amarius1

[1.3.0][Kopernicus]Kerbol Origins v.0.4.7 - biome science!

306 posts in this topic

On 3/17/2017 at 0:22 PM, Kuldaralagh said:

Hey guys, I loved the mod, but was very disappointed when I flew all the way to Savin for science and found out there was so little of it there.

so I found this out.

ScienceValues
            {
                flyingLowDataValue = 1
                flyingHighDataValue = 1
                inSpaceLowDataValue = 1
                inSpaceHighDataValue = 1
                recoveryValue = 1
                flyingAltitudeThreshold = 150000
                spaceAltitudeThreshold = 5000000
            }

is this correct? 

I mean, aren´t those ones supposed to be 10s or something.

 

its quite a bummer to do a 30 minute burn just to find out you could get more science on kerbin

Well I am very sorry friend... Did you happen to do it over Sarvin? I will release an update right away.

Share this post


Link to post
Share on other sites

EDIT: released a hotfix for the science values!

Share this post


Link to post
Share on other sites
On 3/19/2017 at 2:03 PM, amarius1 said:

Well I am very sorry friend... Did you happen to do it over Sarvin? I will release an update right away.

Hey, no biggie, really.

I was disappointed, but them started a fresh save with Strategia and Kerbol Origins. that is gonna take me a looong time.

that and for some reason I have an unstable mod collection that crashes my game quite often, really, the lack of science was a small problem.

 

besides, it made me learn a bit of kopernicus to find out what was wrong, and I found it. so win!

Share this post


Link to post
Share on other sites

and yes, that was sarvin

1 person likes this

Share this post


Link to post
Share on other sites
14 hours ago, Kuldaralagh said:

and yes, that was sarvin

Already fixed in the last patch i made on that day :)

Share this post


Link to post
Share on other sites

About the biomes: the colors are still specified incorrectly in the cfg files. For example, in Sarvin.cfg, the entry for "Equatorial Cloud Belt" says "color = 0.192,0.043,0.043,1". The color in the image file is (192, 43, 43), so you need to divide by 255 to get (0.753, 0.169, 0.169). Changing the line to "color = 0.753,0.169,0.169,1" (and similarly for all the other biomes) makes it work just fine.

There also appear to be a few typos. The color for "Northern Temperate Cloud Belt" is given as (0.255, 0.152, 0.056) but in fact the red component is 225, not 255. There are a few other entries like that. Something else odd is going on with Fonso, because there are five biomes in the cfg, but seven distinct colors in the image.

I could post the corrections I've made (after I finish making them). My cfg files are out of date though, because I'm using an older version of the mod. Perhaps I should just post the corrected biome listings? Also, my corrected version of Fonso.cfg works, but it's probably not what you guys intended (five biomes instead of seven).

Share this post


Link to post
Share on other sites

Do planetary bodies have all of their biomes now?

Share this post


Link to post
Share on other sites

Posted (edited)

Welp, here's my fix for the biomes. For each body, go to the cfg file and replace the contents of the Biomes node with what I give below. Some bodies may not end up exactly as the creators intended, but this at least works and gives them multiple biomes to get science from. I apologize for any typos and for the changes I made to Fonso and Manai.

Faz:

Spoiler


                Biome
                {
                    name = Sandy_Pains
                    value = 5.0
                    color = 0.082,0.192,0.251,1
                }
                Biome
                {
                    name = Lowlands
                    value = 6.0
                    color = 0.188,0.314,0.145,1
                }
                Biome
                {
                    name = Midlands
                    value = 7.0
                    color = 0.541,0.510,0.133,1
                }
                 Biome
                {
                    name = Highlands
                    value = 8.0
                    color = 0.729,0.463,0.176,1
                }
                 Biome
                {
                    name = Peaks
                    value = 10.0
                    color = 0.659,0.224,0.220,1
                }

 

Harvest:

Spoiler


                Biome
                {
                    name = Plains
                    value = 1.0
                    color = 0.063,0.129,0.208,1
                }
                Biome
                {
                    name = Lowlands
                    value = 2.0
                    color = 0.157,0.267,0.082,1
                }
                Biome
                {
                    name = Midlands
                    value = 3.0
                    color = 0.596,0.565,0,1
                }
                 Biome
                {
                    name = Highlands
                    value = 4.0
                    color = 0.604,0.384,0.145,1
                }
                 Biome
                {
                    name = Peaks
                    value = 5.0
                    color = 0.659,0.067,0.02,1
                }

 

Rega:

Spoiler


                Biome
                {
                    name = Plains3
                    value = 0.4
                    color = 0.051,0.047,0.157,1
                }
                Biome
                {
                    name = Plains2
                    value = 0.5
                    color = 0.094,0.173,0.345,1
                }
                Biome
                {
                    name = Plains
                    value = 1.0
                    color = 0.094,0.286,0.063,1
                }
                Biome
                {
                    name = Lowlands
                    value = 1.5
                    color = 0.322,0.584,0.125,1
                }
                Biome
                {
                    name = Midlands
                    value = 2.0
                    color = 0.816,0.8,0.251,1
                }
                 Biome
                {
                    name = Highlands
                    value = 2.5
                    color = 0.867,0.478,0.133,1
                }
                 Biome
                {
                    name = Peaks
                    value = 3.0
                    color = 0.667,0.133,0.133,1
                }

 

Keelon:

Spoiler


                Biome
                {
                    name = Sandy_Pains
                    value = 5.0
                    color = 0.196,0.255,0.376,1
                }
                Biome
                {
                    name = Lowlands
                    value = 6.0
                    color = 0.145,0.361,0.063,1
                }
                Biome
                {
                    name = Midlands
                    value = 7.0
                    color = 0.741,0.729,0.145,1
                }
                 Biome
                {
                    name = Highlands
                    value = 8.0
                    color = 0.824,0.506,0.114,1
                }
                 Biome
                {
                    name = Peaks
                    value = 10.0
                    color = 0.753,0.192,0.188,1
                }

 

Manai was pretty messed up. The cfg file doesn't seem to be talking about the same colors that are in the biome map at all. So I took some liberties and came up with this:

Spoiler


                Biome
                {
                    name = Lava Sea Deeps
                    value = 12.0
                    color = 0.082,0.149,0.227,1
                }
                Biome
                {
                    name = Lava Sea Shelf
                    value = 12.0
                    color = 0.071,0.102,0.188,1
                }
                Biome
                {
                    name = Fiery Beaches
                    value = 6.0
                    color = 0.082,0.251,0.114,1
                }
                Biome
                {
                    name = Lowlands
                    value = 4.0
                    color = 0.835,0.714,0.208,1
                }
                Biome
                {
                    name = Midlands
                    value = 2.0
                    color = 0.098,0.204,0.077,1
                }
                Biome
                {
                    name = Highlands
                    value = 1.0
                    color = 0.824,0.537,0.220,1
                }

 

Revus:

Spoiler


                Biome
                {
                    name = Inferior_Ice_Plains
                    value = 0.4
                    color = 0.039,0.063,0.125,1
                }
                Biome
                {
                    name = Superior_Ice_Plains
                    value = 0.5
                    color = 0.102,0.188,0.314,1
                }
                Biome
                {
                    name = Ice_Plains
                    value = 1.0
                    color = 0.114,0.353,0.125,1
                }
                Biome
                {
                    name = Lowlands
                    value = 1.5
                    color = 0.416,0.627,0.125,1
                }
                Biome
                {
                    name = Midlands
                    value = 2.0
                    color = 0.847,0.729,0.220,1
                }
                 Biome
                {
                    name = Highlands
                    value = 2.5
                    color = 0.973,0.463,0.063,1
                }
                 Biome
                {
                    name = Peaks
                    value = 3.0
                    color = 0.918,0.078,0.082,1
                }

 

Daphy:

Spoiler


                Biome
                {
                    name = Hardened_Fluff_Plains
                    value = 6.0
                    color = 0.102,0.337,0.165,1
                }
                Biome
                {
                    name = Ice_Plains
                    value = 5.0
                    color = 0.659,0.584,0.063,1
                }
                Biome
                {
                    name = Midlands
                    value = 3.0
                    color = 0.741,0.408,0.188,1
                }
                 Biome
                {
                    name = Highlands
                    value = 2.0
                    color = 0.761,0.180,0.174,1
                }

 

Fonso was a bit messed up, as I mentioned before. There are seven colors in the biome map but only five in the cfg file. So again, I took liberties:

Spoiler


                Biome
                {
                    name = Sandy_Plains
                    value = 6.0
                    color = 0.071,0.188,0.259,1
                }
                Biome
                {
                    name = Plains
                    value = 5.0
                    color = 0.125,0.322,0.447,1
                }
                Biome
                {
                    name = Lowlands
                    value = 5.0
                    color = 0.082,0.302,0.176,1
                }
                Biome
                {
                    name = Midlands
                    value = 4.0
                    color = 0.133,0.49,0.227,1
                }
                Biome
                {
                    name = Gray Highlands
                    value = 6.0
                    color = 0.596,0.537,0.125,1
                }
                Biome
                {
                    name = White Highlands
                    value = 7.0
                    color = 0.635,0.380,0.220,1
                }
                 Biome
                {
                    name = White Peaks
                    value = 12.0
                    color = 0.729,0.149,0.145,1
                }

 

Potatus:

Spoiler


                 Biome
                {
                    name = Craters
                    value = 6.0
                    color = 0.102,0.141,0.314,1
                }
                Biome
                {
                    name = Lowlands
                    value = 6.0
                    color = 0.157,0.227,0.051,1
                }
                Biome
                {
                    name = Midlands
                    value = 5.0
                    color = 0.659,0.584,0.165,1
                }
                Biome
                {
                    name = Highlands
                    value = 3.0
                    color = 0.69,0.4,0.063,1
                }
                 Biome
                {
                    name = Peaks
                    value = 2.0
                    color = 0.867,0.149,0.102,1
                }

 

Sarvin:

Spoiler


                Biome
                {
                    name = Equatorial Cloud Belt
                    value = 1.0
                    color = 0.753,0.169,0.169,1
                }
                Biome
                {
                    name = Northern Temperate Cloud Belt
                    value = 1.0
                    color = 0.882,0.596,0.220,1
                }
                Biome
                {
                    name = Southern Temperate Cloud Belt
                    value = 1.0
                    color = 0.863,0.420,0.231,1
                }
                Biome
                {
                    name = Superior Cloud Belt
                    value = 1.0
                    color = 0.824,0.729,0.341,1
                }
                Biome
                {
                    name = Kluhon Gas Clouds
                    value = 1.0
                    color = 0.510,0.663,0.329,1
                }
                Biome
                {
                    name = Northern Subpolar Cloud Belt
                    value = 1.0
                    color = 0.271,0.604,0.604,1
                }
                Biome
                {
                    name = Southern Polar Cloud Belt
                    value = 1.0
                    color = 0.306,0.431,0.612,1
                }
                Biome
                {
                    name = Northern Polar Cloud Belt
                    value = 1.0
                    color = 0.263,0.431,0.612,1
                }
                Biome
                {
                    name = Polar Gas Clouds
                    value = 1.0
                    color = 0.447,0.318,0.714,1
                }
                Biome
                {
                    name = Aramnum Gas Clouds
                    value = 1.0
                    color = 1,1,1,1
                }
                Biome
                {
                    name = Southern Polar Cloud Belt
                    value = 1.0
                    color = 0.306,0.576,0.741,1
                }
                Biome
                {
                    name = Great Storms
                    value = 1.0
                    color = 0.6,0.631,1,1
                }

 

Shayle:

Spoiler


                Biome
                {
                    name = Ice_Plains
                    value = 3.0
                    color = 0.039,0.086,0.133,1
                }
                Biome
                {
                    name = Lowlands
                    value = 4.0
                    color = 0.114,0.192,0.063,1
                }
                Biome
                {
                    name = Midlands
                    value = 5.0
                    color = 0.824,0.729,0,1
                }
                Biome
                {
                    name = Icy_Highlands
                    value = 6.0
                    color = 0.698,0.329,0,1
                }
                 Biome
                {
                    name = Peaks
                    value = 7.0
                    color = 0.553,0.165,0.165,1
                }

 

Edited by kjgoebel
1 person likes this

Share this post


Link to post
Share on other sites

Posted (edited)

Is it possible to add an option to move stock objects back to their original orbits (like Eeloo back to its original orbit)? I guess some people don't like it.

Also, the start menu texts appear behind Sarvin's rings.

Edited by Hypercosmic

Share this post


Link to post
Share on other sites
1 hour ago, Hypercosmic said:

Is it possible to add an option to move stock objects back to their original orbits (like Eeloo back to its original orbit)? I guess some people don't like it.

You can leave Eeloo where it is by removing the Eeloo folder from KerbolOrigins/SarvinSystem.

Share this post


Link to post
Share on other sites

Posted (edited)

On 3/28/2017 at 1:54 PM, kjgoebel said:

You can leave Eeloo where it is by removing the Eeloo folder from KerbolOrigins/SarvinSystem.

It won't break the game, right?

Also, I strongly suggest you to put all of your stuffs above my first comment into a spoiler. Preferably, separate each object into each box as well.

Edited by Hypercosmic
GRAMMAR >:(
1 person likes this

Share this post


Link to post
Share on other sites
1 minute ago, Hypercosmic said:

It won't breaking the game, right?

Just tried it. Doesn't seem to break anything. As I understand it, the directory structure of Kerbol Origins is such that you can delete any part of it that you don't want, and it should work fine.

Hmmmmm. I wonder what happens if you delete Sarvin without deleting any of Sarvin's moons........ Ah. Don't do that. But just deleting Eeloo is fine.

2 people like this

Share this post


Link to post
Share on other sites
On 3/28/2017 at 8:22 AM, kjgoebel said:

Welp, here's my fix for the biomes. For each body, go to the cfg file and replace the contents of the Biomes node with what I give below. Some bodies may not end up exactly as the creators intended, but this at least works and gives them multiple biomes to get science from. I apologize for any typos and for the changes I made to Fonso and Manai.

Faz:

  Reveal hidden contents


                Biome
                {
                    name = Sandy_Pains
                    value = 5.0
                    color = 0.082,0.192,0.251,1
                }
                Biome
                {
                    name = Lowlands
                    value = 6.0
                    color = 0.188,0.314,0.145,1
                }
                Biome
                {
                    name = Midlands
                    value = 7.0
                    color = 0.541,0.510,0.133,1
                }
                 Biome
                {
                    name = Highlands
                    value = 8.0
                    color = 0.729,0.463,0.176,1
                }
                 Biome
                {
                    name = Peaks
                    value = 10.0
                    color = 0.659,0.224,0.220,1
                }

 

Harvest:

  Reveal hidden contents


                Biome
                {
                    name = Plains
                    value = 1.0
                    color = 0.063,0.129,0.208,1
                }
                Biome
                {
                    name = Lowlands
                    value = 2.0
                    color = 0.157,0.267,0.082,1
                }
                Biome
                {
                    name = Midlands
                    value = 3.0
                    color = 0.596,0.565,0,1
                }
                 Biome
                {
                    name = Highlands
                    value = 4.0
                    color = 0.604,0.384,0.145,1
                }
                 Biome
                {
                    name = Peaks
                    value = 5.0
                    color = 0.659,0.067,0.02,1
                }

 

Rega:

  Reveal hidden contents


                Biome
                {
                    name = Plains3
                    value = 0.4
                    color = 0.051,0.047,0.157,1
                }
                Biome
                {
                    name = Plains2
                    value = 0.5
                    color = 0.094,0.173,0.345,1
                }
                Biome
                {
                    name = Plains
                    value = 1.0
                    color = 0.094,0.286,0.063,1
                }
                Biome
                {
                    name = Lowlands
                    value = 1.5
                    color = 0.322,0.584,0.125,1
                }
                Biome
                {
                    name = Midlands
                    value = 2.0
                    color = 0.816,0.8,0.251,1
                }
                 Biome
                {
                    name = Highlands
                    value = 2.5
                    color = 0.867,0.478,0.133,1
                }
                 Biome
                {
                    name = Peaks
                    value = 3.0
                    color = 0.667,0.133,0.133,1
                }

 

Keelon:

  Reveal hidden contents


                Biome
                {
                    name = Sandy_Pains
                    value = 5.0
                    color = 0.196,0.255,0.376,1
                }
                Biome
                {
                    name = Lowlands
                    value = 6.0
                    color = 0.145,0.361,0.063,1
                }
                Biome
                {
                    name = Midlands
                    value = 7.0
                    color = 0.741,0.729,0.145,1
                }
                 Biome
                {
                    name = Highlands
                    value = 8.0
                    color = 0.824,0.506,0.114,1
                }
                 Biome
                {
                    name = Peaks
                    value = 10.0
                    color = 0.753,0.192,0.188,1
                }

 

Manai was pretty messed up. The cfg file doesn't seem to be talking about the same colors that are in the biome map at all. So I took some liberties and came up with this:

  Reveal hidden contents


                Biome
                {
                    name = Lava Sea Deeps
                    value = 12.0
                    color = 0.082,0.149,0.227,1
                }
                Biome
                {
                    name = Lava Sea Shelf
                    value = 12.0
                    color = 0.071,0.102,0.188,1
                }
                Biome
                {
                    name = Fiery Beaches
                    value = 6.0
                    color = 0.082,0.251,0.114,1
                }
                Biome
                {
                    name = Lowlands
                    value = 4.0
                    color = 0.835,0.714,0.208,1
                }
                Biome
                {
                    name = Midlands
                    value = 2.0
                    color = 0.098,0.204,0.077,1
                }
                Biome
                {
                    name = Highlands
                    value = 1.0
                    color = 0.824,0.537,0.220,1
                }

 

Revus:

  Reveal hidden contents


                Biome
                {
                    name = Inferior_Ice_Plains
                    value = 0.4
                    color = 0.039,0.063,0.125,1
                }
                Biome
                {
                    name = Superior_Ice_Plains
                    value = 0.5
                    color = 0.102,0.188,0.314,1
                }
                Biome
                {
                    name = Ice_Plains
                    value = 1.0
                    color = 0.114,0.353,0.125,1
                }
                Biome
                {
                    name = Lowlands
                    value = 1.5
                    color = 0.416,0.627,0.125,1
                }
                Biome
                {
                    name = Midlands
                    value = 2.0
                    color = 0.847,0.729,0.220,1
                }
                 Biome
                {
                    name = Highlands
                    value = 2.5
                    color = 0.973,0.463,0.063,1
                }
                 Biome
                {
                    name = Peaks
                    value = 3.0
                    color = 0.918,0.078,0.082,1
                }

 

Daphy:

  Reveal hidden contents


                Biome
                {
                    name = Hardened_Fluff_Plains
                    value = 6.0
                    color = 0.102,0.337,0.165,1
                }
                Biome
                {
                    name = Ice_Plains
                    value = 5.0
                    color = 0.659,0.584,0.063,1
                }
                Biome
                {
                    name = Midlands
                    value = 3.0
                    color = 0.741,0.408,0.188,1
                }
                 Biome
                {
                    name = Highlands
                    value = 2.0
                    color = 0.761,0.180,0.174,1
                }

 

Fonso was a bit messed up, as I mentioned before. There are seven colors in the biome map but only five in the cfg file. So again, I took liberties:

  Reveal hidden contents


                Biome
                {
                    name = Sandy_Plains
                    value = 6.0
                    color = 0.071,0.188,0.259,1
                }
                Biome
                {
                    name = Plains
                    value = 5.0
                    color = 0.125,0.322,0.447,1
                }
                Biome
                {
                    name = Lowlands
                    value = 5.0
                    color = 0.082,0.302,0.176,1
                }
                Biome
                {
                    name = Midlands
                    value = 4.0
                    color = 0.133,0.49,0.227,1
                }
                Biome
                {
                    name = Gray Highlands
                    value = 6.0
                    color = 0.596,0.537,0.125,1
                }
                Biome
                {
                    name = White Highlands
                    value = 7.0
                    color = 0.635,0.380,0.220,1
                }
                 Biome
                {
                    name = White Peaks
                    value = 12.0
                    color = 0.729,0.149,0.145,1
                }

 

Potatus:

  Reveal hidden contents


                 Biome
                {
                    name = Craters
                    value = 6.0
                    color = 0.102,0.141,0.314,1
                }
                Biome
                {
                    name = Lowlands
                    value = 6.0
                    color = 0.157,0.227,0.051,1
                }
                Biome
                {
                    name = Midlands
                    value = 5.0
                    color = 0.659,0.584,0.165,1
                }
                Biome
                {
                    name = Highlands
                    value = 3.0
                    color = 0.69,0.4,0.063,1
                }
                 Biome
                {
                    name = Peaks
                    value = 2.0
                    color = 0.867,0.149,0.102,1
                }

 

Sarvin:

  Reveal hidden contents


                Biome
                {
                    name = Equatorial Cloud Belt
                    value = 1.0
                    color = 0.753,0.169,0.169,1
                }
                Biome
                {
                    name = Northern Temperate Cloud Belt
                    value = 1.0
                    color = 0.882,0.596,0.220,1
                }
                Biome
                {
                    name = Southern Temperate Cloud Belt
                    value = 1.0
                    color = 0.863,0.420,0.231,1
                }
                Biome
                {
                    name = Superior Cloud Belt
                    value = 1.0
                    color = 0.824,0.729,0.341,1
                }
                Biome
                {
                    name = Kluhon Gas Clouds
                    value = 1.0
                    color = 0.510,0.663,0.329,1
                }
                Biome
                {
                    name = Northern Subpolar Cloud Belt
                    value = 1.0
                    color = 0.271,0.604,0.604,1
                }
                Biome
                {
                    name = Southern Polar Cloud Belt
                    value = 1.0
                    color = 0.306,0.431,0.612,1
                }
                Biome
                {
                    name = Northern Polar Cloud Belt
                    value = 1.0
                    color = 0.263,0.431,0.612,1
                }
                Biome
                {
                    name = Polar Gas Clouds
                    value = 1.0
                    color = 0.447,0.318,0.714,1
                }
                Biome
                {
                    name = Aramnum Gas Clouds
                    value = 1.0
                    color = 1,1,1,1
                }
                Biome
                {
                    name = Southern Polar Cloud Belt
                    value = 1.0
                    color = 0.306,0.576,0.741,1
                }
                Biome
                {
                    name = Great Storms
                    value = 1.0
                    color = 0.6,0.631,1,1
                }

 

Shayle:

  Reveal hidden contents


                Biome
                {
                    name = Ice_Plains
                    value = 3.0
                    color = 0.039,0.086,0.133,1
                }
                Biome
                {
                    name = Lowlands
                    value = 4.0
                    color = 0.114,0.192,0.063,1
                }
                Biome
                {
                    name = Midlands
                    value = 5.0
                    color = 0.824,0.729,0,1
                }
                Biome
                {
                    name = Icy_Highlands
                    value = 6.0
                    color = 0.698,0.329,0,1
                }
                 Biome
                {
                    name = Peaks
                    value = 7.0
                    color = 0.553,0.165,0.165,1
                }

 

Thank you for doing this friend... If you agree, i can merge this into the next version of KO. 

 

I didn't have much time to work on this lately because of real life...

1 person likes this

Share this post


Link to post
Share on other sites
21 minutes ago, amarius1 said:

Thank you for doing this friend... If you agree, i can merge this into the next version of KO

 

I didn't have much time to work on this lately because of real life...

I felt weird about that. KO Knocked Out!

Share this post


Link to post
Share on other sites
1 hour ago, amarius1 said:

Thank you for doing this friend... If you agree, i can merge this into the next version of KO. 

 

I didn't have much time to work on this lately because of real life...

My pleasure. I'm happy to contribute.

Yeah, real life takes its toll :/

2 people like this

Share this post


Link to post
Share on other sites

Posted (edited)

I wonder why KO engines are made by Ionic...

In the wiki, it is mentioned that GP2 might be larger than Jool (9,000km). What are your ideas?

Edited by Hypercosmic

Share this post


Link to post
Share on other sites

Posted (edited)

Decided to send Jeb on a Hyperedit tour at Rega. Once I got there, the bug has been spotted in an instant. (100 km orbit)

Fonso has similar bug (visible at 100 km, but apparent below 80 km), but fades away when the ship orbits further out. I guess every objects has this kind of bug...

I think if you zoomed into any planet close enough, that planet will pixelate. Not sure if Kerbol Origins, Kerbol Enhanced or other mods.

Edited by Hypercosmic

Share this post


Link to post
Share on other sites
13 hours ago, Hypercosmic said:

Decided to send Jeb on a Hyperedit tour at Rega. Once I got there, the bug has been spotted in an instant. (100 km orbit)

Fonso has similar bug (visible at 100 km, but apparent below 80 km), but fades away when the ship orbits further out. I guess every objects has this kind of bug...

I think if you zoomed into any planet close enough, that planet will pixelate. Not sure if Kerbol Origins, Kerbol Enhanced or other mods.

I don't know the cause of this bug but it might be a Kopernicis bug not a planet pack one. I will talk with @Thomas P. about it.

1 person likes this

Share this post


Link to post
Share on other sites

Any knowledge of how this interacts with RemoteTech?  I've been having issues connecting back to Kerbin from the KO worlds, but want to confirm if it's incompatibility, kraken, or some strange design flaw with a heavy dose of coincidence.

Share this post


Link to post
Share on other sites

Alright, folks! After far too long... prepare to experience Kerbol Origins like never before!

 

3 people like this

Share this post


Link to post
Share on other sites

Posted (edited)

Wow, I've really got to try this again for all the pretty views, when will that stuff be ready Guardian?

Edited by nsgallup

Share this post


Link to post
Share on other sites
9 hours ago, The White Guardian said:

Alright, folks! After far too long... prepare to experience Kerbol Origins like never before!

 

This is outstanding!! Good job bro! Hope you get it finished soon. 

 

Also: more custom rocket parts will come, thanks to Nills, including a new command pod, I just need to finish the sketches :D

Share this post


Link to post
Share on other sites
20 hours ago, nsgallup said:

Wow, I've really got to try this again for all the pretty views, when will that stuff be ready Guardian?

I only need to add surface dust and something 'special' for Faz, then it's done.

2 people like this

Share this post


Link to post
Share on other sites
On 4/3/2017 at 4:53 PM, The White Guardian said:

I only need to add surface dust and something 'special' for Faz, then it's done.

Beautiful! Announce me when you're ready!

Share this post


Link to post
Share on other sites
On 3/30/2017 at 6:17 AM, Hypercosmic said:

Decided to send Jeb on a Hyperedit tour at Rega. Once I got there, the bug has been spotted in an instant. (100 km orbit)

Fonso has similar bug (visible at 100 km, but apparent below 80 km), but fades away when the ship orbits further out. I guess every objects has this kind of bug...

I think if you zoomed into any planet close enough, that planet will pixelate. Not sure if Kerbol Origins, Kerbol Enhanced or other mods.

This is a hyperedit bug, and it happens with pretty much all the planets. Just a way the data gets loaded in I guess. If you change instances, it should show the correct geometry.

This is not a KO issue.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now