Jump to content

Kerturn - HBI Edition


Ph34rb0t

Recommended Posts

Hot Beverage Inc - Parts as hot as our beverages!

-> General Product Complaint Thread Here! <-

DOWNLOAD

http://kerbalspaceprogram.com/not-a-saturn-v/

th_Sat1b.jpg

K-B3 and K-A are done as meshes, but still untextured.

All parts are kerbal-scaled versions of their human-made counterparts. Dito for the performance.

Still considering doing the launch escape tower and a new command pod more in line with the human-made original.

The Munar module and Kerblab will be done at a later stage.

Within KSP:

The launch weight of the Kerturn I is 200 tons, about one third of the real one. Since it gets massively top-heavy and tends to make the gravity turn difficult, using MechJeb with a suitable flight profile is highly recommended.

th_screenshot8.png

th_screenshot9.png

Staging. So far, I've done only LKO operations. TMI is still untested.

th_screenshot1-1.png

The fairings separate nicely.

th_screenshot3.png

Space flowers!

th_screenshot5.png

The command module with comm antennae deployed.

th_screenshot6-1.png

Edited by Ph34rb0t
Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...

It took me a bit of effort to get this thing into space without damaging its payload. I started calling the upper stage fairings "death flowers" since they kept tearing solar panels and antennae off of my service module (my own build, not the included module). I had to use PDCWolf Perfectrons to kick those fairings clear of the cargo. I upped the first stage thrust 20% and the upper stage thrust 25% (no changes to Isp), and I can easily get an Apollo-like mission (service module and lander) to the Mun without using any of their fuel until I fine-tune my approach. I also used MechJeb to limit acceleration to 25 m/s^2, which helped a lot with the bucking and twisting because of the CoM / CoT distance before the first stage separation.

Link to comment
Share on other sites

The excessive thrust and fuel is to "KSP part" scale with the real thing. If someone wants to rebalance it, go right ahead.

Also, if you think this one is too "kerbalized", check out this more realistic rendition of the Project Apollo stuff:

http://forum.kerbalspaceprogram.com/showthread.php/29411-Apollo-Mission-Pack-Development-%28Beta-version-released!%29

http://kerbalspaceprogram.com/apollo-lmcsm-replica/

I started calling the upper stage fairings "death flowers" since they kept tearing solar panels and antennae off of my service module (my own build, not the included module).

Heh. Well, I *did* write that the petals execute a meticuously planned maeuver with very little room to spare when separating. :D

I also used MechJeb to limit acceleration to 25 m/s^2, which helped a lot with the bucking and twisting because of the CoM / CoT distance before the first stage separation.

I think with the strut in place, I didn't need to limit MJ's thrust.

Gonna test this out right quick! Just a quick note - since this isn't a plugin, you're not obligated to package the source files with it, still nice though!

I know, but I do it by principle. Keepsd people from complaining.

Besides, if anyone wants to finish a kerbalized S-I and S-IIC, there are some basic models included as well.

I assembled the Saturn IB. It is really good and even the look of it is very nice but I think it has too much delta v. The 2nd stage tank had half of it's fuel after finalizing the orbit.

See above. Everything is to "KSP part"-scale of the real thing.

Link to comment
Share on other sites

Heh. Well, I *did* write that the petals execute a meticuously planned maeuver with very little room to spare when separating. :D

I think with the strut in place, I didn't need to limit MJ's thrust.

I must have interpreted "meticulous" as "apply full throttle and see what happens".

I went back and strutted the upper parts better once I realized that the service module was wobbling badly on top of the lander, but I haven't had a chance to launch it yet. That might help with the meticulous separation maneuver, too. :D

Link to comment
Share on other sites

I went back and strutted the upper parts better once I realized that the service module was wobbling badly on top of the lander, but I haven't had a chance to launch it yet. That might help with the meticulous separation maneuver, too. :D

Had I contiunued this project all the way to a LM, it would have come with SUPERSTRONG decouplers (just like the rest of the rocket). You might want to need to mod some to alleviate excessive wobbling.

By the way: 0 Download, 3 Comments. LoL.

Link to comment
Share on other sites

The excessive thrust and fuel is to "KSP part" scale with the real thing. If someone wants to rebalance it, go right ahead.

Also, if you think this one is too "kerbalized", check out this more realistic rendition of the Project Apollo stuff:

http://forum.kerbalspaceprogram.com/showthread.php/29411-Apollo-Mission-Pack-Development-%28Beta-version-released!%29

http://kerbalspaceprogram.com/apollo-lmcsm-replica/

Heh. Well, I *did* write that the petals execute a meticuously planned maeuver with very little room to spare when separating. :D

I think with the strut in place, I didn't need to limit MJ's thrust.

I know, but I do it by principle. Keepsd people from complaining.

Besides, if anyone wants to finish a kerbalized S-I and S-IIC, there are some basic models included as well.

See above. Everything is to "KSP part"-scale of the real thing.

Look at the wiki article of the SIVB stage on the Saturn IB :https://en.wikipedia.org/wiki/Saturn_IB

It state that it used the 200 variant of the SIVB wich means it had enough Delta-V to get a CSM in LEO, the 500 version was only used on the Saturn V.

More info here:https://en.wikipedia.org/wiki/S-IVB_(rocket_stage)

Link to comment
Share on other sites

By the way: 0 Download, 3 Comments. LoL.

The download counter is ... shall I say, inaccurate?

As for comments, I'd love to comment on it, but I can't get an account that works on Spaceport. I had to PM a Mod for help to get this account working here. For some reason Squad's websites and my email server don't play well together.

Link to comment
Share on other sites

very very nice.. was hoping someone would make a IB.. The differing fuel types don't play nice with Mechjeb though. You have to re engage the autopilot on ascent after staging.

Also, you might consider making the fins separate parts. I had to add 8 standard canards in between the decorative fins to keep the thing stable during gravity turn (this is using FAR)

Edited by Bloodbunny
Link to comment
Share on other sites

It state that it used the 200 variant of the SIVB wich means it had enough Delta-V to get a CSM in LEO, the 500 version was only used on the Saturn V.

The only major difference, next to the interstage, between the -200 and -500 was the lack of restart capability of the former, so I doubt that it would have been suitable for a journey to the moon. Unless, of course, you're doing away with the earth parking orbit and shoot for a direct ascent.

By the way, the excessive dV is due to the weird scaling used in KSP. Rockets are 33% of their real size while everything else is only 10% of its real size. So you can either scale performance for rockets or for Kerbin.

The download counter is ... shall I say, inaccurate?

I hope! :D

very very nice.. was hoping someone would make a IB.. The differing fuel types don't play nice with Mechjeb though. You have to re engage the autopilot on ascent after staging.

Funny, it worked for me during testing. Then again, it was in 0.20 with 1.x.x versions of MJ.

Also, you might consider making the fins separate parts. I had to add 8 standard canards in between the decorative fins to keep the thing stable during gravity turn (this is using FAR)

Again, not many problems during testing in 0.20 for me. Could be that the MJ or SAS changes are not playing along nicely with the IB.

Also, how would I make sure that the fins get slapped on the right positions Fixed attachpoints?

Link to comment
Share on other sites

Alrighty, I've scaled the S-IB for 10% performance (akin to Kerbin's scale vs Earth) and I got an impressively tall, free-standing monument out of it. Wat do

- Edit:

Okay, even 20% and 25% doesn't cut it. It's either 33% or bust.

- Edit²:

I've spent at least five hours devising a workable ascent profile (sucks to have lost the old data).

As the S-IVB lacks a fair bit of punch, you will need some time to get your speed up. Hence anything around 100 km usually ends in embarassing suborbital trajectories due to mere lack of time.

My last initial orbit was 150 Km with the following Mechjeb settings:

Turn start: 2 Km

Turn end: 100 Km

Final flight path angle: 10°

Profile: 60%

Nothing broke apart during ascent and the panels separated without touching anything. Also, despite some slight wobbling, there was no need for extra control surfaces*.

Other profiles are welcome though.

Hint:

Get the ullage rockets from NovaPunch and attach them to the S-IVB. Then put a camera next to the engine and watch the staging. :)

(Something akin to this: http://i1188.photobucket.com/albums/z416/DArkB0mb3rz22/apollo-4-staging.gif)

Also, NP provides a LES and a stackable parachute. Put a docking port between the parachute and the LES, make sure to assign LES functions correctly et voilà, Kerpollo 7. Don't forget to take aspirine and handkerchiefs with you though.

*I might just turn the winglets on the S-IB into rigid extra winglets regardless.

- Edit³:

PICS

Ub1ljBI.jpg

m2TLnKc.png

GSmXCJt.png

FcLVU5c.png

eY86joQ.png

Edited by Ph34rb0t
Link to comment
Share on other sites

Here's the .craft file for a complete S-IB.

Requires NovaPunch and DeadlyReentry!

ship = Kerturn IB
version = 0.21.1
description =
type = VAB
PART
{
part = Mark1-2Pod_4292178398
partName = Part
pos = -0.09133057,42.45066,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 0
dstg = 0
sidx = -1
sqor = -1
attm = 0
link = 2.5.Heatshield_4292178304
link = NP.chute.2.5m.stackparachute_4292178274
attN = bottom,2.5.Heatshield_4292178304
attN = top,NP.chute.2.5m.stackparachute_4292178274
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleCommand
isEnabled = True
controlSrcStatusText =
EVENTS
{
MakeReference
{
active = True
guiActive = True
guiIcon = Control From Here
guiName = Control From Here
category = Control From Here
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
RenameVessel
{
active = True
guiActive = True
guiIcon = Rename Vessel
guiName = Rename Vessel
category = Rename Vessel
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
}
}
MODULE
{
name = ModuleSAS
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
MODULE
{
name = ModuleReactionWheel
isEnabled = True
stateString = Active
WheelState = Active
EVENTS
{
OnToggle
{
active = True
guiActive = True
guiIcon = Toggle Torque
guiName = Toggle Torque
category = Toggle Torque
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
Activate
{
actionGroup = None
}
Deactivate
{
actionGroup = None
}
Toggle
{
actionGroup = None
}
}
}
MODULE
{
name = MechJebCore
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
MechJebLocalSettings
{
MechJebModuleJoke
{
}
MechJebModuleMenu
{
}
MechJebModuleRendezvousAutopilotWindow
{
}
MechJebModuleRendezvousGuidance
{
}
MechJebModuleRoverController
{
heading
{
val = 0
_text = 0
}
speed
{
val = 10
_text = 10
}
}
MechJebModuleRCSBalancerWindow
{
}
MechJebModuleCustomInfoWindow
{
}
MechJebModuleRendezvousAutopilot
{
}
MechJebModuleCustomInfoWindow
{
}
MechJebModuleRoverWindow
{
}
MechJebModuleTargetController
{
}
MechJebModuleWarpHelper
{
}
MechJebModuleTranslatron
{
trans_spd = 0
}
MechJebModuleThrustWindow
{
}
MechJebModuleStageStats
{
}
MechJebModuleSmartASS
{
mode = ORBITAL
target = OFF
advReference = INERTIAL
advDirection = FORWARD
srfHdg
{
val = 90
_text = 90
}
srfPit
{
val = 90
_text = 90
}
srfRol
{
val = 0
_text = 0
}
}
MechJebModuleSettings
{
}
MechJebModuleSpaceplaneGuidance
{
}
MechJebModuleSpaceplaneAutopilot
{
}
MechJebModuleCustomWindowEditor
{
}
MechJebModuleCustomInfoWindow
{
}
MechJebModuleDockingGuidance
{
}
MechJebModuleDockingAutopilot
{
}
MechJebModuleAscentGuidance
{
}
MechJebModuleAscentAutopilot
{
}
MechJebModuleAttitudeAdjustment
{
}
MechJebModuleAscentPathEditor
{
}
MechJebModuleCustomInfoWindow
{
}
MechJebModuleManeuverPlanner
{
}
MechJebModuleLandingPredictions
{
}
MechJebModuleNodeExecutor
{
}
MechJebModuleNodeEditor
{
}
MechJebModuleInfoItems
{
}
MechJebModuleJokeObscurePanel
{
}
MechJebModuleLandingGuidance
{
}
MechJebModuleLandingAutopilot
{
touchdownSpeed
{
val = 0.5
_text = 0.5
}
}
MechJebModuleWarpController
{
}
MechJebModuleThrustController
{
limitThrottle = False
maxThrottle
{
val = 1
_text = 100
}
}
MechJebModuleRCSController
{
}
MechJebModuleRCSBalancer
{
}
MechJebModuleAttitudeController
{
}
MechJebModuleStagingController
{
}
MechJebModuleFlightRecorder
{
markUT = 0
deltaVExpended = 0
dragLosses = 0
gravityLosses = 0
steeringLosses = 0
markLatitude = 0
markLongitude = 0
markAltitude = 0
markBodyIndex = 1
maxDragGees = 0
}
}
}
MODULE
{
name = ModuleTripLogger
isEnabled = False
EVENTS
{
}
ACTIONS
{
}
Surfaced
{
}
Flew
{
}
FlewBy
{
}
Orbited
{
}
SubOrbited
{
}
}
}
PART
{
part = 2.5.Heatshield_4292178304
partName = Part
pos = -0.09133057,41.78292,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 0
dstg = 0
sidx = -1
sqor = -1
attm = 0
link = HB.ServiceModule.25_4292178086
attN = bottom,HB.ServiceModule.25_4292178086
attN = top,Mark1-2Pod_4292178398
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleHeatShield
isEnabled = True
deployAnimationController = 0
direction = (0, -1, 0)
reflective = 0.05
ablative = AblativeShielding
area = 0
thickness = 0
adjustCollider = 0
crashTolerance = 8
damage = 0
dead = False
loss
{
key = 650 0 0.9142857 0.9142857
key = 1000 320 0.4771429 0.4771429
key = 3000 400 0.04 0.04
}
dissipation
{
key = 300 0 0.45 0.45
key = 500 90 0.45 0.45
}
EVENTS
{
RepairDamage
{
active = True
guiActive = False
guiIcon = No Damage
guiName = No Damage
category = No Damage
guiActiveUnfocused = True
unfocusedRange = 4
externalToEVAOnly = True
}
}
ACTIONS
{
}
}
}
PART
{
part = NP.chute.2.5m.stackparachute_4292178274
partName = Part
pos = -0.09133057,43.82385,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 0
dstg = 0
sidx = 0
sqor = 0
attm = 0
link = dockingPort3_4292178224
attN = bottom,Mark1-2Pod_4292178398
attN = top,dockingPort3_4292178224
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleParachute
isEnabled = True
persistentState = STOWED
staged = False
EVENTS
{
Deploy
{
active = True
guiActive = True
guiIcon = Deploy Chute
guiName = Deploy Chute
category = Deploy Chute
guiActiveUnfocused = True
unfocusedRange = 4
externalToEVAOnly = True
}
CutParachute
{
active = False
guiActive = True
guiIcon = Cut Parachute
guiName = Cut Parachute
category = Cut Parachute
guiActiveUnfocused = True
unfocusedRange = 4
externalToEVAOnly = True
}
Repack
{
active = False
guiActive = False
guiIcon = Repack Chute
guiName = Repack Chute
category = Repack Chute
guiActiveUnfocused = True
unfocusedRange = 4
externalToEVAOnly = True
}
}
ACTIONS
{
DeployAction
{
actionGroup = None
}
CutAction
{
actionGroup = None
}
}
}
}
PART
{
part = dockingPort3_4292178224
partName = Part
pos = -0.09133057,44.00385,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 0
dstg = 0
sidx = -1
sqor = -1
attm = 0
link = NP.LES.EscapeTower.Large_4292178186
attN = top,NP.LES.EscapeTower.Large_4292178186
attN = bottom,NP.chute.2.5m.stackparachute_4292178274
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDockingNode
isEnabled = True
state = Ready
dockUId = 0
dockNodeIdx = 0
EVENTS
{
Undock
{
active = False
guiActive = True
guiIcon = Undock
guiName = Undock
category = Undock
guiActiveUnfocused = True
unfocusedRange = 2
externalToEVAOnly = True
}
UndockSameVessel
{
active = False
guiActive = True
guiIcon = Undock
guiName = Undock
category = Undock
guiActiveUnfocused = True
unfocusedRange = 2
externalToEVAOnly = True
}
Decouple
{
active = False
guiActive = True
guiIcon = Decouple Node
guiName = Decouple Node
category = Decouple Node
guiActiveUnfocused = True
unfocusedRange = 2
externalToEVAOnly = True
}
SetAsTarget
{
active = True
guiActive = False
guiIcon = Set as Target
guiName = Set as Target
category = Set as Target
guiActiveUnfocused = True
unfocusedRange = 200
externalToEVAOnly = False
}
UnsetTarget
{
active = True
guiActive = False
guiIcon = Unset Target
guiName = Unset Target
category = Unset Target
guiActiveUnfocused = True
unfocusedRange = 200
externalToEVAOnly = False
}
EnableXFeed
{
active = False
guiActive = True
guiIcon = Enable Crossfeed
guiName = Enable Crossfeed
category = Enable Crossfeed
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
DisableXFeed
{
active = False
guiActive = True
guiIcon = Disable Crossfeed
guiName = Disable Crossfeed
category = Disable Crossfeed
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
MakeReferenceTransform
{
active = True
guiActive = True
guiIcon = Control from Here
guiName = Control from Here
category = Control from Here
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
UndockAction
{
actionGroup = None
}
DecoupleAction
{
actionGroup = None
}
}
}
}
PART
{
part = NP.LES.EscapeTower.Large_4292178186
partName = Part
pos = -0.09133057,45.34726,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 2
dstg = 1
sidx = 0
sqor = 2
attm = 0
attN = bottom,dockingPort3_4292178224
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0.9
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = Abort, Custom01
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAnimateHeat
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = Custom01
}
}
}
}
PART
{
part = HB.ServiceModule.25_4292178086
partName = Part
pos = -0.09133057,39.39792,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 1
dstg = 1
sidx = 0
sqor = 1
attm = 0
link = KerpolloPropulsionSystem_4292178018
link = RCSBlock_4292176908
link = RCSBlock_4292176870
link = RCSBlock_4292176832
link = RCSBlock_4292176794
attN = top,2.5.Heatshield_4292178304
attN = bottom,KerpolloPropulsionSystem_4292178018
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = Abort
}
}
}
MODULE
{
name = ModuleGenerator
isEnabled = True
generatorIsActive = False
throttle = 0
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Generator
guiName = Fuel Cell On
category = Activate Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = True
guiActive = True
guiIcon = Shutdown Generator
guiName = Fuel Cell Off
category = Shutdown Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = Custom04
}
ActivateAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAnimateGeneric
isEnabled = True
animSwitch = True
animTime = 0
animSpeed = 1
EVENTS
{
Toggle
{
active = True
guiActive = True
guiIcon = Toggle
guiName = Deploy Antennas
category = Toggle
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = Custom03
}
}
}
}
PART
{
part = KerpolloPropulsionSystem_4292178018
partName = Part
pos = -0.09133057,36.89792,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 2
dstg = 2
sidx = 1
sqor = 2
attm = 0
link = HB.Truss_4292177946
attN = top,HB.ServiceModule.25_4292178086
attN = bottom,HB.Truss_4292177946
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAlternator
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
}
PART
{
part = HB.Truss_4292177946
partName = Part
pos = -0.09133057,32.39792,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 3
dstg = 2
sidx = 0
sqor = 3
attm = 0
link = HB.Split.Fairing.Base.3_4292177924
attN = top,KerpolloPropulsionSystem_4292178018
attN = bottom,HB.Split.Fairing.Base.3_4292177924
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
}
PART
{
part = HB.Split.Fairing.Base.3_4292177924
partName = Part
pos = -0.09133057,32.32292,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 2
dstg = 3
sidx = 2
sqor = 2
attm = 0
link = HB.Split.Fairing.Large.3_4292177880
link = HB.Split.Fairing.Large.3_4292177858
link = HB.Split.Fairing.Large.3_4292177836
link = KerturnD2Tank_4292177814
link = HB.Split.Fairing.Large.3_4292177902
attN = top,HB.Truss_4292177946
attN = bottom,KerturnD2Tank_4292177814
attN = connect1,HB.Split.Fairing.Large.3_4292177880
attN = connect2,HB.Split.Fairing.Large.3_4292177858
attN = connect3,HB.Split.Fairing.Large.3_4292177836
attN = connect4,HB.Split.Fairing.Large.3_4292177902
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
}
PART
{
part = HB.Split.Fairing.Large.3_4292177880
partName = Part
pos = -0.09133016,32.39792,0.02306142
rot = 0,1,0,0
attRot = 0,0.9999999,0,0
mir = 1,1,1
istg = 4
dstg = 4
sidx = 1
sqor = 4
attm = 0
attN = bottom,HB.Split.Fairing.Base.3_4292177924
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
}
PART
{
part = HB.Split.Fairing.Large.3_4292177858
partName = Part
pos = -0.09133057,32.39792,0.02306118
rot = 0,0.7071068,0,0.7071068
attRot = 0,0.7071068,0,0.7071068
mir = 1,1,1
istg = 4
dstg = 4
sidx = 2
sqor = 4
attm = 0
attN = bottom,HB.Split.Fairing.Base.3_4292177924
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
}
PART
{
part = HB.Split.Fairing.Large.3_4292177836
partName = Part
pos = -0.09133007,32.39792,0.02306106
rot = 0,0.7071068,0,-0.7071068
attRot = 0,0.7071067,0,-0.7071067
mir = 1,1,1
istg = 4
dstg = 4
sidx = 3
sqor = 4
attm = 0
attN = bottom,HB.Split.Fairing.Base.3_4292177924
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
}
PART
{
part = KerturnD2Tank_4292177814
partName = Part
pos = -0.09133057,25.24792,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 4
dstg = 4
sidx = -1
sqor = -1
attm = 0
link = KerturnD2Engines_4292177790
link = NP.aux.radialullagebooster_4292176756
link = NP.aux.radialullagebooster_4292176694
link = NP.aux.radialullagebooster_4292176632
link = NP.aux.radialullagebooster_4292176570
attN = top,HB.Split.Fairing.Base.3_4292177924
attN = bottom,KerturnD2Engines_4292177790
EVENTS
{
}
ACTIONS
{
}
}
PART
{
part = KerturnD2Engines_4292177790
partName = Part
pos = -0.09133057,22.24792,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 5
dstg = 4
sidx = 0
sqor = 5
attm = 0
link = HB.K-D2.Interstage.375_4292177718
attN = top,KerturnD2Tank_4292177814
attN = bottom,HB.K-D2.Interstage.375_4292177718
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAlternator
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
}
PART
{
part = HB.K-D2.Interstage.375_4292177718
partName = Part
pos = -0.09133057,22.14792,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 6
dstg = 5
sidx = 0
sqor = 6
attm = 0
link = KerturnA2Tank_4292177694
attN = top,KerturnD2Engines_4292177790
attN = bottom,KerturnA2Tank_4292177694
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
}
PART
{
part = KerturnA2Tank_4292177694
partName = Part
pos = -0.09133057,8.647919,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 6
dstg = 6
sidx = -1
sqor = -1
attm = 0
link = KerturnA2Engines_4292177670
link = launchClamp1_4292177332
link = launchClamp1_4292177226
link = launchClamp1_4292177120
link = launchClamp1_4292177014
attN = top,HB.K-D2.Interstage.375_4292177718
attN = bottom,KerturnA2Engines_4292177670
EVENTS
{
}
ACTIONS
{
}
}
PART
{
part = KerturnA2Engines_4292177670
partName = Part
pos = -0.09133057,7.147919,0.02306111
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 7
dstg = 6
sidx = 0
sqor = 7
attm = 0
attN = top,KerturnA2Tank_4292177694
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAlternator
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
}
PART
{
part = launchClamp1_4292177332
partName = Strut
pos = 1.745154,13.51425,-1.813423
rot = 7.792897E-08,0.3826835,2.245095E-08,-0.9238796
attRot = 0,0,0,1
mir = 1,1,1
istg = 7
dstg = 6
sidx = 1
sqor = 7
attm = 1
sym = launchClamp1_4292177226
sym = launchClamp1_4292177120
sym = launchClamp1_4292177014
srfN = srfAttach,KerturnA2Tank_4292177694
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = LaunchClamp
isEnabled = True
scaleFactor = 5.617634
height = 14.1744
towerRot = -7.792897E-08,-0.3826835,-2.245095E-08,-0.9238796
EVENTS
{
Release
{
active = False
guiActive = True
guiIcon = Release Clamp
guiName = Release Clamp
category = Release Clamp
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ReleaseClamp
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGenerator
isEnabled = True
generatorIsActive = False
throttle = 0
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Generator
guiName = Activate Generator
category = Activate Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = True
guiActive = True
guiIcon = Shutdown Generator
guiName = Shutdown Generator
category = Shutdown Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
}
}
}
PART
{
part = launchClamp1_4292177226
partName = Strut
pos = -1.927814,13.51425,-1.813423
rot = 7.097932E-08,-0.3826834,-3.922888E-08,-0.9238796
attRot = 0,0,0,1
mir = 1,1,1
istg = 7
dstg = 6
sidx = 2
sqor = 7
attm = 1
sym = launchClamp1_4292177332
sym = launchClamp1_4292177120
