Voculus Posted October 10, 2014 Share Posted October 10, 2014 Alright, I guess the order of installation matters. I already had the latest JSI installed, but after reinstalling, the ALCOR monitors are all working again! :cool:However, while they work in Porkjet's old Spaceplane cockpits, they don't work in the Squad's version of the Spaceplane parts for me. Quote Link to comment Share on other sites More sharing options...
SlimIsJim Posted October 13, 2014 Share Posted October 13, 2014 nli2work linked to an update to the new space plane parts here: http://forum.kerbalspaceprogram.com/threads/57603-0-25-RasterPropMonitor-putting-the-A-in-your-IVA-%28v0-18-3%29-8-Oct/page212Whenever I launch with an alcor capsule I get a message that says "RasterPropMonitor: Initialization error, check configuration". RasterProp doesn't work inside the Alcor capsule but does work with any other IVA's that have RasterProp. Does anyone have any ideas? Quote Link to comment Share on other sites More sharing options...
Voculus Posted October 13, 2014 Share Posted October 13, 2014 Slim, I've had that issue a few times, and the only thing that worked was to simply delete the entire ASET and RPM folders, an reinstall. I know, it's not very reassuring, but I've had luck with that. Quote Link to comment Share on other sites More sharing options...
Johnny2000 Posted October 13, 2014 Share Posted October 13, 2014 Whenever I launch with an alcor capsule I get a message that says "RasterPropMonitor: Initialization error, check configuration". RasterProp doesn't work inside the Alcor capsule but does work with any other IVA's that have RasterProp. Does anyone have any ideas?Did you place the aset_prop folder inside the ASET folder? I did that mistake myself :-) Quote Link to comment Share on other sites More sharing options...
nhnifong Posted October 14, 2014 Share Posted October 14, 2014 I couldn't insert a new line by pressing enter when editing the drop down below the ship title (the place where action groups are edited) I just get a sort of line raised dash symbol. However I was able to get around this by pasting a newline character.Just putting this out there in case anyone else is having that problemKSP 0.25Ubuntu 14.04 Quote Link to comment Share on other sites More sharing options...
Kaa253 Posted October 19, 2014 Share Posted October 19, 2014 I couldn't insert a new line by pressing enter when editing the drop down below the ship title (the place where action groups are edited) I just get a sort of line raised dash symbol. However I was able to get around this by pasting a newline character.Just putting this out there in case anyone else is having that problemKSP 0.25Ubuntu 14.04I have had that problem since KSP v0.24. I am fairly sure it is a Linux only problem and applies to stock KSP. I did post a bug report at KSP bug tracker on it. Thank you for the workaround tip... paste a newline character, brilliant! Quote Link to comment Share on other sites More sharing options...
John FX Posted October 19, 2014 Share Posted October 19, 2014 (edited) Hello, I`m getting blank windows when I go IVA.Here is my log, can anyone see what might be causing it?http://www./view/u4t18c2uv1y7a0r/KSP.logI`ve had a look but the only error I can find is from RPM and FAR but they do not seem connected. I also can`t find why there is a 2 minute pause going to the space centre. I must get better at finding errors in my own logs...Any clues?It seems to be a problem with the ALCOR capsule only. The MK1-2 windows work fine. I`ll reinstall ALCOR and see if that helpsEDIT : No joy so I`ve tried removing all my mods and adding them until it breaks. I`m suspecting some sort of conflict between LoadOnDemand and the ALCOR capsule. Edited October 19, 2014 by John FX Quote Link to comment Share on other sites More sharing options...
Virtualgenius Posted October 19, 2014 Share Posted October 19, 2014 Try using ATM instead of LOD and see if that helps Quote Link to comment Share on other sites More sharing options...
Las-pen Posted October 20, 2014 Share Posted October 20, 2014 (edited) Makes the perfect Münar landing module and I wouldn't mind if it replaced the Stock Lander canIt's just... And I mean no offence with this, but is there any way to remove the Aset logo on the side of it. It keeps bugging me. Edited October 20, 2014 by Las-pen Quote Link to comment Share on other sites More sharing options...
John FX Posted October 20, 2014 Share Posted October 20, 2014 Try using ATM instead of LOD and see if that helpsI was using nothing at all in preference to ATM and when LOD came about I wanted to try that as it does not reduce texture quality. You are suggesting I go back to nothing as I prefer that to the ugly jaggies.I`d rather try to get the maker/makers of the ALCOR capsule to see if a different method of displaying outside which does not conflict with LOD is possible... Quote Link to comment Share on other sites More sharing options...
Virtualgenius Posted October 20, 2014 Share Posted October 20, 2014 I am using ATM and suffer no degradation in look or functionality and i am using the aggressive version but I am using opengl over dx9 Quote Link to comment Share on other sites More sharing options...
KoolBreeze420 Posted October 24, 2014 Share Posted October 24, 2014 I am getting a rasterprop monitor configuration error when I try to launch the alcor pod on KSP 0.25 perhaps another mod is interfering or this is a known bug and maybe I have the wrong version could any one advise on what could be wrong? Quote Link to comment Share on other sites More sharing options...
Virtualgenius Posted October 24, 2014 Share Posted October 24, 2014 (edited) I have alcor working fine on 25 with the latest rpm just make sure the folder structure is correct Edited October 24, 2014 by Virtualgenius Quote Link to comment Share on other sites More sharing options...
KoolBreeze420 Posted October 24, 2014 Share Posted October 24, 2014 I have alcor working fine on 25 with the latest rpm just make sure the folder structure is correctSO then another mod must be interfering here I go again starting over with the mod installation to find the culprit. I wonder if installation order can effect mods and how they interact with each other anyone know? Quote Link to comment Share on other sites More sharing options...
Crater Posted October 24, 2014 Share Posted October 24, 2014 SO then another mod must be interfering here I go again starting over with the mod installation to find the culprit. I wonder if installation order can effect mods and how they interact with each other anyone know?Installation order only affects mods when two different mods contain two different versions of the same file, and one overwrites the other.For example, if you install a mod that bundles an old version of RPM over the top of a newer one, then you'll have the old version in-game and it will have issues. Just watch out for bundled mods overwriting each other, and if in doubt, go to the release thread for the bundled mod (e.g. RPM), and download the latest version. Quote Link to comment Share on other sites More sharing options...
KoolBreeze420 Posted October 24, 2014 Share Posted October 24, 2014 Installation order only affects mods when two different mods contain two different versions of the same file, and one overwrites the other.For example, if you install a mod that bundles an old version of RPM over the top of a newer one, then you'll have the old version in-game and it will have issues. Just watch out for bundled mods overwriting each other, and if in doubt, go to the release thread for the bundled mod (e.g. RPM), and download the latest version.Thanks I believe I found the problem finally. I installed the asset props into the gamedata folder I went and reread the alcore pod info and installed it into the asset folder and presto the screens inside the pod are now working..Thanks for the info.... Quote Link to comment Share on other sites More sharing options...
Enthalpy Posted October 24, 2014 Share Posted October 24, 2014 Its written Rendez-vous, w/ the - in the middle. Quote Link to comment Share on other sites More sharing options...
KoolBreeze420 Posted October 24, 2014 Share Posted October 24, 2014 (edited) http://s1192.photobucket.com/user/Gate420/media/screenshot2.png.htmlThis is a shot of Kerbin after installing the Aset alcor pod is this normal or could another mod be interfering causing this?I Have slowly deleted and reinstalled mods at random and this is the result each time I get to the alcor pod. I thought instead of spending another full night doing this I would find out of it's normal or a known mod combined with the alcor pod causes this thanks Edited October 24, 2014 by KoolBreeze420 Quote Link to comment Share on other sites More sharing options...
smurphy34 Posted October 25, 2014 Share Posted October 25, 2014 Its written Rendez-vous, w/ the - in the middle.Are you serious? Quote Link to comment Share on other sites More sharing options...
smurphy34 Posted October 25, 2014 Share Posted October 25, 2014 http://s1192.photobucket.com/user/Gate420/media/screenshot2.png.htmlhttp://s1192.photobucket.com/user/Gate420/media/screenshot2.png.htmlThis is a shot of Kerbin after installing the Aset alcor pod is this normal or could another mod be interfering causing this?I Have slowly deleted and reinstalled mods at random and this is the result each time I get to the alcor pod. I thought instead of spending another full night doing this I would find out of it's normal or a known mod combined with the alcor pod causes this thanksThat's weird, can you post your log? Quote Link to comment Share on other sites More sharing options...
BudgetHedgehog Posted October 25, 2014 Share Posted October 25, 2014 http://s1192.photobucket.com/user/Gate420/media/screenshot2.png.htmlhttp://s1192.photobucket.com/user/Gate420/media/screenshot2.png.htmlThis is a shot of Kerbin after installing the Aset alcor pod is this normal or could another mod be interfering causing this?I Have slowly deleted and reinstalled mods at random and this is the result each time I get to the alcor pod. I thought instead of spending another full night doing this I would find out of it's normal or a known mod combined with the alcor pod causes this thanksThat's weird, can you post your log?Not an ALCOR problem, it's due to EVE. Deleting the CityLights.dll from GameData\EnvironmentalVisualEnhancements\Plugins fixes it. If you want lights, then install them properly. Quote Link to comment Share on other sites More sharing options...
KoolBreeze420 Posted October 25, 2014 Share Posted October 25, 2014 (edited) That's weird, can you post your log?What log? Yes it is weird I believe that another mod is the culprit and is somehow interacting with alcor but since I can only recreate when I add the alcor pod it's been very hard.. SO alcor pod combined with the EnvironmentalVisualEnhancements CityLights.dll casues this the other poster says it's not alcor which makes no sense to me since it can only be recreated using those 2 mods...I am still interested in the log you were speaking off for next time I am asking for help I can post it.. Edited October 25, 2014 by KoolBreeze420 Quote Link to comment Share on other sites More sharing options...
smurphy34 Posted October 25, 2014 Share Posted October 25, 2014 What log? Yes it is weird I believe that another mod is the culprit and is somehow interacting with alcor but since I can only recreate when I add the alcor pod it's been very hard.. SO alcor pod combined with the EnvironmentalVisualEnhancements CityLights.dll casues this the other poster says it's not alcor which makes no sense to me since it can only be recreated using those 2 mods...I am still interested in the log you were speaking off for next time I am asking for help I can post it..If you had clicked on the "log" link I had in my reply you would have found out about logs. Here is a more blatant link http://forum.kerbalspaceprogram.com/threads/92229-How-To-Get-Support-%28READ-FIRST%29Please go there and read the whole OP, it will help you immensely and save you lots of time troubleshooting KSP and mods. Quote Link to comment Share on other sites More sharing options...
McD92 Posted October 29, 2014 Share Posted October 29, 2014 This is listed as not working in .25. I loved it in my old game and I would greatly enjoy continuing its use. Does anyone know if it is compatible? Had to clear the local files since I was using a variety of mods that, sadly, didnt update. Broke the save :'( Quote Link to comment Share on other sites More sharing options...
Buzzou Posted October 30, 2014 Share Posted October 30, 2014 This is listed as not working in .25. I loved it in my old game and I would greatly enjoy continuing its use. Does anyone know if it is compatible? Had to clear the local files since I was using a variety of mods that, sadly, didnt update. Broke the save :'(yeah it works fine for me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.