[1.4.*] [2.5.3] (2018-04-06) UbioZur Welding Ltd. Continued

Badsector · May 28, 2015

Dont work withh stock fuel switch (callculate fuel in parts with stock fuel, changing config resources dooesnt help).

Try this one http://forum.kerbalspaceprogram.com/threads/121321-Stock-Fuel-Switch?p=1977116&viewfull=1#post1977116, stock fuel switch work only with default tanks, that one work with all

Elendiar · May 28, 2015

Thanks. Also if load new craft and first part is welded, after launch vessel start buggy levitating.

Edited May 28, 2015 by Elendiar

Shadowmage · May 28, 2015

Hello.
I'm very interested in this mod. I have a few questions:
-Are the precautions on the opening post still valid? For example, it says not to wold two landing legs or solar panels together. But can I weld, say, 6 flat solar panels to a fuel tank without a problem?
-What happens to welded fuel lines or struts?
-Does this work with mod parts such as procedural tanks or infernal robotics?

As far as I know those are all still valid concerns.

Multiple animated/module driven parts will often not work correctly when welded together. For instance with landing legs; only a single leg will function. Same with solar panels (at least, only a single one will function for the suncatcher transform, so you may get power from multiple panels, but only one will responsible for updating the power curve, and may not accurately represent the sun-angle/power output that should happen from multiple panels).

No clue on what happens with struts or fuel lines, though both are 100% uneccesary. The vessel becomes one big part; there are no inter-part reinforcements needed, so struts are useless. And as one big single part vessel, there are no parts for fuel to flow through, only the single part that it resides in; so fuel lines too are un-needed.

IR and Procedural parts are a big 'no'. Any part that messes with meshes is going to have problems as they are generally designed to only have their modifiable mesh in the part. There -might- be a few that work, but I haven't found them.

Elendiar · May 28, 2015

As far as I know those are all still valid concer.

So what about intakes? Its a resourse so can stackk. Need too edit cfg or what?

Alewx · May 28, 2015

So what about intakes? Its a resourse so can stackk. Need too edit cfg or what?

The Resource IntakeAir will be stacked and summed up correctly, but the ModuleResourceIntake that calculates how much you get Needs to be edited manually.

As far as it looks it will sum up the values for area and intakespeed at the module which will give wrong result. you need to change the intakeSpeed.

You can fix this by changing your moduleAttributeList.XML

Just add it as "ModuleResourceIntake_intakeSpeed" into the list of the AveragedModuleAttributes

Elendiar · May 28, 2015

Thanksbut still misundetstand what Numbers write inModuleResourceIntake_intakeSpeed

Alewx · May 28, 2015

Thanksbut still misundetstand what Numbers write inModuleResourceIntake_intakeSpeed

You write no numbers into that, it is just that the Weldingtool reads this list of entries and calculates them appopriate.

So the next welding will use the intakeSpeed as an averaged value.

Elendiar · May 28, 2015

I add this into *weldingcraftname*.cfg ? Also unswer, can i manually add fuction to activate something, example: cargo bay with antenna, antenna extend action overwrite open/close. In cfg i see smthing like ad daction in module section of antenna, and nothing in module section cargo bay. Becouse sometime cargo with atmo analyzer and antenna works, are actions, so can i manually add those buttons?

And can i weld any pod, like mk3pod+cargo+fuel tanks as one, with having seats for crew, sas stabil, opening cargo? Or pods are unwelded? I experiment but it take a lot of time testing.

One time i have locked 10 rapiers (occlued), and only 1 Activated at start,another 10 activated only after closing cargo bay!(was opened at launch). But previous 4 launch was without that occupied engines.

- - - Updated - - -

And intakes works, i add nothing in cfg but have 13.2 intake amount that filled normally, but i dont test it on high altitude yet

- - - Updated - - -

Also if weld only wings to wings for one big wing (without moving surface), lift sum?

iDisOrder · May 29, 2015

Reading back a few pages, I have a few questions:

Is this current version working with 1.0.2?

If not what do I have to add or change to get it to be?

I read multiple animated parts on a welded item will result in only one working like landing gear solar panels, etc.

Does this include lights?

To remedy this, can one of these be added to the welded part and the rest afterward resulting in all functioning?

Does welding animated parts stop it from working in an action group?

Is fuel flow affected between tanks?

jmbailey2000 · May 29, 2015

As a good and well educated reader you have read the entire OP where a link to Github is present, right?
Heya guys, my flu is still there but I made a 2.1.2 release ready for KSP 1.0.
As always you can find it on Github for DOWNLOAD.
And the that is the reason that sick ppl should not code anystuff.
2.1.3 with a Major bugfix that could cause the game and weldment to be lost.

So glad to see this starting to come to 1.0!!!!

Some stuff is working great but found something that isn't working that used to work under welding in .90. Don't know if it is supposed to or not, but thought I'd mention it........

I create "engine pods", weld them together and use them as pusher tugs or base engines for my fuel stations. Under .90, no issues, but under the 1.0 welding, the engines don't appear to work. Upon physics load on the launch pad, the engine has a cowling (which was not part of the original ship, and the engine animation is firing out the engine and the side of the launch pad. No fuel is consumed and thrust is being created. You can activate the engine in the right click menu, but that has no effect.

However, if I build/weld the pod without the engine, then as I'm building a rocket add an engine to the welded pod, everything works just fine.

Just giving you a heads up and once again TRULY grateful for such a great mod and look forward to more revisions and tweaks!!

PS - you you are getting over your illness!!!

Alewx · May 29, 2015

The OP says quite clear Engines are a BIG NO GO, this is still persistent.

Reading back a few pages, I have a few questions:
Is this current version working with 1.0.2?
If not what do I have to add or change to get it to be?
I read multiple animated parts on a welded item will result in only one working like landing gear solar panels, etc.
Does this include lights?
To remedy this, can one of these be added to the welded part and the rest afterward resulting in all functioning?
Does welding animated parts stop it from working in an action group?
Is fuel flow affected between tanks?

2.1.3 that I posted a few pages back is made to work with 1.0.2.

I never welded lights, but I imagine it applies to the same rule as animated parts.

Fuel flow is working like always, welding makes the part one big tank.

Having multiple animated parts of the same Kind, will render all exept one useless, no matter if rightclick or Action Group.

