[WIP] MSI's Infernal Robotics - Model Rework (v02 Pre-Release Beta)

Alewx · June 20, 2014

For those eagerly awaiting Foldatrons (which I intended to finish before starting Extendatrons), I'm afraid you'll have to wait a fair bit longer. Like with the original rework lineup there's a lot of dependencies between the parts meaning that I'm having to think of certain design decisions now rather than later when I originally planned. I want it to be possible to make a full Athlete with my athlete-inspired parts, and it isn't at the moment...
Basically, I need to make some wheels (or at least finalise their dimensions so the foldatrons will work with them once created)
https://www.cubby.com/pl/IR_ActualAthlete.png/_627aa3e518454999b5fdbece903672d4
Now, that being said, I have 5 foldatron parts that aren't dependent on wheels being a thing so I may try and finish them up. No promises though as there may be things I need to alter based on changes brought on by the wheels. Also, I have no clue how to make wheels, so this could be a long process
Thanks

That looks extremly cool, but also it scares me to death.

Camacha · June 20, 2014

I like these foldatrons, but the engineer in me is screaming that those open hinges are not going to end well

ZodiusInfuser · June 20, 2014

I like these foldatrons, but the engineer in me is screaming that those open hinges are not going to end well

I silenced my inner engineer long ago. Probably not the best decision seeing as my job kind of relies on him.

"I'll add a chamfer to this section. Why? Because it's cool! So no mechanical benefit then? No"

sirkut · June 20, 2014

It's a game with green aliens. I've had to silence my engineer/applied physics/etc minds quite some time ago.

GodsPrototype · June 20, 2014

How does this mod work? I can't seem to get the rotatron to work. It just rotates randomly and the keys I set don't do anything.

ZodiusInfuser · June 20, 2014

How does this mod work? I can't seem to get the rotatron to work. It just rotates randomly and the keys I set don't do anything.

Its a parts pack, so works the same as the normal IR parts. No extra code is required. If you have issues I suggest you check if they occur with the normal IR parts too.

Or did you place down the Uncontrolled rotatron? Because that will not respond to movement commands.

GodsPrototype · June 20, 2014

Excuse my stupidity. I did have the uncontrolled rotatron. I'm a noob when it comes to mods, my apologies. Thank you. This is a very nice mod

ZodiusInfuser · June 20, 2014

Excuse my stupidity. I did have the uncontrolled rotatron. I'm a noob when it comes to mods, my apologies. Thank you. This is a very nice mod

No problem. I did try to make the uncontrolled one visually different from the other, but there's only so much that can be done with a cylinder

GodsPrototype · June 20, 2014

It's ok, I should have just looked a little at the name. I've got to learn to carefully read stuff sometimes. Btw, do the robotic struts reconnect, or do the just disconnect? Thanks

ZodiusInfuser · June 20, 2014

It's ok, I should have just looked a little at the name. I've got to learn to carefully read stuff sometimes. Btw, do the robotic struts reconnect, or do the just disconnect? Thanks

Just disconnect. Those ones are intended for early on in the tech tree, where you'll only have a few robotics parts and want to hold them steady during launch. Marce and myself are working on a version that will come much later on in the tree that is reuseable (and much more!), for when people have advanced constructions.

Devo · June 20, 2014

For those eagerly awaiting Foldatrons (which I intended to finish before starting Extendatrons), I'm afraid you'll have to wait a fair bit longer. Like with the original rework lineup there's a lot of dependencies between the parts meaning that I'm having to think of certain design decisions now rather than later when I originally planned. I want it to be possible to make a full Athlete with my athlete-inspired parts, and it isn't at the moment...
Basically, I need to make some wheels (or at least finalise their dimensions so the foldatrons will work with them once created)
https://www.cubby.com/pl/IR_ActualAthlete.png/_627aa3e518454999b5fdbece903672d4
Now, that being said, I have 5 foldatron parts that aren't dependent on wheels being a thing so I may try and finish them up. No promises though as there may be things I need to alter based on changes brought on by the wheels. Also, I have no clue how to make wheels, so this could be a long process
Thanks

that looks awesome! yeah wheels are a real pain in the butt, if you are doing wheels that just turn its ok, its the suspension parts that do my head in.

BlackSoldierB · June 20, 2014

Should i delete the "Legacy" parts and only use the "rework", i am currently not using the old parts (because of the update to 0.16).

Edit: The rework parts are not in career, is that because its WIP?

Edited June 20, 2014 by BlackSoldierB

sirkut · June 20, 2014

Should i delete the "Legacy" parts and only use the "rework", i am currently not using the old parts (because of the update to 0.16).
Edit: The rework parts are not in career, is that because its WIP?

You can but you aren't making any sense. The update to 0.16 is independent to the parts.

ZodiusInfuser · June 20, 2014

Edit: The rework parts are not in career, is that because its WIP?

Well they are, but all in the same node towards the end of the tree (go back to R&D to unlock if they haven't already). I'm open to suggestions of proper placement though.

BudgetHedgehog · June 20, 2014

So I've no idea what's going on here. I have the parts on the craft, but for some reason I can't make the IR button visible in flight. My ad hoc landing legs are stuck Any ideas?

sirkut · June 21, 2014

Log file by chance? I'm shocked that you of all people are having problems.

BudgetHedgehog · June 21, 2014

Log file by chance?

