Mr. Peabody Posted October 27, 2018 Share Posted October 27, 2018 O.K. Thanks for the info. Would it not be simpler to land and refuel on Bop or Pol before heading to Laythe? That should give you the needed DV to lower your orbit around Laythe for a safe re-entry. Link to comment Share on other sites More sharing options...
4x4cheesecake Posted October 27, 2018 Share Posted October 27, 2018 On 10/27/2018 at 12:22 AM, The Dunatian said: Would it not be simpler to land and refuel on Bop or Pol before heading to Laythe? That should give you the needed DV to lower your orbit around Laythe for a safe re-entry. Expand Depends on your shuttle, how much fuel/dV you can carry around in your orbiter and if you actually want to use an ISRU (I don't^^). Getting back into orbit after landing on laythe will still need ~2800m/s, so if your full fuel orbiter without any cargo got a dV of ~3400m/s you can still not use 1000m/s (probably more) to slow slow down into a nice low Laythe orbit or you will be stucked on laythe after landing. Well, if you can refuel on laythe again, it would be fine anyway. Link to comment Share on other sites More sharing options...
Kerbolitto Posted October 27, 2018 Share Posted October 27, 2018 On 10/27/2018 at 12:54 AM, 4x4cheesecake said: Depends on your shuttle, how much fuel/dV you can carry around in your orbiter and if you actually want to use an ISRU (I don't^^). Getting back into orbit after landing on laythe will still need ~2800m/s, so if your full fuel orbiter without any cargo got a dV of ~3400m/s you can still not use 1000m/s (probably more) to slow slow down into a nice low Laythe orbit or you will be stucked on laythe after landing. Well, if you can refuel on laythe again, it would be fine anyway. Expand Did you used Vall and Laythe to lower orbital speed in the inner Joolian system ? In my opinion the reason is that your orbit is highly elliptical, and its a pain around Jool because you have to understand that you are going extremly fast when below Vall's orbit. It's all about lowering Ap, and best way to do this is multiple flyby around. I checked my screens and I touched Laythe at 2700m/s on the first landing. Link to comment Share on other sites More sharing options...
4x4cheesecake Posted October 27, 2018 Share Posted October 27, 2018 On 10/27/2018 at 4:50 AM, Kerbolitto said: Did you used Vall and Laythe to lower orbital speed in the inner Joolian system ? Expand I used Tylo for most of my flybys to slow down but probably that's actually the mistake because I cannot lower my Ap down to Laythes orbit without my Pe disappearing within Jool. I'll try some more gentle flybys around Val, maybe it helps Link to comment Share on other sites More sharing options...
sturmhauke Posted October 27, 2018 Share Posted October 27, 2018 You definitely should practice your Joolian pinball. There are two ways to get in, around, and back out of the Jool system. One is to carry several craptons of excess dV, and the other is mastering gravity assists. Here's an example of a multistep maneuver I did on one Jool mission: Reveal hidden contents (full mission here - https://imgur.com/a/8ZSZH) 1. Trident SSSTO (that's a Seaplane SSTO) enters Jool system from the top left, along the blue solid conic 2. small course correction puts Trident on a gravity braking flyby of Tylo, starting along the purple conic on the left 3. flyby sends Trident inwards towards a low pass of Jool (slightly above its atmosphere) along the green and red conics 4. Oberth burn at Jool periapsis boosts Trident back up to a Laythe intercept along the blue and yellow conics 5. Trident performs aerobraking and capture burns at Laythe (not shown). I don't have screenshots of that, but I think the initial aerobraking velocity was under 3000 degrees - a bit hot, but manageable with Mk 2 and 3 parts Link to comment Share on other sites More sharing options...
michal.don Posted October 27, 2018 Author Share Posted October 27, 2018 On 10/26/2018 at 9:37 PM, 4x4cheesecake said: Quick question for this one: 'Deorbiting the solar/comm array' does not require to load them into the cargo bay and land them on Kerbin, does it? It is more like: put a rocket engine on it and fly it into the atmosphere? Expand Exactly. You only need to recover the hab module, the solar array can be sent to burn in the atmosphere. On 10/26/2018 at 9:37 PM, 4x4cheesecake said: Well, I'm getting tired of burning up in Laythes atmosphere Expand Regarding this - I believe that the solution is as everyone hinted - limiting the entry speed by performing a few gravity assists in the Jool system. That's pretty much the purpose of STS-3T, learning how to do those Link to comment Share on other sites More sharing options...
4x4cheesecake Posted October 27, 2018 Share Posted October 27, 2018 On 10/27/2018 at 11:45 AM, michal.don said: Exactly. You only need to recover the hab module, the solar array can be sent to burn in the atmosphere. Expand Perfekt, thanks :) On 10/27/2018 at 11:45 AM, michal.don said: I believe that the solution is as everyone hinted - limiting the entry speed by performing a few gravity assists in the Jool system. That's pretty much the purpose of STS-3T, learning how to do those Expand I had no issues during STS-3T since the huygens probe got a heatshield^^ Anyway, I'll do some more Gravity assist Training, maybe I should also actually fly to jool instead of using the debug menu to put the Orbiter into an excentric Orbit. Probably, I just used a too small SMA. Thanks everyone for the great hints :) Link to comment Share on other sites More sharing options...
hoioh Posted October 27, 2018 Share Posted October 27, 2018 On 10/27/2018 at 12:58 PM, 4x4cheesecake said: Thanks everyone for the great hints Expand Got one more for ya: On my way into the jool system I tend to dip in under Laythe to get a gravity assist capture for jool and then adjust for the final arrival at laythe Link to comment Share on other sites More sharing options...
Kerbolitto Posted October 27, 2018 Share Posted October 27, 2018 On 10/27/2018 at 12:58 PM, 4x4cheesecake said: Perfekt, thanks I had no issues during STS-3T since the huygens probe got a heatshield^^ Anyway, I'll do some more Gravity assist Training, maybe I should also actually fly to jool instead of using the debug menu to put the Orbiter into an excentric Orbit. Probably, I just used a too small SMA. Thanks everyone for the great hints Expand Also you can encounter Laythe and slightly aerobrake in the higher atmosphere during multiple times, this will lower Ap and you can capture later once your orbit is less elliptical (like my STS Eve 1). Link to comment Share on other sites More sharing options...
Petrovich Posted October 28, 2018 Share Posted October 28, 2018 Really should've checked the control surface hinges after drying them out. STS-4/STS-4R - https://imgur.com/a/FltgU4g Link to comment Share on other sites More sharing options...
michal.don Posted October 30, 2018 Author Share Posted October 30, 2018 On 10/28/2018 at 9:21 PM, Petrovich said: STS-4/STS-4R Expand Nice rescue mission, even with the improvised launch vehicle Just curious, where is the airfield the crew "accidentally" landed? Which mod does that? I enjoyed the report, good job, and here's your badge: Michal.don Link to comment Share on other sites More sharing options...
Petrovich Posted October 31, 2018 Share Posted October 31, 2018 On 10/30/2018 at 9:44 AM, michal.don said: Nice rescue mission, even with the improvised launch vehicle Expand Thank you. Something to spice things up! On 10/30/2018 at 9:44 AM, michal.don said: Just curious, where is the airfield the crew "accidentally" landed? Which mod does that? Expand KerbinSide Remastered, landed at "Baikerbanor Space Center" hence the Buran-style shuttle Looks like the Krussians have some 'splainin to do. Link to comment Share on other sites More sharing options...
Ozelui Posted November 1, 2018 Share Posted November 1, 2018 We choose to go to Mun, not because it's easy, but because michal.don tells us to do so! (And because of the badges!) Not much time for KSP lately, RL gets in the way whenever I try to build something . Fortunately the only meaningful change to the shuttle for this mission was emptying some OMS tanks. Other than that, I added a couple of solar panels and fuel cells just in case, and replaced the DTS-M1 antenna for a HG-5 to look closer to the real thing: About the reentry, the Dessert airfield or the KSC were too far behind my re-entry point so I went the long way around. The altitude profile is pretty much the same as a skip re-entry (see below), just not leaving the atmosphere at any time: STS-5T report here Craft file here Reveal hidden contents Mod list, however the ship is stock+DLC, no modded parts involved. Link to comment Share on other sites More sharing options...
michal.don Posted November 1, 2018 Author Share Posted November 1, 2018 On 11/1/2018 at 8:28 AM, Ozelui said: We choose to go to Mun, not because it's easy, but because michal.don tells us to do so! Expand I love this And I'm very glad to see the first one to come to claim the new badge Your entry sure counts, great gliding capacity and a pinpoint landing, I'll probably never grow tired of seeing those. Good job! And the Eagle landing spot is just right, too Congratulations on being the first 5-level-certified test pilot! So I should design the new mission now.... Michal.don Link to comment Share on other sites More sharing options...
4x4cheesecake Posted November 2, 2018 Share Posted November 2, 2018 So, while working on the final payload design for my Jool STS - 1, I came across a little problem: Reveal hidden contents The blurred part contains my atmospheric exploration aircraft, I just don't want to spoil the design already As you can see, the remaining space in the cargo bay is pretty small to fit in a surface outpost but I have some space left below the aircraft....so am I allowed to split the outpost in multiple modules, assemble them in low laythe orbit and put the whole outpost back into the cargo bay to land it on laythe? Obviously, I need to get rid of the aircraft before I can do this but that's fine with the rules so far Link to comment Share on other sites More sharing options...
Kerbolitto Posted November 2, 2018 Share Posted November 2, 2018 On 11/2/2018 at 4:28 PM, 4x4cheesecake said: So, while working on the final payload design for my Jool STS - 1, I came across a little problem: The blurred part contains my atmospheric exploration aircraft, I just don't want to spoil the design already As you can see, the remaining space in the cargo bay is pretty small to fit in a surface outpost but I have some space left below the aircraft....so am I allowed to split the outpost in multiple modules, assemble them in low laythe orbit and put the whole outpost back into the cargo bay to land it on laythe? Obviously, I need to get rid of the aircraft before I can do this but that's fine with the rules so far Expand You can probably make a tiny outpost by putting the ISRU vertically on a corner of what's left in the bay, and attach a few habitats around ? Link to comment Share on other sites More sharing options...
4x4cheesecake Posted November 2, 2018 Share Posted November 2, 2018 On 11/2/2018 at 5:05 PM, Kerbolitto said: You can probably make a tiny outpost by putting the ISRU vertically on a corner of what's left in the bay, and attach a few habitats around ? Expand Hm...maybe multiple small habitats will actually help a bit. So far, I'm using just the hitchhiker: I'll try some mk1 lander cans or crew cabins instead, I'm curious how this will look and fit, just in case I'm not allowed to split the outpost in multiple modules PS: That's actually my 1000. post Link to comment Share on other sites More sharing options...
Kerbolitto Posted November 2, 2018 Share Posted November 2, 2018 On 11/2/2018 at 5:38 PM, 4x4cheesecake said: Hm...maybe multiple small habitats will actually help a bit. So far, I'm using just the hitchhiker: I'll try some mk1 lander cans or crew cabins instead, I'm curious how this will look and fit, just in case I'm not allowed to split the outpost in multiple modules PS: That's actually my 1000. post Expand Put everything vertically, there's more space in Y axis . Get rid of the big RCS wheel & put 2/3 battery packs on both sides of the bay instead of using a node Link to comment Share on other sites More sharing options...
4x4cheesecake Posted November 2, 2018 Share Posted November 2, 2018 On 11/2/2018 at 5:50 PM, Kerbolitto said: Put everything vertically, there's more space in Y axis . Get rid of the big RCS wheel & put 2/3 battery packs on both sides of the bay instead of using a node Expand Oh, I see! Yeah I'll try that Never thought about building along the Y-Axis and put the stuff next to each other or at least not for the orignial design... the 'split' version actually requires exactly this type of design, I have no clue why I haven't thought about it earlier xD Well, sometimes you lose the forest for the trees^^ (and finding a translation for an idiom is quiet an adventure ) Link to comment Share on other sites More sharing options...
michal.don Posted November 3, 2018 Author Share Posted November 3, 2018 On 11/2/2018 at 4:28 PM, 4x4cheesecake said: As you can see, the remaining space in the cargo bay is pretty small to fit in a surface outpost but I have some space left below the aircraft....so am I allowed to split the outpost in multiple modules, assemble them in low laythe orbit and put the whole outpost back into the cargo bay to land it on laythe? Expand If you don't decide for a redesign, orbital assembly of the outpost is completely fine, too. I'm getting curious, this should be a good one Link to comment Share on other sites More sharing options...
4x4cheesecake Posted November 3, 2018 Share Posted November 3, 2018 On 11/3/2018 at 10:01 AM, michal.don said: If you don't decide for a redesign, orbital assembly of the outpost is completely fine, too. I'm getting curious, this should be a good one Expand Perfect I'll test a few designs and see how it works. Having the option for an orbital assembly increases the possibilities. I'm already excited about my aircraft design, this will be a such a great mission Link to comment Share on other sites More sharing options...
mythic_fci Posted November 3, 2018 Share Posted November 3, 2018 Absolutely incredible to see this challenge still in action! Just wanted to pop in and say well done, guys - it's been awesome scrolling through the 47 pages and seeing everything everyone's done (and those nice fancy badges in everyone's signatures)... Maybe I should make something and get back in the game? Link to comment Share on other sites More sharing options...
4x4cheesecake Posted November 3, 2018 Share Posted November 3, 2018 On 11/3/2018 at 10:27 AM, FCISuperGuy said: Maybe I should make something and get back in the game? Expand Do it! Link to comment Share on other sites More sharing options...
Chel Posted November 3, 2018 Share Posted November 3, 2018 On 11/3/2018 at 11:25 AM, 4x4cheesecake said: Do it! Expand Link to comment Share on other sites More sharing options...
Barzon Posted November 3, 2018 Share Posted November 3, 2018 Can I use this mod for a space shuttle? https://forum.kerbalspaceprogram.com/index.php?/topic/161096-12-13-14-15-release-mk25-spaceplane-parts-rebuilt-expanded/ Link to comment Share on other sites More sharing options...
Recommended Posts