I add this into *weldingcraftname*.cfg ? Also unswer, can i manually add fuction to activate something, example: cargo bay with antenna, antenna extend action overwrite open/close. In cfg i see smthing like ad daction in module section of antenna, and nothing in module section cargo bay. Becouse sometime cargo with atmo analyzer and antenna works, are actions, so can i manually add those buttons?
And can i weld any pod, like mk3pod+cargo+fuel tanks as one, with having seats for crew, sas stabil, opening cargo? Or pods are unwelded? I experiment but it take a lot of time testing.
One time i have locked 10 rapiers (occlued), and only 1 Activated at start,another 10 activated only after closing cargo bay!(was opened at launch). But previous 4 launch was without that occupied engines.
- - - Updated - - -
And intakes works, i add nothing in cfg but have 13.2 intake amount that filled normally, but i dont test it on high altitude yet
- - - Updated - - -
Also if weld only wings to wings for one big wing (without moving surface), lift sum?

Welded Wings are something Special especial with the new aerodynamics.

If you have only one welded cargo bay it will work fine.

But let me ask you how experienced are you with modifing part.cfg's?

Welding pods and tanks work fine, but I remember that the internals will be removed.

So glad to see this starting to come to 1.0!!!!
Some stuff is working great but found something that isn't working that used to work under welding in .90. Don't know if it is supposed to or not, but thought I'd mention it........
I create "engine pods", weld them together and use them as pusher tugs or base engines for my fuel stations. Under .90, no issues, but under the 1.0 welding, the engines don't appear to work. Upon physics load on the launch pad, the engine has a cowling (which was not part of the original ship, and the engine animation is firing out the engine and the side of the launch pad. No fuel is consumed and thrust is being created. You can activate the engine in the right click menu, but that has no effect.
http://i.imgur.com/9UDEbBd.png
However, if I build/weld the pod without the engine, then as I'm building a rocket add an engine to the welded pod, everything works just fine.
Just giving you a heads up and once again TRULY grateful for such a great mod and look forward to more revisions and tweaks!!
PS - you you are getting over your illness!!!

Thanks for your wishes.

Engines are broken since the first version of welding, anyone who got it working had just pure luck.

It is a pretty difficult and as it seems to Change with each gameversion, it makes it even more complicated.

Edited May 29, 2015 by Alewx

Elendiar · May 29, 2015

No experience. But add some command in correct line i can) just need list of them)

- - - Updated - - -

And whaat about drug?mmy spaceplane With 28 parts easy accelerate With 40 degree, but 86 parts must have 0-5 angle to overcome 300 m Per s speed

ICirceI · May 29, 2015

I am having a problem when trying to weld DMagic parts. When I press Weld, it just highlights all of the parts and does nothing else. The GUI does not pop up afterward.

