7 minutes and 42 seconds after launch, the Lindor Shuttle’s L-2 second stage completed its duties and separated from Mariner, leaving the orbiter to circularize its orbit. The L-2 stage remained unchanged since the days of launching K-20s with their D1B upper stages into orbit. It represented dependability and reliability. Unfortunately, the legacy hardware also represented the greatest expenditure of the Lindor Shuttle.

Unlike the first stage, the second stage, coasting 150 km above the surface and traveling at 3,675.1 meters per second, was traveling too high and too fast to safely reenter the atmosphere. So, while Mariner completed its circularization burn via its single Skipper engine, the L-2 stage burned up eight and a half minutes later. But engineers had to wonder- could it too be recovered?

VF9uK9G.jpg

rauLIeS.png

John and Roberta breathed a sigh of relief and congratulated each other (even though the flight computers did all the work)- they were in orbit! With the launch completed, they got to work transforming the vehicle into on-orbit mode. They started by opening the payload bay doors, turning on the bay lights, and extending the high-gain antenna. Like Pathfinder- the first K-20 KerbalSoar- the Lindor Shuttle had payload bay doors, but unlike its predecessors, which replaced the bay with a crew cabin on subsequent K-20s, Mariner’s payload bay was a permanent addition. The size of the payload bay- and thus, the overall size of the shuttle, was dictated by Kerman Air Force requirements. Simply put, they wanted the ability to launch their large, “classified payloads” (we all know that they’re spy satellites) into orbit and to retrieve them for servicing as needed.

Dzjv5Mk.jpg

In their competing Blackstar orbiter proposal, the Air Force designed a bay that could handle payloads up to 7.5m long and 1.875m in diameter. Realizing that they needed as many Shuttle flights as possible to keep costs down, KSP’s design met those requirements and even exceeded them. The Lindor Shuttle had a bay that could fit cargo up to 2.5m in diameter and had an airlock and docking equipment while still having plenty of room left over for the Air Force’s classified payloads. The payload bay was more than enough to handle KSP’s payload requirements- especially since the Lindor itself could still launch what they had in mind.

K9DDe2C.png

iPoBPrR.png

fsHSjhO.png

zoHLnfp.png

Even on her maiden flight, Mariner was put to work. With a series of carefully timed engine burns, John piloted Mariner over to Skybase for a fly-around to check on the station’s status. A year ago, a trio of his fellow astronauts departed the station on Sojourner, the last operational civilian K-20 that made its final flight. Since the K-20 was designed with the Mk 1 Clamp-O-Tron Junior docking port and Shuttle used the larger Mk2 port- another gift from the vonKermans, and one that ensured that all spacecraft could dock together regardless of origin- Shuttles visiting Skybase needed an adapter. Fortunately, Mariner carried one. After John finished his fly-around, Roberta got to work.

CtRIbnN.png

Nestled in Mariner’s payload bay was the Docking Adapter Module, a specialized component that KSP engineers built based on the venerable Mark One Laboratory Module. The DAM had both types of docking ports at each end of the module. But more than just a docking adapter, the DAM was a dedicated prototype greenhouse capable of growing food for the astronauts. KSP hoped to demonstrate that with the right edible plants that could also renew the air supply, spacecraft could carry fewer supplies for long-duration missions.

Attached to the Mk2 port was Mariner’s other primary payload: the Teleoperated Maneuvering Vehicle. Tested last year via an Edna launch, engineers designed the TMV to maneuver hardware in space and position it for assembly. The first TMV had issues with receiving ground commands, but a thorough check of its software resolved the bugs, and this time, Roberta piloted the craft from a console in Mariner’s cockpit. After performing pre-flight checks and unlocking the propellant flow valves, Roberta fired the explosive bolts holding the DAM and TMV in Mariner’s payload bay, and the Shuttle’s first cargo took flight.

jyXzppi.png

With practiced precision, Roberta maneuvered the TMV out of Mariner’s payload bay and slowly piloted it over Skybase. She lined up the Mk 1 docking ports and slowly approached the space station. A few meters before docking, she rotated the TMV to line it and the DAM up with Skybase’s orientation. The DAM docked with the windmill-like station with a satisfying clunk.

“Excellent job, Mariner,” Mission Control called out from the radio. “Seals look good. You’re go for TMV undocking and transpositioning.”

“Roger that,” Roberta responded. Her hands played across her console, and the TMV separated from the Docking Adapter Module.  As the constellation of spacecraft approached Kerbin’s nightside, the rookie astronaut piloted the TMV back into Mariner’s payload bay and docked with the aft docking port. She made it look easy.

LWk0MSx.jpg

As she locked the TMV’s propellant tanks, John initiated the next phase of the mission. He expertly oriented Mariner to line up its docking port with the newly vacated port on the DAM. With precision movements and patience, Mariner’s docking port lined up with the DAM, and John nudged the orbiter “up” to dock. And just like that, the airliner-sized Shuttle, longer than Skybase, docked with the station.

Lv8gEys.jpg

9ISxpyT.png

The astronauts secured Mariner and then transferred to the DAM’s greenhouse. After turning on the lights and opening the shutters, they took a break. That’s when things started to go wrong. Skybase started to tumble in space! The structure groaned and flexed at the two docked Clamp-O-Tron Jr ports as Mariner and Skybase fought for control over which set of gyros would orient the station in space. The astronauts quickly evacuated back to the shuttle while Mission Control went through their emergency procedures for Skybase. Together, both station and shuttle switched off their gyro systems, allowing the complex to slowly stop oscillating.

A root cause analysis session later determined that both Skybase’s and Mariner’s flight control computers decided that they were responsible for orienting the complex and sent commands to their respective gyro systems. Because of their positions relative to the center of mass, the complex began to flex- almost to the breaking point of the DAM/Skybase docking interface. Disabling both primary gyro systems resolved the issue.

YG9wr5L.png

By activating the backup gyros in Skybase’s logistics module- which were not as powerful and were closer to the center of mass- Mission Control stopped the flexing and got the station reoriented properly. But lesson learned; orbiters must relinquish control to the station when they visit, and the station needed to use the gyros closest to center of mass for orientation. And as part of the mitigation efforts, KSP came up with a “Naming Priority” system to help determine which spacecraft should have control at any given time.

VtBEnva.png

uEtfa1b.png

With the situation under control, John and Roberta went back to the greenhouse to continue their work. Currently configured as a botany lab, the module had numerous sensors to monitor plant growth in microgravity. The results of the experiments would enable future crews to reconfigure the lab into a greenhouse, but for now, John and Roberta were satisfied that after hooking up all the tubes, power cords, and sensors, there were no issues when the finally turned the whole thing on.

Next, the astronauts double-checked the seals between the DAM and Skybase before entering the station. They noted some buckling in the metal transfer tunnel, but they verified that there were no air leaks. Nonetheless, Mission Control made a note to bring up some struts to reinforce the connection between the DAM and Skybase. John opened the hatch, and the two made their way into Skybase’s logistics and airlock modules. After performing their checks and not noticing anything out of the ordinary, John and Roberta transferred fresh EVA equipment and repair kits to the logistics hub.

1lLalwG.png

CfCELnW.png

The final stop of their tour was the orbital workshop proper- the converted D1B upper stage. Roberta noted an odd smell that turned out to be an out-gassing of various plastic components that were repeatedly exposed to heating and cooling. Mission Control took note to send up more air filters along with fresh supplies of Snacks, fresh air, minerite, and other items. Skybase also needed four Refit Kits to set up the machinery needed for its next phase of operations. But that would have to wait for another flight. For now, John and Roberta were content to complete assessing the state of Skybase and noting what needed updates and repairs.

j9fa7k5.png

GeutOcV.png

The astronauts returned to Mariner, and over the next two days, they conducted tests and evaluated its on-orbit performance. They found that the orbiter performed remarkably well thanks to the experiences gained from flying the K-20 KerbalSoar. They particularly liked using the TMV to maneuver payloads in space- no clunky robot arm needed! But their time at the station had to end, so John and Roberta boarded Mariner, undocked, and put some distance between themselves and Skybase for their trip home.

CNtsTvO.png

Q9Vq4An.jpg

UDrUxwC.jpg

Forty-four minutes later, Mariner performed her deorbit burn and eleven minutes after that, she hit the upper atmosphere. As with the K-20, the Shuttle aimed for an impact point a few hundred kilometers short of KSC, and then pitched upwards enough to both glide to the space center and slow down. It was both an art and a science to slow down right above the space center, but unlike its predecessor, Shuttle had jet engines to ensure a safe return. So, it came as no surprise when Mariner overshot the space center by 37 kilometers, and John had to light the jet engines and turn the ship around.

rFkuVev.jpg

7cEKL93.png

1Lt5v9N.png

RXetxDD.png

“We heard some bangs and shimmies on the way down,” John remarked. “It sounded like something went boom,” he said calmly, as if reporting the weather. He set Mariner down on the runway with barely any concern, and then taxied over to the spaceplane hangar and stopped just outside of the structure. Once the pair shut down the orbiter’s systems, they deplaned and stood outside for a publicity photo. The first flight of the new Shuttle was a success!

Well, almost a success. Engineers examined the spacecraft to find out what the “bangs and shimmies” were. As it turns out, they were the result of the wingtip RCS thrusters sheering off from the extreme heat and pressure of atmospheric re-entry. They’d have to be redesigned for the next flight...

Link to comment
Share on other sites

  • 3 weeks later...

Chapter 3

Karbal felt the familiar rush of creativity pouring in once more, bolstered by the positive feedback that he got from posting his story on alt.spacehistory.com. “MOAR boosters,” read one comment. That was a common way on the boards to signify that readers wanted more alt history space posts. Another comment read: “How ironic that IOTL-“ IOTL meant In Our Time Line- “the reusable Lindor L-9R was only used once when it launched Skybase.”

Several posts from various forum users posted walls of text discussing technical aspects of the Lindor launch vehicle, the Lindor Shuttle, and so on. Karbal saw them as posters that wanted to appear “in the know” and as attempts to get readers to look to themselves as the experts on all things regarding space technology and history. Karbal just saw them as distractions to the story that he was writing. But a post by one user named “KSP Insider” stood out. It read, “Good technical accuracy. Your story is plausible. We were working on a reusable L-2 stage design before the budget ran out. We also had several applications lined up that would’ve needed Lindor. Keep up the good work.”

A reusable Lindor second stage? More “applications” for Lindor? Interesting, Karbal thought to himself. He noticed that “KSP Insider” didn’t provide any technical details, almost as if the poster challenged him to find out more.

“Challenge accepted,” Karbal said to himself. He’d do some digging. In the meantime, he began writing…

(ALT) Keep Looking Up Part 2: Skybase Service Life Extension Program (SLEP)

7kJZRD4.png

B43rXtD.png

Despite the minor damage suffered during re-entry, Mariner proved capable of launching, orbiting, and landing back at KSC, just like her K-20 ancestor. Now she had to prove her reusability. OV-201 went back into the Orbiter Processing Facility for repairs and extended inspections, and engineers estimated that it would take up to 120 days to complete. Given the time required, Skyhawk stood down from her Shuttle rescue role and geared up for her next Air Force mission.

lIrANpM.png

2GiwKuK.png

Just past sunrise on Tizoc 5, 1991, Skyhawk (OV-106) blasted off into polar orbit atop an Edna Heavy rocket for a 30-day mission to Dolores Air Force Station.

kS0ujK5.png

gLiJ4u0.png

Da4Yzgy.png

F2sViGO.png

ki4x3Dw.png

Qlzbwrg.png

4PzB6wR.png

Four years ago, Air Force blasted Dolores into polar orbit at about the same time that KSP lofted Skybase. It took four Edna Heavy launches to place the core module, the Habitat Module, the Lab Module, and the DenEye Spy Module into orbit and connect them together 150 km above Kerbin. Over the years, Skyhawk and Corsair (OV-107) delivered 48 kerbals over 16 flights to the station to conduct military experiments and “Watch Kerbin” with their ground-pointing telescope, and the latest flight was no different.

CjIAtnu.png

Though technically an Air Force station, the Kerman Navy also used the facility as well. This flight was an all-Navy crew- Captain Jonathan “Archer” Kerman (PLT), Commander Charles “Tripp” Kerman (ENG), and Doctor Phlox Kerman (SCI) rocketed towards the station and docked with it a half-day later. For their first task, “Tripp” performed an EVA to replace the aging struts connecting the three mission modules to the core. The struts ensured that the structures didn’t flex and cause problems like the issues that Mariner and Skybase experienced. The other 28 days of their mission was routine. Dr. Phlox performed experiments including life sciences and monitoring Kerbin’s oceans for evidence of climate change.

xRMVxGV.png

TT1c6rD.png

a1S2x0T.png

LN29gHE.jpg

joF8Upw.jpg

After completing their mission, the trio boarded Skyhawk once more for the trip home, timing their departure to just before sunrise at KSC. Several minutes after its deorbit burn, OV-106 jettisoned its service module at let it burn up as the glider hit the atmosphere. A few S-turns later to slow down, Skyhawk went subsonic above KSC, approached the runway, and landed with little fanfare. OV-106 had a 30-day turnaround time, but that was plenty of time before Mariner’s next mission…

oxQFb7v.jpg

tQ9R4ds.png

8AynhrY.png

At last, 120 days after Mariner landed, she was stacked atop the Lindor L-9R and a new L-2 upper stage and ready for her next mission. For LSS-2 (Lindor Shuttle System, mission 2), Mariner carried a Mini Logistics Module with several Refit Kits, the Unity Node, and the refurbished Teleoperated Maneuvering Vehicle. For this flight, Janet Bragg-Kerman (PLT) and Archimedes “Archy” Kerman (ENG) rode in OV-201’s cockpit. Once again, Mariner launched towards Skybase, arriving 3 hours later.

BCoKTsd.png

NLxIN46.png

After parking Mariner next to Skybase, Janet unlocked the TMV’s propellant tanks, switched on the lights, and separated it, Unity Node, and the Mini Logistics Module from OV-201’s payload bay. As the orbiter’s autopilot handled station keeping, Janet maneuvered the payload over to Skybase. She expertly docked Unity Node to the adapter module, and then moved Mariner in to dock. With practiced skill, she docked the orbiter to the MLM’s aft port.

4316RrA.jpg

gPtVRyD.jpg

The two astronauts took their time securing the orbiter before transferring over to Skybase. Over the next five days, Archy and Janet worked hard to replace Skybase’s old equipment with the refit kits that they’d brought to the station. They removed the defunct science modules and replaced them with life support systems like a composter, soil dehydrator, and even a prototype OPAL processor that squeezed water out of rocks. With the internal refits completed, Archimedes stepped outside to attach struts between Skybase and the Docking Adapter Module. Once he completed that work, he moved to the DAM to attach struts between it and the Unity Node. With no more work, he went back inside Skybase.

yOnV3WT.png

NdnFKEY.jpg

4s1gNxB.jpg

The next day, Mariner undocked from Skybase and headed back to KSC, landing once again with melted wingtip RCS thrusters. LSS-2 was nearly flawless; everything went to plan except for the heat mitigation efforts for the RCS thrusters. The engineers went back to the drawing board.

if3okhM.png

kBZwu78.png

LCvF4F9.png

Meanwhile, leaving the MLM and TMV behind at Skybase was not an oversight. After Mariner landed, Mission Control remotely undocked the TMV from Unity Node, maneuvered it to the free end of the MLM, and docked again. Next, the TMV undocked from Skybase, taking the MLM with it. After putting some distance between it and the station, the TMV’s four LV-1R Spider motors ignited and lowered its orbit to intersect with the atmosphere. The deorbit test worked perfectly…

mS4UlY0.jpg

LSS-3 launched 95 days after Mariner landed from Pad B, and again had repairs for her damaged RCS thrusters. The engineers assured everyone that this time, they wouldn’t burn away. Mariner also lacked the small landing gear on the underside of her tail, which also burned away during the past two flights. Proper training ensured that pilots wouldn’t strike the tails during landing.