sym = launchClamp1_4292177014
srfN = srfAttach,KerturnA2Tank_4292177694
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = LaunchClamp
isEnabled = True
scaleFactor = 5.617634
height = 14.1744
towerRot = -7.097932E-08,0.3826834,3.922888E-08,-0.9238796
EVENTS
{
Release
{
active = False
guiActive = True
guiIcon = Release Clamp
guiName = Release Clamp
category = Release Clamp
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ReleaseClamp
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGenerator
isEnabled = True
generatorIsActive = False
throttle = 0
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Generator
guiName = Activate Generator
category = Activate Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = True
guiActive = True
guiIcon = Shutdown Generator
guiName = Shutdown Generator
category = Shutdown Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
}
}
}
PART
{
part = launchClamp1_4292177120
partName = Strut
pos = -1.927814,13.51425,1.859545
rot = 2.245095E-08,-0.9238796,-7.792897E-08,-0.3826834
attRot = 0,0,0,1
mir = 1,1,1
istg = 7
dstg = 6
sidx = 3
sqor = 7
attm = 1
sym = launchClamp1_4292177332
sym = launchClamp1_4292177226
sym = launchClamp1_4292177014
srfN = srfAttach,KerturnA2Tank_4292177694
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = LaunchClamp
isEnabled = True
scaleFactor = 5.617634
height = 14.1744
towerRot = -2.245095E-08,0.9238796,7.792897E-08,-0.3826834
EVENTS
{
Release
{
active = False
guiActive = True
guiIcon = Release Clamp
guiName = Release Clamp
category = Release Clamp
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ReleaseClamp
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGenerator
isEnabled = True
generatorIsActive = False
throttle = 0
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Generator
guiName = Activate Generator
category = Activate Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = True
guiActive = True
guiIcon = Shutdown Generator
guiName = Shutdown Generator
category = Shutdown Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
}
}
}
PART
{
part = launchClamp1_4292177014
partName = Strut
pos = 1.745154,13.51425,1.859545
rot = -3.922888E-08,-0.9238796,-7.097932E-08,0.3826834
attRot = 0,0,0,1
mir = 1,1,1
istg = 7
dstg = 6
sidx = 4
sqor = 7
attm = 1
sym = launchClamp1_4292177332
sym = launchClamp1_4292177226
sym = launchClamp1_4292177120
srfN = srfAttach,KerturnA2Tank_4292177694
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = LaunchClamp
isEnabled = True
scaleFactor = 5.617634
height = 14.1744
towerRot = 3.922888E-08,0.9238796,7.097932E-08,0.3826834
EVENTS
{
Release
{
active = False
guiActive = True
guiIcon = Release Clamp
guiName = Release Clamp
category = Release Clamp
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ReleaseClamp
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGenerator
isEnabled = True
generatorIsActive = False
throttle = 0
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Generator
guiName = Activate Generator
category = Activate Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = True
guiActive = True
guiIcon = Shutdown Generator
guiName = Shutdown Generator
category = Shutdown Generator
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
}
}
}
PART
{
part = RCSBlock_4292176908
partName = Part
pos = 0.8280315,40.41117,-0.8973506
rot = 1.698817E-07,0.9238796,-6.183188E-08,-0.3826835
attRot = 0,0,0,1
mir = 1,1,1
istg = 2
dstg = 2
sidx = -1
sqor = -1
attm = 1
sym = RCSBlock_4292176870
sym = RCSBlock_4292176832
sym = RCSBlock_4292176794
srfN = srfAttach,HB.ServiceModule.25_4292178086
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleRCS
isEnabled = True
isEnabled = True
EVENTS
{
Disable
{
active = True
guiActive = True
guiIcon = Disable RCS Port
guiName = Disable RCS Port
category = Disable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Enable
{
active = False
guiActive = True
guiIcon = Enable RCS Port
guiName = Enable RCS Port
category = Enable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
}
PART
{
part = RCSBlock_4292176870
partName = Part
pos = -1.011742,40.41117,-0.896301
rot = 7.640278E-08,0.3826834,-1.638463E-07,-0.9238796
attRot = 0,0,0,1
mir = 1,1,1
istg = 2
dstg = 2
sidx = -1
sqor = -1
attm = 1
sym = RCSBlock_4292176908
sym = RCSBlock_4292176832
sym = RCSBlock_4292176794
srfN = srfAttach,HB.ServiceModule.25_4292178086
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleRCS
isEnabled = True
isEnabled = True
EVENTS
{
Disable
{
active = True
guiActive = True
guiIcon = Disable RCS Port
guiName = Disable RCS Port
category = Disable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Enable
{
active = False
guiActive = True
guiIcon = Enable RCS Port
guiName = Enable RCS Port
category = Enable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
}
PART
{
part = RCSBlock_4292176832
partName = Part
pos = -1.010693,40.41117,0.9434729
rot = -6.183189E-08,-0.3826835,-1.698817E-07,-0.9238796
attRot = 0,0,0,1
mir = 1,1,1
istg = 2
dstg = 2
sidx = -1
sqor = -1
attm = 1
sym = RCSBlock_4292176908
sym = RCSBlock_4292176870
sym = RCSBlock_4292176794
srfN = srfAttach,HB.ServiceModule.25_4292178086
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleRCS
isEnabled = True
isEnabled = True
EVENTS
{
Disable
{
active = True
guiActive = True
guiIcon = Disable RCS Port
guiName = Disable RCS Port
category = Disable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Enable
{
active = False
guiActive = True
guiIcon = Enable RCS Port
guiName = Enable RCS Port
category = Enable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
}
PART
{
part = RCSBlock_4292176794
partName = Part
pos = 0.8290811,40.41117,0.9424231
rot = -1.638463E-07,-0.9238796,-7.640278E-08,-0.3826834
attRot = 0,0,0,1
mir = 1,1,1
istg = 2
dstg = 2
sidx = -1
sqor = -1
attm = 1
sym = RCSBlock_4292176908
sym = RCSBlock_4292176870
sym = RCSBlock_4292176832
srfN = srfAttach,HB.ServiceModule.25_4292178086
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleRCS
isEnabled = True
isEnabled = True
EVENTS
{
Disable
{
active = True
guiActive = True
guiIcon = Disable RCS Port
guiName = Disable RCS Port
category = Disable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Enable
{
active = False
guiActive = True
guiIcon = Enable RCS Port
guiName = Enable RCS Port
category = Enable RCS Port
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
}
PART
{
part = NP.aux.radialullagebooster_4292176756
partName = Part
pos = -0.09133074,25.59167,-1.910985
rot = 0,-4.371139E-08,0,-1
attRot = 0,0,0,1
mir = 1,1,1
istg = 6
dstg = 4
sidx = 1
sqor = 6
attm = 1
sym = NP.aux.radialullagebooster_4292176694
sym = NP.aux.radialullagebooster_4292176632
sym = NP.aux.radialullagebooster_4292176570
srfN = srfAttach,KerturnD2Tank_4292177814
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0.9
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAnimateHeat
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
}
PART
{
part = NP.aux.radialullagebooster_4292176694
partName = Part
pos = -2.025377,25.59167,0.02306117
rot = 0,-0.7071068,0,-0.7071068
attRot = 0,0,0,1
mir = 1,1,1
istg = 6
dstg = 4
sidx = 2
sqor = 6
attm = 1
sym = NP.aux.radialullagebooster_4292176756
sym = NP.aux.radialullagebooster_4292176632
sym = NP.aux.radialullagebooster_4292176570
srfN = srfAttach,KerturnD2Tank_4292177814
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0.9
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAnimateHeat
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
}
PART
{
part = NP.aux.radialullagebooster_4292176632
partName = Part
pos = -0.09133023,25.59167,1.957108
rot = 0,-1,0,8.742278E-08
attRot = 0,0,0,1
mir = 1,1,1
istg = 6
dstg = 4
sidx = 3
sqor = 6
attm = 1
sym = NP.aux.radialullagebooster_4292176756
sym = NP.aux.radialullagebooster_4292176694
sym = NP.aux.radialullagebooster_4292176570
srfN = srfAttach,KerturnD2Tank_4292177814
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0.9
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAnimateHeat
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
}
PART
{
part = NP.aux.radialullagebooster_4292176570
partName = Part
pos = 1.842716,25.59167,0.02306082
rot = 0,-0.7071068,0,0.7071068
attRot = 0,0,0,1
mir = 1,1,1
istg = 6
dstg = 4
sidx = 4
sqor = 6
attm = 1
sym = NP.aux.radialullagebooster_4292176756
sym = NP.aux.radialullagebooster_4292176694
sym = NP.aux.radialullagebooster_4292176632
srfN = srfAttach,KerturnD2Tank_4292177814
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleEngines
isEnabled = True
EngineIgnited = False
engineShutdown = False
currentThrottle = 0.9
flameout = False
staged = False
EVENTS
{
Activate
{
active = True
guiActive = True
guiIcon = Activate Engine
guiName = Activate Engine
category = Activate Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
Shutdown
{
active = False
guiActive = True
guiIcon = Shutdown Engine
guiName = Shutdown Engine
category = Shutdown Engine
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
OnAction
{
actionGroup = None
}
ShutdownAction
{
actionGroup = None
}
ActivateAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleGimbal
isEnabled = True
gimbalLock = False
EVENTS
{
LockGimbal
{
active = True
guiActive = True
guiIcon = Lock Gimbal
guiName = Lock Gimbal
category = Lock Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
FreeGimbal
{
active = False
guiActive = True
guiIcon = Free Gimbal
guiName = Free Gimbal
category = Free Gimbal
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
ToggleAction
{
actionGroup = None
}
}
}
MODULE
{
name = ModuleAnimateHeat
isEnabled = True
EVENTS
{
}
ACTIONS
{
}
}
}
PART
{
part = HB.Split.Fairing.Large.3_4292177902
partName = Part
pos = -0.09133053,32.39792,0.02306116
rot = 0,0,0,1
attRot = 0,0,0,1
mir = 1,1,1
istg = 4
dstg = 4
sidx = 0
sqor = 4
attm = 0
attN = bottom,HB.Split.Fairing.Base.3_4292177924
EVENTS
{
}
ACTIONS
{
}
MODULE
{
name = ModuleDecouple
isEnabled = True
isDecoupled = False
EVENTS
{
Decouple
{
active = True
guiActive = True
guiIcon = Decouple
guiName = Decouple
category = Decouple
guiActiveUnfocused = False
unfocusedRange = 2
externalToEVAOnly = True
}
}
ACTIONS
{
DecoupleAction
{
actionGroup = None
}
}
}
}

Paste the code into an empty text file, save the text file as "Kerturn IB.craft" and copy the .craft into your [KSP]\saves\[savename]\Ships\VAB folder.

Before firing up KSP, however, edit GameData\NovaPunch2\Parts\Parachutes\NP_chute_2_5m_stackparachute\part.cfg, changing deploymentSpeed and semiDeploymentSpeed from 2 to 1!

In KSP, provided I haven't missed anything, you will have the IB with the following action groups assigned:

Launch Abort Button: Fire LES, detach CM from SM. Spacebar yourself through the stages and deploy your parachute when falling back. Heat shield might be crushed upon landing.

Action Group 1: Fire and detach LES. Do this after staging.

Action Group 3: Deploy comm antennae.

Action Group 4: Toggle fuel cells.

Link to comment
Share on other sites

Nope, I can't and won't.

- E:

To smooth the bluntness a bit: Just take a Mark 1-2 command pod, put a chute or docking port on top of it and just put the stuff from the pack under it. Done. No rocket science at all.

Edited by Ph34rb0t
Link to comment
Share on other sites

I did finally assemble a lander that will fit in the payload bay without clipping. I don't know if I can make it to the Mun or Minmus with this but I was challenged by the assembly of a lander that would fit.

I did have a question about the fuel cell: It says it requires "Fuel Cell Fuel" but I have no idea what generates that resource.

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...