[LOG 04:37:35.867] [WeldingTool]  Config was saved
[LOG 04:37:35.867] [WeldingTool] v2.1.3 - 1.02.0 - Continued
[LOG 04:37:35.868] [WeldingTool] ----- Starting Welding -----
[LOG 04:37:35.869] [WeldingTool] Welding this part: structuralPanel2
[LOG 04:37:35.869] [WeldingTool]  ..part rescaleFactor 1.00
[LOG 04:37:35.870] [WeldingTool]  ..part scaleFactor 1.00
[LOG 04:37:35.871] [WeldingTool]  .Found 1 config files
[LOG 04:37:35.872] [WeldingTool]  ..Config structuralPanel2 has no MODEL node
[LOG 04:37:35.872] [WeldingTool]  ..MODEL url: Squad/Parts/Structural/structuralPanel2x2/model
[LOG 04:37:35.873] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 04:37:35.873] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.874] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.875] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.875] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.876] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.876] [WeldingTool]  ..position (0.000, 0.000, 0.000)
[LOG 04:37:35.877] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 04:37:35.877] [WeldingTool]  ..scale (1.000, 1.000, 1.000)
[LOG 04:37:35.878] [WeldingTool]  ..Config structuralPanel2 has 0 RESOURCE node
[LOG 04:37:35.878] [WeldingTool]  ..Config structuralPanel2 has 7 MODULE node
[LOG 04:37:35.879] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 04:37:35.879] [WeldingTool]  [WeldingTool] ..MODULE add: BBModule
[LOG 04:37:35.880] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.880] [WeldingTool]  [WeldingTool] ..MODULE add: ModuleAGX
[LOG 04:37:35.881] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.882] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.882] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.882] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.883] [WeldingTool]  [WeldingTool] ..MODULE add: USI_ModuleRecycleablePart
[LOG 04:37:35.884] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.884] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.885] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.885] [WeldingTool]  [WeldingTool] ..MODULE add: GeometryPartModule
[LOG 04:37:35.886] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.886] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.887] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.887] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.888] [WeldingTool]  [WeldingTool] ..MODULE add: FARAeroPartModule
[LOG 04:37:35.888] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.889] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.889] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.890] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.890] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.890] [WeldingTool]  [WeldingTool] ..MODULE add: FARPartModule
[LOG 04:37:35.891] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in prelaunch FxGroups
[LOG 04:37:35.892] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in activate FxGroups
[LOG 04:37:35.892] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in active FxGroups
[LOG 04:37:35.893] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in deactivate FxGroups
[LOG 04:37:35.894] [WeldingTool]  .Part structuralPanel2 has 2 Stack attach node(s)
[LOG 04:37:35.894] [WeldingTool]  .Stack Node Add: topstructuralPanel20
[LOG 04:37:35.895] [WeldingTool]  .Stack Node Add: bottomstructuralPanel20
[LOG 04:37:35.895] [WeldingTool]  .. VesselType - Debris
[LOG 04:37:35.896] [WeldingTool]  AdvDebug(.New Center of Mass: (0.0, 0.0, 0.0)
[LOG 04:37:35.896] [WeldingTool]  AdvDebug(weldThisPart - newpart.partInfo.category: Structural
[LOG 04:37:35.897] [WeldingTool] Welding this part: dmDAN
[LOG 04:37:35.897] [WeldingTool]  ..part rescaleFactor 1.10
[LOG 04:37:35.898] [WeldingTool]  ..part scaleFactor 0.91
[LOG 04:37:35.899] [WeldingTool]  .Found 1 config files
[LOG 04:37:35.900] [WeldingTool]  ..Config dmDAN has 1 MODEL node
[LOG 04:37:35.900] [WeldingTool]  ..MODEL url: DMagicOrbitalScience/RoverScience/DAN/modelDAN
[LOG 04:37:35.901] [WeldingTool]  ..node.HasValue("position") False
[LOG 04:37:35.901] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 04:37:35.902] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 04:37:35.902] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 04:37:35.903] [WeldingTool]  ..node.HasValue("scale") True
[LOG 04:37:35.903] [WeldingTool]  ..node scale 1, 1, 1
[LOG 04:37:35.904] [WeldingTool]  ..Childs count 1
[LOG 04:37:35.904] [WeldingTool]  ..newpart position (-0.637, 15.061, 0.637)
[LOG 04:37:35.905] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.905] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.906] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.907] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.907] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.908] [WeldingTool]  ..position (-0.637, 0.061, 0.637)
[LOG 04:37:35.908] [WeldingTool]  ..rotation (360.000, 0.000, 0.000)
[LOG 04:37:35.909] [WeldingTool]  ..scale (1.100, 1.100, 1.100)
[LOG 04:37:35.909] [WeldingTool]  ..Config dmDAN has 0 RESOURCE node
[LOG 04:37:35.910] [WeldingTool]  ..Config dmDAN has 9 MODULE node
[LOG 04:37:35.910] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 04:37:35.911] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.911] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.912] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.912] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.913] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.913] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.914] [WeldingTool]  [WeldingTool] ..MODULE add: DMModuleScienceAnimate
[LOG 04:37:35.914] [WeldingTool]  | BBModule Module already exists!!!
[LOG 04:37:35.915] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.915] [WeldingTool]  | ModuleAGX Module already exists!!!
[LOG 04:37:35.916] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.916] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.917] [WeldingTool]  | USI_ModuleRecycleablePart Module already exists!!!
[LOG 04:37:35.917] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.918] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.918] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.919] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.919] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.920] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.920] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.921] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.921] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.922] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.922] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.923] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.923] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.924] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.924] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.925] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.925] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.926] [WeldingTool]  | GeometryPartModule Module already exists!!!
[LOG 04:37:35.926] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.927] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.927] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.928] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.928] [WeldingTool]  | FARAeroPartModule Module already exists!!!
[LOG 04:37:35.929] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.929] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.930] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.930] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.931] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.931] [WeldingTool]  | FARPartModule Module already exists!!!
[LOG 04:37:35.932] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in prelaunch FxGroups
[LOG 04:37:35.933] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in activate FxGroups
[LOG 04:37:35.933] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in active FxGroups
[LOG 04:37:35.934] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in deactivate FxGroups
[LOG 04:37:35.934] [WeldingTool]  .Part dmDAN has 0 Stack attach node(s)
[LOG 04:37:35.935] [WeldingTool]  .. VesselType - Debris
[LOG 04:37:35.935] [WeldingTool]  AdvDebug(.New Center of Mass: (0.0, 0.0, 0.0)
[LOG 04:37:35.936] [WeldingTool] Welding this part: rpwsAnt
[LOG 04:37:35.936] [WeldingTool]  ..part rescaleFactor 1.10
[LOG 04:37:35.937] [WeldingTool]  ..part scaleFactor 1.00
[LOG 04:37:35.938] [WeldingTool]  .Found 1 config files
[LOG 04:37:35.939] [WeldingTool]  ..Config rpwsAnt has 1 MODEL node
[LOG 04:37:35.939] [WeldingTool]  ..MODEL url: DMagicOrbitalScience/ProbeScience/RPWS/modelRPWS
[LOG 04:37:35.940] [WeldingTool]  ..node.HasValue("position") False
[LOG 04:37:35.940] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 04:37:35.941] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 04:37:35.941] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 04:37:35.942] [WeldingTool]  ..node.HasValue("scale") True
[LOG 04:37:35.942] [WeldingTool]  ..node scale 1, 1, 1
[LOG 04:37:35.943] [WeldingTool]  ..Childs count 1
[LOG 04:37:35.943] [WeldingTool]  ..newpart position (-0.350, 15.094, 0.607)
[LOG 04:37:35.944] [WeldingTool]  ..newpart rotation (0.000, 0.707, -0.707, 0.000)
[LOG 04:37:35.944] [WeldingTool]  ..newpart rotation.eulerAngles (90.000, 180.000, 0.000)
[LOG 04:37:35.945] [WeldingTool]  ..newpart rotation.localEulerAngles (90.000, 180.000, 0.000)
[LOG 04:37:35.946] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.946] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.947] [WeldingTool]  ..position (-0.350, 0.094, 0.607)
[LOG 04:37:35.947] [WeldingTool]  ..rotation (90.000, 180.000, 0.000)
[LOG 04:37:35.948] [WeldingTool]  ..scale (1.100, 1.100, 1.100)
[LOG 04:37:35.948] [WeldingTool]  ..Config rpwsAnt has 0 RESOURCE node
[LOG 04:37:35.949] [WeldingTool]  ..Config rpwsAnt has 9 MODULE node
[LOG 04:37:35.949] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 04:37:35.950] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.950] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.951] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.951] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.952] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.952] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.953] [WeldingTool]  | DMModuleScienceAnimate Module already exists!!!
[LOG 04:37:35.954] [WeldingTool]  | BreakingAttributes found = 0 
[LOG 04:37:35.955] [WeldingTool]  | DMModuleScienceAnimate - name is string
[LOG 04:37:35.955] [WeldingTool]  | DMModuleScienceAnimate - name is merged with value DMModuleScienceAnimate
[LOG 04:37:35.956] [WeldingTool]  | DMModuleScienceAnimate - animationName is string
[LOG 04:37:35.956] [WeldingTool]  | DMModuleScienceAnimate - animationName is merged with value rpwsAnimation
[LOG 04:37:35.957] [WeldingTool]  | DMModuleScienceAnimate - experimentID is string
[LOG 04:37:35.957] [WeldingTool]  | DMModuleScienceAnimate - experimentID is merged with value rpwsScan
[LOG 04:37:35.958] [WeldingTool]  | DMModuleScienceAnimate - experimentActionName is string
[LOG 04:37:35.959] [WeldingTool]  | DMModuleScienceAnimate - experimentActionName is merged with value Log Radio Plasma Wave Data
[LOG 04:37:35.959] [WeldingTool]  | DMModuleScienceAnimate - resetActionName is string
[LOG 04:37:35.960] [WeldingTool]  | DMModuleScienceAnimate - resetActionName is merged with value Discard Data
[LOG 04:37:35.960] [WeldingTool]  | DMModuleScienceAnimate - customFailMessage is string
[LOG 04:37:35.961] [WeldingTool]  | DMModuleScienceAnimate - customFailMessage is merged with value The RPWS Antenna is not suitable for atmospheric use or surface deployment, try again in space.
[LOG 04:37:35.962] [WeldingTool]  | DMModuleScienceAnimate - deployingMessage is string
[LOG 04:37:35.963] [WeldingTool]  | DMModuleScienceAnimate - deployingMessage is merged with value With the antennae retracted the sensors can't read anything, deploying the system now.
[LOG 04:37:35.963] [WeldingTool]  | DMModuleScienceAnimate - experimentAnimation is bool
[LOG 04:37:35.964] [WeldingTool]  | DMModuleScienceAnimate - experimentAnimation is merged with value True
[LOG 04:37:35.965] [WeldingTool]  | DMModuleScienceAnimate - experimentWaitForAnimation is bool
[LOG 04:37:35.965] [WeldingTool]  | DMModuleScienceAnimate - experimentWaitForAnimation is merged with value True
[LOG 04:37:35.966] [WeldingTool]  | DMModuleScienceAnimate - keepDeployedMode is float
[LOG 04:37:35.966] [WeldingTool]  | DMModuleScienceAnimate - newValue - keepDeployedMode = 2
[LOG 04:37:35.967] [WeldingTool]  | DMModuleScienceAnimate - setNewValue - keepDeployedMode = 2
[LOG 04:37:35.968] [WeldingTool]  | DMModuleScienceAnimate - keepDeployedMode is merged with value 2
[LOG 04:37:35.968] [WeldingTool]  | DMModuleScienceAnimate - animSpeed is float
[LOG 04:37:35.969] [WeldingTool]  | DMModuleScienceAnimate - newValue - animSpeed = 1.5
[LOG 04:37:35.969] [WeldingTool]  | DMModuleScienceAnimate - setNewValue - animSpeed = 1.5
[LOG 04:37:35.970] [WeldingTool]  | DMModuleScienceAnimate - animSpeed is merged with value 1.5
[LOG 04:37:35.970] [WeldingTool]  | DMModuleScienceAnimate - showEndEvent is bool
[LOG 04:37:35.971] [WeldingTool]  | DMModuleScienceAnimate - showEndEvent is merged with value False
[LOG 04:37:35.972] [WeldingTool]  | DMModuleScienceAnimate - showStartEvent is bool
[LOG 04:37:35.972] [WeldingTool]  | DMModuleScienceAnimate - showStartEvent is merged with value True
[LOG 04:37:35.973] [WeldingTool]  | DMModuleScienceAnimate - showToggleEvent is bool
[LOG 04:37:35.973] [WeldingTool]  | DMModuleScienceAnimate - showToggleEvent is merged with value True
[LOG 04:37:35.974] [WeldingTool]  | DMModuleScienceAnimate - startEventGUIName is string
[LOG 04:37:35.974] [WeldingTool]  | DMModuleScienceAnimate - startEventGUIName is merged with value Deploy RPWS
[LOG 04:37:35.975] [WeldingTool]  | DMModuleScienceAnimate - endEventGUIName is string
[LOG 04:37:35.976] [WeldingTool]  | DMModuleScienceAnimate - endEventGUIName is merged with value Retract RPWS
[LOG 04:37:35.976] [WeldingTool]  | DMModuleScienceAnimate - toggleEventGUIName is string
[LOG 04:37:35.977] [WeldingTool]  | DMModuleScienceAnimate - toggleEventGUIName is merged with value Toggle RPWS
[LOG 04:37:35.978] [WeldingTool]  | DMModuleScienceAnimate - useStaging is bool
[LOG 04:37:35.978] [WeldingTool]  | DMModuleScienceAnimate - useStaging is merged with value False
[LOG 04:37:35.979] [WeldingTool]  | DMModuleScienceAnimate - useActionGroups is bool
[LOG 04:37:35.979] [WeldingTool]  | DMModuleScienceAnimate - useActionGroups is merged with value True
[LOG 04:37:35.980] [WeldingTool]  | DMModuleScienceAnimate - hideUIwhenUnavailable is bool
[LOG 04:37:35.980] [WeldingTool]  | DMModuleScienceAnimate - hideUIwhenUnavailable is merged with value False
[LOG 04:37:35.981] [WeldingTool]  | DMModuleScienceAnimate - rerunnable is bool
[LOG 04:37:35.982] [WeldingTool]  | DMModuleScienceAnimate - rerunnable is merged with value True
[LOG 04:37:35.982] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar is float
[LOG 04:37:35.983] [WeldingTool]  | DMModuleScienceAnimate - newValue - xmitDataScalar = 1
[LOG 04:37:35.983] [WeldingTool]  | DMModuleScienceAnimate - existingValue - xmitDataScalar = 1
[LOG 04:37:35.984] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar - added
[LOG 04:37:35.984] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar is merged with value 2
[LOG 04:37:35.985] [WeldingTool]  | DMModuleScienceAnimate - dataIsCollectable is bool
[LOG 04:37:35.986] [WeldingTool]  | DMModuleScienceAnimate - dataIsCollectable is merged with value True
[LOG 04:37:35.986] [WeldingTool]  | DMModuleScienceAnimate - collectActionName is string
[LOG 04:37:35.987] [WeldingTool]  | DMModuleScienceAnimate - collectActionName is merged with value Take Data
[LOG 04:37:35.987] [WeldingTool]  | DMModuleScienceAnimate - interactionRange is float
[LOG 04:37:35.988] [WeldingTool]  | DMModuleScienceAnimate - newValue - interactionRange = 1.2
[LOG 04:37:35.989] [WeldingTool]  | DMModuleScienceAnimate - existingValue - interactionRange = 1.8
[LOG 04:37:35.989] [WeldingTool]  | DMModuleScienceAnimate - interactionRange - added
[LOG 04:37:35.990] [WeldingTool]  | DMModuleScienceAnimate - interactionRange is merged with value 3
[LOG 04:37:35.990] [WeldingTool]  | DMModuleScienceAnimate - externalDeploy is bool
[LOG 04:37:35.991] [WeldingTool]  | DMModuleScienceAnimate - externalDeploy is merged with value True
[LOG 04:37:35.992] [WeldingTool]  | DMModuleScienceAnimate - usageReqMaskExternal is float
[LOG 04:37:35.992] [WeldingTool]  | DMModuleScienceAnimate - newValue - usageReqMaskExternal = 8
[LOG 04:37:35.993] [WeldingTool]  | DMModuleScienceAnimate - existingValue - usageReqMaskExternal = 8
[LOG 04:37:35.993] [WeldingTool]  | DMModuleScienceAnimate - usageReqMaskExternal - added
[LOG 04:37:35.994] [WeldingTool]  | DMModuleScienceAnimate - usageReqMaskExternal is merged with value 16
[LOG 04:37:35.995] [WeldingTool]  | DMModuleScienceAnimate - sitMask is float
[LOG 04:37:35.995] [WeldingTool]  | DMModuleScienceAnimate - newValue - sitMask = 48
[LOG 04:37:35.996] [WeldingTool]  | DMModuleScienceAnimate - existingValue - sitMask = 1
[LOG 04:37:35.996] [WeldingTool]  | DMModuleScienceAnimate - sitMask - added
[LOG 04:37:35.997] [WeldingTool]  | DMModuleScienceAnimate - sitMask is merged with value 49
[LOG 04:37:35.997] [WeldingTool]  | DMModuleScienceAnimate - bioMask is float
[LOG 04:37:35.998] [WeldingTool]  | DMModuleScienceAnimate - newValue - bioMask = 0
[LOG 04:37:35.998] [WeldingTool]  | DMModuleScienceAnimate - existingValue - bioMask = 1
[LOG 04:37:35.999] [WeldingTool]  | DMModuleScienceAnimate - bioMask - added
[LOG 04:37:35.999] [WeldingTool]  | DMModuleScienceAnimate - bioMask is merged with value 1
[LOG 04:37:36.000] [WeldingTool]  | DMModuleScienceAnimate - waitForAnimationTime is float
[EXC 04:37:36.001] ArgumentNullException: Argument cannot be null.
Parameter name: s
	System.Double.Parse (System.String s, NumberStyles style, IFormatProvider provider)
	System.Single.Parse (System.String s)
	UbioWeldingLtd.ModuleMerger.mergeModuleFloatValues (System.String newModuleName, .ConfigNode newModule, .ConfigNode existingNewModule, System.String ModuleAttribute, Boolean advancedDebugging)
	UbioWeldingLtd.ModuleMerger.mergeModuleAttributes (System.String newModuleName, .ConfigNode newModule, .ConfigNode existingNewModule, Boolean advancedDebugging)
	UbioWeldingLtd.ModuleMerger.mergeModules (System.String partname, .UrlConfig configuration, System.Collections.Generic.List`1 modulelist, Boolean advancedDebugging)
	UbioWeldingLtd.Welder.weldThisPart (.Part newpart)
	UbioWeldingLtd.UbioZurWeldingLtd.weldPart (.Part partToWeld)
	UbioWeldingLtd.UbioZurWeldingLtd.OnMainWindow (Int32 windowID)
	UnityEngine.GUI.CallWindowDelegate (UnityEngine.WindowFunction func, Int32 id, UnityEngine.GUISkin _skin, Int32 forceRect, Single width, Single height, UnityEngine.GUIStyle style)