Bxb7Wlw.png

Mariner once again carried a Mini Logistics Module and a new Teleoperated Maneuvering Vehicle to replace the one deliberately deorbited for testing. In place of the Unity node, OV-201 carried a docking tunnel. As with the previous two flights, LSS-3 continued to refurbish Skybase as part of its Service Life Extension Program. By adding new modules, replacing old equipment, and resupplying various consumables, KSP intended to double its original five-year expected lifetime.

uuqaGxG.jpg

For this flight, Roberta Kerman- copilot on LSS-1, and rookie astronaut Sally Kerman (ENG), a new graduate of the Shuttle Class. Mariner’s ascent had some trouble as the orbiter skipped off the upper atmosphere during her launch into orbit, but thankfully Roberta was able to take over from the autopilot and correct their orbit. Nonetheless, Mariner rendezvoused with Skybase an hour after launch.

QxeaO7g.png

gFNUGSw.png

fma6ywM.jpg

iya6ut5.png

After putting the orbiter into station-keeping mode, Roberta undocked TMV 2 and the Docking Tunnel, and then translated the craft over to the orbiter’s docking port. After that, she undocked TMV-2 and parked on the MLM. Next, she took control of Mariner from the autopilot and docked the shuttle to Skybase.

yUcvIP4.png

yUcvIP4.png

rIMjlLN.png

Finally, she undocked the MLM/TMV-2 and translated it over to Unity Node’s forward docking port. With her work completed for now, she and Sally secured the orbiter and transferred to Skybase.

AXWr4Ua.png

nNtXJ64.jpg

MQ93bnN.png

Sally’s role in the mission took center stage at this point. She opened the transfer valves to shunt fresh air from the MLM while the two astronauts moved snacks and minerite from the MLM into Skybase. Once they finished with that work, they moved extra EVA gear into storage aboard the space station. On Flight Day 2, Sally stepped outside to remove the covers on Node 2 and attach a pair of Clamp-O-Tron Jr. ports to the exterior. Then she reduced part count cleaned up the launch lugs and other hardware that could potentially tear a spacesuit if it got caught on it. Finally, Sally attached a pair of struts to the new Docking Tunnel to provide additional stability.

O7gTv9Y.png

Flight Day 3 saw Sally assess what systems needed repairs- and quickly realized that she lacked the skills needed repair them. They’d have to be fixed on another flight. Meanwhile, Roberta undocked the MLM/TMV combo and parked the MLM in Mariner’s cargo bay before returning TMV-2 to Unity Node. With their on-orbit tasks completed, the two astronauts had some free time to enjoy the views.

GX4gjX0.png

JVPsmCy.png

On Flight Day 4, the crew woke up, returned to Mariner, and prepped the orbiter for landing before departing Skybase. The deorbit went as planned, but a navigation error caused Mariner to overshoot KSC by a wide margin and she had to divert to Welcome Island. CNG really needed to refine their deorbit maneuvers! At least this time, her RCS thrusters survived reentry. At any rate, the orbiter landed safely and ferried itself back to KSC after taking on some extra jet fuel…

K9TFbCJ.png

93D2nNS.png

Space Shuttle Mariner launched into orbit once more after 73 days of refurbishment and stacking with its Lindor launch vehicle. For this flight, John Kerman (PLT) and Archimedes Kerman (ENG) handled the mission’s tasks. On the fourth and final mission of the Skybase Service Life Extension Program, OV-201 brought the station’s new Power Module into orbit. Consisting of several battery sections, an auxiliary monopropellant power unit, two tank clusters of monopropellant, and a dual-axis solar array, the Power Module would significantly increase Skybase’s power supply once installed.

52NG1sr.jpg

2rgKX0N.png

1yYXhCX.png

After arriving at the station, over the course of three days, Archy took a spacewalk to perform repairs on Skybase, add some lights to the Docking Tunnel, and to retract two of the station’s “windmill” solar arrays to make room for the Power Module. With those tasks completed, the engineer retreated to the comfort of the station to prepare for the main event. Given the length of the module and the positioning of its docking ports, KSP needed a new way to deploy Mariner’s payload. For this mission, OV-201 carried a Payload Pivot that was designed to pivot the module out of the cargo bay far enough for the Teleoperated Maneuvering Vehicle to grab it.

eup1Dou.png

Once given the go ahead from Mission Control, Archy disconnected the payload struts and unlocked the Payload Pivot’s servomotor. Then, the Power Module majestically rotated up and away from Mariner’s cargo bay. Once fully extended, Archy locked the servomotor again for the next phase of operation.

Gi7FVPR.png

iStN86t.jpg

John took control over TMV-2, undocked it, and translated it over to the Power Module. After docking with the module, Archy undocked it from the Payload Pivot, and John flew the combo over to Unity Node’s dorsal docking port. As the orbiting complex reached orbital sundown, Archy stepped outside to add some struts to the new module and remove launch lugs. And once the complex emerged into sunlight once more, Archy deployed the station’s new solar arrays. At last, Skybase is able to generate electric charge from solar energy in all orientations.

xwdsDD3.jpg

mkC7ktf.jpg

On the fourth day, John took a spacewalk from Mariner’s payload bay airlock- the first time someone did so. John immediately got to work performing an EVA experiment- spinning a wingnut in space and observing the results. It was quite fun! After making his observations, he boarded the Kerbal Maneuvering Unit- KMU- and powered it up. Carried into orbit during LSS-1, the KMU was like a mini spacecraft capable of transporting a single kerbal around in space. With the right connection, it could also be used for construction purposes. For the test flight, John piloted the KMU over to the KMU docking port on the Docking Adapter Module. Once it successfully docked, John left the seat and used his jetpack to return to Mariner. When Mariner left, the KMU would remain docked to Skybase and be exposed to space to test the long-term exposure effects.

fuuAPvD.png

DTRhozt.png

On Flight Day 5, John and Archy boarded Mariner for the trip home. It was the first nighttime landing for a Shuttle. After four development missions, KSP declared the Lindor Shuttle System operational. She was cleared to carry a full crew, freeing the last of K-20 KerbalSoars to retire. Her first “working test flights” not only proved the Shuttle design, but they also extended the life of Skybase by at least another five years. But SLEP wouldn’t be the end of Skybase’s expansion.

..
Link to comment
Share on other sites

Chapter 4

IaPPXaL.jpg

Pathfinder, also known as OV-301, sat on the runway awaiting clearance to take off, and Drax Aerospace had a lot riding on Pathfinder’s next few test flights. In 64 days, Nautilus, the first Deep Space Exploration Vessel, would return to Kerbin. Drax had that much time to figure out the design issues before the International Space Consortium cancelled their contract to transport the crew of Nautilus back to Kerbin. They had a lot more riding on Pathfinder’s success; without a working orbiter, they’d lose the space tourism market to their competitors.

JPtSMJb.jpg

RFx3sxc.png

OV-301 accelerated down the runway and into the air, quickly gaining speed as she climbed. Her twin CR-24 Longbow ThermalJet engines, powered by the LV-N209 Prometheum engine’s nuclear reactor, were the most advanced- the only- nuclear thermal scramjet engines ever created. They were among the most advanced engines around, short of Orbital Dynamics’ gravitic propulsion technology. Both engine designs were the brainchild of Jadzia Drax Kerman, Drax Kerman’s daughter.

Jadzia’s mom wouldn’t let her father name his daughter after himself, so he compromised and provided her middle name. Jadzia grew up in her father’s shadow until she became a brilliant engineer in her own right. Then, while her father continued to take her for granted, her peers began to recognize and admire her skill, putting her on projects like the Sunraker. In fact, she designed Sunraker’s revolutionary J-61 “Starwasher” combined cycle scramjet engines, and they worked perfectly. After completing her work on Sunraker, she quietly began working on Pathfinder, the next-generation shuttle that used nuclear-powered engines. When Sunraker suffered a catastrophic failure, Jadzia’s dad gave her the green light to fully develop the new shuttle. And as his last act before being forced to resign as CEO of the company and being sent to prison, Drax convinced KSP to allow the aerospace company to use operate the nuclear engines.

Pathfinder derived its design from the OV-200-series Drax Space Shuttle instead of the newer Sunraker. But unlike the OV-200-series, Pathfinder needed no solid rocket boosters or external tank to achieve orbit thanks to its atomic rockets. The Longbows used nuclear heat from the Promethium to heat the atmosphere to generate thrust and sipped promethium to provide extra oomph.

XrMCDOM.png

GiLxiwC.png

6TzjUNl.png

At 15,000 meters, Pathfinder cleared Mach 3 and kept going. At 20,000 meters, she soared past mach 4.5 and continued accelerating, trailing fiery plasma behind her. At 30,000 meters, Pathfinder lit her LV-N209 Prometheum atomic rocket to provide the boost in the airless void where the Longbows couldn’t operate. Not long after, OV-301 achieved a 155km parking orbit.

The engines weren’t the source of Pathfinder’s troubles, the wings were. To achieve SSTO, Drax’s engineers ballooned out the orbiter’s wings to hold propellium. That created a more rounded shape on the underside of the orbiter. Between that and the canted stabilizers on the wingtips, the orbiter tended to roll during ascent. It took a lot of config file editing redesign of the actuators and flight control software updates to stop the rolling. It still had pitch issues that would require more config file editing software redesign as well. Unfortunately, it took real flight experience to figure that out, and the test pilots had a rough ride home.

cpUa74I.png

rw7OgcJ.jpg

cOUc19h.png

Unlike Sunraker though, Pathfinder had a proven heat shield that was a step beyond the OV-200 series. She’d have no trouble handling the heat. So, after three orbits, OV-301 performed a deorbit maneuver and caressed the upper atmosphere seven minutes later. On the way down, Pathfinder bucked in the airstream and the test pilots complained about it loudly. Secretly, though, they loved every minute of it. Despite the difficulties, Pathfinder landed safely back at KSC

*

6zNk2Vz.png

Watching Pathfinder’s flight on the news gave Karbal an idea. In his alternate history, the Kerman States centered their activities on the Lindor rocket and Lindor Shuttle while rejecting the Drax shuttle orbiter. But what if somebody else adopted the design? Karbal sipped his Starfunds koffee once again began to write…

(ALT) Keep Looking Up Part 3: Skybase International

Ejb3yQY.jpg

During the development flights, a K-20 remained on standby to rescue the Mariner’s crew and bring them home safely. With the Shuttle declared operational, the K-20s were freed up from that task. But rather than retire the last two civilian K-20s, KSP repurposed the KerbalSoars for a new role: interim lifeboat. The space agency wanted to move to a permanent presence in orbit but didn’t want to keep a Shuttle at the complex, so that required an alternate means to get home.

KSP decided that the K-20 technology was too old to handle long-term exposure to space so they needed a new design to serve as a lifeboat. That would take time to develop, however. In the meantime, the space agency modified Sojourner and Viking, the two most recent K-20s, to serve as interim lifeboats. One K-20 would stay at Skybase while the other underwent refurbishment for its next stay at the station. KSP had to rotate the lifeboat every 120 days, but it enabled the space agency to keep a crew at Skybase without a Shuttle.

b80Xc0k.png

UrEwG75.png

noS5dLU.png

So, once again Sojourner rocketed into orbit - though for the first time, without a crew aboard. For their role as interim lifeboats, KSP added automated autopilot systems that could handle the K-20 without a pilot. An earlier version of the autopilot operated the prototype K-20, Pathfinder, out to münar orbit and back, so the updated version only needed additional functions to dock with Skybase. A day after launch, Sojourner arrived at Skybase and docked with Unity node. After docking, Mission Control commanded Sojourner’s propellant and resource tanks to lock their transfer valves and directed its systems to hibernate until it was time to depart the station- ideally only when it was time to rotate back home…

fAnMB4m.jpg

LSS-5 launched soon after, carrying Skybase’s new Lab Module, a Payload Pivot, and a Pressurized Mating Adapter. The PMA enabled the Lab Module to reside at its temporary location on Unity Node’s starboard docking port. Mariner also carried a crew of four; Roberta Kerman (PLT), Gertrude Kerman (ENG), Samantha Kerman (SCI), and Leon vonKerman (SCI). Leon was the first vonKerman astronaut to fly on a Kerman States’ spacecraft and represented the next phase of cooperation between the Kerman States and the vonKerman Republic that started with the joint Kerman States/vonKerman Republic Münflight 6 mission.

WyBu22T.png

e6MQsWG.png

FpVW2JS.png

JfSpWMe.png

Mariner lifted off thanks to the new Lindor first stage, L-9R-2, the second reusable Lindor first stage, while L-9R-1 enjoyed additional downtime for maintenance. The new reusable first stage performed flawlessly and landed at Welcome Island without incident. Meanwhile, Mariner arrived at Skybase half a day later. After she docked, Gertrude, Samantha, and Leon boarded the station while Roberta unlatched the Lab Module from its tiedown struts and pivoted it in the payload bay. Then she undocked the TMV, maneuvered it into place, and released the Lab Module from the Payload Pivot. Finally, she used the TMV to dock the lab to Unity Node’s starboard docking port. Gertrude then stepped outside to attach some struts to the new module.

wtmw9SE.png

Once they finished their tasks, Roberta said goodbye to the new station crew and departed Skybase in Mariner. Once again, the orbiter landed at night…

5HMLwJC.jpg

As OV-201 underwent refurbishment for her next flight, KSC rolled out a new prototype: The L-2R reusable second stage. Based on the venerable L-2, the L-2R sported a new set of landing legs, parachutes, grid fins and RCS thrusters for steering, and most importantly, a prototype KR-2200C Tyrannosaurus aerospike engine. Unlike traditional bell nozzle rocket motors, the KR-2200C used a conic shape that was ringed by four dozen thruster nozzles. The atmosphere itself held the rocket exhaust to the conic walls of the engine, and it significantly improved fuel consumption. But more importantly, the conic design doubled as a heat shield.

Q5MSPal.jpg

UsP9dK7.png

KSP hoped to recover the second stage after a single orbit, but for this test, they simply wanted to test its maneuvering and navigation. The L-2R “Hopper” prototype had a simple mission: launch, reach a height of 2,000 meters, translate over to the landing pad, and then land safely. KSP would then analyze the flight results and apply lessons learned for the next Lindor Shuttle flight. Everything went as planned until the unexpected- Hopper ran out of electricity! With the throttle stuck, the engine continued to burn as the stage flew out of control. It easily missed the designated landing area, bounced on its landing gear a couple of times, and finally smashed into the ground and destroyed itself. KSC engineers quickly realized that the L-2R needed more batteries and electrical generators, so they added batteries, small solar panels, and some fuel cells to the next prototype- and the L-2R stacked atop L-9R-1 that awaited flight.

FODaQFr.jpg

N0v84qr.jpg

Zi9W2Sy.jpg

Thirty-five days later, KSC tried again. This time, L-2R-2 worked perfectly. That success paved the way for LSS-6 to proceed with its mission…

EfWhfka.jpg

ejXB6YI.png

Jy7hlDu.png

For this flight, Curiosity (OV-202) stood atop the L-2R-3 second stage along with the L-9R-1 reusable first stage. Both Curiosity and L-2R-3 were ready to make their maiden flights. The Lindor Shuttle launched without issues; the first stage dropped off on time and landed at Welcome Island, while the new L-2R continued to boost Curiosity into orbit. But unlike previous flights, where the second stage stopped just short of interesting with Kerbin, OV-202 separated from L-2R when the second stage would just barely skim the upper atmosphere. Just in case things went wrong, L-2R-3 would still eventually deorbit.

zkdYWyy.png

Qycky0T.png

Go7Lekc.png

6MalL3I.jpg

As on-orbit tests of the second stage commenced, Curiosity made her way to Skybase while carrying the station’s new airlock module in her cargo bay. It didn’t take long for the crew to pivot the airlock module out of the bay, attach the TMV, and pilot it over to the end of the Lab Module for temporary storage. Curiosity returned home the next day…

FCQ1xVp.jpg

Then, after a day of testing in space, it was time to bring L-2R-3 home. KSC wasn’t sure if it would work or not, but that’s the point of flight testing. Right on time, the reusable second stage of Lindor unlocked its reserve propellant tanks and performed its deorbit burn. 13 minutes later, it entered Kerbin’s upper atmosphere. For this test, KSP decided to land the prototype at Welcome Island- just in case something went wrong. Thankfully, things went right.

zlh8zsj.png

HXprSn3.jpg

HPEHrlv.jpg

The engine withstood reentry despite some overheating warnings, and the stage was on course for landing. The only problem was that it descended too fast for the chutes to deploy, and the engine failed to ignite to slow it down. L-2R-3 slammed into the ground with no hope of recovery. But engineers gained a lot from the attempt, and next time they’d stick the landing for sure…

vXuXvbo.jpg

The Kerman States were well on their way to achieving a fully reusable shuttle launch system, but they weren’t the only ones with such a lofty dream. A continent away, the vonKerman Republic had their own ambitions. While most wanted to cooperate with the Kerman States to explore space, some weren’t as trusting. They saw the Lindor Shuttle as a military craft capable of stealing satellites or dropping munitions from orbit, and they needed to achieve parity. Fortunately, Drax Aerospace provided the answer.

When they lost the Shuttle Launch System contract, Drax Aerospace published the plans for their shuttle orbiter out of spite. vonKerman engineers knew a good opportunity when they saw one, so they quickly copied the plans. After analyzing the schematics, they realized that they could improve upon the design by moving the main engines to the external tank. That required a redesign of the orbiter, but it also meant that the vonKermans could build a super-heavy lift rocket of their own. The resulting Koloss (“Colossus” in Kerman) booster core was powered by four Vektor engines- vonKerman copies of the KS-25 Rainbird engines proposed for SLS- while the twin side boosters each had a pair of KS-160 Orca motors. By moving the engines to the core, Koloss could lift heavy payloads other than the orbiter. Better yet, even with the orbiter, Koloss could lift payloads too wide to fit the orbiter’s cargo bay thanks to its hollow nosecone.

Today though, Koloss carried Schneestrum (“Blizzard”) on its back. Though very similar to the Drax orbiter, the vonKerman orbiter had significant differences. Schneestrum moved its orbital maneuvering system engines and a single jet engine into the space that the main engines were on the Drax design. Additionally, they added air intakes where the jet engines were, and they added additional propellants in the orbiter’s wings. Plus, they shifted the nose gear further back. Finally, due to a lack of thermal blanket technology, the vonKerman engineers covered the entire orbiter in heat resistant tiles.

jTLaOLt.jpg

waBImXM.png

DDA1mcm.png

Two astronauts, Hanse vonKerman and Sofia vonKerman, sat in Schneestrum’s cockpit, leaving eight other seats unoccupied. When the countdown reached zero, the engines on Koloss ignited and the launch vehicle leaped into the sky. Two minutes later, the side boosters dropped away and prepared for landing while the booster core and orbiter continued their climb into orbit.

W9Bs9iD.png

S5OfZV2.png

qsU0xv5.png

rPmIDT2.png

Once above the atmosphere, Koloss jettisoned its fairing to reduce mass. Six and a half minutes after liftoff, Schneestrum attained a 143km by 150km orbit.

The crew pointed retrograde and discarded the core booster before pointing prograde and opening their payload doors. The two pilots extended the orbiter’s test instruments in the back of the payload bay, and then put some distance between themselves and the core booster.

NKCKAxC.png

5Cinc73.png

biwAe1T.png

Next, the booster performed a deorbit burn, and then the propulsion module separated from the core tank. As the propulsion module deorbited safely, the core tank burned up upon reentry.

TUNapAf.png

D3FTN1D.jpg

Meanwhile, Schneestrum conducted several on-orbit tests including checking the maneuvering system, testing flight controls, and the like, before performing a plane-change maneuver. Next, the pilots steadied the orbiter before releasing their payload: Drakken Palast. Flying free of the orbiter’s payload bay, Drakken Palast deployed its antennae and began its automated systems checks.

Po6I2Ne.png

PWHIbLy.png

aE6ZR35.jpg

j1DJoB0.png

Once it delivered its payload, Schneestrum immediately began preparing to land by closing its payload bay doors and plotting its maneuvering burn. Half an hour later, the vonKerman orbiter landed safely back at Darude...

rDQduJ5.png

Z4YnUHp.png

Finally, after Schnesstrum landed, the vonKermans once again focused their efforts on Drakken Palast. A series of engine burns placed it on course with its desired destination: Skybase! Originally intended as the core of a new vonKerman space station, the goodwill created with Münflight 6 convinced the upper management of the vonKerman Space Agency to instead bring Drakken Palast to Skybase to form an international space station. Thus, on Montezu 31, 1992, Skybase International was born when Drakken Palast docked with Skybase.

The station crew immediately got to work. Gertrude used the TMV to reposition the Docking Tunnel brought up on LSS-3 onto Drakken Palast’s forward docking port, and then repositioned the Airlock Module on Unity Node’s ventral docking port. Finally, she added some support struts to the airlock and Drakken Palast. The rest would have to wait a bit longer…

pSYvKRH.png

The next day, Sofia vonKerman (PLT), Karl vonKerman (ENG), and Sara vonKerman (SCI) boarded an upgraded Drakken rocket for their trip to Skybase International. The vonKermans hedged their bets against their shuttle failing and made sure that they had an alternative access to space. By upgrading the venerable Drakken, they improved its performance while keeping its basic design. Instead of the older RK-7 Kodiak and RV-1 Cub motors used in the boosters as well as the first and second stages, the vonKermans upgraded the booster and first stage engines with more advanced KS-10J Walrus motors. For the second stage, they used a RE-L10 Poodle engine, and the Drakken service module replaced its four 48-8s Spark engines with a single LV-909 Terrier that the Kermans provided as part of the technology exchange. And though Drakken was still an expendable launch vehicle, the cost was less than recovery would be- and far less than a shuttle launch!

RXXg2Xg.png

FeK8FAO.png

4HfMcpZ.png

The Drakken lifted off in pre-dawn hours, and everything went as planned. The boosters dropped away, followed by the first stage, and the second stage had plenty of delta-v to finish orbital insertion, match planes with Skybase, and even increase Drakken’s altitude for a more favorable phasing orbit before deorbiting- or it would have, had the second stage added a probe core! The vonKermans took note of the new space trash, and continued with their adventures…

j2SU0jO.png

AcyDjBQ.png

EJ2yJ7J.png

A few hours later, the Drakken spacecraft arrived at Skybase International, where Sofia, Karl, and Sara disembarked their capsule and entered Drakken Palast. As Karl and Sara began turning on the lights, Sofia met with Gertrude in the Docking Adapter Module. The kerbals celebrated the momentous occasion by sharing a salad made from vegetables grown in the DAM greenhouse.

GNqpjD9.jpg

XHX2JSl.png

rnN1Rdf.png

OJzIu4O.png

okdzNt9.png

After sharing a meal, the astronauts got to work. After turning on Drakken Palast’s interior and exterior lights and deploying the solar arrays, Karl stepped outside to attach struts between the vonKerman station module and the Docking Tunnel. Next, Gertrude stepped out to attach struts to the solar observatory to stabilize it. Next, Sofia took remote control over the TMV, piloted it over to the Lab Module, and moved the Lab Module to its permanent location atop Drakken Palast’s dorsal docking port. Finally, she moved the Pressurized Mating Adapter to the Lab Module’s storage port, and Karl attached struts to the Lab. At last, Drakken International was open for business.

w8odS1R.png
Link to comment
Share on other sites

  • 2 weeks later...

Chapter 5

TM6yz8T.jpg

“I still can’t believe that I’ve let you drag me into this,” Adsii Kerman said while sitting in the cockpit of Ascension (Mk-33-02). As the world’s leading expert on Kermantian language and history- which was a hobby, professionally, he was an astronomer and planetary scientist- Adsii Kerman didn’t expect to be riding a rocket into space! The very thought of traveling into space made him uneasy. But he’d more than earned it.

Adsii uncovered a conspiracy perpetrated by Drax Kerman to fake the world ending to drive corporate profits. That ruse proved so embarrassing to the world leaders who fell for it that they quietly covered it up. But they had to admit, the hoax did spur the nations of Kerbin to explore space beyond Project Münflight. And if that hadn’t happened, they wouldn’t have learned that somehow, ancient Kermantians, with Neolithic technology, explored the Kerbolar System eons before modern kerbals did.

jZlIScQ.jpg

“There’s an anomaly near our mining site on the Mün,” Scott Kerman, CEO (emeritus), majority shareholder, and Chief Test Pilot of Orbital Dynamics said. Technically, Sara Kerman was Chief Executive Officer since the beginning of the company, but somehow, he ended up being a Co-CEO. But he finally stepped away from that role last year to focus full time on his love of flying- not that he ever stopped doing that when he formed Orbital Dynamics. It’s just that now, his life is less stressful.

mScfQJj.png

“We need your expertise to study it. Besides, it’s company policy that every employee makes at least one orbital flight,” Scott pointed out.

bONc07O.png

“I know but I- oh…” Adsii looked out the window at Kerbin orbiting below them. They’d just reached orbit nine minutes after takeoff. Despite the queasiness in his stomach from microgravity, he couldn’t help but stare outside the windows in awe and wonder. “There are no borders,” he said.

“Exactly,” Scott answered.

X0azvbl.png

Two and a half hours later, Ascension arrived at Homestead Hotel (currently in-between paying customers) and docked at the orbiting outpost. It was the last time that Mk-33-02 would do so; Ascension was on her last flight before retiring to the Kerbal Spaceflight Museum, formerly known as the Boneyard. Orbital Dynamics’ gravitic technology revolutionized spaceflight, and it was cheaper to build a new Mk-33 than it was to tear down and rebuild the existing ones to use gravitic engines. After Ascension retired, Dauntless and Resolute would soon follow.

Scott, Maxpond, Frolie, and Adsii went from one end of the hotel to the other and boarded Seagull, a Finch-class Modular Orbital Transfer Vehicle. The Seagull used to be powered by an Orbital Cargo Transfer Vehicle to bring tourists to Kerbin’s müns and back and needed special landing equipment to reach the surface. Now, though, thanks to gravitics, Seagull had a single GND-01 Quantum gravitic engine and a set of fuel pods equipped with landing gear. No more cumbersome cryogenic engines and fuel tanks needed!

dF1tmAy.png

zaeOKlm.jpg

lyyhOI2.jpg

Once aboard, they stowed their gear and Scott prepped Seagull for launch. After turning on the lights, powering up the converter, and generally making themselves comfortable, Seagull departed Homestead Hotel. Half an hour later, they were on their way to the Mün. Four days later, they arrived in its Sphere of Influence, but it took another couple of days to rendezvous and dock with Oasis.

“Lots of obsolete cryogenic tech here,” Frolie remarked. He helped design and assembled all the hardware that regularly ferried propellium and oxidizer from the south pole.

nbNMr5g.jpg

Once again, the four astronauts had the run of the place while they waited for the landing site to emerge from darkness. Four days later, they departed the station and headed to the surface. Adsii thought that it was surreal to see trace amounts of dust hovering above the surface...

When they won the DSEV(X) competition, Orbital Dynamics used Seagull to test the Discovery-class’s gravitic engine. It worked well, but it left the testbed with an overpowered engine. So, when the Seagull deorbited, it came to a dead stop relative to the ground and slowly started to freefall. But that gave Maxpond an idea.

“Hey, Scott,” she called out from the cockpit, “you know how we always use Hohmann transfer orbits, even with gravitics?”

“Of course,” Scott answered.

“These engines are so powerful, we don’t have to do that. We can keep accelerating in a straight line. Do a Brachistochrone trajectory instead of a Hohmann.”

“A what now,” Adsii asked.

“A Brachistochrone trajectory,” Maxpond answered. “You always accelerate, but you accelerate in the opposite direction halfway to your destination to slow down. Regular engines don’t have the delta-v to do that, but gravitic engines do.”

“Who names their kid Brachistochrone,” Frolie mused.

“Don’t ask me,” Maxpond responded. “Anyway, I think we should give it a try sometime. Imagine going to Minmus in just a few hours instead of weeks.”

*

ekvOi70.jpg

gwGctdP.jpg

Fifteen minutes later, Seagull landed safely on the ground near the Orbital Dynamics Cryogenic Mining Outpost. No kerbal had set foot on the Mün’s south pole before, so this was a special occasion. Maxpond and Frolie stepped out first, followed by Adsii, who promptly face-planted into the regolith.

“Watch that first step,” Maxpond said playfully.

IxDjJ8p.jpg

Scott didn’t do much better, but he quickly got back up on his feet. They all took a moment to appreciate the beauty of the place, staring at clouds that shouldn’t be there, before Frolie broke their reverie and grabbed some repair kits.

“Don’t take all of our space kits,” Maxpond warned.

ONPaqei.jpg

Q6iDzJN.jpg

“I’ve only got three,” Frolie said, not looking back. Some time ago, the drills failed one by one until none remained operational. He approached the drills and realized that he couldn’t reach them to effect repairs. He ran back to the group. “Who packed the jetpack,” he asked.

Frolie got blank stares in response. “Uh, can we hover Seagull over the rig then?”

NbWsmaB.jpg

“Sure,” Scott answered, and the astronauts piled back into the lander. After everyone got back inside, Scott expertly hovered the Seagull over the mining rig and Frolie hopped out. It didn’t take him long to reset some breakers and turn the drills back on. Once he completed his task, he got back into the lander, and they set out to find the nearby anomaly.

23aNbvA.jpg

Despite their best efforts though, they couldn’t find the anomaly. “We’re right on top of it,” Adsii said, “but there’s nothing there.”

“Well, let’s go somewhere else then,” Scott said. “We’ve got plenty of supplies. We can hop over to the equator and check out some more anomalies, and then head home.”

XumPx45.jpg

oFMgjUC.png

Seagull leaped into the sky once more, heading north towards the equator. Half an hour later, they hit pay-dirt and found a green monolith stuck into the regolith. Adsii and Frolie both got out to look. Neither one was overly surprised about finding a monolith on the Mün given that the Kermantians had clearly been to Duna. They marked the spot and then hopped back into the Seagull for another trip.

0TVvQ7J.png

Another anomaly was 100km away, give or take a few kilometers.

KpuOogJ.jpg

“Two minutes and we’re there,” Scott remarked. It didn’t take long for the crew to find the anomaly: an enormous rock arch.

“Would you look at that,” Adsii said. “That thing is enormous!” He shook his head in disbelief. “How could the Kermantians make such a thing?” Adsii took some notes, marked the location of the rocky arch, and shook his head in disbelief once more.

QW07hX1.jpg

Scott shrugged. “Let’s look for more anomalies,” he said. The other two nearby were in darkness, at least for now, so he selected the last one in light. It was a mere 878km away- about fifteen minutes travelling time. A short while later, Seagull found the anomaly- another enormous arch. Adsii updated the coordinates of the anomaly while Scott flew the lander down to the surface. It looked very similar to the previous one. They rolled under it, astonished by its size, and then took off again.

The team spent another couple of days in orbit waiting for the remaining anomalies to emerge from darkness. Two of them were monoliths like those found on Duna and Kerbin, but the third, located at Site W-N01S, was another arch- or so they thought.

q0G0zKV.jpg

“What’s that glinting,” Frolie asked, pointing to the top of the rocky arch. Scott approached from the side and swung the Seagull around to get a look at the enormous structure from the front, and then gasped. Unlike the other rocky arches, this one had a broken shell that revealed a clearly manufactured metallic structure with large glowing lights. The metal arch was easily as thick as the length of the Seagull and approximately 120 meters tall. The exposed parts of the golden material appeared to be weathered or scuffed from exposure to the near vacuum of space.

0HTo8cz.png

“There’s no way the Kermantians built that,” Adsii said.

*

“Good job with the L-2R,” KSP Insider wrote. “We were ready to conduct a gradual test program of low altitude hops, a high-altitude hop, then a test landing into the ocean before attempting to land at Welcome Island. Your fictional version’s test program was a too short, but the crash at the end was a nice touch. We would’ve learned more with an accelerated test program, but it would also have been much more expensive.

“Also, the cone shapes on the bottom of the upgraded Drakken’s boosters would cause excessive shock heating. A tube-shaped fairing would alleviate that. Finally, the vonKerman Republic had a very restricted budget post Münflight, which is why they didn’t build a Shuttle comparable to ours. It was only after feeling embarrassed about it that they finally flew Kallisto. Developing their own Shuttle and superheavy booster would’ve bankrupted their space agency. Without a large budget increase, I doubt that the vonKermans would fly their Drax-ish Shuttle more than once or twice a year. They would need a significant goal to get more Funds- which would of course compete with their new orbiter for funding…”

Karbal prided himself on accuracy and had to think about how his fictional vonKermans afforded their shuttle. He wasn’t sure that technological parity would be enough. Maybe they needed a new goal? He’d had to do more research. Meanwhile, he read another comment.

“What about the Ministry of Space,” another poster wrote. “MoS launched Arrow Lab during a test flight before KSP invited them to join Project Starlab. They also had their Arrow Crew Vehicle in development too.”

Karbal knew about Arrow Lab and the conic-shaped crew vehicle, but he was just waiting for the right time to introduce it. With the Skybase International storyline concluded, he decided that now was the right time…

(ALT) Keep Looking Up Part 4 – A Gentleman’s K-20

bQiVlHi.jpg

At the Yeager Astrodome, the Ministry of Space- the mcKerman Kingdon’s space program- readied their first launch since the end of Project Münflight. During Münflight, the space agency supplied several Arrow Transfer Vehicles to help refuel the Kerman States’ missions to Kerbin’s müns. The agency grew out of a need for the Kerman States to increase its launch capability at a time when they lacked the industrial capacity to do so. By providing space technology to the mcKerman Kingdom in exchange for launch services, they got what they needed while forming a new partner in space. But not all partnerships last.

When Münflight ended and the Shuttle Era began, KSP needed as many payloads as it could get for Lindor Shuttle. Moving Kerman Air Force flights to Shuttle helped, but they wanted more. In their search for more payloads, KSC engineers calculated that a single Lindor flight could deliver more propellant to orbit than the series of Arrow flights did- and for cheaper once the L-2R began regular flights. To that end, they cancelled their MoS contracts for future refueling flights. Despite that, the Ministry of Space had other plans…

The new Arrow 4 launch vehicle consisted of a recoverable Common Core first stage powered by a single RE-M3 Mainsail engine and two 48-7S Spark engines providing roll control. The design enabled the Arrow 4 to use a pair of recoverable Common Core boosters to form the Arrow 4 Heavy variant (the central Common Core was flown in expendable mode), but for this flight, the vehicle had twin expendable S1-SRB-KD25k Kickback solid rocket boosters to help the vehicle during its initial flight.

VLHrT9M.png

FzfDX3w.png

16voAyr.jpg

FPoYDe4.png

The Arrow 4 lifted off, burned through its Kickbacks, and discarded them as it continued its climb. Later, the first stage expended its propellants, and it too was discarded, leaving the Arrow 4 Upper Stage to continue the work. A single RE-I5 Skipper engine powered the upper stage and its cargo all the way to orbital height, but just before orbital insertion, the vehicle jettisoned its payload fairings.

k3nDqf9.png

5FDvD0S.png

Finally, after nearly attaining orbit, the upper stage dropped off its cargo- a prototype module called Arrow Hab 1- and arched back down to burn up upon reentry. Meanwhile, Arrow Hab 1 lit its maneuvering engines and finished circularizing its orbit. After deploying its antenna and solar arrays, the module was ready to work.

The Ministry of Space hired the Arrow Space Corporation to derive the Arrow Hab from their Arrow Transfer Vehicle. While the service and propulsion section remained nearly unchanged, engineers replaced the cargo section with a habit module that could seat four kerbals. Recycling systems could convert their waste products back into breathable air- and even something edible- and it even had an entertainment center to keep kerbals from going insane on long-duration missions. But before putting any kerbals inside, MoS wanted to be sure that they’d work.

WENWOuQ.png

Arrow Hab contained waste products for the recycling systems to test with, and they’d need time to process the resources. But that was fine, MoS Mission Control had Arrow Hab spend 30 days in orbit conducting automated tests before they declared it a success and deorbited it. The only thing that engineers wanted to add to the next iteration were more batteries and a fuel cell…

The Arrow Hab test flight shocked KSP, which assumed that the mcKerman Kingdom would shut down their space program after their contracts dried up. But they saw an opportunity as well. To shunt more payloads to Lindor Shuttle, they invited the mcKerman Kingdom to participate in Skylab International. Instead of launching Arrow Hab on the Arrow 4, KSC offered to launch them in the Lindor Shuttle for ridiculously low prices. But to their surprise, the Ministry of Space declined.

m3w8ndC.jpg

arh7e8Q.png

Instead, their next spaceflight revealed the Arrow Newton to the public. Built and tested in secret, the Newton was best described as a “Gentleman’s K-20” given how closely it resembled the K-20 KerbalSoar- but with refined lines. The overall design of the Newton mirrored the K-20, but there were significant differences. First, Newton was physically larger than the K-20 in all three dimensions. Second, the body of the glider was more rounded and wider. Third, the nose of the craft had a shielded Clamp-O-Tron Junior docking port to facilitate docking from the front as well as the back. Fourth, Newton sported wheeled landing gear instead of landing skids. Fifth, the spaceplane had a pair of jet engines for maneuvering and landing, whereas the K-20 was a pure glider. Finally, with a total capacity of six kerbals, Newton had twice the crew seats of the K-20, but like the modified KerbalSoar, Newton could also fly without a crew.

Like she was about to do today.

0Z4PK7N.jpg

Cr9Lm73.jpg

Spy5J7D.png

1glXFNf.png

YlFFxSY.jpg

The second Arrow 4 launch vehicle performed exactly as the first instance of its kind, discarding its spent stages during the climb into orbit and providing nearly all the velocity to attain orbit. Newton’s service module- just a modified version of the Arrow Transfer Vehicle’s propulsion system- finished orbital insertion, attaining a 128.4 km by 172.1 km orbit. Shortly afterwards, the service module deployed its solar arrays while the spaceplane started its fuel cell.

R0kw1oi.png

o2mIsOL.png

SSLWO1g.png

Newton spent the next five days testing various systems such as its RCS thrusters and its nose-mounted docking port before lining up with the Yeager Astrodome for landing. She had no trouble orienting for the deorbit burn and everything worked as expected. Just before hitting the atmosphere, Newton discarded its service module to prepare herself for atmospheric flight.

o9PVf0w.png

VkKuyop.jpg

jrnTx7P.jpg

As the service module plunged to its doom, Newton’s heat shield deflected and soaked up the heating that it generated as it slammed into the atmosphere to slow down, generating a plasma sheath along the way. Soon enough, the spaceship turned aircraft started its jet engines for the final trip home. Minutes later, Newton’s autopilot lined up on the runway and touched down perfectly, slowing to a stop near one of Yeager Astrodome’s large hangars. Though it suffered a couple of minor issues on its flight, the spaceplane returned home safely.

With their milestones met, the Ministry of Space was ready for the next stage in their space program: kerballed spaceflight.

Link to comment
Share on other sites

  • 2 weeks later...

Chapter 6

zYQ4jke.png

Phil mcKerman, CEO of Phoenix Aerospace, looked at the old photo of Ranger, the K-20, and Parrot, the Münar Excursion Module, separating from the D-1B upper stage during Münflight 3. It depicted the Transposition and Docking Maneuver required to pull the MEM from its storage position into its flight-ready position, and to resettle the K-20 onto the D-1B for the trip home. Each Münflight had to perform this maneuver, and it’s one that he wanted to recreate for their own flight.

EZCUzkC.png

Then he looked at the diagram of their modernized Münflight stack. Even without being an engineer, he could see the differences.

A8EQen9.jpg

“As you can see,” Harold mcKerman, Phoenix Aerospace’s CTO answered, “we need to make significant changes to the surplus K-20 Service Module that we bought. We’ll remove the fuel tank and rocket motors from the back of the crew cabin and the LES- uh, Launch Escape System and the K-20 Adapter from the front. Then we cap the two ends with International Docking Ports. That will take most of the work. And yes, before you ask, we must do that. The Edna doesn’t have enough delta-v to launch both the Firebird and the service module, even with the Thumper configuration. Plus, we’d have to build a whole new launch tower to accommodate the increased length of the service module.

“We launch the modified service module first, along with the Pressurized Mating Adapter and the Mini Payload Maneuvering Vehicle. That requires the custom “Needle Nose” fairing that we never flew, but we have a couple of them in storage.

“The Firebird remains unchanged, of course, and the surplus Mk2 Münar Surface Access Module that we bought only needs a few modifications so that we can attach the replica mün buggy and an IDP for the Jool Upper Stage. When we do the Transposition and Docking Maneuver, at the Mün, the MSAM will dock to the PMA.

“Our second flight launches the MSAM and buggy. We’ll have to strip the boosters of every piece of landing equipment possible to maximize our delta-v. That means sacrificing the boosters, so we’re choosing ones at the end of their lives that we would’ve turned into core stages. We also need to use the untested Thumper SRB configuration. It’s a risk, but we may as well go for broke…

“Once in orbit, it rendezvouses with the Hab Module, and the Mini PMV moves everything into place. Once it’s done, it grabs the buggy’s launch adapter and deorbits. If all goes well, then the Jool Upper Stage docks with the assembly, and we launch the Firebird with her crew. Since we’re concerned about the MSAM having enough delta-v to reach the Hab, as a contingency, the Hab retains its Edna Upper Stage for maneuvering, and as an alternative, the Jool docks with the MSAM and then rendezvouses with the Hab.

“With one flight each for the Hab, the MSAM, and the Firebird, we’ll be just within our launch budget,” Harold concluded.

“How long will the modifications take,” Phil asked.

“About sixty days for the service module mods, according to the engineering assessment,” Harold said, “and less than that for the MSAM and boosters, but that work can be done in parallel.” He could see that Phil wasn’t happy about that answer.

“That puts us right before the Nautilus returns,” Phil sighed and lamented, “and not much later, Kopernicus returns from Duna. Even using the Hab as our assembly point instead of Sky Reef, we’re not going to have enough Funds to last past Kopernicus’ return. I was hoping to generate a lot of media buzz for our flight, but the timing is just terrible. We’ll have to ride the media wave in between the two DSEV returns. I really wish one of the big three aerospace companies would’ve bought us…”

"There might be a way," Harold said.

"Oh?"

“You haven’t heard,” Harold asked.

“Heard what,” Phil asked.

“Orbital Dynamics sent a team to the Mün and found an alien arch- not made by the Kermantians. It’s all over the news…”

“I’ve been busy working, figuring out how to stretch our finances,” Phil quipped.

“Well, the ISC is bound to send an expedition to the Mün,” Harold pointed out.

“…And… if they need a stopover at Phoenix Lab,” Phil thought aloud. “We just might make it past Kopernicus’ return…”

*

6zNk2Vz.png

With the recent discovery of the giant arch on the Mün, evidence of Kermantian visitation of Duna, and phytoplankton found on Laythe, it was abundantly clear that kerbals weren’t alone in the universe. But given the point in time in his alternate history story, Karbal knew that none of those discoveries would have happened yet. Even if they did appear in his story, they’d be boring to read about since the real-life discoveries were so interesting! To spice up his alternate history, he’d need his own Alien Space Bat and he thought he had an idea on that.

Before he wrote about it though, he needed someone to be a sounding board. Since KSP Insider had been so helpful with his technical consultations- he checked Karbal’s work on the Newton and the Ministry of Space’s capabilities at the time- he reached out to KSP Insider about his ASB.

“I’m trying to spice up my alt history story,” Karbal wrote, “something different. Since readers love ASB nowadays- especially considering what’s going on IRL, I thought I’d add my own ASB into the mix. Anyway, I’ve been doing some research, and there are rumors going around that someone conned the world leaders into believing that the world was going to end, and that led to a shift in policy from exploring Duna to exploring Laythe. That hoax must have been pretty convincing! Anyway, rumor has it that the world leaders came to their senses and buried the whole story out of sheer embarrasement. Do you think that a conspiracy like that would work in my story?”

NO,” KSP Insider wrote back. Their strong response surprised Karbal. “The rumors are just that- rumors. Don’t waste your time. Instead of an ASB, I’ve got a suggestion for you that would also explain an increase in the vonKermans’ budget…”

Karbal loved the idea. He decided to put the literary wheels in motion during his next post...

(ALT) Keep Looking Up Part 5 – Sir Arthur mcKerman Memorial Space Station

PEpF77x.jpg

On the cool morning of Cuatha 2, 1990, An Arrow 4 Heavy blasted into the sky, carrying with it the first element of Kerbin’s newest space station. While the Ministry of Space originally named their complex the Arrow Space Station, they changed the name due to the recent passing of a famous science fiction author: Sir Arthur mcKerman. Sir Arthur was known for many science-fiction works, but he also was credited with the invention of the telecommunications satellite. While he didn’t live long enough to reach space himself, his namesake, the Sir Arthur mcKerman Memorial Space Station, carried a vial of his ashes into orbit.

bLk4t9l.png

lr0aavW.png

Xv31QOs.png

A minute and forty seconds later, the side boosters finished burning their propellants and dropped away, leaving the core stage to continue its climb. Thanks to a technology exchange, the boosters headed downrage to land and be reused. At nearly four minutes into the flight, the core stage dropped away to burn up in the atmosphere. A minute later, the payload fairings separated from the vehicle. Finally, eight minutes after liftoff, the Arrow 4 Upper Stage arrived in orbit with its payload.

mFV0TTh.png

The Arrow 4 Heavy was overkill for the task, but a standard Arrow 4 lacked the delta-v to safely place the payload into orbit. But once in its parking orbit, the A4US relit to place the payload into a 250km circular orbit before separating and deorbiting. The payload, known as the Arrow Cornerstone, consisted of a modified ATV that had six docking ports instead of the usual two, and its cargo stores contained life support resources exclusively.

A6mgqfD.png

v1M6S4F.png

A week later, the Ministry of Space launched the next element in their space station: the Arrow Hab. Slightly modified from the first iteration, the second iteration had additional batteries and fuel cells built into the docking tunnel adapter. The Hab launched into a parking orbit and then rendezvoused with the Cornerstone, but there was a problem: someone forgot to load the monopropellant! “Not a problem,” said MoS Mission Control, “we’ll just have the Arrow Cornerstone Module dock to it instead.” There was one problem with that plan- someone forgot to load monopropellant on the ACM too!

vVkJC9M.png

As the two spacecraft flew in formation, engineers pondered the problem until a bright intern came up with a solution: Have both spacecraft target lock orientation to each other so that their docking ports would line up, and then have Arrow Hab perform a gentle burn to approach and dock. It was risky, but it worked!

FC3h7w3.png

l242Seo.png

HPxgieR.png

FKNg9BI.jpg

The next week, after some quality control engineers got fired and replaced, another Arrow 4 lofted the Arrow Lab into orbit. Essentially a stretched Arrow Hab, the Lab contained research equipment to study various subjects, such as the effects of microgravity on the kerbal body. The occasion also marked the first flight of the Long Nose payload fairing. Arrow Lab rendezvoused and docked with the growing complex two days later.

BKcqzFV.jpg

XQZQ8P5.png

sHEbilG.png

A week after that, the Newton made her second flight- this time with Valfeld mcKerman (PLT), Nelpont mcKerman (ENG), Nedley mcKerman (SCI) and Calpont mcKerman (SCI) aboard. They docked with the orbiting complex half a day later. Nedley and Calpont immediately began setting up the Arrow Lab while Valfield and Nelpont unpacked Arrow Hab. Once the pilot and engineer completed their tasks, they got to work “testing” the Hab’s entertainment center while the two scientists toiled away in the lab…

UwiFE4n.png

The next week’s launch brought the Arrow Garden to the station. This modified ATV had an impressive set of windows to enable plants to grow in low Kerbin orbit. Like their fellow astronauts at Skybase, the mcKermans wanted to try growing plants for consumption and life support renewal.

UU7Rgs0.png

TlXXvzx.png

Another modified ATV became the station’s airlock module, and a final launch brought a cupola to the station for Kerbin observations. At last, the Ministry of Space announced the completion of the Sir Arthur mcKerman Memorial Space Station.

8gwbaEJ.jpg

And a couple of days after their announcement, the vonKermans made an announcement of their own: they challenged the Kerman States to a new space race- this time, to Eve!

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...