Energia project v1.5A / MIR v4

[DECQ]

  On 2/22/2016 at 2:56 PM, crberus said:

Yes, i mean these green points for attaching things:)

Expand  

Today MIR check again, in any case, send the cfg new, but I gathered it in orbit and had no problems ...

  On 2/22/2016 at 4:17 PM, Kaleaze said:

The problem with MechJeb is that the Buran doesn't reach orbit, at least not with default options, the rocket starts to go down and there's no way to make it stable again.

Expand  

The rocket goes down after the end of the second stage of the work? If so, I think this is due to the fact that the central unit is too 
easy, it can be corrected making it heavier, but for this increase Isp for the RD 0120.
If so, I'll try to fix it.

[crberus]

  On 2/23/2016 at 7:15 AM, DECQ said:

Today MIR check again, in any case, send the cfg new, but I gathered it in orbit and had no problems ...

The rocket goes down after the end of the second stage of the work? If so, I think this is due to the fact that the central unit is too 
easy, it can be corrected making it heavier, but for this increase Isp for the RD 0120.
If so, I'll try to fix it.

Expand  

I don't know, maybe KJR cause this problem with Joints. All parts are pretty balanced and you don't need to fix it. But, maybe, you could increase payload for Vulkan from 100 tons to 150 tons

[DECQ]

  On 2/23/2016 at 7:27 AM, crberus said:

I don't know, maybe KJR cause this problem with Joints. All parts are pretty balanced and you don't need to fix it. But, maybe, you could increase payload for Vulkan from 100 tons to 150 tons

Expand  

KJR I installed and it has no problems with the MIR, it means that something prevented. Watch on Vulkan.

[crberus]

  On 2/23/2016 at 7:41 AM, DECQ said:

KJR I installed and it has no problems with the MIR, it means that something prevented. Watch on Vulkan.

Expand  

I'll send a screenshot later, maybe it will help you. About Vulkan, it was just a suggestion to meet a bit closer real-life supposed payload mass, at this moment Vulkan works very well.

[Kaleaze]

  On 2/23/2016 at 7:15 AM, DECQ said:

Today MIR check again, in any case, send the cfg new, but I gathered it in orbit and had no problems ...

The rocket goes down after the end of the second stage of the work? If so, I think this is due to the fact that the central unit is too 
easy, it can be corrected making it heavier, but for this increase Isp for the RD 0120.
If so, I'll try to fix it.

Expand  

No, the problem was MechJeb, not Buran, I've tried with the settings that crberus use and it worked very nice. I think the problem was the ascent path or something like that.

[DECQ]

  On 2/23/2016 at 4:01 PM, Kaleaze said:

No, the problem was MechJeb, not Buran, I've tried with the settings that crberus use and it worked very nice. I think the problem was the ascent path or something like that.

Expand  

That's great, thank you cerberus!  

I think that is another problem.

  On 2/23/2016 at 1:38 PM, crberus said:

 

Expand  

Yes, MIR core there is a problem, points are wrong I will correct it.

 

 

  On 2/23/2016 at 1:38 PM, crberus said:

 

Expand  

[raidernick]

You need to either put MIR in it's original folder structure or change the names of all the parts. Right now it will conflict with the original mod and any other versions someone has installed because you changed the folder it's in but left the part names the same.

The original folder is SovietPack/Parts/MIR, you have just MIR so someone who installs this will end up with

GameData/MIR

instead of

GameData/SovietPack/Parts/MIR

Edited February 23, 2016 by raidernick

[DECQ]

  On 2/23/2016 at 7:41 PM, raidernick said:

You need to either put MIR in it's original folder structure or change the names of all the parts. Right now it will conflict with the original mod and any other versions someone has installed because you changed the folder it's in but left the part names the same.

The original folder is SovietPack/Parts/MIR, you have just MIR so someone who installs this will end up with

GameData/MIR

instead of

GameData/SovietPack/Parts/MIR

Expand  

Yes, I will change the structure of MIR folder, return it to its original position and pull out of a total add-on, just short of time for this ...

 

 

 

That change cfg module, replace the file in the folder MIR_core.

https://www.dropbox.com/sh/ydnru0hraqzgolv/AAAMRaKbbvsZIx8g4IbbYg0Va?dl=0

Edited February 23, 2016 by DECQ

[Kaleaze]

Ok, I've managed to get into orbit with Mechjeb, but when I go there and tried release the sciencelab it got stuck inside the cargobay. I've tried using the manipulator arm but it just exploded it all. I've tried that using the EN_BURAN (Stock). Am I doing something wrong?

[DECQ]

  On 2/24/2016 at 7:15 PM, Kaleaze said:

Ok, I've managed to get into orbit with Mechjeb, but when I go there and tried release the sciencelab it got stuck inside the cargobay. I've tried using the manipulator arm but it just exploded it all. I've tried that using the EN_BURAN (Stock). Am I doing something wrong?

Expand  

No, not you. I made the wrong cfg for Cargo adapter.

Put it in BURAN_FULL / CARGO folder
Sorry for the inconvenience, there was a large renovation and has not seen for such trifles ...

https://www.dropbox.com/s/ntxv0csc0kr1zax/CARGO%20CFG.zip?dl=0

[Kaleaze]

  On 2/25/2016 at 11:43 AM, DECQ said:

No, not you. I made the wrong cfg for Cargo adapter.

Put it in BURAN_FULL / CARGO folder
Sorry for the inconvenience, there was a large renovation and has not seen for such trifles ...

https://www.dropbox.com/s/ntxv0csc0kr1zax/CARGO%20CFG.zip?dl=0

Expand  

Ok, thanks, I'll try that.

[Kaleaze]

Still didn't work, the things got stuck inside, there's no way to take it out.

[Deltac]

Tried the newer Mir Core config, and there's still two nodes that aren't functioning correctly.

[crberus]

  On 2/25/2016 at 7:50 PM, Kaleaze said:

Still didn't work, the things got stuck inside, there's no way to take it out.

Expand  

Could you test it with any other payload with smaller diameter? I'd test it myself, but have no time till tomorrow's evening.

Edited February 26, 2016 by crberus

[DECQ]

I looked at all the problems of Mir, an update is available on the first page, all of the nodes in the MIR works, also fixed the problem with Fuselase, it is present in the update for ENERGIA, but that you do have to download  to take it from here.
Replace in BURAN_FULL / FUSELASE_AND_DOOR folder.
Also, if you build a MIR station when a new version is deleted.

https://www.dropbox.com/sh/8s7uqc4fbalvpjp/AADQdjkYY8iL_vtbXXXqyaAoa?dl=0

[DECQ]

crberus

I checked the control surface and found no errors.

[DECQ]

  On 2/25/2016 at 7:50 PM, Kaleaze said:

Still didn't work, the things got stuck inside, there's no way to take it out.

Expand  

Here's a quick photo, trying as much as possible like your payload, and now everything is working, but not build the payload to 2.5m Engine mout unit, only to cargo segment.

[crberus]

  On 2/26/2016 at 1:31 PM, DECQ said:

crberus

I checked the control surface and found no errors.

Expand  

As i said before, it was a problem with Mechjeb, not with Buran. Problem is so, that Buran's tail fin should be open, when Mechjeb takes control over, otherwise it'll roll uncontrollably.

[crberus]

Mir Core Module is perfect, but there's a problem with other modules. When i try to attach solar panels to them, panels get sink under the surface of modules "Kvant-2" and "Kristall" (Maybe, there's the same trouble with "Kvant", didn't check yet). And "Spektr" seems totally wrong, as you can see on this screenshot under spoiler.

  Reveal hidden contents

 

[Kerbal01]

the dropbox link for "CRAFT ENERGIA ADDON" returns a 404 error, indicating that it might have been deleted or moved. can you look into this.

also, is the zenit first stage tank supposed to attach directly to the RD-120? i tried that and they do not separate, even though decouplers fire. 

Just found the zenit interstage, buried on the second to last row on the last page of the structural tab.

Can you provide more documentation on how to use this pack?. And craft files for each configuration of each rocket?

something else I thought of. Did you get permission from Bobcat to redistribute his Mir Pack? It is Licensed under All Rights Reserved.  

Edited February 28, 2016 by DarthVader

[DECQ]

  On 2/27/2016 at 5:10 PM, DarthVader said:

the dropbox link for "CRAFT ENERGIA ADDON" returns a 404 error, indicating that it might have been deleted or moved. can you look into this.

also, is the zenit first stage tank supposed to attach directly to the RD-120? i tried that and they do not separate, even though decouplers fire. 

Just found the zenit interstage, buried on the second to last row on the last page of the structural tab.

Can you provide more documentation on how to use this pack?. And craft files for each configuration of each rocket?

something else I thought of. Did you get permission from Bobcat to redistribute his Mir Pack? It is Licensed under All Rights Reserved.  

Expand  

1. Strange why they flew.
2. I would have gladly introduced the documentation, possibly the first country to make the add-on in a short time
3. No, Rys said that "Its free float. Not planned to update 1.0.5."

So I took it from the add-on that let Dragon, not the old. If suddenly decide to Bobcat upgrade add-ons to 1.1, and he personally have any complaints, I will remove this link, no problem.

 

 

  On 2/27/2016 at 4:03 PM, crberus said:

Mir Core Module is perfect, but there's a problem with other modules. When i try to attach solar panels to them, panels get sink under the surface of modules "Kvant-2" and "Kristall" (Maybe, there's the same trouble with "Kvant", didn't check yet). And "Spektr" seems totally wrong, as you can see on this screenshot under spoiler.

  Reveal hidden contents

 

Expand  

Check, repair it.

Edited February 29, 2016 by DECQ

[DECQ]

  On 2/27/2016 at 4:03 PM, crberus said:

Mir Core Module is perfect, but there's a problem with other modules. When i try to attach solar panels to them, panels get sink under the surface of modules "Kvant-2" and "Kristall" (Maybe, there's the same trouble with "Kvant", didn't check yet). And "Spektr" seems totally wrong, as you can see on this screenshot under spoiler.

  Reveal hidden contents

 

Expand  

Look at the fix. It should fix the problem.

https://www.dropbox.com/sh/umpw8l9tdv4vsbd/AACeybJS-EDZ-i2rqh5qK2vAa?dl=0

Again I added a link to Craft files.

See the first page.

[crberus]

  On 3/3/2016 at 10:21 AM, DECQ said:

Look at the fix. It should fix the problem.

https://www.dropbox.com/sh/umpw8l9tdv4vsbd/AACeybJS-EDZ-i2rqh5qK2vAa?dl=0

Again I added a link to Craft files.

See the first page.

Expand  

Thank you, i'll test it later. Hopefully, tonight.

[crberus]

  On 3/3/2016 at 10:21 AM, DECQ said:

Look at the fix. It should fix the problem.

https://www.dropbox.com/sh/umpw8l9tdv4vsbd/AACeybJS-EDZ-i2rqh5qK2vAa?dl=0

Again I added a link to Craft files.

See the first page.

Expand  

I've tested this fix. It really fixes Spektr, but every other module seems to be broken, but, as i can see, it can be fixed the same way, as you fixed Spektr. Some screenshots under spoiler, as usual.

  Reveal hidden contents

P.S. I don't know, if you're interested, but i'd be very happy to see Bobcat's Soyuz working again:)

Edited March 4, 2016 by crberus

[DECQ]

  On 3/4/2016 at 4:34 PM, crberus said:

I've tested this fix. It really fixes Spektr, but every other module seems to be broken, but, as i can see, it can be fixed the same way, as you fixed Spektr. Some screenshots under spoiler, as usual.

  Reveal hidden contents

P.S. I don't know, if you're interested, but i'd be very happy to see Bobcat's Soyuz working again:)

Expand  

Damn, it's trouble, I will look at the problem.

As for the Soyuz, this will come down ??