Alewx · May 29, 2015

I am having a problem when trying to weld DMagic parts. When I press Weld, it just highlights all of the parts and does nothing else. The GUI does not pop up afterward.

[LOG 04:37:35.867] [WeldingTool]  Config was saved
[LOG 04:37:35.867] [WeldingTool] v2.1.3 - 1.02.0 - Continued
[LOG 04:37:35.868] [WeldingTool] ----- Starting Welding -----
[LOG 04:37:35.869] [WeldingTool] Welding this part: structuralPanel2
[LOG 04:37:35.869] [WeldingTool]  ..part rescaleFactor 1.00
[LOG 04:37:35.870] [WeldingTool]  ..part scaleFactor 1.00
[LOG 04:37:35.871] [WeldingTool]  .Found 1 config files
[LOG 04:37:35.872] [WeldingTool]  ..Config structuralPanel2 has no MODEL node
[LOG 04:37:35.872] [WeldingTool]  ..MODEL url: Squad/Parts/Structural/structuralPanel2x2/model
[LOG 04:37:35.873] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 04:37:35.873] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.874] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.875] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.875] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.876] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.876] [WeldingTool]  ..position (0.000, 0.000, 0.000)
[LOG 04:37:35.877] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 04:37:35.877] [WeldingTool]  ..scale (1.000, 1.000, 1.000)
[LOG 04:37:35.878] [WeldingTool]  ..Config structuralPanel2 has 0 RESOURCE node
[LOG 04:37:35.878] [WeldingTool]  ..Config structuralPanel2 has 7 MODULE node
[LOG 04:37:35.879] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 04:37:35.879] [WeldingTool]  [WeldingTool] ..MODULE add: BBModule
[LOG 04:37:35.880] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.880] [WeldingTool]  [WeldingTool] ..MODULE add: ModuleAGX
[LOG 04:37:35.881] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.882] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.882] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.882] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.883] [WeldingTool]  [WeldingTool] ..MODULE add: USI_ModuleRecycleablePart
[LOG 04:37:35.884] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.884] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.885] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.885] [WeldingTool]  [WeldingTool] ..MODULE add: GeometryPartModule
[LOG 04:37:35.886] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.886] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.887] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.887] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.888] [WeldingTool]  [WeldingTool] ..MODULE add: FARAeroPartModule
[LOG 04:37:35.888] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.889] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.889] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.890] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.890] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.890] [WeldingTool]  [WeldingTool] ..MODULE add: FARPartModule
[LOG 04:37:35.891] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in prelaunch FxGroups
[LOG 04:37:35.892] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in activate FxGroups
[LOG 04:37:35.892] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in active FxGroups
[LOG 04:37:35.893] [WeldingTool]  ..Config structuralPanel2 has 0 FXEmitters and 0 Sound in deactivate FxGroups
[LOG 04:37:35.894] [WeldingTool]  .Part structuralPanel2 has 2 Stack attach node(s)
[LOG 04:37:35.894] [WeldingTool]  .Stack Node Add: topstructuralPanel20
[LOG 04:37:35.895] [WeldingTool]  .Stack Node Add: bottomstructuralPanel20
[LOG 04:37:35.895] [WeldingTool]  .. VesselType - Debris
[LOG 04:37:35.896] [WeldingTool]  AdvDebug(.New Center of Mass: (0.0, 0.0, 0.0)
[LOG 04:37:35.896] [WeldingTool]  AdvDebug(weldThisPart - newpart.partInfo.category: Structural
[LOG 04:37:35.897] [WeldingTool] Welding this part: dmDAN
[LOG 04:37:35.897] [WeldingTool]  ..part rescaleFactor 1.10
[LOG 04:37:35.898] [WeldingTool]  ..part scaleFactor 0.91
[LOG 04:37:35.899] [WeldingTool]  .Found 1 config files
[LOG 04:37:35.900] [WeldingTool]  ..Config dmDAN has 1 MODEL node
[LOG 04:37:35.900] [WeldingTool]  ..MODEL url: DMagicOrbitalScience/RoverScience/DAN/modelDAN
[LOG 04:37:35.901] [WeldingTool]  ..node.HasValue("position") False
[LOG 04:37:35.901] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 04:37:35.902] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 04:37:35.902] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 04:37:35.903] [WeldingTool]  ..node.HasValue("scale") True
[LOG 04:37:35.903] [WeldingTool]  ..node scale 1, 1, 1
[LOG 04:37:35.904] [WeldingTool]  ..Childs count 1
[LOG 04:37:35.904] [WeldingTool]  ..newpart position (-0.637, 15.061, 0.637)
[LOG 04:37:35.905] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.905] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.906] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.907] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.907] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.908] [WeldingTool]  ..position (-0.637, 0.061, 0.637)
[LOG 04:37:35.908] [WeldingTool]  ..rotation (360.000, 0.000, 0.000)
[LOG 04:37:35.909] [WeldingTool]  ..scale (1.100, 1.100, 1.100)
[LOG 04:37:35.909] [WeldingTool]  ..Config dmDAN has 0 RESOURCE node
[LOG 04:37:35.910] [WeldingTool]  ..Config dmDAN has 9 MODULE node
[LOG 04:37:35.910] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 04:37:35.911] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.911] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.912] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.912] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.913] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.913] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.914] [WeldingTool]  [WeldingTool] ..MODULE add: DMModuleScienceAnimate
[LOG 04:37:35.914] [WeldingTool]  | BBModule Module already exists!!!
[LOG 04:37:35.915] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.915] [WeldingTool]  | ModuleAGX Module already exists!!!
[LOG 04:37:35.916] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.916] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.917] [WeldingTool]  | USI_ModuleRecycleablePart Module already exists!!!
[LOG 04:37:35.917] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.918] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.918] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.919] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.919] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.920] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.920] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.921] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.921] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.922] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.922] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.923] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.923] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.924] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.924] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.925] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.925] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.926] [WeldingTool]  | GeometryPartModule Module already exists!!!
[LOG 04:37:35.926] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.927] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.927] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.928] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.928] [WeldingTool]  | FARAeroPartModule Module already exists!!!
[LOG 04:37:35.929] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.929] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.930] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.930] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.931] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.931] [WeldingTool]  | FARPartModule Module already exists!!!
[LOG 04:37:35.932] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in prelaunch FxGroups
[LOG 04:37:35.933] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in activate FxGroups
[LOG 04:37:35.933] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in active FxGroups
[LOG 04:37:35.934] [WeldingTool]  ..Config dmDAN has 0 FXEmitters and 0 Sound in deactivate FxGroups
[LOG 04:37:35.934] [WeldingTool]  .Part dmDAN has 0 Stack attach node(s)
[LOG 04:37:35.935] [WeldingTool]  .. VesselType - Debris
[LOG 04:37:35.935] [WeldingTool]  AdvDebug(.New Center of Mass: (0.0, 0.0, 0.0)
[LOG 04:37:35.936] [WeldingTool] Welding this part: rpwsAnt
[LOG 04:37:35.936] [WeldingTool]  ..part rescaleFactor 1.10
[LOG 04:37:35.937] [WeldingTool]  ..part scaleFactor 1.00
[LOG 04:37:35.938] [WeldingTool]  .Found 1 config files
[LOG 04:37:35.939] [WeldingTool]  ..Config rpwsAnt has 1 MODEL node
[LOG 04:37:35.939] [WeldingTool]  ..MODEL url: DMagicOrbitalScience/ProbeScience/RPWS/modelRPWS
[LOG 04:37:35.940] [WeldingTool]  ..node.HasValue("position") False
[LOG 04:37:35.940] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 04:37:35.941] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 04:37:35.941] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 04:37:35.942] [WeldingTool]  ..node.HasValue("scale") True
[LOG 04:37:35.942] [WeldingTool]  ..node scale 1, 1, 1
[LOG 04:37:35.943] [WeldingTool]  ..Childs count 1
[LOG 04:37:35.943] [WeldingTool]  ..newpart position (-0.350, 15.094, 0.607)
[LOG 04:37:35.944] [WeldingTool]  ..newpart rotation (0.000, 0.707, -0.707, 0.000)
[LOG 04:37:35.944] [WeldingTool]  ..newpart rotation.eulerAngles (90.000, 180.000, 0.000)
[LOG 04:37:35.945] [WeldingTool]  ..newpart rotation.localEulerAngles (90.000, 180.000, 0.000)
[LOG 04:37:35.946] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 04:37:35.946] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 04:37:35.947] [WeldingTool]  ..position (-0.350, 0.094, 0.607)
[LOG 04:37:35.947] [WeldingTool]  ..rotation (90.000, 180.000, 0.000)
[LOG 04:37:35.948] [WeldingTool]  ..scale (1.100, 1.100, 1.100)
[LOG 04:37:35.948] [WeldingTool]  ..Config rpwsAnt has 0 RESOURCE node
[LOG 04:37:35.949] [WeldingTool]  ..Config rpwsAnt has 9 MODULE node
[LOG 04:37:35.949] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 04:37:35.950] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.950] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.951] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.951] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.952] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.952] [WeldingTool]  | Module ready to add = True
[LOG 04:37:35.953] [WeldingTool]  | DMModuleScienceAnimate Module already exists!!!
[LOG 04:37:35.954] [WeldingTool]  | BreakingAttributes found = 0 
[LOG 04:37:35.955] [WeldingTool]  | DMModuleScienceAnimate - name is string
[LOG 04:37:35.955] [WeldingTool]  | DMModuleScienceAnimate - name is merged with value DMModuleScienceAnimate
[LOG 04:37:35.956] [WeldingTool]  | DMModuleScienceAnimate - animationName is string
[LOG 04:37:35.956] [WeldingTool]  | DMModuleScienceAnimate - animationName is merged with value rpwsAnimation
[LOG 04:37:35.957] [WeldingTool]  | DMModuleScienceAnimate - experimentID is string
[LOG 04:37:35.957] [WeldingTool]  | DMModuleScienceAnimate - experimentID is merged with value rpwsScan
[LOG 04:37:35.958] [WeldingTool]  | DMModuleScienceAnimate - experimentActionName is string
[LOG 04:37:35.959] [WeldingTool]  | DMModuleScienceAnimate - experimentActionName is merged with value Log Radio Plasma Wave Data
[LOG 04:37:35.959] [WeldingTool]  | DMModuleScienceAnimate - resetActionName is string
[LOG 04:37:35.960] [WeldingTool]  | DMModuleScienceAnimate - resetActionName is merged with value Discard Data
[LOG 04:37:35.960] [WeldingTool]  | DMModuleScienceAnimate - customFailMessage is string
[LOG 04:37:35.961] [WeldingTool]  | DMModuleScienceAnimate - customFailMessage is merged with value The RPWS Antenna is not suitable for atmospheric use or surface deployment, try again in space.
[LOG 04:37:35.962] [WeldingTool]  | DMModuleScienceAnimate - deployingMessage is string
[LOG 04:37:35.963] [WeldingTool]  | DMModuleScienceAnimate - deployingMessage is merged with value With the antennae retracted the sensors can't read anything, deploying the system now.
[LOG 04:37:35.963] [WeldingTool]  | DMModuleScienceAnimate - experimentAnimation is bool
[LOG 04:37:35.964] [WeldingTool]  | DMModuleScienceAnimate - experimentAnimation is merged with value True
[LOG 04:37:35.965] [WeldingTool]  | DMModuleScienceAnimate - experimentWaitForAnimation is bool
[LOG 04:37:35.965] [WeldingTool]  | DMModuleScienceAnimate - experimentWaitForAnimation is merged with value True
[LOG 04:37:35.966] [WeldingTool]  | DMModuleScienceAnimate - keepDeployedMode is float
[LOG 04:37:35.966] [WeldingTool]  | DMModuleScienceAnimate - newValue - keepDeployedMode = 2