Sure thing. I warn you, it's zero help:



(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

6/21/2014 1:15:15 AM,KerbalAlarmClock,Adding DrawGUI to PostRender Queue

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

ArgumentException: Getting control 0's position in a group with only 0 controls when doing Repaint
Aborting
  at UnityEngine.GUILayoutGroup.GetNext () [0x00000] in <filename unknown>:0 

  at UnityEngine.GUILayoutUtility.BeginLayoutGroup (UnityEngine.GUIStyle style, UnityEngine.GUILayoutOption[] options, System.Type LayoutType) [0x00000] in <filename unknown>:0 

  at UnityEngine.GUILayout.BeginVertical (UnityEngine.GUIContent content, UnityEngine.GUIStyle style, UnityEngine.GUILayoutOption[] options) [0x00000] in <filename unknown>:0 

  at UnityEngine.GUILayout.BeginVertical (UnityEngine.GUILayoutOption[] options) [0x00000] in <filename unknown>:0 

  at KerbalAlarmClock.KACWorker.FillWindow (Int32 intWindowID) [0x00000] in <filename unknown>:0 

  at UnityEngine.GUILayout+LayoutedWindow.DoWindow (Int32 windowID) [0x00000] in <filename unknown>:0 

  at UnityEngine.GUI.CallWindowDelegate (UnityEngine.WindowFunction func, Int32 id, UnityEngine.GUISkin _skin, Int32 forceRect, Single width, Single height, UnityEngine.GUIStyle style) [0x00000] in <filename unknown>:0 

(Filename:  Line: -1)

File 'H:/Games and software/Kerbal Space Program (235)/KSP_Data/../saves/Aaaa/kethane.cfg' does not exist

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[Kethane] Error inspecting assembly 'TweakScale_RealFuels': 
System.Reflection.ReflectionTypeLoadException: The classes in the module cannot be loaded.

  at (wrapper managed-to-native) System.Reflection.Assembly:GetTypes (bool)

  at System.Reflection.Assembly.GetTypes () [0x00000] in <filename unknown>:0 

  at Kethane.KethaneData.createGenerator (.ConfigNode generatorNode) [0x00000] in <filename unknown>:0 

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[Kethane] Error inspecting assembly 'TweakScale_ModularFuelTanks': 
System.Reflection.ReflectionTypeLoadException: The classes in the module cannot be loaded.

  at (wrapper managed-to-native) System.Reflection.Assembly:GetTypes (bool)

  at System.Reflection.Assembly.GetTypes () [0x00000] in <filename unknown>:0 

  at Kethane.KethaneData.createGenerator (.ConfigNode generatorNode) [0x00000] in <filename unknown>:0 

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Kethane deposits loaded (58ms)

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[PlanetariumCamera]: Focus: Kerbin

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[Tracking Station]: SetVessel(Mun Explorer 2)

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[PlanetariumCamera]: Focus: Mun Explorer 2

....

Game State Saved as persistent

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[HighLogic]: =========================== Scene Change : From TRACKSTATION to FLIGHT =====================

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

...

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[PlanetariumCamera]: Focus: Kerbin

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[Kethane] Saving settings

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KeyNotFoundException: The given key was not present in the dictionary.
  at System.Collections.Generic.Dictionary`2[Vessel,MapObject].get_Item (.Vessel key) [0x00000] in <filename unknown>:0 

  at SpaceTracking.OnDestroy () [0x00000] in <filename unknown>:0 

(Filename:  Line: -1)

...


[FLIGHT GLOBALS]: Switching To Vessel Mun Explorer 2 ---------------------- 

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

setting new dominant body: Kerbin
FlightGlobals.mainBody: Kerbin

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Destroyed

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Destroyed

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Destroyed

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Initialized

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Enabled=True

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Initialized

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Enabled=True

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Initialized

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Enabled=True

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Reference Frame: Rotating

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Cannot find fx group of that name for decoupler

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Cannot find fx group of that name for decoupler

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part K-P0110 cannot load module #17. It only has 17 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part K-P0110 cannot load module #18. It only has 17 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part K-P0110 cannot load module #19. It only has 17 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Large.Crewed.Lab cannot load module #4. It only has 4 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part science.module cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part GooExperiment cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part GooExperiment cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KW2mtankPancake cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part engineLargeSkipper cannot load module #10. It only has 10 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part decoupler1-2 cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part decoupler1-2 cannot load module #4. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KzResizableFairingBaseRing cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KzResizableFairingBaseRing cannot load module #4. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KW3mtankL1 cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KWSASmodule3mHalf cannot load module #4. It only has 4 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KWSASmodule3mHalf cannot load module #4. It only has 4 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Size3AdvancedEngine cannot load module #11. It only has 11 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Retrotron cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Retrotron cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Retrotron cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Retrotron cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Retrotron cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part Retrotron cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Pivotron.NinetyOffset cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Segment.TubeLarge.5m00 cannot load module #0. It only has 0 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part QuantumStrut cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Pivotron.NinetyOffset cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Segment.TubeLarge.5m00 cannot load module #0. It only has 0 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part QuantumStrut cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Pivotron.NinetyOffset cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Segment.TubeLarge.5m00 cannot load module #0. It only has 0 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part QuantumStrut cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Pivotron.NinetyOffset cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part IR.Segment.TubeLarge.5m00 cannot load module #0. It only has 0 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part QuantumStrut cannot load module #2. It only has 2 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KWRadBattLargeL cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part spotLight1 cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KWRadBattLargeL cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part spotLight1 cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KWRadBattLargeL cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part spotLight1 cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part KWRadBattLargeL cannot load module #1. It only has 1 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part spotLight1 cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part largeSolarPanel cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part largeSolarPanel cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part largeSolarPanel cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part largeSolarPanel cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part sensorBarometer cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part sensorAccelerometer cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part sensorGravimeter cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part sensorThermometer cannot load module #3. It only has 3 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part mediumDishAntenna cannot load module #5. It only has 5 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part mediumDishAntenna cannot load module #5. It only has 5 modules defined

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PartModule is null.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Camera Mode: AUTO

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

stage manager resuming...

...

[SCAN Kethane] Searching For Kethane Assembly...

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[SCAN Kethane] Kethane Assembly Found, Launching Watcher

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[SCAN Kethane] Starting Watcher

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Tac.FuelBalanceController[FFDD1E76][3987.99]: Start

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

NullReferenceException: Object reference not set to an instance of an object
  at AntennaRange.ModuleLimitedDataTransmitter.CanTransmit () [0x00000] in <filename unknown>:0 

  at AntennaRange.ARFlightController.FixedUpdate () [0x00000] in <filename unknown>:0 

(Filename:  Line: -1)

Tac.FuelBalanceController[FFDD1E76][3987.96]: Rebuilding resource lists.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

FlightEngineer: OnStart (Orbital)

...


File 'H:/Games and software/Kerbal Space Program (235)/KSP_Data/../saves/Aaaa/kethane.cfg' does not exist

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[Kethane] Error inspecting assembly 'TweakScale_RealFuels': 
System.Reflection.ReflectionTypeLoadException: The classes in the module cannot be loaded.

  at (wrapper managed-to-native) System.Reflection.Assembly:GetTypes (bool)

  at System.Reflection.Assembly.GetTypes () [0x00000] in <filename unknown>:0 

  at Kethane.KethaneData.createGenerator (.ConfigNode generatorNode) [0x00000] in <filename unknown>:0 

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[Kethane] Error inspecting assembly 'TweakScale_ModularFuelTanks': 
System.Reflection.ReflectionTypeLoadException: The classes in the module cannot be loaded.

  at (wrapper managed-to-native) System.Reflection.Assembly:GetTypes (bool)

  at System.Reflection.Assembly.GetTypes () [0x00000] in <filename unknown>:0 

  at Kethane.KethaneData.createGenerator (.ConfigNode generatorNode) [0x00000] in <filename unknown>:0 

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Kethane deposits loaded (53ms)

...

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Game State Saved as persistent

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

[SCAN Kethane] Initialized

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Destroyed

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Destroyed

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Destroyed

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Initialized

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Enabled=True

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Initialized

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Enabled=True

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Initialized

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Clouds: Volume Enabled=True

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

...

Unpacking Mun Explorer 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: K-P0110 Command Pod Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

K-P0110 Command Pod: Geometry model created; Size: [2.5, 1.34000015258789, 2.50000023841858], LD [2.17765998840332, 2.1776602268219, 0], UD [1.23378396034241, 1.23689222335815, 0]

Surface area: 7.18390836504179

Fineness Ratio: 0.536000035476683

TaperRatio: 0.567277734267077

Cross Sectional Area: 4.90873898936784

Cross Sectional Tapered Area: 2.52595307490236

Major-minor axis ratio: 0.999999904632577

Centroid: [2.95639038085938E-05, -0.330211344028756, -2.57492065429688E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: K-P0110 Command Pod Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Mobile Processing Lab MPL-LG-2 Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Mobile Processing Lab MPL-LG-2: Geometry model created; Size: [2.64320087432861, 3.66031408309937, 2.6642370223999], LD [2.64320087432861, 2.64416265487671, 0], UD [2.63151288032532, 2.64416289329529, 0]

Surface area: 30.3666671996966

Fineness Ratio: 1.37931489894797

TaperRatio: 0.997789492717844

Cross Sectional Area: 5.53086310910243

Cross Sectional Tapered Area: 0.0242409651258645

Major-minor axis ratio: 0.99210425052485

Centroid: [-0.0048525333404541, -0.00949062519228461, 0.00677573680877686]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Mobile Processing Lab MPL-LG-2 Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: SC-9001 Science Jr. Transforms: 18

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

SC-9001 Science Jr.: Geometry model created; Size: [1.26070916652679, 1.13530778884888, 1.25000059604645], LD [1.25000035762787, 1.25000059604645, 0], UD [1.25000035762787, 1.25000059604645, 0]

Surface area: 4.45834496198661

Fineness Ratio: 0.904371987374035

TaperRatio: 1

Cross Sectional Area: 1.23769892014114

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 1.00856685229928

Centroid: [-0.010575532913208, 0.0464503169059753, 4.42266464233398E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: SC-9001 Science Jr. Transforms: 18

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Mystery GooÃ¢â€žÂ¢ Containment Unit Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Mystery GooÃ¢â€žÂ¢ Containment Unit: Geometry model created; Size: [0.425696790218353, 1.16246485710144, 0.561534464359283], LD [0.425696730613709, 0.561534404754639, 0], UD [0.425696730613709, 0.561534404754639, 0]

Surface area: 1.80267963785364

Fineness Ratio: 2.35500011109104

TaperRatio: 1

Cross Sectional Area: 0.187744262313539

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.75809557068608

Centroid: [-0.00424996018409729, 0.000618100166320801, -0.559016987797804]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Mystery GooÃ¢â€žÂ¢ Containment Unit Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Mystery GooÃ¢â€žÂ¢ Containment Unit Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Mystery GooÃ¢â€žÂ¢ Containment Unit: Geometry model created; Size: [0.425696849822998, 1.16246485710144, 0.561534345149994], LD [0.425696790218353, 0.561534285545349, 0], UD [0.425696790218353, 0.561534225940704, 0]

Surface area: 1.80267947459692

Fineness Ratio: 2.35500025327551

TaperRatio: 0.999999939624424

Cross Sectional Area: 0.187744248744249

Cross Sectional Tapered Area: 2.31078103288117E-08

Major-minor axis ratio: 0.758095837769795

Centroid: [-0.0042518824338913, 0.000551449113797009, -0.558944418327883]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Mystery GooÃ¢â€žÂ¢ Containment Unit Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW Rocketry SB-2 LFT Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW Rocketry SB-2 LFT: Geometry model created; Size: [2.53649973869324, 0.937610387802124, 2.53650045394897], LD [2.53649950027466, 2.53650045394897, 0], UD [2.53649973869324, 2.53650045394897, 0]

Surface area: 7.47148890535129

Fineness Ratio: 0.369647290438513

TaperRatio: 1.00000004699755

Cross Sectional Area: 5.05312041653176

Cross Sectional Tapered Area: 4.74968545507114E-07

Major-minor axis ratio: 0.999999718014741

Centroid: [-2.07424163818359E-05, -5.95674982222238E-05, 1.68085098266602E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW Rocketry SB-2 LFT Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Rockomax "Skipper" Liquid Engine Transforms: 16

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Rockomax "Skipper" Liquid Engine: Geometry model created; Size: [2.5, 2.3750011920929, 2.50000071525574], LD [1.25, 1.25000023841858, 0], UD [2.5, 2.50000071525574, 0]

Surface area: 13.9899135864331

Fineness Ratio: 0.950000340938519

TaperRatio: 2.00000009536742

Cross Sectional Area: 4.90873992563541

Cross Sectional Tapered Area: 3.68155506126009

Major-minor axis ratio: 0.999999713897787

Centroid: [-2.47955322265625E-05, -0.933013994657256, -2.57492065429688E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Rockomax "Skipper" Liquid Engine Transforms: 16

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Rockomax Brand Decoupler Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Rockomax Brand Decoupler: Geometry model created; Size: [2.67383575439453, 0.842070400714874, 2.67383623123169], LD [2.66316413879395, 2.66316485404968, 0], UD [2.67383575439453, 2.67383623123169, 0]

Surface area: 7.05936311696999

Fineness Ratio: 0.314929712584556

TaperRatio: 1.00400707369208

Cross Sectional Area: 5.6151247783856

Cross Sectional Tapered Area: 0.0447313953581799

Major-minor axis ratio: 0.999999821665533

Centroid: [4.45842742919922E-05, 0.053756724326798, 3.7074089050293E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Rockomax Brand Decoupler Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Fairing Base Ring Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Fairing Base Ring: Geometry model created; Size: [3.45005106925964, 0.787073135375977, 3.45000410079956], LD [3.45005083084106, 3.45000410079956, 0], UD [3.45005083084106, 3.45000386238098, 0]

Surface area: 8.53075573711632

Fineness Ratio: 0.228135316596091

TaperRatio: 0.999999965446858

Cross Sectional Area: 9.34835113010056

Cross Sectional Tapered Area: 6.46029755714571E-07

Major-minor axis ratio: 1.00001361403022

Centroid: [6.22272491455078E-05, 0.296406972346032, -3.57627868652344E-06]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Fairing Base Ring Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW Rocketry SC-1 LFT Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW Rocketry SC-1 LFT: Geometry model created; Size: [3.75000858306885, 3.88573789596558, 3.75001430511475], LD [3.75000286102295, 3.75001049041748, 0], UD [3.75000739097595, 3.75000286102295, 0]

Surface area: 45.777843138218

Fineness Ratio: 1.03619361004554

TaperRatio: 0.999999586741865

Cross Sectional Area: 11.0447290841381

Cross Sectional Tapered Area: 9.1286231790647E-06

Major-minor axis ratio: 0.999998474126914

Centroid: [-1.97887420654297E-05, 4.14556156052015E-05, -3.46899032592773E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW Rocketry SC-1 LFT Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW TRQ-3-SAS Half Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW TRQ-3-SAS Half: Geometry model created; Size: [4.00658655166626, 1.27274870872498, 2.21167230606079], LD [4.00658655166626, 2.21167230606079, 0], UD [4.00658655166626, 2.21167230606079, 0]

Surface area: 12.4317234167211

Fineness Ratio: 0.409358548058323

TaperRatio: 1

Cross Sectional Area: 6.95961459475329

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 1.8115642813299

Centroid: [-0.0693469047546387, -1.5556812286377E-05, -2.06400910764933]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW TRQ-3-SAS Half Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW TRQ-3-SAS Half Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW TRQ-3-SAS Half: Geometry model created; Size: [4.00658512115479, 1.27274870872498, 2.21167230606079], LD [4.00658512115479, 2.21167230606079, 0], UD [4.00658512115479, 2.21167206764221, 0]

Surface area: 12.4317203184745

Fineness Ratio: 0.409358642231346

TaperRatio: 0.999999961658297

Cross Sectional Area: 6.95961210989282

Cross Sectional Tapered Area: 5.82195266394722E-07

Major-minor axis ratio: 1.81156363452907

Centroid: [-0.069326639175415, -0.000117486095428498, -2.06401693820953]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW TRQ-3-SAS Half Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Kerbodyne KR-2L Advanced Engine Transforms: 25

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Kerbodyne KR-2L Advanced Engine: Geometry model created; Size: [3.76938104629517, 4.05433416366577, 3.79850363731384], LD [3.76779985427856, 3.76780033111572, 0], UD [3.76938104629517, 3.76938152313232, 0]

Surface area: 48.0007899260443

Fineness Ratio: 1.07145770136982

TaperRatio: 1.00041965921166

Cross Sectional Area: 11.2453368841542

Cross Sectional Tapered Area: 0.0093601640562609

Major-minor axis ratio: 0.992333141205238

Centroid: [-2.37226486206055E-05, -0.528074469016053, -0.0291433334350586]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Kerbodyne KR-2L Advanced Engine Transforms: 25

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Geometry model created; Size: [0.16000010073185, 0.111920461058617, 0.703280210494995], LD [0.16000010073185, 0.703280210494995, 0], UD [0.16000010073185, 0.703280210494995, 0]

Surface area: 0.151768346898826

Fineness Ratio: 0.259291123875075

TaperRatio: 1

Cross Sectional Area: 0.0883768533479858

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.227505478391373

Centroid: [4.96208667755127E-06, 0.0367595572024584, -0.00290647149085999]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Geometry model created; Size: [0.160000205039978, 0.11192062497139, 0.703280687332153], LD [0.160000205039978, 0.703280687332153, 0], UD [0.160000205039978, 0.703280687332153, 0]

Surface area: 0.15176867133866

Fineness Ratio: 0.259291329068696

TaperRatio: 1

Cross Sectional Area: 0.0883769708843018

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.227505472454999

Centroid: [-1.81049108505249E-06, 0.0367694646120071, -0.00292512774467468]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Geometry model created; Size: [0.160000041127205, 0.1119205057621, 0.703280448913574], LD [0.160000041127205, 0.703280448913574, 0], UD [0.160000041127205, 0.703280448913574, 0]

Surface area: 0.15176843895469

Fineness Ratio: 0.259291173733843

TaperRatio: 1

Cross Sectional Area: 0.088376850385633

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.227505316512598

Centroid: [-6.10947608947754E-07, 0.0367576591670513, -0.00289800763130188]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Geometry model created; Size: [0.159999996423721, 0.111920475959778, 0.703280210494995], LD [0.159999996423721, 0.703280210494995, 0], UD [0.159999996423721, 0.703280210494995, 0]

Surface area: 0.151768348767545

Fineness Ratio: 0.259291189726804

TaperRatio: 1

Cross Sectional Area: 0.088376795732871

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.227505330074775

Centroid: [1.75908207893372E-05, 0.0367671176791191, -0.00300022959709167]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Geometry model created; Size: [0.160000026226044, 0.11192049831152, 0.703280091285706], LD [0.160000026226044, 0.703280091285706, 0], UD [0.160000026226044, 0.703280091285706, 0]

Surface area: 0.151768363359212

Fineness Ratio: 0.259291268363994

TaperRatio: 1

Cross Sectional Area: 0.0883767972140488

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.227505411014179

Centroid: [1.75833702087402E-06, 0.0367720015347004, -0.00296863913536072]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Geometry model created; Size: [0.160000070929527, 0.111920490860939, 0.703280389308929], LD [0.160000070929527, 0.703280389308929, 0], UD [0.160000070929527, 0.703280389308929, 0]

Surface area: 0.151768413508775

Fineness Ratio: 0.25929114816296

TaperRatio: 1

Cross Sectional Area: 0.0883768593569561

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.227505378170362

Centroid: [4.17232513427734E-07, 0.0367564596235752, -0.00301188230514526]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RT-14R "Retrotron" Separation Assistant: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RT-14R "Retrotron" Separation Assistant Transforms: 7

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Joint Pivotron - Basic (90 offset): Geometry model created; Size: [0.600000023841858, 0.639999866485596, 0.639999985694885], LD [0.500000059604645, 0.63999992609024, 0], UD [0.600000023841858, 0.579999923706055, 0]

Surface area: 1.16615891617694

Fineness Ratio: 1.0322578412313

TaperRatio: 1.03508768627628

Cross Sectional Area: 0.301592899987718

Cross Sectional Tapered Area: 0.0182212194893853

Major-minor axis ratio: 0.937500058207662

Centroid: [2.98023223876953E-07, -0.0671050299802478, 0.13990905880928]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Geometry model created; Size: [0.252500534057617, 5, 0.252500355243683], LD [0.252499997615814, 0.252500057220459, 0], UD [0.252499997615814, 0.252500057220459, 0]

Surface area: 3.9662611558402

Fineness Ratio: 19.8019453269392

TaperRatio: 1

Cross Sectional Area: 0.0500742180152985

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 1.000000708173

Centroid: [-6.91413879394531E-06, -4.60147857666016E-05, 3.13073396682739E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Geometry model created; Size: [0.0688987895846367, 0.0688988119363785, 0.0722610652446747], LD [0.0688987895846367, 0.0722610652446747, 0], UD [0.0688987895846367, 0.0722610652446747, 0]

Surface area: 0.0152771665490082

Fineness Ratio: 0.976181394061222

TaperRatio: 1

Cross Sectional Area: 0.0039102617807006

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.953470438767358

Centroid: [-2.38418579101563E-05, 4.57987189292908E-05, -0.00628871098160744]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Joint Pivotron - Basic (90 offset): Geometry model created; Size: [0.600000083446503, 0.64000004529953, 0.640000104904175], LD [0.500000059604645, 0.640000104904175, 0], UD [0.600000083446503, 0.580000102519989, 0]

Surface area: 1.166159451722

Fineness Ratio: 1.03225798078433

TaperRatio: 1.0350877330574

Cross Sectional Area: 0.301592986124342

Cross Sectional Tapered Area: 0.0182212499180824

Major-minor axis ratio: 0.937499976716939

Centroid: [-2.90274620056152E-05, -0.0671074701063789, 0.139936834573746]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Geometry model created; Size: [0.252500176429749, 5.00000095367432, 0.252500146627426], LD [0.252500027418137, 0.252500027418137, 0], UD [0.252500057220459, 0.252500057220459, 0]

Surface area: 3.96626214641141

Fineness Ratio: 19.8019713072866

TaperRatio: 1.00000011802899

Cross Sectional Area: 0.0500741057215781

Cross Sectional Tapered Area: 1.1820380061588E-08

Major-minor axis ratio: 1.00000011802893

Centroid: [6.13927841186523E-06, -1.42067572443949E-05, 2.00271606445313E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Geometry model created; Size: [0.0688987895846367, 0.0688988268375397, 0.0722610726952553], LD [0.0688987895846367, 0.0722610726952553, 0], UD [0.0688987895846367, 0.0722610726952553, 0]

Surface area: 0.0152771706594397

Fineness Ratio: 0.976181553661862

TaperRatio: 1

Cross Sectional Area: 0.00391026218387374

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.953470340458434

Centroid: [1.56387686729431E-05, 0.000119946897029877, -0.0061938688158989]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Joint Pivotron - Basic (90 offset): Geometry model created; Size: [0.599999964237213, 0.639999985694885, 0.639999985694885], LD [0.499999940395355, 0.639999985694885, 0], UD [0.599999964237213, 0.579999983310699, 0]

Surface area: 1.16615910343045

Fineness Ratio: 1.0322580831232

TaperRatio: 1.03508774039561

Cross Sectional Area: 0.301592870027157

Cross Sectional Tapered Area: 0.0182212461730101

Major-minor axis ratio: 0.937499965075403

Centroid: [9.29832458496094E-06, -0.0671184371998521, 0.139920502901077]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Geometry model created; Size: [0.252500295639038, 5.00000047683716, 0.252500057220459], LD [0.252500057220459, 0.252500057220459, 0], UD [0.252500057220459, 0.252500057220459, 0]

Surface area: 3.96626200222617

Fineness Ratio: 19.8019682502213

TaperRatio: 1

Cross Sectional Area: 0.0500741116317601

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 1.00000094423178

Centroid: [-1.76280736923218E-05, -5.65052032470703E-05, 1.18613243103027E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Geometry model created; Size: [0.0688987895846367, 0.0688988268375397, 0.0722610801458359], LD [0.0688987895846367, 0.0722610801458359, 0], UD [0.0688987895846367, 0.0722610801458359, 0]

Surface area: 0.0152771714657865

Fineness Ratio: 0.976181502137874

TaperRatio: 1

Cross Sectional Area: 0.00391026258704688

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.953470242149529

Centroid: [2.14725732803345E-05, 1.17123126983643E-05, -0.00636705011129379]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Joint Pivotron - Basic (90 offset): Geometry model created; Size: [0.600000143051147, 0.639999985694885, 0.64000004529953], LD [0.500000059604645, 0.639999985694885, 0], UD [0.600000143051147, 0.579999983310699, 0]

Surface area: 1.16615925323326

Fineness Ratio: 1.03225788464782

TaperRatio: 1.03508778901128

Cross Sectional Area: 0.301592987996875

Cross Sectional Tapered Area: 0.0182212756654418

Major-minor axis ratio: 0.937500157160673

Centroid: [-9.5665454864502E-06, -0.0671069267116126, 0.14008754491806]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Joint Pivotron - Basic (90 offset) Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Geometry model created; Size: [0.252500474452972, 5.00000095367432, 0.252500921487808], LD [0.252500116825104, 0.252500057220459, 0], UD [0.252500116825104, 0.252500057220459, 0]

Surface area: 3.96626284861222

Fineness Ratio: 19.8019292376794

TaperRatio: 1

Cross Sectional Area: 0.0500743184887066

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.999998229571468

Centroid: [-1.61975622177124E-05, -3.88622283935547E-05, 2.72989273071289E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

RoboTube Pro - 5m: Choosing up axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: RoboTube Pro - 5m Transforms: 3

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Geometry model created; Size: [0.0688988044857979, 0.0688988268375397, 0.0722610801458359], LD [0.0688988044857979, 0.0722610801458359, 0], UD [0.0688988044857979, 0.0722610801458359, 0]

Surface area: 0.0152771730784799

Fineness Ratio: 0.976181399089916

TaperRatio: 1

Cross Sectional Area: 0.00391026343274321

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.953470448362351

Centroid: [8.92579555511475E-06, -1.64918601512909E-05, -0.00624994933605194]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Quantum Strut: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Quantum Strut Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW BT-LXL Battery Bank: Geometry model created; Size: [0.505456268787384, 2.08407258987427, 0.304163157939911], LD [0.50545608997345, 0.304162979125977, 0], UD [0.421604931354523, 0.159065514802933, 0]

Surface area: 2.27566311674613

Fineness Ratio: 5.14827713138916

TaperRatio: 0.717214389235372

Cross Sectional Area: 0.120748036416724

Cross Sectional Tapered Area: 0.0624990150763287

Major-minor axis ratio: 1.66179320405149

Centroid: [3.51071357727051E-05, 0.0882571860293667, -0.305229074321687]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Illuminator Mk1: Geometry model created; Size: [0.390253901481628, 0.382898062467575, 0.499424695968628], LD [0.390253901481628, 0.499424695968628, 0], UD [0.376956284046173, 0.479681730270386, 0]

Surface area: 0.525165315407744

Fineness Ratio: 0.860755925937588

TaperRatio: 0.962862337895518

Cross Sectional Area: 0.153076015353084

Cross Sectional Tapered Area: 0.0113292348300492

Major-minor axis ratio: 0.781406896038122

Centroid: [-9.60677862167358E-05, 0.0303795750512511, 0.0642140656709671]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW BT-LXL Battery Bank: Geometry model created; Size: [0.505456328392029, 2.08407258987427, 0.304163098335266], LD [0.505456209182739, 0.304162979125977, 0], UD [0.421604931354523, 0.159065559506416, 0]

Surface area: 2.27566338504295

Fineness Ratio: 5.14827713138916

TaperRatio: 0.717214338847319

Cross Sectional Area: 0.120748026993511

Cross Sectional Tapered Area: 0.0624990427836555

Major-minor axis ratio: 1.66179372566387

Centroid: [3.03387641906738E-05, 0.0882561860733871, -0.305218346300535]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Illuminator Mk1: Geometry model created; Size: [0.390253901481628, 0.382898092269897, 0.499424695968628], LD [0.390253901481628, 0.499424695968628, 0], UD [0.376956284046173, 0.479681760072708, 0]

Surface area: 0.525165365245611

Fineness Ratio: 0.860755992933293

TaperRatio: 0.96286237139337

Cross Sectional Area: 0.153076015353084

Cross Sectional Tapered Area: 0.0113292248045191

Major-minor axis ratio: 0.781406896038122

Centroid: [1.17719173431396E-05, 0.0305156398138876, 0.0640913993120193]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW BT-LXL Battery Bank: Geometry model created; Size: [0.505456209182739, 2.08407211303711, 0.304163187742233], LD [0.50545608997345, 0.304163008928299, 0], UD [0.4216049015522, 0.159065574407578, 0]

Surface area: 2.2756626936354

Fineness Ratio: 5.14827614296954

TaperRatio: 0.717214399644795

Cross Sectional Area: 0.120748034008876

Cross Sectional Tapered Area: 0.0624990177557933

Major-minor axis ratio: 1.66179284526402

Centroid: [2.89678573608398E-05, 0.0883350966363263, -0.305229919147678]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Illuminator Mk1: Geometry model created; Size: [0.390253901481628, 0.382898092269897, 0.499424695968628], LD [0.390253901481628, 0.499424695968628, 0], UD [0.376956284046173, 0.479681730270386, 0]

Surface area: 0.525165356283234

Fineness Ratio: 0.860755992933293

TaperRatio: 0.962862337895518

Cross Sectional Area: 0.153076015353084

Cross Sectional Tapered Area: 0.0113292348300492

Major-minor axis ratio: 0.781406896038122

Centroid: [-2.91913747787476E-05, 0.0304770284558702, 0.0643134862184525]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

KW BT-LXL Battery Bank: Geometry model created; Size: [0.505456209182739, 2.08407211303711, 0.304163128137589], LD [0.50545608997345, 0.304162949323654, 0], UD [0.421604931354523, 0.159065544605255, 0]

Surface area: 2.27566259607294

Fineness Ratio: 5.14827652198861

TaperRatio: 0.717214452446554

Cross Sectional Area: 0.120748010346763

Cross Sectional Tapered Area: 0.0624989988052913

Major-minor axis ratio: 1.66179317091352

Centroid: [1.79708003997803E-05, 0.0882470909428874, -0.305212095787283]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: KW BT-LXL Battery Bank Transforms: 5

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Illuminator Mk1: Geometry model created; Size: [0.390253841876984, 0.38289800286293, 0.499424666166306], LD [0.390253841876984, 0.499424666166306, 0], UD [0.376956254243851, 0.479681730270386, 0]

Surface area: 0.525165197807265

Fineness Ratio: 0.860755878446599

TaperRatio: 0.962862401159133

Cross Sectional Area: 0.153075982838776

Cross Sectional Tapered Area: 0.0113292136189348

Major-minor axis ratio: 0.781406823320639

Centroid: [-0.000147819519042969, 0.0302305232453438, 0.0640213191509247]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Illuminator Mk1 Transforms: 4

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.4394326210022, 1.87913250923157, 1.48801743984222], LD [6.23807859420776, 0.122253119945526, 0], UD [6.23807907104492, 0.12225604057312, 0]

Surface area: 18.7740152041716

Fineness Ratio: 0.47408245900231

TaperRatio: 1.00000053416471

Cross Sectional Area: 7.52567581046446

Cross Sectional Tapered Area: 8.4858378274658E-06

Major-minor axis ratio: 4.32752496616234

Centroid: [-6.29502445459366, -1.46331261718924E-06, -0.000147223472595215]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.43945550918579, 1.79607629776001, 1.59084630012512], LD [6.23811292648315, 0.118992269039154, 0], UD [6.238112449646, 0.118986248970032, 0]

Surface area: 17.9351013354677

Fineness Ratio: 0.447324730853206

TaperRatio: 0.999998978008688

Cross Sectional Area: 8.04576327680693

Cross Sectional Tapered Area: 1.62190593807777E-05

Major-minor axis ratio: 4.04781750988723

Centroid: [-6.29502522945404, 7.69212146061182E-05, 3.40938568115234E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.43943643569946, 1.87975466251373, 1.48719263076782], LD [6.2381010055542, 0.122279047966003, 0], UD [6.2381010055542, 0.122277617454529, 0]

Surface area: 18.7803666103467

Fineness Ratio: 0.474288539744044

TaperRatio: 0.999999775090252

Cross Sectional Area: 7.52150877898002

Cross Sectional Tapered Area: 3.57301014717864E-06

Major-minor axis ratio: 4.32992761157971

Centroid: [-6.29502157866955, -1.95517312154836E-05, -6.2108039855957E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.43948173522949, 1.79546451568604, 1.59155440330505], LD [6.23812246322632, 0.118961930274963, 0], UD [6.23812294006348, 0.118967175483704, 0]

Surface area: 17.9289508181154

Fineness Ratio: 0.447131474622815

TaperRatio: 1.00000090010539

Cross Sectional Area: 8.04937731716363

Cross Sectional Tapered Area: 1.42846431377239E-05

Major-minor axis ratio: 4.04603306167677

Centroid: [-6.29506320506334, 2.9949194015999E-05, 5.71012496948242E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: PresMat Barometer Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

PresMat Barometer: Geometry model created; Size: [0.175093531608582, 0.249387353658676, 0.127397358417511], LD [0.175093531608582, 0.127397358417511, 0], UD [0.175093531608582, 0.127397358417511, 0]

Surface area: 0.118496794859063

Fineness Ratio: 1.64889166504925

TaperRatio: 1

Cross Sectional Area: 0.017519447534569

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 1.37438902802646

Centroid: [1.27702951431274E-05, 0.00729510933160782, -0.0879082605242729]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: PresMat Barometer Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Double-C Seismic Accelerometer Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Double-C Seismic Accelerometer: Geometry model created; Size: [0.150624245405197, 0.201858580112457, 0.17329715192318], LD [0.150624245405197, 0.17329715192318, 0], UD [0.150624245405197, 0.17329715192318, 0]

Surface area: 0.102708580805743

Fineness Ratio: 1.24634298183039

TaperRatio: 1

Cross Sectional Area: 0.0205010540610629

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.869167460247511

Centroid: [4.57540154457092E-05, 0.0139931365847588, -0.139672473073006]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Double-C Seismic Accelerometer Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: GRAVMAX Negative Gravioli Detector Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

GRAVMAX Negative Gravioli Detector: Geometry model created; Size: [0.140205383300781, 0.203849881887436, 0.163572981953621], LD [0.140205383300781, 0.163572981953621, 0], UD [0.140205383300781, 0.163572981953621, 0]

Surface area: 0.0972718513701974

Fineness Ratio: 1.34209611482187

TaperRatio: 1

Cross Sectional Area: 0.0180121743212346

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 0.857142674946983

Centroid: [1.69724225997925E-05, 0.00887633115053177, -0.136483208276331]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: GRAVMAX Negative Gravioli Detector Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: 2HOT Thermometer Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

2HOT Thermometer: Geometry model created; Size: [0.0913634151220322, 0.269624561071396, 0.0743734911084175], LD [0.0913634151220322, 0.0743734911084175, 0], UD [0.0913634151220322, 0.0743734911084175, 0]

Surface area: 0.0701937679841872

Fineness Ratio: 3.25364539744087

TaperRatio: 1

Cross Sectional Area: 0.0053367931983502

Cross Sectional Tapered Area: 0

Major-minor axis ratio: 1.22844058763959

Centroid: [2.36816704273224E-05, -0.00183376669883728, -0.0427046716213226]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: 2HOT Thermometer Transforms: 2

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Comms DTS-M1: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Comms DTS-M1 Transforms: 21

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Comms DTS-M1: Geometry model created; Size: [0.229270756244659, 0.955002844333649, 0.0772207081317902], LD [0.228896617889404, 0.0658561438322067, 0], UD [0.229270756244659, 0.0769409239292145, 0]

Surface area: 0.450757874845106

Fineness Ratio: 6.23183974324754

TaperRatio: 1.03887637349124

Cross Sectional Area: 0.0139050426326542

Cross Sectional Tapered Area: 0.00135214197533867

Major-minor axis ratio: 2.96903203546606

Centroid: [0.0104370266199112, -0.039820389702371, -0.0132673047482967]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Comms DTS-M1: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Comms DTS-M1 Transforms: 21

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Comms DTS-M1: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Comms DTS-M1 Transforms: 21

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Comms DTS-M1: Geometry model created; Size: [0.229270771145821, 0.955002665519714, 0.0772205591201782], LD [0.228896647691727, 0.0659990236163139, 0], UD [0.229270771145821, 0.0769409388303757, 0]

Surface area: 0.450865003183221

Fineness Ratio: 6.23184130324915

TaperRatio: 1.03837302398493

Cross Sectional Area: 0.0139050167040463

Cross Sectional Tapered Area: 0.00133559988740003

Major-minor axis ratio: 2.96903795774137

Centroid: [0.0104486793279648, -0.0399242742297876, -0.0134087279438972]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Comms DTS-M1: Choosing heuristic forward axis for FAR drag model.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Comms DTS-M1 Transforms: 21

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.4394326210022, 1.87931156158447, 1.48777985572815], LD [6.23807859420776, 0.122259974479675, 0], UD [6.23807907104492, 0.122262835502625, 0]

Surface area: 18.7758242250507

Fineness Ratio: 0.474141841687991

TaperRatio: 1.00000052479283

Cross Sectional Area: 7.52447422439942

Cross Sectional Tapered Area: 8.33697242461531E-06

Major-minor axis ratio: 4.32821603022082

Centroid: [-6.29502445459366, -1.46336853756868E-06, -0.000147163867950439]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.43945598602295, 1.79619693756104, 1.59070670604706], LD [6.23811292648315, 0.118997156620026, 0], UD [6.23811340332031, 0.118991076946259, 0]

Surface area: 17.9363210612257

Fineness Ratio: 0.447362527121605

TaperRatio: 0.999999118650372

Cross Sectional Area: 8.04505787038857

Cross Sectional Tapered Area: 1.39870904700234E-05

Major-minor axis ratio: 4.04817302997681

Centroid: [-6.2950257062912, 7.69669079809798E-05, 3.40938568115234E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.43943691253662, 1.87993395328522, 1.48695540428162], LD [6.23810148239136, 0.122285902500153, 0], UD [6.2381010055542, 0.122284471988678, 0]

Surface area: 18.782178824876

Fineness Ratio: 0.474347944977785

TaperRatio: 0.999999700120682

Cross Sectional Area: 7.52030955778907

Cross Sectional Tapered Area: 4.76401884229282E-06

Major-minor axis ratio: 4.33061872198357

Centroid: [-6.29502205550671, -1.95756724213902E-05, -6.2108039855957E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Part: Gigantor XL Solar Array Transforms: 8

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Gigantor XL Solar Array: Geometry model created; Size: [6.43948221206665, 1.79558491706848, 1.59141516685486], LD [6.23812341690063, 0.118966817855835, 0], UD [6.23812341690063, 0.118972063064575, 0]

Surface area: 17.9301689117034

Fineness Ratio: 0.447169184799026

TaperRatio: 1.00000082509585

Cross Sectional Area: 8.04867371685862

Cross Sectional Tapered Area: 1.30942677502395E-05

Major-minor axis ratio: 4.04638735773338

Centroid: [-6.2950636819005, 2.99263288683349E-05, 5.71012496948242E-05]

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Tac.FuelBalanceController[FFDD1E76][3989.00]: Rebuilding resource lists.

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Game Paused!

(Filename: C:/BuildAgent/work/d3d49558e4d408f4/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 53)

Any FF entries are from Final Frontier and can (probably) safely be ignored, same with KAC, Clouds etc... If you want the persistent.sfs file, I'll upload it, but the craft in questions has pFairings, KW Rocketry, Quantum Struts and Wolf Aerospace mod parts on it. I can probably remove the mod parts (apart from KWR and QS) if this'll be a problem.

Note: this log is an excerpt made from deleting the entire output_log.txt, going to tracking centre, loading craft and then deleting a whole bunch af unrelated entries from Active Texture Management, Final Frontier, SCANsat, loads of bool parsing and whole bunch of other irrelevant entries. If you want a complete and full log, let me know, but be prepared to wade through a whole bunch of unrelated stuff...

I'm shocked that you of all people are having problems.

Not quite sure what to make of that...

Edited June 21, 2014 by ObsessedWithKSP

sirkut · June 21, 2014

Has nothing to do with the problem but let me guess, you are using RSS's KSC Switcher?

The parts load fine in the VAB correct? Toolbar loads fine?

I'd like to see the logfile of the initial loading of the game up to you loading the VAB.

BudgetHedgehog · June 21, 2014

Has nothing to do with the problem but let me guess, you are using RSS's KSC Switcher?

Negative, no RSS on my system at all.

The parts load fine in the VAB correct? Toolbar loads fine?
I'd like to see the logfile of the initial loading of the game up to you loading the VAB.

I'll PM you the results of this tomorrow or something - I'm pretty drunk and I want to fly a a plane right now but I'll get things sorted out for you tomorrow. Don't know if I saved the craft but hopefully I did.. I can't remember if the IR button was visible then.. Toolbar loads fine, as far as I can tell.

BlackSoldierB · June 21, 2014

You can but you aren't making any sense. The update to 0.16 is independent to the parts.

I deorbited my space station, because that contained the non-tweaksclale parts.

Well they are, but all in the same node towards the end of the tree (go back to R&D to unlock if they haven't already). I'm open to suggestions of proper placement though.

I thinks i am not that far in the tech tree, but maybe some part could fit in the "Actuator" node (where the grabbing unit is).

Edit: found them, its just one node after the "Actuators" and "Specialized Construction".

Edited June 21, 2014 by BlackSoldierB

gescheit · June 22, 2014

Please, add ability to lock uncontrolled pivotrons by default.

MK3424 · June 22, 2014

Models looks good but are the model rework the ne parts or just the legacy parts?

sirkut · June 22, 2014

Models looks good but are the model rework the ne parts or just the legacy parts?

Eventually they will replace the legacy parts.

loppnessmonsta · June 23, 2014

Idk if anyone has suggested this yet, but would you consider making some Connected Living Space-compatible parts? By which I mean hinges/rotatrons with a 1.5m tube at their center through which kerbals could conceivably move. I'd love to make docking arms that fold up AND allow internal passage to the main hull of the ship.

Camacha · June 24, 2014

I have finally been able to toy with these on my freshly installed computer and I must say I am really enjoying the hinges. The different types are nice, the availability of scaling is excellent and the tweakables are equally useful. Nice one!

[WIP] MSI's Infernal Robotics - Model Rework (v02 Pre-Release Beta)

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation