Jump to content

[0.22] UbioZur Welding Ltd. 2.0 Dev STOPPED

UbioZur

By UbioZur
in KSP1 Mod Releases

 Share

Recommended Posts

Alewx

Alewx

Posted
Posted
Excellent stuff, thank you!

...does it handle loading in the new part after creation, or do we still need to restart the game each time? ^^;

Up to you. You can risk and enable the reload of the gamedatabase in the settings, but there is no guarantee that it will work flawless, especial in case of heavy modded games.

Link to comment
Share on other sites
eddiew

eddiew

Posted
Posted
Up to you. You can risk and enable the reload of the gamedatabase in the settings, but there is no guarantee that it will work flawless, especial in case of heavy modded games.

Ahh, OK, didn't realise it was a risk :) might try it and see how it goes! How bad can it be...

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
Ahh, OK, didn't realise it was a risk :) might try it and see how it goes! How bad can it be...

Worst that can happen is: The database gets not reloaded completly and properly and parts are missing and the game will tell you that some crafts can no longer be maintained. But that is highly depending on the amount of mods and MM patches.

Link to comment
Share on other sites
Badsector

Badsector

Posted
Posted

I have find 2 weldings that give problems

This example lose 1 attach point at Advanced Stabilizer

B1LFCargo.cfg

PART
{
    name = B1LFCargo
    module = Part
    author = UbioZurWeldingLtd
    rescaleFactor = 1
    PhysicsSignificance = -1
    node_stack_bottomrtg3 = 0,-0.76175,-0.25206,0,1,0,0
    node_stack_toprtg3 = 0,-0.10815,-0.25206,0,1,0,0
    node_stack_bottomtrussPiece1x2 = 0,-0.91095,0.07333,0,1,0,1
    node_attach = 0,0,0,0,0,0,0
    CrewCapacity = 0
    TechRequired = advFlightControl
    entryCost = 53600
    cost = 5405
    category = Utility
    subcategory = 0
    title = B1-LF Cargo
    manufacturer = UbioZur Welding Ltd
    description = Warranty void during re-entry.
    attachRules = 1,1,1,1,0,0,0
    mass = 0.355
    dragModelType = default
    maximum_drag = 0.1875
    minimum_drag = 0.1875
    angularDrag = 1.5
    crashTolerance = 33.40845
    breakingForce = 84.67606
    breakingTorque = 84.67606
    maxTemp = 3000
    fuelCrossFeed = True
    MODEL
    {
        model = Squad/Parts/Command/inlineAdvancedStabilizer/model
        position = 0,0.62833,0.07333
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-1kBattery/model
        position = 0,0.31845,0.07333
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Structural/trussGirderL/model
        position = 0,-0.35168,0.07333
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/RTG/model
        position = 0,-0.43495,-0.25206
        scale = 1,1,1
        rotation = 360,180,0
    }
    RESOURCE
    {
        name = ElectricCharge
        amount = 1000
        maxAmount = 1000
    }
    MODULE
    {
        name = ModuleReactionWheel
        PitchTorque = 15
        YawTorque = 15
        RollTorque = 15
        RESOURCE
        {
            name = ElectricCharge
            rate = 0.45
        }
    }
    MODULE
    {
        name = ModuleGenerator
        isAlwaysActive = true
        OUTPUT_RESOURCE
        {
            name = ElectricCharge
            rate = 0.75
        }
    }
}

That one have problems in VAB parts-menu (don't stop to become big), the code in .cfg seems right to me

SProbeBody.cfg

PART
{
    name = SProbeBody
    module = Part
    author = UbioZurWeldingLtd
    rescaleFactor = 1
    PhysicsSignificance = -1
    node_stack_bottomtoroidalFuelTank1 = 0,-0.176,0,0,1,0,1
    node_stack_topbatteryBankMini3 = 0,0.67227,0,0,1,0,0
    node_attach = 0,0,0,0,0,0,0
    CrewCapacity = 0
    TechRequired = precisionEngineering
    entryCost = 15400
    cost = 1260
    category = Structural
    subcategory = 0
    title = S-Probe Body
    manufacturer = UbioZur Welding Ltd
    description = Warranty void during re-entry.
    attachRules = 1,0,1,1,0,0,0
    mass = 0.05999999
    dragModelType = default
    maximum_drag = 0.1875
    minimum_drag = 0.17812
    angularDrag = 1.125
    crashTolerance = 6.66667
    breakingForce = 40.66667
    breakingTorque = 40.66667
    maxTemp = 2900
    fuelCrossFeed = True
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankOscarB/model
        position = 0,0.098,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankToroidal/model
        position = 0,-0.12614,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-200Battery/model
        position = 0,0.37227,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-200Battery/model
        position = 0,0.57227,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    RESOURCE
    {
        name = LiquidFuel
        amount = 15.735
        maxAmount = 15.735
    }
    RESOURCE
    {
        name = Oxidizer
        amount = 19.2
        maxAmount = 19.2
    }
    RESOURCE
    {
        name = ElectricCharge
        amount = 400
        maxAmount = 400
    }
}

Sorry for my bad english

Regards

Luca

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
I have find 2 weldings that give problems

This example lose 1 attach point at Advanced Stabilizer

B1LFCargo.cfg

PART
{
    name = B1LFCargo
    module = Part
    author = UbioZurWeldingLtd
    rescaleFactor = 1
    PhysicsSignificance = -1
    node_stack_bottomrtg3 = 0,-0.76175,-0.25206,0,1,0,0
    node_stack_toprtg3 = 0,-0.10815,-0.25206,0,1,0,0
    node_stack_bottomtrussPiece1x2 = 0,-0.91095,0.07333,0,1,0,1
    node_attach = 0,0,0,0,0,0,0
    CrewCapacity = 0
    TechRequired = advFlightControl
    entryCost = 53600
    cost = 5405
    category = Utility
    subcategory = 0
    title = B1-LF Cargo
    manufacturer = UbioZur Welding Ltd
    description = Warranty void during re-entry.
    attachRules = 1,1,1,1,0,0,0
    mass = 0.355
    dragModelType = default
    maximum_drag = 0.1875
    minimum_drag = 0.1875
    angularDrag = 1.5
    crashTolerance = 33.40845
    breakingForce = 84.67606
    breakingTorque = 84.67606
    maxTemp = 3000
    fuelCrossFeed = True
    MODEL
    {
        model = Squad/Parts/Command/inlineAdvancedStabilizer/model
        position = 0,0.62833,0.07333
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-1kBattery/model
        position = 0,0.31845,0.07333
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Structural/trussGirderL/model
        position = 0,-0.35168,0.07333
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/RTG/model
        position = 0,-0.43495,-0.25206
        scale = 1,1,1
        rotation = 360,180,0
    }
    RESOURCE
    {
        name = ElectricCharge
        amount = 1000
        maxAmount = 1000
    }
    MODULE
    {
        name = ModuleReactionWheel
        PitchTorque = 15
        YawTorque = 15
        RollTorque = 15
        RESOURCE
        {
            name = ElectricCharge
            rate = 0.45
        }
    }
    MODULE
    {
        name = ModuleGenerator
        isAlwaysActive = true
        OUTPUT_RESOURCE
        {
            name = ElectricCharge
            rate = 0.75
        }
    }
}

That one have problems in VAB parts-menu (don't stop to become big), the code in .cfg seems right to me

SProbeBody.cfg

PART
{
    name = SProbeBody
    module = Part
    author = UbioZurWeldingLtd
    rescaleFactor = 1
    PhysicsSignificance = -1
    node_stack_bottomtoroidalFuelTank1 = 0,-0.176,0,0,1,0,1
    node_stack_topbatteryBankMini3 = 0,0.67227,0,0,1,0,0
    node_attach = 0,0,0,0,0,0,0
    CrewCapacity = 0
    TechRequired = precisionEngineering
    entryCost = 15400
    cost = 1260
    category = Structural
    subcategory = 0
    title = S-Probe Body
    manufacturer = UbioZur Welding Ltd
    description = Warranty void during re-entry.
    attachRules = 1,0,1,1,0,0,0
    mass = 0.05999999
    dragModelType = default
    maximum_drag = 0.1875
    minimum_drag = 0.17812
    angularDrag = 1.125
    crashTolerance = 6.66667
    breakingForce = 40.66667
    breakingTorque = 40.66667
    maxTemp = 2900
    fuelCrossFeed = True
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankOscarB/model
        position = 0,0.098,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankToroidal/model
        position = 0,-0.12614,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-200Battery/model
        position = 0,0.37227,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-200Battery/model
        position = 0,0.57227,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    RESOURCE
    {
        name = LiquidFuel
        amount = 15.735
        maxAmount = 15.735
    }
    RESOURCE
    {
        name = Oxidizer
        amount = 19.2
        maxAmount = 19.2
    }
    RESOURCE
    {
        name = ElectricCharge
        amount = 400
        maxAmount = 400
    }
}

Sorry for my bad english

Regards

Luca

Hi, that is not a known and old problem of some partpacks but has nothing to do with welding.

There is a common fix for it.

Link to comment
Share on other sites
kubi

kubi

Posted
Posted

Hi,

Thanks for updating this for 0.90!

This is my first try so I'd appreciate some advise...

I try to build a simple sky crane using only stock parts (not even tweak scale): probe core, reaction wheel, battery, clamp-o-tron, 1+3x tanks, 3x 24-77 engine, 3x 1x6 solar panel and 3x flood light.

All 3x parts are in 120 degree symmetry.

I see some strange effects:

  • 2 of 3 lights are lit and can't be turned off. 1 light, the one in position I've placed them with 3x symmetry in editor, can be turned on/off.
  • 2 of 3 solar panels are fixed and closed. Seem to be really closed.
  • One (again where I've placed in editor) is twisted in a strange way. Seems to be open, charges the battery.
  • Heat production / radiation is messed up somehow. Total heat production of the engines is 3x150, seems to be right. However it overheats and explodes quickly. Of course I can decrease the heat production by hand then it is fine.
  • Fuel consumption is very unbalanced. Liquid fuel is used much more faster than oxidizer, 3.4 / 1.4, original engines have 0.73 / 0.89 so in total it should be approx 2.2 / 2.67. 


PART
{
    name = k1
    module = Part
    author = UbioZurWeldingLtd
    rescaleFactor = 1
    PhysicsSignificance = -1
    node_stack_bottomfuelTankSmallFlat5 = -1.31469,0.03831,0,1,0,0,1
    node_stack_bottomfuelTankSmallFlat8 = 0.65735,0.03831,1.13856,-0.5,0,-0.86603,1
    node_stack_bottomfuelTankSmallFlat11 = 0.65735,0.03831,-1.13856,-0.5,0,0.86603,1
    node_stack_topprobeCoreOcto20 = 0,0.9954,0,0,1,0,0
    node_stack_topdockingPort213 = 0,-0.92405,0,0,-1,0,1
    node_attach = 0,0,0,0,0,0,0
    CrewCapacity = 0
    TechRequired = start
    entryCost = 79600
    cost = 11045
    category = Pods
    subcategory = 0
    title = My welded part
    manufacturer = UbioZur Welding Ltd
    description = Warranty void during re-entry.
    attachRules = 1,1,1,1,0,0,0
    mass = 0.8249999
    dragModelType = default
    maximum_drag = 0.20045
    minimum_drag = 0.20045
    angularDrag = 1.00223
    crashTolerance = 7.62628
    breakingForce = 81.63503
    breakingTorque = 81.63503
    maxTemp = 1200
    fuelCrossFeed = True
    MODEL
    {
        model = Squad/Parts/Command/probeCoreOcto2/model
        position = 0,0.93433,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Command/inlineReactionWheel/model
        position = 0,0.78216,0
        scale = 0.5,0.5,0.5
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-1kBattery/model
        position = 0,0.58019,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT200/model
        position = 0,-0.08591,0
        scale = 1.25,1.25,1.25
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Utility/radialAttachmentPoint/model
        position = -0.64281,0.03831,0
        scale = 1,1,1
        rotation = 90,270,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT100/model
        position = -1.00219,0.03831,0
        scale = 1,1,1
        rotation = 0,0,270
    }
    MODEL
    {
        model = Squad/Parts/Engine/liquidEngine24-77/model
        position = -1.47126,-0.25766,0
        scale = 1,1,1
        rotation = 360,270.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Utility/radialAttachmentPoint/model
        position = 0.3214,0.03831,0.55669
        scale = 1,1,1
        rotation = 90,30,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT100/model
        position = 0.5011,0.03831,0.86792
        scale = 1,1,1
        rotation = 0,120,270
    }
    MODEL
    {
        model = Squad/Parts/Engine/liquidEngine24-77/model
        position = 0.73563,-0.25766,1.27415
        scale = 1,1,1
        rotation = 360,30.00006,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Utility/radialAttachmentPoint/model
        position = 0.3214,0.03831,-0.55669
        scale = 1,1,1
        rotation = 90,150,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT100/model
        position = 0.5011,0.03831,-0.86792
        scale = 1,1,1
        rotation = 0,240,270
    }
    MODEL
    {
        model = Squad/Parts/Engine/liquidEngine24-77/model
        position = 0.73563,-0.25766,-1.27415
        scale = 1,1,1
        rotation = 360,150.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Utility/dockingPort/model
        position = 0,-0.64116,0
        scale = 1,1,1
        rotation = 0,180,180
    }
    MODEL
    {
        model = Squad/Parts/Utility/spotLightMk2/model
        position = -0.41615,-0.39618,-0.7208
        scale = 1,1,1
        rotation = 360,30.00001,0
    }
    MODEL
    {
        model = Squad/Parts/Utility/spotLightMk2/model
        position = -0.41615,-0.39618,0.7208
        scale = 1,1,1
        rotation = 360,150,0
    }
    MODEL
    {
        model = Squad/Parts/Utility/spotLightMk2/model
        position = 0.83231,-0.39618,0
        scale = 1,1,1
        rotation = 360,270,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/1x6SolarPanels/model
        position = -0.30423,0.53597,-0.52695
        scale = 1,1,1
        rotation = 0,300.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Electrical/1x6SolarPanels/model
        position = -0.30423,0.53597,0.52695
        scale = 1,1,1
        rotation = 0,60.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Electrical/1x6SolarPanels/model
        position = 0.60847,0.53597,0
        scale = 1,1,1
        rotation = 0,180.0001,2E-05
    }
    RESOURCE
    {
        name = ElectricCharge
        amount = 1002
        maxAmount = 1002
    }
    RESOURCE
    {
        name = LiquidFuel
        amount = 225
        maxAmount = 225
    }
    RESOURCE
    {
        name = Oxidizer
        amount = 275
        maxAmount = 275
    }
    MODULE
    {
        name = ModuleCommand
        minimumCrew = 0
        RESOURCE
        {
            name = ElectricCharge
            rate = 0.05
        }
    }
    MODULE
    {
        name = ModuleSAS
        SASServiceLevel = 2
    }
    MODULE
    {
        name = ModuleReactionWheel
        PitchTorque = 5
        YawTorque = 5
        RollTorque = 5
        RESOURCE
        {
            name = ElectricCharge
            rate = 0.25
        }
    }
    MODULE
    {
        name = ModuleEnginesFX
        thrustVectorTransformName = thrustTransform
        exhaustDamage = True
        ignitionThreshold = 0.3
        minThrust = 0
        maxThrust = 60
        heatProduction = 450
        fxOffset = 0, 0, 0.01
        PROPELLANT
        {
            name = LiquidFuel
            ratio = 2.7
            DrawGauge = True
        }
        PROPELLANT
        {
            name = Oxidizer
            ratio = 1.1
        }
        atmosphereCurve
        {
            key = 0,300
            key = 1,250
        }
    }
    MODULE
    {
        name = ModuleGimbal
        gimbalTransformName = thrustTransform
        gimbalRange = 3
    }
    MODULE
    {
        name = ModuleTestSubject
        environments = 15
        useStaging = True
        useEvent = True
    }
    MODULE
    {
        name = ModuleDockingNode
        referenceAttachNode = topdockingPort213
        nodeType = size1
    }
    MODULE
    {
        name = ModuleLight
        lightName = spotlight
        useAnimationDim = True
        lightBrightenSpeed = 7.5
        lightDimSpeed = 7.5
        animationName = LightAnimation
        resourceAmount = 0.06
        useResources = True
    }
    MODULE
    {
        name = ModuleDeployableSolarPanel
        animationName = solarpanels4
        resourceName = ElectricCharge
        chargeRate = 6
        powerCurve
        {
            key = 206000000000 0 0 0
            key = 13599840256 1 0 0
            key = 68773560320 0.5 0 0
            key = 0 10 0 0
        }
    }
}

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
Hi,

Thanks for updating this for 0.90!

This is my first try so I'd appreciate some advise...

I try to build a simple sky crane using only stock parts (not even tweak scale): probe core, reaction wheel, battery, clamp-o-tron, 1+3x tanks, 3x 24-77 engine, 3x 1x6 solar panel and 3x flood light.

All 3x parts are in 120 degree symmetry.

I see some strange effects:

  • 2 of 3 lights are lit and can't be turned off. 1 light, the one in position I've placed them with 3x symmetry in editor, can be turned on/off.
  • 2 of 3 solar panels are fixed and closed. Seem to be really closed.
  • One (again where I've placed in editor) is twisted in a strange way. Seems to be open, charges the battery.
  • Heat production / radiation is messed up somehow. Total heat production of the engines is 3x150, seems to be right. However it overheats and explodes quickly. Of course I can decrease the heat production by hand then it is fine.
  • Fuel consumption is very unbalanced. Liquid fuel is used much more faster than oxidizer, 3.4 / 1.4, original engines have 0.73 / 0.89 so in total it should be approx 2.2 / 2.67. 


PART
{
    name = k1
    module = Part
    author = UbioZurWeldingLtd
    rescaleFactor = 1
    PhysicsSignificance = -1
    node_stack_bottomfuelTankSmallFlat5 = -1.31469,0.03831,0,1,0,0,1
    node_stack_bottomfuelTankSmallFlat8 = 0.65735,0.03831,1.13856,-0.5,0,-0.86603,1
    node_stack_bottomfuelTankSmallFlat11 = 0.65735,0.03831,-1.13856,-0.5,0,0.86603,1
    node_stack_topprobeCoreOcto20 = 0,0.9954,0,0,1,0,0
    node_stack_topdockingPort213 = 0,-0.92405,0,0,-1,0,1
    node_attach = 0,0,0,0,0,0,0
    CrewCapacity = 0
    TechRequired = start
    entryCost = 79600
    cost = 11045
    category = Pods
    subcategory = 0
    title = My welded part
    manufacturer = UbioZur Welding Ltd
    description = Warranty void during re-entry.
    attachRules = 1,1,1,1,0,0,0
    mass = 0.8249999
    dragModelType = default
    maximum_drag = 0.20045
    minimum_drag = 0.20045
    angularDrag = 1.00223
    crashTolerance = 7.62628
    breakingForce = 81.63503
    breakingTorque = 81.63503
    maxTemp = 1200
    fuelCrossFeed = True
    MODEL
    {
        model = Squad/Parts/Command/probeCoreOcto2/model
        position = 0,0.93433,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Command/inlineReactionWheel/model
        position = 0,0.78216,0
        scale = 0.5,0.5,0.5
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/z-1kBattery/model
        position = 0,0.58019,0
        scale = 1,1,1
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT200/model
        position = 0,-0.08591,0
        scale = 1.25,1.25,1.25
        rotation = 0,0,0
    }
    MODEL
    {
        model = Squad/Parts/Utility/radialAttachmentPoint/model
        position = -0.64281,0.03831,0
        scale = 1,1,1
        rotation = 90,270,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT100/model
        position = -1.00219,0.03831,0
        scale = 1,1,1
        rotation = 0,0,270
    }
    MODEL
    {
        model = Squad/Parts/Engine/liquidEngine24-77/model
        position = -1.47126,-0.25766,0
        scale = 1,1,1
        rotation = 360,270.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Utility/radialAttachmentPoint/model
        position = 0.3214,0.03831,0.55669
        scale = 1,1,1
        rotation = 90,30,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT100/model
        position = 0.5011,0.03831,0.86792
        scale = 1,1,1
        rotation = 0,120,270
    }
    MODEL
    {
        model = Squad/Parts/Engine/liquidEngine24-77/model
        position = 0.73563,-0.25766,1.27415
        scale = 1,1,1
        rotation = 360,30.00006,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Utility/radialAttachmentPoint/model
        position = 0.3214,0.03831,-0.55669
        scale = 1,1,1
        rotation = 90,150,0
    }
    MODEL
    {
        model = Squad/Parts/FuelTank/fuelTankT100/model
        position = 0.5011,0.03831,-0.86792
        scale = 1,1,1
        rotation = 0,240,270
    }
    MODEL
    {
        model = Squad/Parts/Engine/liquidEngine24-77/model
        position = 0.73563,-0.25766,-1.27415
        scale = 1,1,1
        rotation = 360,150.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Utility/dockingPort/model
        position = 0,-0.64116,0
        scale = 1,1,1
        rotation = 0,180,180
    }
    MODEL
    {
        model = Squad/Parts/Utility/spotLightMk2/model
        position = -0.41615,-0.39618,-0.7208
        scale = 1,1,1
        rotation = 360,30.00001,0
    }
    MODEL
    {
        model = Squad/Parts/Utility/spotLightMk2/model
        position = -0.41615,-0.39618,0.7208
        scale = 1,1,1
        rotation = 360,150,0
    }
    MODEL
    {
        model = Squad/Parts/Utility/spotLightMk2/model
        position = 0.83231,-0.39618,0
        scale = 1,1,1
        rotation = 360,270,0
    }
    MODEL
    {
        model = Squad/Parts/Electrical/1x6SolarPanels/model
        position = -0.30423,0.53597,-0.52695
        scale = 1,1,1
        rotation = 0,300.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Electrical/1x6SolarPanels/model
        position = -0.30423,0.53597,0.52695
        scale = 1,1,1
        rotation = 0,60.0001,2E-05
    }
    MODEL
    {
        model = Squad/Parts/Electrical/1x6SolarPanels/model
        position = 0.60847,0.53597,0
        scale = 1,1,1
        rotation = 0,180.0001,2E-05
    }
    RESOURCE
    {
        name = ElectricCharge
        amount = 1002
        maxAmount = 1002
    }
    RESOURCE
    {
        name = LiquidFuel
        amount = 225
        maxAmount = 225
    }
    RESOURCE
    {
        name = Oxidizer
        amount = 275
        maxAmount = 275
    }
    MODULE
    {
        name = ModuleCommand
        minimumCrew = 0
        RESOURCE
        {
            name = ElectricCharge
            rate = 0.05
        }
    }
    MODULE
    {
        name = ModuleSAS
        SASServiceLevel = 2
    }
    MODULE
    {
        name = ModuleReactionWheel
        PitchTorque = 5
        YawTorque = 5
        RollTorque = 5
        RESOURCE
        {
            name = ElectricCharge
            rate = 0.25
        }
    }
    MODULE
    {
        name = ModuleEnginesFX
        thrustVectorTransformName = thrustTransform
        exhaustDamage = True
        ignitionThreshold = 0.3
        minThrust = 0
        maxThrust = 60
        heatProduction = 450
        fxOffset = 0, 0, 0.01
        PROPELLANT
        {
            name = LiquidFuel
            ratio = 2.7
            DrawGauge = True
        }
        PROPELLANT
        {
            name = Oxidizer
            ratio = 1.1
        }
        atmosphereCurve
        {
            key = 0,300
            key = 1,250
        }
    }
    MODULE
    {
        name = ModuleGimbal
        gimbalTransformName = thrustTransform
        gimbalRange = 3
    }
    MODULE
    {
        name = ModuleTestSubject
        environments = 15
        useStaging = True
        useEvent = True
    }
    MODULE
    {
        name = ModuleDockingNode
        referenceAttachNode = topdockingPort213
        nodeType = size1
    }
    MODULE
    {
        name = ModuleLight
        lightName = spotlight
        useAnimationDim = True
        lightBrightenSpeed = 7.5
        lightDimSpeed = 7.5
        animationName = LightAnimation
        resourceAmount = 0.06
        useResources = True
    }
    MODULE
    {
        name = ModuleDeployableSolarPanel
        animationName = solarpanels4
        resourceName = ElectricCharge
        chargeRate = 6
        powerCurve
        {
            key = 206000000000 0 0 0
            key = 13599840256 1 0 0
            key = 68773560320 0.5 0 0
            key = 0 10 0 0
        }
    }
}

Hi Kubi,

the problems you meantion are some leacy things that we still didn't find a workaround for.

The Basic rules are:

  • If you want to weld animated parts never use more than one.
  • If you want to weld lights never use more than one.
  • If you want to weld engines never use more than one, it still may break the part.

About the max temperature you can find the setting for how it shall be calculated, like the breaking torque/force in the settings option in the main window of the weldingtool.

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
I think you should make a new forum thread, and let this one die :)

Nope :)

The current situation is that we maintain the mod, so it is only fair to Keep it in this thread.

When we rewrite the mod from ground up, then it is time for an own thread.

Link to comment
Share on other sites
mendahu

mendahu

Posted
Posted

Hi guys,

I'm experiencing a problem using the welder tool to build custom frames out of wing surfaces. After designing a structure and welding it, the welder part looks like this:

lCXJBFO.png

It appears as though the orientation settings are not carrying over. The nodes are all in the right places and the parts are rendering right, but the rotation, offset, etc. are gone.

Is there a way to fix this?

Thanks!

-mendahu

www.ksphistory.com

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
Hi guys,

I'm experiencing a problem using the welder tool to build custom frames out of wing surfaces. After designing a structure and welding it, the welder part looks like this:

http://i.imgur.com/lCXJBFO.png

It appears as though the orientation settings are not carrying over. The nodes are all in the right places and the parts are rendering right, but the rotation, offset, etc. are gone.

Is there a way to fix this?

Thanks!

-mendahu

www.ksphistory.com

Did you use the new offset and rotationtools or ust the old pre 0.9 way?

I never welded wings before, I will look into it.

Link to comment
Share on other sites
Goose09

Goose09

Posted
Posted

^This.

I have been trying to use this mod, but I keep getting weirdness. KSP gets hung up on a file when loading, my camera flies up into space at launch, etc. I'm pretty sure I installed it correctly, but this would help.

Link to comment
Share on other sites
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...