[LOG 04:37:35.967] [WeldingTool]  | DMModuleScienceAnimate - setNewValue - keepDeployedMode = 2
[LOG 04:37:35.968] [WeldingTool]  | DMModuleScienceAnimate - keepDeployedMode is merged with value 2
[LOG 04:37:35.968] [WeldingTool]  | DMModuleScienceAnimate - animSpeed is float
[LOG 04:37:35.969] [WeldingTool]  | DMModuleScienceAnimate - newValue - animSpeed = 1.5
[LOG 04:37:35.969] [WeldingTool]  | DMModuleScienceAnimate - setNewValue - animSpeed = 1.5
[LOG 04:37:35.970] [WeldingTool]  | DMModuleScienceAnimate - animSpeed is merged with value 1.5
[LOG 04:37:35.970] [WeldingTool]  | DMModuleScienceAnimate - showEndEvent is bool
[LOG 04:37:35.971] [WeldingTool]  | DMModuleScienceAnimate - showEndEvent is merged with value False
[LOG 04:37:35.972] [WeldingTool]  | DMModuleScienceAnimate - showStartEvent is bool
[LOG 04:37:35.972] [WeldingTool]  | DMModuleScienceAnimate - showStartEvent is merged with value True
[LOG 04:37:35.973] [WeldingTool]  | DMModuleScienceAnimate - showToggleEvent is bool
[LOG 04:37:35.973] [WeldingTool]  | DMModuleScienceAnimate - showToggleEvent is merged with value True
[LOG 04:37:35.974] [WeldingTool]  | DMModuleScienceAnimate - startEventGUIName is string
[LOG 04:37:35.974] [WeldingTool]  | DMModuleScienceAnimate - startEventGUIName is merged with value Deploy RPWS
[LOG 04:37:35.975] [WeldingTool]  | DMModuleScienceAnimate - endEventGUIName is string
[LOG 04:37:35.976] [WeldingTool]  | DMModuleScienceAnimate - endEventGUIName is merged with value Retract RPWS
[LOG 04:37:35.976] [WeldingTool]  | DMModuleScienceAnimate - toggleEventGUIName is string
[LOG 04:37:35.977] [WeldingTool]  | DMModuleScienceAnimate - toggleEventGUIName is merged with value Toggle RPWS
[LOG 04:37:35.978] [WeldingTool]  | DMModuleScienceAnimate - useStaging is bool
[LOG 04:37:35.978] [WeldingTool]  | DMModuleScienceAnimate - useStaging is merged with value False
[LOG 04:37:35.979] [WeldingTool]  | DMModuleScienceAnimate - useActionGroups is bool
[LOG 04:37:35.979] [WeldingTool]  | DMModuleScienceAnimate - useActionGroups is merged with value True
[LOG 04:37:35.980] [WeldingTool]  | DMModuleScienceAnimate - hideUIwhenUnavailable is bool
[LOG 04:37:35.980] [WeldingTool]  | DMModuleScienceAnimate - hideUIwhenUnavailable is merged with value False
[LOG 04:37:35.981] [WeldingTool]  | DMModuleScienceAnimate - rerunnable is bool
[LOG 04:37:35.982] [WeldingTool]  | DMModuleScienceAnimate - rerunnable is merged with value True
[LOG 04:37:35.982] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar is float
[LOG 04:37:35.983] [WeldingTool]  | DMModuleScienceAnimate - newValue - xmitDataScalar = 1
[LOG 04:37:35.983] [WeldingTool]  | DMModuleScienceAnimate - existingValue - xmitDataScalar = 1
[LOG 04:37:35.984] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar - added
[LOG 04:37:35.984] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar is merged with value 2
[LOG 04:37:35.985] [WeldingTool]  | DMModuleScienceAnimate - dataIsCollectable is bool
[LOG 04:37:35.986] [WeldingTool]  | DMModuleScienceAnimate - dataIsCollectable is merged with value True
[LOG 04:37:35.986] [WeldingTool]  | DMModuleScienceAnimate - collectActionName is string
[LOG 04:37:35.987] [WeldingTool]  | DMModuleScienceAnimate - collectActionName is merged with value Take Data
[LOG 04:37:35.987] [WeldingTool]  | DMModuleScienceAnimate - interactionRange is float
[LOG 04:37:35.988] [WeldingTool]  | DMModuleScienceAnimate - newValue - interactionRange = 1.2
[LOG 04:37:35.989] [WeldingTool]  | DMModuleScienceAnimate - existingValue - interactionRange = 1.8
[LOG 04:37:35.989] [WeldingTool]  | DMModuleScienceAnimate - interactionRange - added
[LOG 04:37:35.990] [WeldingTool]  | DMModuleScienceAnimate - interactionRange is merged with value 3
[LOG 04:37:35.990] [WeldingTool]  | DMModuleScienceAnimate - externalDeploy is bool
[LOG 04:37:35.991] [WeldingTool]  | DMModuleScienceAnimate - externalDeploy is merged with value True
[LOG 04:37:35.992] [WeldingTool]  | DMModuleScienceAnimate - usageReqMaskExternal is float
[LOG 04:37:35.992] [WeldingTool]  | DMModuleScienceAnimate - newValue - usageReqMaskExternal = 8
[LOG 04:37:35.993] [WeldingTool]  | DMModuleScienceAnimate - existingValue - usageReqMaskExternal = 8
[LOG 04:37:35.993] [WeldingTool]  | DMModuleScienceAnimate - usageReqMaskExternal - added
[LOG 04:37:35.994] [WeldingTool]  | DMModuleScienceAnimate - usageReqMaskExternal is merged with value 16
[LOG 04:37:35.995] [WeldingTool]  | DMModuleScienceAnimate - sitMask is float
[LOG 04:37:35.995] [WeldingTool]  | DMModuleScienceAnimate - newValue - sitMask = 48
[LOG 04:37:35.996] [WeldingTool]  | DMModuleScienceAnimate - existingValue - sitMask = 1
[LOG 04:37:35.996] [WeldingTool]  | DMModuleScienceAnimate - sitMask - added
[LOG 04:37:35.997] [WeldingTool]  | DMModuleScienceAnimate - sitMask is merged with value 49
[LOG 04:37:35.997] [WeldingTool]  | DMModuleScienceAnimate - bioMask is float
[LOG 04:37:35.998] [WeldingTool]  | DMModuleScienceAnimate - newValue - bioMask = 0
[LOG 04:37:35.998] [WeldingTool]  | DMModuleScienceAnimate - existingValue - bioMask = 1
[LOG 04:37:35.999] [WeldingTool]  | DMModuleScienceAnimate - bioMask - added
[LOG 04:37:35.999] [WeldingTool]  | DMModuleScienceAnimate - bioMask is merged with value 1
[LOG 04:37:36.000] [WeldingTool]  | DMModuleScienceAnimate - waitForAnimationTime is float
[EXC 04:37:36.001] ArgumentNullException: Argument cannot be null.
Parameter name: s
	System.Double.Parse (System.String s, NumberStyles style, IFormatProvider provider)
	System.Single.Parse (System.String s)
	UbioWeldingLtd.ModuleMerger.mergeModuleFloatValues (System.String newModuleName, .ConfigNode newModule, .ConfigNode existingNewModule, System.String ModuleAttribute, Boolean advancedDebugging)
	UbioWeldingLtd.ModuleMerger.mergeModuleAttributes (System.String newModuleName, .ConfigNode newModule, .ConfigNode existingNewModule, Boolean advancedDebugging)
	UbioWeldingLtd.ModuleMerger.mergeModules (System.String partname, .UrlConfig configuration, System.Collections.Generic.List`1 modulelist, Boolean advancedDebugging)
	UbioWeldingLtd.Welder.weldThisPart (.Part newpart)
	UbioWeldingLtd.UbioZurWeldingLtd.weldPart (.Part partToWeld)
	UbioWeldingLtd.UbioZurWeldingLtd.OnMainWindow (Int32 windowID)
	UnityEngine.GUI.CallWindowDelegate (UnityEngine.WindowFunction func, Int32 id, UnityEngine.GUISkin _skin, Int32 forceRect, Single width, Single height, UnityEngine.GUIStyle style)

Thanks for the log, I get onto it.

Ah it is a science part, but not recognized as that.

try adding it into the breakingattributes. use "DMModuleScienceAnimate_experimentID" as a new netry in the "BreakingModuleAttributes" in the "moduleAttributeList.XML" config file of UbioWeldingLtd.

That should solve it, if not please Report back.

Edited May 29, 2015 by Alewx

Elendiar · May 29, 2015

Alewx, have an issue. When i load game, weld craft, restart game and try launch, i got broken physics on launchpad (no sas or pilot message, levitation). But if i start game, reload database ingame, weld craft, everything is ok.

Alewx · May 29, 2015

Alewx, have an issue. When i load game, weld craft, restart game and try launch, i got broken physics on launchpad (no sas or pilot message, levitation). But if i start game, reload database ingame, weld craft, everything is ok.

Please provide a link with download for the craft, and also a list of the used mods.

ICirceI · May 29, 2015

Thanks for the log, I get onto it.
Ah it is a science part, but not recognized as that.
try adding it into the breakingattributes. use "DMModuleScienceAnimate_experimentID" as a new netry in the "BreakingModuleAttributes" in the "moduleAttributeList.XML" config file of UbioWeldingLtd.
That should solve it, if not please Report back.

It seems to have worked. Thanks.

Alewx · May 29, 2015

It seems to have worked. Thanks.

That is good to hear.

May 29, 2015

Alex is the dev version available for 1.0 I can't seem to find it?

I have found it my apologies.

17 FPS jumped to 20 a few times. Looking good. No promises on the engines it was doing something funky.

This is one part.

Edited May 29, 2015 by Space Cowboy

cy-one · May 29, 2015

Is it still the case that all welded parts are at the end of the career tree? Or how is that "problem" solved in Alewx 2.1.3?

curiousepic · May 29, 2015

Is there a known reason some mod parts (from Near Future Construction) are not retaining their Tweakscale scale in the weldment?

EDIT: I just realized I personally added the TweakScale module to these parts via a MM.cfg. Would that be why?

Edited May 29, 2015 by curiousepic

iDisOrder · May 29, 2015

Please excuse me for not reading back 33 pages of this thread, but is there a working version available for 1.0.2?

ICirceI · May 29, 2015

You get a dropdown list of required tech to assign to the welded part. The list seems to be inherited from the parent parts.

May 29, 2015

Please excuse me for not reading back 33 pages of this thread, but is there a working version available for 1.0.2?

https://github.com/UbioWeldingLtd/UbioWeldContinued/blob/dev-1.0/UbioWeldContinued-2.1.3.zip

Click View RAW

iDisOrder · May 30, 2015

https://github.com/UbioWeldingLtd/UbioWeldContinued/blob/dev-1.0/UbioWeldContinued-2.1.3.zip
Click View RAW

ThankYouVeryMuch!

[1.4.*] [2.5.3] (2018-04-06) UbioZur Welding Ltd. Continued

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Guest Space Cowboy

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Guest Space Cowboy

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation